diff --git a/plat/socionext/uniphier/include/platform_def.h b/plat/socionext/uniphier/include/platform_def.h
index 30e0924..7c6341d 100644
--- a/plat/socionext/uniphier/include/platform_def.h
+++ b/plat/socionext/uniphier/include/platform_def.h
@@ -28,16 +28,36 @@
 #define PLAT_MAX_OFF_STATE		U(2)
 #define PLAT_MAX_RET_STATE		U(1)
 
-#define BL2_BASE			ULL(0x80000000)
-#define BL2_LIMIT			ULL(0x80080000)
+#define UNIPHIER_BL2_OFFSET		UL(0x00000000)
+#define UNIPHIER_BL2_MAX_SIZE		UL(0x00080000)
 
-/* 0x80080000-0x81000000: reserved for DSP */
+/* 0x00080000-0x01000000: reserved for DSP */
 
-#define BL31_BASE			ULL(0x81000000)
-#define BL31_LIMIT			ULL(0x81080000)
+#define UNIPHIER_BL31_OFFSET		UL(0x01000000)
+#define UNIPHIER_BL31_MAX_SIZE		UL(0x00080000)
 
-#define BL32_BASE			ULL(0x81080000)
-#define BL32_LIMIT			ULL(0x81180000)
+#define UNIPHIER_BL32_OFFSET		UL(0x01080000)
+#define UNIPHIER_BL32_MAX_SIZE		UL(0x00100000)
+
+/*
+ * The link addresses are determined by UNIPHIER_MEM_BASE + offset.
+ * When ENABLE_PIE is set, all the TF images can be loaded anywhere, so
+ * UNIPHIER_MEM_BASE is arbitrary.
+ *
+ * When ENABLE_PIE is unset, UNIPHIER_MEM_BASE should be chosen so that
+ * BL2_BASE matches to the physical address where BL2 is loaded, that is,
+ * UNIPHIER_MEM_BASE should be the base address of the DRAM region.
+ */
+#define UNIPHIER_MEM_BASE		UL(0x00000000)
+
+#define BL2_BASE		(UNIPHIER_MEM_BASE + UNIPHIER_BL2_OFFSET)
+#define BL2_LIMIT		(BL2_BASE + UNIPHIER_BL2_MAX_SIZE)
+
+#define BL31_BASE		(UNIPHIER_MEM_BASE + UNIPHIER_BL31_OFFSET)
+#define BL31_LIMIT		(BL31_BASE + UNIPHIER_BL31_MAX_SIZE)
+
+#define BL32_BASE		(UNIPHIER_MEM_BASE + UNIPHIER_BL32_OFFSET)
+#define BL32_LIMIT		(BL32_BASE + UNIPHIER_BL32_MAX_SIZE)
 
 #define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 32)
 #define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 32)
diff --git a/plat/socionext/uniphier/platform.mk b/plat/socionext/uniphier/platform.mk
index 3c74fe6..8e96b68 100644
--- a/plat/socionext/uniphier/platform.mk
+++ b/plat/socionext/uniphier/platform.mk
@@ -9,6 +9,9 @@
 override PROGRAMMABLE_RESET_ADDRESS	:= 1
 override USE_COHERENT_MEM		:= 1
 override ENABLE_SVE_FOR_NS		:= 0
+
+# Disabling ENABLE_PIE saves memory footprint a lot, but you need to adjust
+# UNIPHIER_MEM_BASE so that all TF images are loaded at their link addresses.
 override ENABLE_PIE			:= 1
 
 # Cortex-A53 revision r0p4-51rel0
diff --git a/plat/socionext/uniphier/uniphier.h b/plat/socionext/uniphier/uniphier.h
index bbbcf7e..729dc5c 100644
--- a/plat/socionext/uniphier/uniphier.h
+++ b/plat/socionext/uniphier/uniphier.h
@@ -42,8 +42,9 @@
 int uniphier_usb_init(unsigned int soc,
 		      struct io_block_dev_spec **block_dev_spec);
 
-int uniphier_io_setup(unsigned int soc);
+int uniphier_io_setup(unsigned int soc, uintptr_t mem_base);
 
+void uniphier_init_image_descs(uintptr_t mem_base);
 struct image_info;
 struct image_info *uniphier_get_image_info(unsigned int image_id);
 
@@ -67,11 +68,4 @@
 
 unsigned int uniphier_calc_core_pos(u_register_t mpidr);
 
