diff --git a/include/lib/aarch64/arch_helpers.h b/include/lib/aarch64/arch_helpers.h index f9f0715..4d936ad 100644 --- a/include/lib/aarch64/arch_helpers.h +++ b/include/lib/aarch64/arch_helpers.h @@ -273,6 +273,7 @@ DEFINE_SYSREG_RW_FUNCS(vpidr_el2) DEFINE_SYSREG_RW_FUNCS(vmpidr_el2) +DEFINE_SYSREG_RW_FUNCS(cntp_ctl_el0) DEFINE_SYSREG_READ_FUNC(isr_el1) diff --git a/plat/mediatek/common/drivers/uart/8250_console.S b/plat/mediatek/common/drivers/uart/8250_console.S new file mode 100644 index 0000000..5b0ae6d --- /dev/null +++ b/plat/mediatek/common/drivers/uart/8250_console.S @@ -0,0 +1,172 @@ +/* + * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ +#include +#include + + .globl console_core_init + .globl console_core_putc + .globl console_core_getc + + /* ----------------------------------------------- + * int console_core_init(unsigned long base_addr, + * unsigned int uart_clk, unsigned int baud_rate) + * Function to initialize the console without a + * C Runtime to print debug information. This + * function will be accessed by console_init and + * crash reporting. + * In: x0 - console base address + * w1 - Uart clock in Hz + * w2 - Baud rate + * Out: return 1 on success else 0 on error + * Clobber list : x1, x2, x3 + * ----------------------------------------------- + */ +func console_core_init + /* Check the input base address */ + cbz x0, core_init_fail + /* Check baud rate and uart clock for sanity */ + cbz w1, core_init_fail + cbz w2, core_init_fail + + /* Disable interrupt */ + str wzr, [x0, #UART_IER] + + /* Force DTR and RTS to high */ + mov w3, #(UART_MCR_DTR | UART_MCR_RTS) + str w3, [x0, #UART_MCR] + + /* Check high speed */ + movz w3, #:abs_g1:115200 + movk w3, #:abs_g0_nc:115200 + cmp w2, w3 + b.hi 1f + + /* Non high speed */ + lsl w2, w2, #4 + mov w3, wzr + b 2f + + /* High speed */ +1: lsl w2, w2, #2 + mov w3, #2 + + /* Set high speed UART register */ +2: str w3, [x0, #UART_HIGHSPEED] + + /* Calculate divisor */ + udiv w3, w1, w2 /* divisor = uartclk / (quot * baudrate) */ + msub w1, w3, w2, w1 /* remainder = uartclk % (quot * baudrate) */ + lsr w2, w2, #1 + cmp w1, w2 + cinc w3, w3, hs + + /* Set line configuration, access divisor latches */ + mov w1, #(UART_LCR_DLAB | UART_LCR_WLS_8) + str w1, [x0, #UART_LCR] + + /* Set the divisor */ + and w1, w3, #0xff + str w1, [x0, #UART_DLL] + lsr w1, w3, #8 + and w1, w1, #0xff + str w1, [x0, #UART_DLH] + + /* Hide the divisor latches */ + mov w1, #UART_LCR_WLS_8 + str w1, [x0, #UART_LCR] + + /* Enable FIFOs, and clear receive and transmit */ + mov w1, #(UART_FCR_FIFO_EN | UART_FCR_CLEAR_RCVR | \ + UART_FCR_CLEAR_XMIT) + str w1, [x0, #UART_FCR] + + mov w0, #1 + ret +core_init_fail: + mov w0, wzr + ret +endfunc console_core_init + + /* -------------------------------------------------------- + * int console_core_putc(int c, unsigned long base_addr) + * Function to output a character over the console. It + * returns the character printed on success or -1 on error. + * In : w0 - character to be printed + * x1 - console base address + * Out : return -1 on error else return character. + * Clobber list : x2 + * -------------------------------------------------------- + */ +func console_core_putc + /* Check the input parameter */ + cbz x1, putc_error + /* Prepend '\r' to '\n' */ + cmp w0, #0xA + b.ne 2f + + /* Check if the transmit FIFO is full */ +1: ldr w2, [x1, #UART_LSR] + and w2, w2, #UART_LSR_THRE + cbz w2, 1b + mov w2, #0xD + str w2, [x1, #UART_THR] + + /* Check if the transmit FIFO is full */ +2: ldr w2, [x1, #UART_LSR] + and w2, w2, #UART_LSR_THRE + cbz w2, 2b + str w0, [x1, #UART_THR] + ret +putc_error: + mov w0, #-1 + ret +endfunc console_core_putc + + /* --------------------------------------------- + * int console_core_getc(unsigned long base_addr) + * Function to get a character from the console. + * It returns the character grabbed on success + * or -1 on error. + * In : x0 - console base address + * Clobber list : x0, x1 + * --------------------------------------------- + */ +func console_core_getc + cbz x0, getc_error + + /* Check if the receive FIFO is empty */ +1: ldr w1, [x0, #UART_LSR] + tbz w1, #UART_LSR_DR, 1b + ldr w0, [x0, #UART_RBR] + ret +getc_error: + mov w0, #-1 + ret +endfunc console_core_getc diff --git a/plat/mediatek/common/drivers/uart/uart8250.h b/plat/mediatek/common/drivers/uart/uart8250.h new file mode 100644 index 0000000..b0f5b8d --- /dev/null +++ b/plat/mediatek/common/drivers/uart/uart8250.h @@ -0,0 +1,62 @@ +/* + * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef __UART8250_H__ +#define __UART8250_H__ + +/* UART register */ +#define UART_RBR 0x00 /* Receive buffer register */ +#define UART_DLL 0x00 /* Divisor latch lsb */ +#define UART_THR 0x00 /* Transmit holding register */ +#define UART_DLH 0x04 /* Divisor latch msb */ +#define UART_IER 0x04 /* Interrupt enable register */ +#define UART_FCR 0x08 /* FIFO control register */ +#define UART_LCR 0x0c /* Line control register */ +#define UART_MCR 0x10 /* Modem control register */ +#define UART_LSR 0x14 /* Line status register */ +#define UART_HIGHSPEED 0x24 /* High speed UART */ + +/* FCR */ +#define UART_FCR_FIFO_EN 0x01 /* enable FIFO */ +#define UART_FCR_CLEAR_RCVR 0x02 /* clear the RCVR FIFO */ +#define UART_FCR_CLEAR_XMIT 0x04 /* clear the XMIT FIFO */ + +/* LCR */ +#define UART_LCR_WLS_8 0x03 /* 8 bit character length */ +#define UART_LCR_DLAB 0x80 /* divisor latch access bit */ + +/* MCR */ +#define UART_MCR_DTR 0x01 +#define UART_MCR_RTS 0x02 + +/* LSR */ +#define UART_LSR_DR 0x01 /* Data ready */ +#define UART_LSR_THRE 0x20 /* Xmit holding register empty */ + +#endif /* __UART8250_H__ */ diff --git a/plat/mediatek/mt6795/aarch64/plat_helpers.S b/plat/mediatek/mt6795/aarch64/plat_helpers.S new file mode 100644 index 0000000..eb0611a --- /dev/null +++ b/plat/mediatek/mt6795/aarch64/plat_helpers.S @@ -0,0 +1,158 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ +#include +#include +#include + + .globl plat_secondary_cold_boot_setup + .globl plat_report_exception + .globl platform_is_primary_cpu + .globl plat_crash_console_init + .globl plat_crash_console_putc + .globl platform_mem_init + + + .macro crash_ram_log + /* + * Check teearg->atf_log_buf_size. + * Exit