diff --git a/docs/plat/hikey960.md b/docs/plat/hikey960.md
new file mode 100644
index 0000000..786a54b
--- /dev/null
+++ b/docs/plat/hikey960.md
@@ -0,0 +1,134 @@
+
+Description
+====================
+ HiKey960 is one of 96boards. Hisilicon Hi3660 processor is installed on HiKey960.
+
+ More information are listed in [link](http://www.96boards.org/documentation/ConsumerEdition/HiKey960/README.md).
+
+
+How to build
+====================
+
+1. Code Locations
+-----------------
+
+ * ARM Trusted Firmware:
+ [link](https://github.com/ARM-software/arm-trusted-firmware)
+
+ * edk2:
+ [link](https://github.com/96boards-hikey/edk2/tree/testing/hikey960_v2.5)
+
+ * OpenPlatformPkg:
+ [link](https://github.com/96boards-hikey/OpenPlatformPkg/tree/testing/hikey960_v1.3.4)
+
+ * l-loader:
+ [link](https://github.com/96boards-hikey/l-loader/tree/testing/hikey960_v1.2)
+
+ * uefi-tools:
+ [link](https://github.com/96boards-hikey/uefi-tools/tree/hikey960_v1)
+
+
+2. Build Procedure
+------------------
+
+ * Fetch all the above 5 repositories into local host.
+ Make all the repositories in the same ${BUILD_PATH}.
+
+ * Create the symbol link to OpenPlatformPkg in edk2.
+
`$cd ${BUILD_PATH}/edk2`
+
`$ln -sf ../OpenPlatformPkg`
+
+ * Prepare AARCH64 toolchain.
+
+ * If your hikey960 hardware is v1, update _uefi-tools/platform.config_ first. _(optional)_
+
__Uncomment the below sentence. Otherwise, UEFI can't output messages on serial
+ console on hikey960 v1.__
+
`BUILDFLAGS=-DSERIAL_BASE=0xFDF05000`
+
If your hikey960 hardware is v2 or newer, nothing to do.
+
+ * Build it as debug mode. Create script file for build.
+
`BUILD_OPTION=DEBUG`
+
`export AARCH64_TOOLCHAIN=GCC48`
+
`export UEFI_TOOLS_DIR=${BUILD_PATH}/uefi-tools`
+
`export EDK2_DIR=${BUILD_PATH}/edk2`
+
`EDK2_OUTPUT_DIR=${EDK2_DIR}/Build/HiKey960/${BUILD_OPTION}_${AARCH64_TOOLCHAIN}`
+
`cd ${EDK2_DIR}`
+
`# Build UEFI & ARM Trust Firmware`
+
`${UEFI_TOOLS_DIR}/uefi-build.sh -b ${BUILD_OPTION} -a ../arm-trusted-firmware hikey960`
+
`# Generate l-loader.bin`
+
`cd ${BUILD_PATH}/l-loader`
+
`ln -sf ${EDK2_OUTPUT_DIR}/FV/bl1.bin`
+
`ln -sf ${EDK2_OUTPUT_DIR}/FV/fip.bin`
+
`ln -sf ${EDK2_OUTPUT_DIR}/FV/BL33_AP_UEFI.fd`
+
`python gen_loader.py -o l-loader.bin --img_bl1=bl1.bin --img_ns_bl1u=BL33_AP_UEFI.fd`
+
+ * Generate partition table.
+
_Make sure that you're using the sgdisk in the l-loader directory._
+
`$PTABLE=aosp-32g SECTOR_SIZE=4096 SGDISK=./sgdisk bash -x generate_ptable.sh`
+
+
+3. Setup Console
+----------------
+
+ * Install ser2net. Use telnet as the console since UEFI will output window
+ that fails to display in minicom.
+
`$sudo apt-get install ser2net`
+
+ * Configure ser2net.
+
`$sudo vi /etc/ser2net.conf`
+
Append one line for serial-over-USB in below.
+
_#ser2net.conf_
+
`2004:telnet:0:/dev/ttyUSB0:115200 8DATABITS NONE 1STOPBIT banner`
+
+ * Open the console.
+
`$telnet localhost 2004`
+
And you could open the console remotely, too.
+
+
+4. Boot UEFI in recovery mode
+-----------------------------
+
+ * Fetch that are used in recovery mode. The code location is in below.
+ [link](https://github.com/96boards-hikey/tools-images-hikey960)
+
+ * Generate l-loader.bin.
+
`$cd tools-images-hikey960`
+
`$ln -sf ${BUILD_PATH}/l-loader/l-loader.bin`
+
+ * Prepare config file.
+
_$vi config_
+
_# The content of config file_
+
`./sec_user_xloader.img 0x00020000`
+
`./sec_uce_boot.img 0x6A908000`
+
`./l-loader.bin 0x1AC00000`
+
+ * Remove the modemmanager package. This package may causes hikey_idt tool failure.
+
`$sudo apt-get purge modemmanager`
+
+ * Run the command to download l-loader.bin into HiKey960.
+
`$sudo ./hikey_idt -c config -p /dev/ttyUSB1`
+
+ * UEFI running in recovery mode.
+
When prompt '.' is displayed on console, press hotkey 'f' in keyboard. Then Android fastboot app is running.
+
The timeout of prompt '.' is 10 seconds.
+
+ * Update images.
+
`$sudo fastboot flash ptable prm_ptable.img`
+
`$sudo fastboot flash xloader sec_xloader.img`
+
`$sudo fastboot flash fastboot l-loader.bin`
+
`$sudo fastboot flash fip fip.bin`
+
`$sudo fastboot flash boot boot.img`
+
`$sudo fastboot flash cache cache.img`
+
`$sudo fastboot flash system system.img`
+
`$sudo fastboot flash userdata userdata.img`
+
+ * Notice: UEFI could also boot kernel in recovery mode, but BL31 isn't loaded in
+ recovery mode.
+
+
+5. Boot UEFI in normal mode
+-----------------------------
+
+ * Make sure "Boot Mode" switch is OFF for normal boot mode. Then power on HiKey960.
+
+ * Reference [link](https://github.com/96boards-hikey/tools-images-hikey960/blob/master/build-from-source/README-ATF-UEFI-build-from-source.md)