-#define UNIPHIER_BL33_BASE		0x84000000
-#define UNIPHIER_BL33_MAX_SIZE		0x00100000
-
-#define UNIPHIER_SCP_BASE		((UNIPHIER_BL33_BASE) + \
-					 (UNIPHIER_BL33_MAX_SIZE))
-#define UNIPHIER_SCP_MAX_SIZE		0x00020000
-
 #endif /* UNIPHIER_H */
diff --git a/plat/socionext/uniphier/uniphier_bl2_setup.c b/plat/socionext/uniphier/uniphier_bl2_setup.c
index 15022b3..11d837c 100644
--- a/plat/socionext/uniphier/uniphier_bl2_setup.c
+++ b/plat/socionext/uniphier/uniphier_bl2_setup.c
@@ -21,9 +21,10 @@
 
 #include "uniphier.h"
 
-#define UNIPHIER_IMAGE_BUF_BASE		0x84300000UL
+#define UNIPHIER_IMAGE_BUF_OFFSET	0x04300000UL
 #define UNIPHIER_IMAGE_BUF_SIZE		0x00100000UL
 
+static uintptr_t uniphier_mem_base = UNIPHIER_MEM_BASE;
 static int uniphier_bl2_kick_scp;
 
 void bl2_el3_early_platform_setup(u_register_t x0, u_register_t x1,
@@ -41,13 +42,16 @@
 	uniphier_mmap_setup();
 	enable_mmu_el3(0);
 
+	/* add relocation offset (run-time-address - link-address) */
+	uniphier_mem_base += BL_CODE_BASE - BL2_BASE;
+
 	soc = uniphier_get_soc_id();
 	if (soc == UNIPHIER_SOC_UNKNOWN) {
 		ERROR("unsupported SoC\n");
 		plat_error_handler(-ENOTSUP);
 	}
 
-	ret = uniphier_io_setup(soc);
+	ret = uniphier_io_setup(soc, uniphier_mem_base);
 	if (ret) {
 		ERROR("failed to setup io devices\n");
 		plat_error_handler(ret);
@@ -110,19 +114,19 @@
 void bl2_plat_preload_setup(void)
 {
 #ifdef UNIPHIER_DECOMPRESS_GZIP
+	uintptr_t buf_base = uniphier_mem_base + UNIPHIER_IMAGE_BUF_OFFSET;
 	int ret;
 
-	ret = mmap_add_dynamic_region(UNIPHIER_IMAGE_BUF_BASE,
-				      UNIPHIER_IMAGE_BUF_BASE,
+	ret = mmap_add_dynamic_region(buf_base, buf_base,
 				      UNIPHIER_IMAGE_BUF_SIZE,
 				      MT_MEMORY | MT_RW | MT_NS);
 	if (ret)
 		plat_error_handler(ret);
 
-	image_decompress_init(UNIPHIER_IMAGE_BUF_BASE,
-			      UNIPHIER_IMAGE_BUF_SIZE,
-			      gunzip);
+	image_decompress_init(buf_base, UNIPHIER_IMAGE_BUF_SIZE, gunzip);
 #endif
+
+	uniphier_init_image_descs(uniphier_mem_base);
 }
 
 int bl2_plat_handle_pre_image_load(unsigned int image_id)
diff --git a/plat/socionext/uniphier/uniphier_image_desc.c b/plat/socionext/uniphier/uniphier_image_desc.c
index 817029a..8c232ba 100644
--- a/plat/socionext/uniphier/uniphier_image_desc.c
+++ b/plat/socionext/uniphier/uniphier_image_desc.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2020, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -13,13 +13,19 @@
 
 #include "uniphier.h"
 
+#define UNIPHIER_BL33_OFFSET		0x04000000UL
+#define UNIPHIER_BL33_MAX_SIZE		0x00100000UL
+
+#define UNIPHIER_SCP_OFFSET		0x04100000UL
+#define UNIPHIER_SCP_MAX_SIZE		0x00020000UL
+
 static struct bl_mem_params_node uniphier_image_descs[] = {
 	{
 		.image_id = SCP_BL2_IMAGE_ID,
 
 		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
 				      VERSION_2, image_info_t, 0),
-		.image_info.image_base = UNIPHIER_SCP_BASE,
+		.image_info.image_base = UNIPHIER_SCP_OFFSET,
 		.image_info.image_max_size = UNIPHIER_SCP_MAX_SIZE,
 