if atf_log_buf_size equals 0 + */ + adr x2, ptr_atf_crash_flag + ldr x2, [x2] + /* exit if ptr_atf_crash_flag equals NULL */ + cbz x2, exit_putc + + /* + * set atf crash magic number + */ +1: + adr x2, ptr_atf_crash_flag + ldr x2, [x2] + mov_imm x1, 0xdead1abf + /* p_atf_log_ctrl->atf_crash_flag = 0xdead1abf */ + str w1, [x2] + /* can't use w3 return addr, w4, start of buffer addr */ + ldr w2, [x2] + cmp w2, w1 + b.ne 1b + + /* + * get cpu id + */ + mrs x1, mpidr_el1 + /* refer to platform_get_core_pos */ + and x2, x1, #MPIDR_CPU_MASK + and x1, x1, #MPIDR_CLUSTER_MASK + /* x1 = cpu id (cpu id = aff0 + aff1*4 ) */ + add x1, x2, x1, LSR #6 + + adr x2, ptr_atf_except_write_pos_per_cpu + ldr x2, [x2] + /* + * plus (cpu_id * 8)--> + * &p_atf_log_ctrl->atf_except_write_pos_per_cpu[cpu_id] + * x2 = &p_atf_log_ctrl->atf_except_write_pos_per_cpu[cpu_id]; + */ + add x2, x2, x1, LSL # 3 + /* log write */ + /* w1 = p_atf_log_ctrl->atf_except_write_pos_per_cpu[cpu_id] */ + ldr x1, [x2] + /* *x1 = w0--> + * *(p_atf_log_ctrl->atf_except_write_pos_per_cpu[cpu_id]) = c) + */ + strb w0, [x1] + /* w1++ */ + add x1, x1, #1 + /* p_atf_log_ctrl->atf_except_write_pos_per_cpu[cpu_id] = w1 */ + str x1, [x2] +exit_putc: + .endm + + /* ----------------------------------------------------- + * void plat_secondary_cold_boot_setup (void); + * + * This function performs any platform specific actions + * needed for a secondary cpu after a cold reset e.g + * mark the cpu's presence, mechanism to place it in a + * holding pen etc. + * ----------------------------------------------------- + */ +func plat_secondary_cold_boot_setup + /* Do not do cold boot for secondary CPU */ +cb_panic: + b cb_panic +endfunc plat_secondary_cold_boot_setup + +func platform_is_primary_cpu + and x0, x0, #(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK) + cmp x0, #PLAT_PRIMARY_CPU + cset x0, eq + ret +endfunc platform_is_primary_cpu + + /* --------------------------------------------- + * int plat_crash_console_init(void) + * Function to initialize the crash console + * without a C Runtime to print crash report. + * Clobber list : x0, x1, x2 + * --------------------------------------------- + */ +func plat_crash_console_init + mov_imm x0, UART0_BASE + mov_imm x1, UART_CLOCK + mov_imm x2, UART_BAUDRATE + b console_init + ret +endfunc plat_crash_console_init + + /* --------------------------------------------- + * int plat_crash_console_putc(void) + * Function to print a character on the crash + * console without a C Runtime. + * Clobber list : x1, x2 + * --------------------------------------------- + */ +func plat_crash_console_putc + mov_imm x1, UART0_BASE + b console_core_putc + ret +endfunc plat_crash_console_putc + + /* -------------------------------------------------------- + * void platform_mem_init (void); + * + * Any memory init, relocation to be done before the + * platform boots. Called very early in the boot process. + * -------------------------------------------------------- + */ +func platform_mem_init + ret +endfunc platform_mem_init + diff --git a/plat/mediatek/mt6795/bl31.ld.S b/plat/mediatek/mt6795/bl31.ld.S new file mode 100644 index 0000000..44510a7 --- /dev/null +++ b/plat/mediatek/mt6795/bl31.ld.S @@ -0,0 +1,198 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#include + +OUTPUT_FORMAT(PLATFORM_LINKER_FORMAT) +OUTPUT_ARCH(PLATFORM_LINKER_ARCH) +ENTRY(bl31_entrypoint) + + +MEMORY { + RAM (rwx): ORIGIN = BL31_BASE, LENGTH = BL31_TZRAM_SIZE + RAM2 (rwx): ORIGIN = TZRAM2_BASE, LENGTH = TZRAM2_SIZE +} + + +SECTIONS +{ + . = BL31_BASE; + + ASSERT(. == ALIGN(2048), + "vector base is not aligned on a 2K boundary.") + + __RO_START__ = .; + vector . : { + *(.vectors) + } >RAM + + ASSERT(. == ALIGN(4096), + "BL31_BASE address is not aligned on a page boundary.") + + ro . : { + *bl31_entrypoint.o(.text*) + *(.text*) + *(.rodata*) + + /* Ensure 8-byte alignment for descriptors and ensure inclusion */ + . = ALIGN(8); + __RT_SVC_DESCS_START__ = .; + KEEP(*(rt_svc_descs)) + __RT_SVC_DESCS_END__ = .; + + /* + * Ensure 8-byte alignment for cpu_ops so that its fields are also + * aligned. Also ensure cpu_ops inclusion. + */ + . = ALIGN(8); + __CPU_OPS_START__ = .; + KEEP(*(cpu_ops)) + __CPU_OPS_END__ = .; + + __RO_END_UNALIGNED__ = .; + /* + * Memory page(s) mapped to this section will be marked as read-only, + * executable. No RW data from the next section must creep in. + * Ensure the rest of the current memory page is unused. + */ + . = NEXT(4096); + __RO_END__ = .; + } >RAM + + ASSERT(__CPU_OPS_END__ > __CPU_OPS_START__, + "cpu_ops not defined for this platform.") + + /* + * Define a linker symbol to mark start of the RW memory area for this + * image. + */ + __RW_START__ = . ; + + .data . : { + __DATA_START__ = .; + *(.data*) + __DATA_END__ = .; + } >RAM + +#ifdef BL31_PROGBITS_LIMIT + ASSERT(. <= BL31_PROGBITS_LIMIT, "BL3-1 progbits has exceeded its limit.") +#endif + + stacks (NOLOAD) : { + __STACKS_START__ = .; + *(tzfw_normal_stacks) + __STACKS_END__ = .; + } >RAM + + /* + * The .bss section gets initialised to 0 at runtime. + * Its base address must be 16-byte aligned. + */ + .bss (NOLOAD) : ALIGN(16) { + __BSS_START__ = .; + *(.bss*) + *(COMMON) +#if !USE_COHERENT_MEM + /* + * Bakery locks are stored in normal .bss memory + * + * Each lock's data is spread across multiple cache lines, one per CPU, + * but multiple locks can share the same cache line. + * The compiler will allocate enough memory for one CPU's bakery locks, + * the remaining cache lines are allocated by the linker script + */ + . = ALIGN(CACHE_WRITEBACK_GRANULE); + __BAKERY_LOCK_START__ = .; + *(bakery_lock) + . = ALIGN(CACHE_WRITEBACK_GRANULE); + __PERCPU_BAKERY_LOCK_SIZE__ = ABSOLUTE(. - __BAKERY_LOCK_START__); + . = . + (__PERCPU_BAKERY_LOCK_SIZE__ * (PLATFORM_CORE_COUNT - 1)); + __BAKERY_LOCK_END__ = .; +#ifdef PLAT_PERCPU_BAKERY_LOCK_SIZE + ASSERT(__PERCPU_BAKERY_LOCK_SIZE__ == PLAT_PERCPU_BAKERY_LOCK_SIZE, + "PLAT_PERCPU_BAKERY_LOCK_SIZE does not match bakery lock requirements"); +#endif +#endif + __BSS_END__ = .; + __RW_END__ = .; + } >RAM + + ASSERT(. <= BL31_LIMIT, "BL3-1 image has exceeded its limit.") + + /* + * The xlat_table section is for full, aligned page tables (4K). + * Removing them from .bss avoids forcing 4K alignment on + * the .bss section and eliminates the unecessary zero init + */ + xlat_table (NOLOAD) : { + *(xlat_table) + } >RAM2 + +#if USE_COHERENT_MEM + /* + * The base address of the coherent memory section must be page-aligned (4K) + * to guarantee that the coherent data are stored on their own pages and + * are not mixed with normal data. This is required to set up the correct + * memory attributes for the coherent data page tables. + */ + coherent_ram (NOLOAD) : ALIGN(4096) { + __COHERENT_RAM_START__ = .; + /* + * Bakery locks are stored in coherent memory + * + * Each lock's data is contiguous and fully allocated by the compiler + */ + *(bakery_lock) + *(tzfw_coherent_mem) + __COHERENT_RAM_END_UNALIGNED__ = .; + /* + * Memory page(s) mapped to this section will be marked + * as device memory. No other unexpected data must creep in. + * Ensure the rest of the current memory page is unused. + */ + . = NEXT(4096); + __COHERENT_RAM_END__ = .; + } >RAM2 +#endif + + /* + * Define a linker symbol to mark end of the RW memory area for this + * image. + */ + __BL31_END__ = .; + + __BSS_SIZE__ = SIZEOF(.bss); +#if USE_COHERENT_MEM + __COHERENT_RAM_UNALIGNED_SIZE__ = + __COHERENT_RAM_END_UNALIGNED__ - __COHERENT_RAM_START__; +#endif + + ASSERT(. <= TZRAM2_LIMIT, "TZRAM2 image has exceeded its limit.") +} diff --git a/plat/mediatek/mt6795/bl31_plat_setup.c b/plat/mediatek/mt6795/bl31_plat_setup.c new file mode 100644 index 0000000..3a8612d --- /dev/null +++ b/plat/mediatek/mt6795/bl31_plat_setup.c @@ -0,0 +1,492 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +/******************************************************************************* + * Declarations of linker defined symbols which will help us find the layout + * of trusted SRAM + ******************************************************************************/ +unsigned long __RO_START__; +unsigned long __RO_END__; + +unsigned long __COHERENT_RAM_START__; +unsigned long __COHERENT_RAM_END__; + +/* + * The next 2 constants identify the extents of the code & RO data region. + * These addresses are used by the MMU setup code and therefore they must be + * page-aligned. It is the responsibility of the linker script to ensure that + * __RO_START__ and __RO_END__ linker symbols refer to page-aligned addresses. + */ +#define BL31_RO_BASE (unsigned long)(&__RO_START__) +#define BL31_RO_LIMIT (unsigned long)(&__RO_END__) + +/* + * The next 2 constants identify the extents of the coherent memory region. + * These addresses are used by the MMU setup code and therefore they must be + * page-aligned. It is the responsibility of the linker script to ensure that + * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols + * refer to page-aligned addresses. + */ +#define BL31_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__) +#define BL31_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__) + +/* + * Placeholder variables for copying the arguments that have been passed to + * BL3-1 from BL2. + */ +static entry_point_info_t bl32_image_ep_info; +static entry_point_info_t bl33_image_ep_info; + +static const int cci_map[] = { + PLAT_MT_CCI_CLUSTER0_SL_IFACE_IX, + PLAT_MT_CCI_CLUSTER1_SL_IFACE_IX +}; + +static uint32_t cci_map_length = ARRAY_SIZE(cci_map); + +/* Table of regions to map using the MMU. */ +static const mmap_region_t plat_mmap[] = { + /* for TF text, RO, RW */ + MAP_REGION_FLAT(MTK_DEV_RNG0_BASE, MTK_DEV_RNG0_SIZE, + MT_DEVICE | MT_RW | MT_SECURE), + MAP_REGION_FLAT(MTK_DEV_RNG1_BASE, MTK_DEV_RNG1_SIZE, + MT_DEVICE | MT_RW | MT_SECURE), + MAP_REGION_FLAT(RAM_CONSOLE_BASE & ~(PAGE_SIZE_MASK), RAM_CONSOLE_SIZE, + MT_DEVICE | MT_RW | MT_NS), + { 0 } + +}; + +/******************************************************************************* + * Macro generating the code for the function setting up the pagetables as per + * the platform memory map & initialize the mmu, for the given exception level + ******************************************************************************/ +#define DEFINE_CONFIGURE_MMU_EL(_el) \ + void plat_configure_mmu_el ## _el(unsigned long total_base, \ + unsigned long total_size, \ + unsigned long ro_start, \ + unsigned long ro_limit, \ + unsigned long coh_start, \ + unsigned long coh_limit) \ + { \ + mmap_add_region(total_base, total_base, \ + total_size, \ + MT_MEMORY | MT_RW | MT_SECURE); \ + mmap_add_region(ro_start, ro_start, \ + ro_limit - ro_start, \ + MT_MEMORY | MT_RO | MT_SECURE); \ + mmap_add_region(coh_start, coh_start, \ + coh_limit - coh_start, \ + MT_DEVICE | MT_RW | MT_SECURE); \ + mmap_add(plat_mmap); \ + init_xlat_tables(); \ + \ + enable_mmu_el ## _el(0); \ + } + +/* Define EL3 variants of the function initialising the MMU */ +DEFINE_CONFIGURE_MMU_EL(3) + +unsigned int plat_get_syscnt_freq2(void) +{ + return SYS_COUNTER_FREQ_IN_TICKS; +} + +void plat_cci_init(void) +{ + /* Initialize CCI driver */ + cci_init(PLAT_MT_CCI_BASE, cci_map, cci_map_length); +} + +void plat_cci_enable(void) +{ + /* + * Enable CCI coherency for this cluster. + * No need for locks as no other cpu is active at the moment. + */ + cci_enable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr())); +} + +void plat_cci_disable(void) +{ + cci_disable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr())); +} + + +static void platform_setup_cpu(void) +{ + /* setup big cores */ + mmio_write_32((uintptr_t)&mt6795_mcucfg->mp1_config_res, + MP1_DIS_RGU0_WAIT_PD_CPUS_L1_ACK | + MP1_DIS_RGU1_WAIT_PD_CPUS_L1_ACK | + MP1_DIS_RGU2_WAIT_PD_CPUS_L1_ACK | + MP1_DIS_RGU3_WAIT_PD_CPUS_L1_ACK | + MP1_DIS_RGU_NOCPU_WAIT_PD_CPUS_L1_ACK); + mmio_setbits_32((uintptr_t)&mt6795_mcucfg->mp1_miscdbg, MP1_AINACTS); + mmio_setbits_32((uintptr_t)&mt6795_mcucfg->mp1_clkenm_div, + MP1_SW_CG_GEN); + mmio_clrbits_32((uintptr_t)&mt6795_mcucfg->mp1_rst_ctl, + MP1_L2RSTDISABLE); + + /* set big cores arm64 boot mode */ + mmio_setbits_32((uintptr_t)&mt6795_mcucfg->mp1_cpucfg, + MP1_CPUCFG_64BIT); + + /* set LITTLE cores arm64 boot mode */ + mmio_setbits_32((uintptr_t)&mt6795_mcucfg->mp0_rv_addr[0].rv_addr_hw, + MP0_CPUCFG_64BIT); +} + +/******************************************************************************* + * Return a