 		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
@@ -33,13 +39,13 @@
 
 		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
 				      VERSION_2, image_info_t, 0),
-		.image_info.image_base = BL31_BASE,
-		.image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+		.image_info.image_base = UNIPHIER_BL31_OFFSET,
+		.image_info.image_max_size = UNIPHIER_BL31_MAX_SIZE,
 
 		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
 				      VERSION_2, entry_point_info_t,
 				      SECURE | EXECUTABLE | EP_FIRST_EXE),
-		.ep_info.pc = BL31_BASE,
+		.ep_info.pc = UNIPHIER_BL31_OFFSET,
 		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
 					DISABLE_ALL_EXCEPTIONS),
 
@@ -55,13 +61,13 @@
 
 		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
 				      VERSION_2, image_info_t, 0),
-		.image_info.image_base = BL32_BASE,
-		.image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+		.image_info.image_base = UNIPHIER_BL32_OFFSET,
+		.image_info.image_max_size = UNIPHIER_BL32_MAX_SIZE,
 
 		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
 				      VERSION_2, entry_point_info_t,
 				      SECURE | EXECUTABLE),
-		.ep_info.pc = BL32_BASE,
+		.ep_info.pc = UNIPHIER_BL32_OFFSET,
 		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
 					DISABLE_ALL_EXCEPTIONS),
 
@@ -73,13 +79,13 @@
 
 		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
 				      VERSION_2, image_info_t, 0),
-		.image_info.image_base = UNIPHIER_BL33_BASE,
+		.image_info.image_base = UNIPHIER_BL33_OFFSET,
 		.image_info.image_max_size = UNIPHIER_BL33_MAX_SIZE,
 
 		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
 				      VERSION_2, entry_point_info_t,
 				      NON_SECURE | EXECUTABLE),
-		.ep_info.pc = UNIPHIER_BL33_BASE,
+		.ep_info.pc = UNIPHIER_BL33_OFFSET,
 		.ep_info.spsr = SPSR_64(MODE_EL2, MODE_SP_ELX,
 					DISABLE_ALL_EXCEPTIONS),
 
@@ -88,6 +94,21 @@
 };
 REGISTER_BL_IMAGE_DESCS(uniphier_image_descs)
 
+/*
+ * image_info.image_base and ep_info.pc are the offset from the memory base.
+ * When ENABLE_PIE is set, we never know the real memory base at link-time.
+ * Fix-up the addresses by adding the run-time detected base.
+ */
+void uniphier_init_image_descs(uintptr_t mem_base)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(uniphier_image_descs); i++) {
+		uniphier_image_descs[i].image_info.image_base += mem_base;
+		uniphier_image_descs[i].ep_info.pc += mem_base;
+	}
+}
+
 struct image_info *uniphier_get_image_info(unsigned int image_id)
 {
 	struct bl_mem_params_node *desc;
diff --git a/plat/socionext/uniphier/uniphier_io_storage.c b/plat/socionext/uniphier/uniphier_io_storage.c
index d151914..89c8718 100644
--- a/plat/socionext/uniphier/uniphier_io_storage.c
+++ b/plat/socionext/uniphier/uniphier_io_storage.c
@@ -26,7 +26,7 @@
 #define UNIPHIER_OCM_REGION_BASE	0x30000000ULL
 #define UNIPHIER_OCM_REGION_SIZE	0x00040000ULL
 
-#define UNIPHIER_BLOCK_BUF_BASE		0x84200000UL
+#define UNIPHIER_BLOCK_BUF_OFFSET	0x04200000UL
 #define UNIPHIER_BLOCK_BUF_SIZE		0x00100000UL
 
 static const io_dev_connector_t *uniphier_fip_dev_con;
@@ -317,7 +317,7 @@
 	[UNIPHIER_BOOT_DEVICE_USB] = uniphier_io_usb_setup,
 };
 
-int uniphier_io_setup(unsigned int soc_id)
+int uniphier_io_setup(unsigned int soc_id, uintptr_t mem_base)
 {
 	int (*io_setup)(unsigned int soc_id, size_t buffer_offset);
 	unsigned int boot_dev;
@@ -328,7 +328,7 @@
 		return -EINVAL;
 
 	io_setup = uniphier_io_setup_table[boot_dev];
-	ret = io_setup(soc_id, UNIPHIER_BLOCK_BUF_BASE);
+	ret = io_setup(soc_id, mem_base + UNIPHIER_BLOCK_BUF_OFFSET);
 	if (ret)
 		return ret;