pointer to the 'entry_point_info' structure of the next image for + * the security state specified. BL33 corresponds to the non-secure image type + * while BL32 corresponds to the secure image type. A NULL pointer is returned + * if the image does not exist. + ******************************************************************************/ +entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type) +{ + entry_point_info_t *next_image_info; + + next_image_info = (type == NON_SECURE) ? + &bl33_image_ep_info : &bl32_image_ep_info; + + /* None of the images on this platform can have 0x0 as the entrypoint */ + if (next_image_info->pc) + return next_image_info; + else + return NULL; +} + +/******************************************************************************* + * Perform any BL3-1 early platform setup. Here is an opportunity to copy + * parameters passed by the calling EL (S-EL1 in BL2 & S-EL3 in BL1) before they + * are lost (potentially). This needs to be done before the MMU is initialized + * so that the memory layout can be used while creating page tables. + * BL2 has flushed this information to memory, so we are guaranteed to pick up + * good data. + ******************************************************************************/ +void bl31_early_platform_setup(bl31_params_t *from_bl2, + void *plat_params_from_bl2) +{ + struct mtk_bl_param_t *pmtk_bl_param = + (struct mtk_bl_param_t *)from_bl2; + struct atf_arg_t *teearg; + unsigned long long normal_base; + unsigned long long atf_base; + + assert(from_bl2 != NULL); + /* + * Mediatek preloader(i.e, BL2) is in 32 bit state, high 32bits + * of 64 bit GP registers are UNKNOWN if CPU warm reset from 32 bit + * to 64 bit state. So we need to clear high 32bit, + * which may be random value. + */ + pmtk_bl_param = + (struct mtk_bl_param_t *)((uint64_t)pmtk_bl_param & 0x00000000ffffffff); + plat_params_from_bl2 = + (void *)((uint64_t)plat_params_from_bl2 & 0x00000000ffffffff); + + teearg = (struct atf_arg_t *)pmtk_bl_param->tee_info_addr; + + console_init(teearg->atf_log_port, UART_CLOCK, UART_BAUDRATE); + memcpy((void *)>eearg, (void *)teearg, sizeof(struct atf_arg_t)); + + normal_base = 0; + /* in ATF boot time, timer for cntpct_el0 is not initialized + * so it will not count now. + */ + atf_base = read_cntpct_el0(); + sched_clock_init(normal_base, atf_base); + + VERBOSE("bl31_setup\n"); + + /* Populate entry point information for BL3-2 and BL3-3 */ + SET_PARAM_HEAD(&bl32_image_ep_info, + PARAM_EP, + VERSION_1, + 0); + SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE); + bl32_image_ep_info.pc = BL32_BASE; + + SET_PARAM_HEAD(&bl33_image_ep_info, + PARAM_EP, + VERSION_1, + 0); + /* + * Tell BL3-1 where the non-trusted software image + * is located and the entry state information + */ + /* BL33_START_ADDRESS */ + bl33_image_ep_info.pc = pmtk_bl_param->bl33_start_addr; + bl33_image_ep_info.spsr = plat_get_spsr_for_bl33_entry(); + bl33_image_ep_info.args.arg4 = pmtk_bl_param->bootarg_loc; + bl33_image_ep_info.args.arg5 = pmtk_bl_param->bootarg_size; + SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE); +} +/******************************************************************************* + * Perform any BL3-1 platform setup code + ******************************************************************************/ + +void bl31_platform_setup(void) +{ + platform_setup_cpu(); + + generic_delay_timer_init(); + + plat_mt_gic_driver_init(); + /* Initialize the gic cpu and distributor interfaces */ + plat_mt_gic_init(); + + /* Topologies are best known to the platform. */ + mt_setup_topology(); +} +/******************************************************************************* + * Perform the very early platform specific architectural setup here. At the + * moment this is only intializes the mmu in a quick and dirty way. + * Init MTK propiartary log buffer control field. + ******************************************************************************/ +void bl31_plat_arch_setup(void) +{ + /* Enable non-secure access to CCI-400 registers */ + mmio_write_32(CCI400_BASE + CCI_SEC_ACCESS_OFFSET, 0x1); + + plat_cci_init(); + plat_cci_enable(); + + if (gteearg.atf_log_buf_size != 0) { + INFO("mmap atf buffer : 0x%x, 0x%x\n\r", + gteearg.atf_log_buf_start, + gteearg.atf_log_buf_size); + + mmap_add_region( + gteearg.atf_log_buf_start & + ~(PAGE_SIZE_2MB_MASK), + gteearg.atf_log_buf_start & + ~(PAGE_SIZE_2MB_MASK), + PAGE_SIZE_2MB, + MT_DEVICE | MT_RW | MT_NS); + + INFO("mmap atf buffer (force 2MB aligned):0x%x, 0x%x\n", + (gteearg.atf_log_buf_start & ~(PAGE_SIZE_2MB_MASK)), + PAGE_SIZE_2MB); + } + /* + * add TZRAM_BASE to memory map + * then set RO and COHERENT to different attribute + */ + plat_configure_mmu_el3( + (TZRAM_BASE & ~(PAGE_SIZE_MASK)), + (TZRAM_SIZE & ~(PAGE_SIZE_MASK)), + (BL31_RO_BASE & ~(PAGE_SIZE_MASK)), + BL31_RO_LIMIT, + BL31_COHERENT_RAM_BASE, + BL31_COHERENT_RAM_LIMIT); + /* Initialize for ATF log buffer */ + if (gteearg.atf_log_buf_size != 0) { + gteearg.atf_aee_debug_buf_size = ATF_AEE_BUFFER_SIZE; + gteearg.atf_aee_debug_buf_start = + gteearg.atf_log_buf_start + + gteearg.atf_log_buf_size - ATF_AEE_BUFFER_SIZE; + INFO("ATF log service is registered (0x%x, aee:0x%x)\n", + gteearg.atf_log_buf_start, + gteearg.atf_aee_debug_buf_start); + } else{ + gteearg.atf_aee_debug_buf_size = 0; + gteearg.atf_aee_debug_buf_start = 0; + } + + /* Platform code before bl31_main */ + /* compatible to the earlier chipset */ + + /* Show to ATF log buffer & UART */ + INFO("BL3-1: %s\n", version_string); + INFO("BL3-1: %s\n", build_message); + +} +#if 0 +/* MTK Define */ +#define ACTLR_CPUECTLR_BIT (1 << 1) + +void enable_ns_access_to_cpuectlr(void) +{ + unsigned int next_actlr; + + + /* ACTLR_EL1 do not implement CUPECTLR */ + next_actlr = read_actlr_el2(); + next_actlr |= ACTLR_CPUECTLR_BIT; + write_actlr_el2(next_actlr); + + next_actlr = read_actlr_el3(); + next_actlr |= ACTLR_CPUECTLR_BIT; + write_actlr_el3(next_actlr); +} +#endif +/******************************************************************************* + * This function prepare boot argument for 64 bit kernel entry + ******************************************************************************/ +static entry_point_info_t *bl31_plat_get_next_kernel64_ep_info(void) +{ + entry_point_info_t *next_image_info; + unsigned long el_status; + unsigned int mode; + + el_status = 0; + mode = 0; + + /* Kernel image is always non-secured */ + next_image_info = &bl33_image_ep_info; + + /* Figure out what mode we enter the non-secure world in */ + el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT; + el_status &= ID_AA64PFR0_ELX_MASK; + + if (el_status) { + INFO("Kernel_EL2\n"); + mode = MODE_EL2; + } else{ + INFO("Kernel_EL1\n"); + mode = MODE_EL1; + } + + INFO("Kernel is 64Bit\n"); + next_image_info->spsr = + SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS); + next_image_info->pc = get_kernel_info_pc(); + next_image_info->args.arg0 = get_kernel_info_r0(); + next_image_info->args.arg1 = get_kernel_info_r1(); + + INFO("pc=0x%lx, r0=0x%lx, r1=0x%lx\n", + next_image_info->pc, + next_image_info->args.arg0, + next_image_info->args.arg1); + + + SET_SECURITY_STATE(next_image_info->h.attr, NON_SECURE); + + /* None of the images on this platform can have 0x0 as the entrypoint */ + if (next_image_info->pc) + return next_image_info; + else + return NULL; +} + +/******************************************************************************* + * This function prepare boot argument for 32 bit kernel entry + ******************************************************************************/ +static entry_point_info_t *bl31_plat_get_next_kernel32_ep_info(void) +{ + entry_point_info_t *next_image_info; + unsigned int mode; + + mode = 0; + + /* Kernel image is always non-secured */ + next_image_info = &bl33_image_ep_info; + + /* Figure out what mode we enter the non-secure world in */ + mode = MODE32_hyp; + /* + * TODO: Consider the possibility of specifying the SPSR in + * the FIP ToC and allowing the platform to have a say as + * well. + */ + + INFO("Kernel is 32Bit\n"); + next_image_info->spsr = + SPSR_MODE32(mode, SPSR_T_ARM, SPSR_E_LITTLE, + (DAIF_FIQ_BIT | DAIF_IRQ_BIT | DAIF_ABT_BIT)); + next_image_info->pc = get_kernel_info_pc(); + next_image_info->args.arg0 = get_kernel_info_r0(); + next_image_info->args.arg1 = get_kernel_info_r1(); + next_image_info->args.arg2 = get_kernel_info_r2(); + + INFO("pc=0x%lx, r0=0x%lx, r1=0x%lx, r2=0x%lx\n", + next_image_info->pc, + next_image_info->args.arg0, + next_image_info->args.arg1, + next_image_info->args.arg2); + + + SET_SECURITY_STATE(next_image_info->h.attr, NON_SECURE); + + /* None of the images on this platform can have 0x0 as the entrypoint */ + if (next_image_info->pc) + return next_image_info; + else + return NULL; +} + +/******************************************************************************* + * This function prepare boot argument for kernel entrypoint + ******************************************************************************/ +void bl31_prepare_kernel_entry(uint64_t k32_64) +{ + entry_point_info_t *next_image_info; + uint32_t image_type; + + /* Determine which image to execute next */ + /* image_type = bl31_get_next_image_type(); */ + image_type = NON_SECURE; + + /* Program EL3 registers to enable entry into the next EL */ + if (k32_64 == 0) + next_image_info = bl31_plat_get_next_kernel32_ep_info(); + else + next_image_info = bl31_plat_get_next_kernel64_ep_info(); + + assert(next_image_info); + assert(image_type == GET_SECURITY_STATE(next_image_info->h.attr)); + + INFO("BL3-1: Preparing for EL3 exit to %s world, Kernel\n", + (image_type == SECURE) ? "secure" : "normal"); + INFO("BL3-1: Next image address = 0x%llx\n", + (unsigned long long) next_image_info->pc); + INFO("BL3-1: Next image spsr = 0x%x\n", next_image_info->spsr); + cm_init_context(read_mpidr_el1(), next_image_info); + cm_prepare_el3_exit(image_type); +} diff --git a/plat/mediatek/mt6795/drivers/timer/mt_cpuxgpt.c b/plat/mediatek/mt6795/drivers/timer/mt_cpuxgpt.c new file mode 100644 index 0000000..2430c47 --- /dev/null +++ b/plat/mediatek/mt6795/drivers/timer/mt_cpuxgpt.c @@ -0,0 +1,89 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include +#define CPUXGPT_BASE 0x10200000 +#define INDEX_BASE (CPUXGPT_BASE+0x0674) +#define CTL_BASE (CPUXGPT_BASE+0x0670) + +uint64_t normal_time_base; +uint64_t atf_time_base; + +void sched_clock_init(uint64_t normal_base, uint64_t atf_base) +{ + normal_time_base = normal_base; + atf_time_base = atf_base; +} + +uint64_t sched_clock(void) +{ + uint64_t cval; + + cval = (((read_cntpct_el0() - atf_time_base)*1000)/ + SYS_COUNTER_FREQ_IN_MHZ) + normal_time_base; + return cval; +} + +/* + * Return: 0 - Trying to disable the CPUXGPT control bit, + * and not allowed to disable it. + * Return: 1 - reg_addr is not realted to disable the control bit. + */ +unsigned char check_cpuxgpt_write_permission(unsigned int reg_addr, + unsigned int reg_value) +{ + unsigned int idx; + unsigned int ctl_val; + + if (reg_addr == CTL_BASE) { + idx = mmio_read_32(INDEX_BASE); + + /* idx 0: CPUXGPT system control */ + if (idx == 0) { + ctl_val = mmio_read_32(CTL_BASE); + if (ctl_val & 1) { + /* + * if enable bit already set, + * then bit 0 is not allow to set as 0 + */ + if (!(reg_value & 1)) + return 0; + } + } + } + return 1; +} + diff --git a/plat/mediatek/mt6795/drivers/timer/mt_cpuxgpt.h b/plat/mediatek/mt6795/drivers/timer/mt_cpuxgpt.h new file mode 100644 index 0000000..edd045c --- /dev/null +++ b/plat/mediatek/mt6795/drivers/timer/mt_cpuxgpt.h @@ -0,0 +1,52 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __MT_CPUXGPT_H__ +#define __MT_CPUXGPT_H__ + +/* REG */ +#define INDEX_CTL_REG 0x000 +#define INDEX_STA_REG 0x004 +#define INDEX_CNT_L_INIT 0x008 +#define INDEX_CNT_H_INIT 0x00C + +/* CTL_REG SET */ +#define EN_CPUXGPT 0x01 +#define EN_AHLT_DEBUG 0x02 +#define CLK_DIV1 (0x1 << 8) +#define CLK_DIV2 (0x2 << 8) +#define CLK_DIV4 (0x4 << 8) +#define CLK_DIV_MASK (~(0x7<<8)) + +void generic_timer_backup(void); +void sched_clock_init(uint64_t normal_base, uint64_t atf_base); +uint64_t sched_clock(void); + +#endif /* __MT_CPUXGPT_H__ */ diff --git a/plat/mediatek/mt6795/include/mcucfg.h b/plat/mediatek/mt6795/include/mcucfg.h new file mode 100644 index 0000000..879e7fa --- /dev/null +++ b/plat/mediatek/mt6795/include/mcucfg.h @@ -0,0 +1,180 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __MCUCFG_H__ +#define __MCUCFG_H__ + +#include +#include + +struct mt6795_mcucfg_regs { + uint32_t mp0_ca7l_cache_config; + struct { + uint32_t mem_delsel0; + uint32_t mem_delsel1; + } mp0_cpu[4]; + uint32_t mp0_cache_mem_delsel0; + uint32_t mp0_cache_mem_delsel1; + uint32_t mp0_axi_config; + uint32_t mp0_misc_config[2]; + struct { + uint32_t rv_addr_lw; + uint32_t rv_addr_hw; + } mp0_rv_addr[4]; + uint32_t mp0_ca7l_cfg_dis; + uint32_t mp0_ca7l_clken_ctrl; + uint32_t mp0_ca7l_rst_ctrl; + uint32_t mp0_ca7l_misc_config; + uint32_t mp0_ca7l_dbg_pwr_ctrl; + uint32_t mp0_rw_rsvd0; + uint32_t mp0_rw_rsvd1; + uint32_t mp0_ro_rsvd; + uint32_t reserved0_0[100]; + uint32_t mp1_cpucfg; + uint32_t mp1_miscdbg; + uint32_t reserved0_1[13]; + uint32_t mp1_rst_ctl; + uint32_t mp1_clkenm_div; + uint32_t reserved0_2[7]; + uint32_t mp1_config_res; + uint32_t reserved0_3[13]; + struct { + uint32_t rv_addr_lw; + uint32_t rv_addr_hw; + } mp1_rv_addr[2]; + uint32_t reserved0_4[84]; + uint32_t mp0_rst_status; /* 0x400 */ + uint32_t mp0_dbg_ctrl; + uint32_t mp0_dbg_flag; + uint32_t mp0_ca7l_ir_mon; + struct { + uint32_t pc_lw; + uint32_t pc_hw; + uint32_t fp_arch32; + uint32_t sp_arch32; + uint32_t fp_arch64_lw; + uint32_t fp_arch64_hw; + uint32_t sp_arch64_lw; + uint32_t sp_arch64_hw; + } mp0_dbg_core[4]; + uint32_t dfd_ctrl; + uint32_t dfd_cnt_l; + uint32_t dfd_cnt_h; + uint32_t misccfg_mp0_rw_rsvd; + uint32_t misccfg_sec_vio_status0; + uint32_t misccfg_sec_vio_status1; + uint32_t reserved1[22]; + uint32_t misccfg_rw_rsvd; /* 0x500 */ + uint32_t mcusys_dbg_mon_sel_a; + uint32_t mcusys_dbg_mon; + uint32_t reserved2[61]; + uint32_t mcusys_config_a; /* 0x600 */ + uint32_t mcusys_config1_a; + uint32_t mcusys_gic_peribase_a; + uint32_t reserved3; + uint32_t sec_range0_start; /* 0x610 */ + uint32_t sec_range0_end; + uint32_t sec_range_enable; + uint32_t reserved4; + uint32_t int_pol_ctl[8]; /* 0x620 */ + uint32_t aclken_div; /* 0x640 */ + uint32_t pclken_div; + uint32_t l2c_sram_ctrl; + uint32_t armpll_jit_ctrl; + uint32_t cci_addrmap; /* 0x650 */ + uint32_t cci_config; + uint32_t cci_periphbase; + uint32_t cci_nevntcntovfl; + uint32_t cci_clk_ctrl; /* 0x660 */ + uint32_t cci_acel_s1_ctrl; + uint32_t bus_fabric_dcm_ctrl; + uint32_t reserved5; + uint32_t xgpt_ctl; /* 0x670 */ + uint32_t xgpt_idx; + uint32_t ptpod2_ctl0; + uint32_t ptpod2_ctl1; + uint32_t mcusys_revid; + uint32_t mcusys_rw_rsvd0; + uint32_t mcusys_rw_rsvd1; +}; + +static struct mt6795_mcucfg_regs *const mt6795_mcucfg = (void *)MCUCFG_BASE; + +/* cpu boot mode */ +enum { + MP0_CPUCFG_64BIT_SHIFT = 12, + MP1_CPUCFG_64BIT_SHIFT = 28, + MP0_CPUCFG_64BIT = 0xf << MP0_CPUCFG_64BIT_SHIFT, + MP1_CPUCFG_64BIT = 0xf << MP1_CPUCFG_64BIT_SHIFT +}; + +/* scu related */ +enum { + MP0_ACINACTM_SHIFT = 4, + MP1_ACINACTM_SHIFT = 0, + MP0_ACINACTM = 1 << MP0_ACINACTM_SHIFT, + MP1_ACINACTM = 1 << MP1_ACINACTM_SHIFT +}; + +enum { + MP1_DIS_RGU0_WAIT_PD_CPUS_L1_ACK_SHIFT = 0, + MP1_DIS_RGU1_WAIT_PD_CPUS_L1_ACK_SHIFT = 4, + MP1_DIS_RGU2_WAIT_PD_CPUS_L1_ACK_SHIFT = 8, + MP1_DIS_RGU3_WAIT_PD_CPUS_L1_ACK_SHIFT = 12, + MP1_DIS_RGU_NOCPU_WAIT_PD_CPUS_L1_ACK_SHIFT = 16, + + MP1_DIS_RGU0_WAIT_PD_CPUS_L1_ACK = + 0xf << MP1_DIS_RGU0_WAIT_PD_CPUS_L1_ACK_SHIFT, + MP1_DIS_RGU1_WAIT_PD_CPUS_L1_ACK = + 0xf << MP1_DIS_RGU1_WAIT_PD_CPUS_L1_ACK_SHIFT, + MP1_DIS_RGU2_WAIT_PD_CPUS_L1_ACK = + 0xf << MP1_DIS_RGU2_WAIT_PD_CPUS_L1_ACK_SHIFT, + MP1_DIS_RGU3_WAIT_PD_CPUS_L1_ACK = + 0xf << MP1_DIS_RGU3_WAIT_PD_CPUS_L1_ACK_SHIFT, + MP1_DIS_RGU_NOCPU_WAIT_PD_CPUS_L1_ACK = + 0xf << MP1_DIS_RGU_NOCPU_WAIT_PD_CPUS_L1_ACK_SHIFT +}; + +enum { + MP1_AINACTS_SHIFT = 4, + MP1_AINACTS = 1 << MP1_AINACTS_SHIFT +}; + +enum { + MP1_SW_CG_GEN_SHIFT = 12, + MP1_SW_CG_GEN = 1 << MP1_SW_CG_GEN_SHIFT +}; + +enum { + MP1_L2RSTDISABLE_SHIFT = 14, + MP1_L2RSTDISABLE = 1 << MP1_L2RSTDISABLE_SHIFT +}; + +#endif /* __MCUCFG_H__ */ diff --git a/plat/mediatek/mt6795/include/plat_macros.S b/plat/mediatek/mt6795/include/plat_macros.S new file mode 100644 index 0000000..ef9d1d8 --- /dev/null +++ b/plat/mediatek/mt6795/include/plat_macros.S @@ -0,0 +1,110 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include + +.section .rodata.gic_reg_name, "aS" +gicc_regs: + .asciz "gicc_hppir", "gicc_ahppir", "gicc_ctlr", "" +gicd_pend_reg: + .asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n" \ + " Offset:\t\t\tvalue\n" +newline: + .asciz "\n" +spacer: + .asciz ":\t\t0x" + + /* --------------------------------------------- + * The below macro prints out relevant GIC + * registers whenever an unhandled exception is + * taken in BL3-1. + * Clobbers: x0 - x10, x16, x17, sp + * --------------------------------------------- + */ + .macro plat_crash_print_regs + mov_imm x16, BASE_GICD_BASE + mov_imm x17, BASE_GICC_BASE + /* Load the gicc reg list to x6 */ + adr x6, gicc_regs + /* Load the gicc regs to gp regs used by str_in_crash_buf_print */ + ldr w8, [x17, #GICC_HPPIR] + ldr w9, [x17, #GICC_AHPPIR] + ldr w10, [x17, #GICC_CTLR] + /* Store to the crash buf and print to console */ + bl str_in_crash_buf_print + + /* Print the GICD_ISPENDR regs */ + add x7, x16, #GICD_ISPENDR + adr x4, gicd_pend_reg + bl asm_print_str +gicd_ispendr_loop: + sub x4, x7, x16 + cmp x4, #0x280 + b.eq exit_print_gic_regs + bl asm_print_hex + + adr x4, spacer + bl asm_print_str + + ldr x4, [x7], #8 + bl asm_print_hex + + adr x4, newline + bl asm_print_str + b gicd_ispendr_loop +exit_print_gic_regs: + .endm + +.section .rodata.cci_reg_name, "aS" +cci_iface_regs: + .asciz "cci_snoop_ctrl_cluster0", "cci_snoop_ctrl_cluster1" , "" + + /* ------------------------------------------------ + * The below macro prints out relevant interconnect + * registers whenever an unhandled exception is + * taken in BL3-1. + * Clobbers: x0 - x9, sp + * ------------------------------------------------ + */ + .macro plat_print_interconnect_regs + adr x6, cci_iface_regs + /* Store in x7 the base address of the first interface */ + mov_imm x7, (PLAT_MT_CCI_BASE + SLAVE_IFACE_OFFSET( \ + PLAT_MT_CCI_CLUSTER0_SL_IFACE_IX)) + ldr w8, [x7, #SNOOP_CTRL_REG] + /* Store in x7 the base address of the second interface */ + mov_imm x7, (PLAT_MT_CCI_BASE + SLAVE_IFACE_OFFSET( \ + PLAT_MT_CCI_CLUSTER1_SL_IFACE_IX)) + ldr w9, [x7, #SNOOP_CTRL_REG] + /* Store to the crash buf and print to console */ + bl str_in_crash_buf_print + .endm diff --git a/plat/mediatek/mt6795/include/plat_private.h b/plat/mediatek/mt6795/include/plat_private.h new file mode 100644 index 0000000..7385c49 --- /dev/null +++ b/plat/mediatek/mt6795/include/plat_private.h @@ -0,0 +1,60 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __PLAT_PRIVATE_H__ +#define __PLAT_PRIVATE_H__ +#include +#include + +void plat_configure_mmu_el3(unsigned long total_base, + unsigned long total_size, + unsigned long, + unsigned long, + unsigned long, + unsigned long); + +void plat_cci_init(void); +void plat_cci_enable(void); +void plat_cci_disable(void); + +/* Declarations for plat_mt_gic.c */ +void plat_mt_gic_init(void); + +/* Declarations for plat_topology.c */ +int mt_setup_topology(void); +void plat_delay_timer_init(void); + +void plat_mt_gic_driver_init(void); +void plat_mt_gic_init(void); +void plat_mt_gic_cpuif_enable(void); +void plat_mt_gic_cpuif_disable(void); +void plat_mt_gic_pcpu_init(void); + +#endif /* __PLAT_PRIVATE_H__ */ diff --git a/plat/mediatek/mt6795/include/plat_sip_calls.h b/plat/mediatek/mt6795/include/plat_sip_calls.h new file mode 100644 index 0000000..a4844f4 --- /dev/null +++ b/plat/mediatek/mt6795/include/plat_sip_calls.h @@ -0,0 +1,39 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __PLAT_SIP_CALLS_H__ +#define __PLAT_SIP_CALLS_H__ + +/******************************************************************************* + * Plat SiP function constants + ******************************************************************************/ +#define MTK_PLAT_SIP_NUM_CALLS 0 + +#endif /* __PLAT_SIP_CALLS_H__ */ diff --git a/plat/mediatek/mt6795/include/platform_def.h b/plat/mediatek/mt6795/include/platform_def.h new file mode 100644 index 0000000..275333f --- /dev/null +++ b/plat/mediatek/mt6795/include/platform_def.h @@ -0,0 +1,266 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __PLATFORM_DEF_H__ +#define __PLATFORM_DEF_H__ + +#define PLAT_PRIMARY_CPU 0x0 + +/* Special value used to verify platform parameters from BL2 to BL3-1 */ +#define MT_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL + +#define IO_PHYS (0x10000000) +#define INFRACFG_AO_BASE (IO_PHYS + 0x1000) +#define MCUCFG_BASE (IO_PHYS + 0x200000) +#define PERI_BASE (IO_PHYS + 0x1000000) + + +#define GPIO_BASE (IO_PHYS + 0x370000) +#define SPM_BASE (IO_PHYS + 0x6000) +#define RGU_BASE (MCUCFG_BASE + 0x11000) +#define PMIC_WRAP_BASE (IO_PHYS + 0x10000) + +#define TRNG_base (MCUCFG_BASE + 0x230000) +#define MT_GIC_BASE (0x10220000) +#define MCU_SYS_SIZE (0x700000) +#define PLAT_MT_CCI_BASE (IO_PHYS + 0x390000) + +/* Aggregate of all devices in the first GB */ +#define MTK_DEV_RNG0_BASE IO_PHYS +#define MTK_DEV_RNG0_SIZE 0x400000 +#define MTK_DEV_RNG1_BASE (PERI_BASE) +#define MTK_DEV_RNG1_SIZE 0x4000000 + +/******************************************************************************* + * UART related constants + ******************************************************************************/ +#define UART0_BASE (PERI_BASE + 0x2000) + +#define UART_BAUDRATE (921600) +#define UART_CLOCK (26000000) + +/******************************************************************************* + * System counter frequency related constants + ******************************************************************************/ +#define SYS_COUNTER_FREQ_IN_TICKS 13000000 +#define SYS_COUNTER_FREQ_IN_MHZ (SYS_COUNTER_FREQ_IN_TICKS/1000000) + +/******************************************************************************* + * GIC-400 & interrupt handling related constants + ******************************************************************************/ + +/* Base MTK_platform compatible GIC memory map */ +#define BASE_GICD_BASE (MT_GIC_BASE+0x1000) +#define BASE_GICC_BASE (MT_GIC_BASE + 0x2000) +#define BASE_GICR_BASE (MT_GIC_BASE + 0x200000) +#define BASE_GICH_BASE (MT_GIC_BASE + 0x4000) +#define BASE_GICV_BASE (MT_GIC_BASE + 0x6000) + +#define INT_POL_CTL0 0x10200620 +#define GIC_PRIVATE_SIGNALS (32) + +/******************************************************************************* + * CCI-400 related constants + ******************************************************************************/ +#define PLAT_MT_CCI_CLUSTER0_SL_IFACE_IX 4 +#define PLAT_MT_CCI_CLUSTER1_SL_IFACE_IX 3 + +/******************************************************************************* + * WDT Registers + ******************************************************************************/ +#define MTK_WDT_BASE (RGU_BASE) +#define MTK_WDT_SIZE (0x1000) +#define MTK_WDT_MODE (MTK_WDT_BASE+0x0000) +#define MTK_WDT_LENGTH (MTK_WDT_BASE+0x0004) +#define MTK_WDT_RESTART (MTK_WDT_BASE+0x0008) +#define MTK_WDT_STATUS (MTK_WDT_BASE+0x000C) +#define MTK_WDT_INTERVAL (MTK_WDT_BASE+0x0010) +#define MTK_WDT_SWRST (MTK_WDT_BASE+0x0014) +#define MTK_WDT_SWSYSRST (MTK_WDT_BASE+0x0018) +#define MTK_WDT_NONRST_REG (MTK_WDT_BASE+0x0020) +#define MTK_WDT_NONRST_REG2 (MTK_WDT_BASE+0x0024) +#define MTK_WDT_REQ_MODE (MTK_WDT_BASE+0x0030) +#define MTK_WDT_REQ_IRQ_EN (MTK_WDT_BASE+0x0034) +#define MTK_WDT_DEBUG_CTL (MTK_WDT_BASE+0x0040) + +/*WDT_STATUS*/ +#define MTK_WDT_STATUS_HWWDT_RST (0x80000000) +#define MTK_WDT_STATUS_SWWDT_RST (0x40000000) +#define MTK_WDT_STATUS_IRQWDT_RST (0x20000000) +#define MTK_WDT_STATUS_DEBUGWDT_RST (0x00080000) +#define MTK_WDT_STATUS_SPMWDT_RST (0x0002) +#define MTK_WDT_STATUS_SPM_THERMAL_RST (0x0001) +#define MTK_WDT_STATUS_THERMAL_DIRECT_RST (1<<18) +#define MTK_WDT_STATUS_SECURITY_RST (1<<28) + +#define MTK_WDT_MODE_DUAL_MODE 0x0040 +#define MTK_WDT_MODE_IRQ 0x0008 +#define MTK_WDT_MODE_KEY 0x22000000 +#define MTK_WDT_MODE_EXTEN 0x0004 +#define MTK_WDT_SWRST_KEY 0x1209 +#define MTK_WDT_RESTART_KEY (0x1971) + +/* FIQ platform related define */ +#define MT_IRQ_SEC_SGI_0 8 +#define MT_IRQ_SEC_SGI_1 9 +#define MT_IRQ_SEC_SGI_2 10 +#define MT_IRQ_SEC_SGI_3 11 +#define MT_IRQ_SEC_SGI_4 12 +#define MT_IRQ_SEC_SGI_5 13 +#define MT_IRQ_SEC_SGI_6 14 +#define MT_IRQ_SEC_SGI_7 15 + +#define FIQ_SMP_CALL_SGI MT_IRQ_SEC_SGI_5 + +#define PLAT_ARM_G0_IRQS FIQ_SMP_CALL_SGI + +#define DEBUG_XLAT_TABLE 0 + +/******************************************************************************* + * Platform binary types for linking + ******************************************************************************/ +#define PLATFORM_LINKER_FORMAT "elf64-littleaarch64" +#define PLATFORM_LINKER_ARCH aarch64 + +/******************************************************************************* + * Generic platform constants + ******************************************************************************/ + +/* Size of cacheable stacks */ +#if DEBUG_XLAT_TABLE +#define PLATFORM_STACK_SIZE 0x800 +#elif IMAGE_BL1 +#define PLATFORM_STACK_SIZE 0x440 +#elif IMAGE_BL2 +#define PLATFORM_STACK_SIZE 0x400 +#elif IMAGE_BL31 +#define PLATFORM_STACK_SIZE 0x800 +#elif IMAGE_BL32 +#define PLATFORM_STACK_SIZE 0x440 +#endif + +#define FIRMWARE_WELCOME_STR "Booting Trusted Firmware\n" +#if ENABLE_PLAT_COMPAT +#define PLATFORM_MAX_AFFLVL MPIDR_AFFLVL2 +#else +#define PLAT_MAX_PWR_LVL 2 /* MPIDR_AFFLVL2 */ +#endif + +#define PLATFORM_CACHE_LINE_SIZE 64 +#define PLATFORM_SYSTEM_COUNT 1 +#define PLATFORM_CLUSTER_COUNT 2 +#define PLATFORM_CLUSTER0_CORE_COUNT 4 +#define PLATFORM_CLUSTER1_CORE_COUNT 4 +#define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER1_CORE_COUNT + \ + PLATFORM_CLUSTER0_CORE_COUNT) +#define PLATFORM_MAX_CPUS_PER_CLUSTER 4 +#define PLATFORM_NUM_AFFS (PLATFORM_SYSTEM_COUNT + \ + PLATFORM_CLUSTER_COUNT + \ + PLATFORM_CORE_COUNT) + +/******************************************************************************* + * Platform memory map related constants + ******************************************************************************/ +/* ATF Argument */ +#define ATF_ARG_SIZE (0x800) + +/* TF txet, ro, rw, internal SRAM, Size: release: 80KB, debug: 92KB */ +#define TZRAM_BASE (0x110000) +#if DEBUG +#define TZRAM_SIZE (0x1C400) +#else +#define TZRAM_SIZE (0x1C400) +#endif +#define TZRAM2_BASE 0x00100000 +#define TZRAM2_SIZE 0xDC00 +#define TZRAM2_LIMIT (TZRAM2_BASE + TZRAM2_SIZE) + +#define RAM_CONSOLE_BASE 0x0012D000 +#define RAM_CONSOLE_SIZE 0x00001000 +/******************************************************************************* + * BL31 specific defines. + ******************************************************************************/ +/* + * Put BL3-1 at the top of the Trusted SRAM (just below the shared memory, if + * present). BL31_BASE is calculated using the current BL3-1 debug size plus a + * little space for growth. + */ +#define BL31_BASE (TZRAM_BASE + 0x1000) +#define BL31_LIMIT (TZRAM_BASE + TZRAM_SIZE) +#define BSS1_STACK_LIMIT (TZRAM_BASE + TZRAM_SIZE) +#define BL31_TZRAM_SIZE (TZRAM_SIZE - ATF_ARG_SIZE) + +/******************************************************************************* + * Platform specific page table and MMU setup constants + ******************************************************************************/ +#define ADDR_SPACE_SIZE (1ull << 32) +#define MAX_XLAT_TABLES 7 +#define MAX_MMAP_REGIONS 16 + + +/******************************************************************************* + * CCI-400 related constants + ******************************************************************************/ +#define CCI400_BASE 0x10390000 +#define CCI400_SL_IFACE_CLUSTER0 4 +#define CCI400_SL_IFACE_CLUSTER1 3 +#define CCI400_SL_IFACE_INDEX(mpidr) (mpidr & MPIDR_CLUSTER_MASK ? \ + CCI400_SL_IFACE_CLUSTER1 : \ + CCI400_SL_IFACE_CLUSTER0) +#define CCI_SEC_ACCESS_OFFSET (0x8) + + +/******************************************************************************* + * Declarations and constants to access the mailboxes safely. Each mailbox is + * aligned on the biggest cache line size in the platform. This is known only + * to the platform as it might have a combination of integrated and external + * caches. Such alignment ensures that two maiboxes do not sit on the same cache + * line at any cache level. They could belong to different cpus/clusters & + * get written while being protected by different locks causing corruption of + * a valid mailbox address. + ******************************************************************************/ +#define CACHE_WRITEBACK_SHIFT 6 +#define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT) + +#define BL32_BASE (0x0) + +/* + * Load address of BL3-3 for this platform port + */ +#define LK_SIZE_LIMIT (0x100000) +#define PLAT_MTK_NS_IMAGE_OFFSET (0x41E00000) +/* 16KB */ +#define ATF_AEE_BUFFER_SIZE (0x4000) +#define PAGE_SIZE_2MB_MASK (PAGE_SIZE_2MB - 1) +#define IS_PAGE_2MB_ALIGNED(addr) (((addr) & PAGE_SIZE_2MB_MASK) == 0) +#define PAGE_SIZE_2MB (1 << PAGE_SIZE_2MB_SHIFT) +#define PAGE_SIZE_2MB_SHIFT TWO_MB_SHIFT + +#endif /* __PLATFORM_DEF_H__ */ diff --git a/plat/mediatek/mt6795/include/power_tracer.h b/plat/mediatek/mt6795/include/power_tracer.h new file mode 100644 index 0000000..ab9390d --- /dev/null +++ b/plat/mediatek/mt6795/include/power_tracer.h @@ -0,0 +1,43 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __POWER_TRACER_H__ +#define __POWER_TRACER_H__ + +#define CPU_UP 0 +#define CPU_DOWN 1 +#define CPU_SUSPEND 2 +#define CLUSTER_UP 3 +#define CLUSTER_DOWN 4 +#define CLUSTER_SUSPEND 5 + +void trace_power_flow(unsigned long mpidr, unsigned char mode); + +#endif diff --git a/plat/mediatek/mt6795/include/scu.h b/plat/mediatek/mt6795/include/scu.h new file mode 100644 index 0000000..e59fd43 --- /dev/null +++ b/plat/mediatek/mt6795/include/scu.h @@ -0,0 +1,37 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __SCU_H__ +#define __SCU_H__ + +void disable_scu(unsigned long mpidr); +void enable_scu(unsigned long mpidr); + +#endif diff --git a/plat/mediatek/mt6795/include/spm.h b/plat/mediatek/mt6795/include/spm.h new file mode 100644 index 0000000..32f8d8f --- /dev/null +++ b/plat/mediatek/mt6795/include/spm.h @@ -0,0 +1,222 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __SPM_H__ +#define __SPM_H__ + +#define SPM_POWERON_CONFIG_SET (SPM_BASE + 0x000) +#define SPM_POWER_ON_VAL0 (SPM_BASE + 0x010) +#define SPM_POWER_ON_VAL1 (SPM_BASE + 0x014) +#define SPM_CLK_SETTLE (SPM_BASE + 0x100) +#define SPM_CA7_CPU1_PWR_CON (SPM_BASE + 0x218) +#define SPM_CA7_CPU2_PWR_CON (SPM_BASE + 0x21c) +#define SPM_CA7_CPU3_PWR_CON (SPM_BASE + 0x220) +#define SPM_CA7_CPU1_L1_PDN (SPM_BASE + 0x264) +#define SPM_CA7_CPU2_L1_PDN (SPM_BASE + 0x26c) +#define SPM_CA7_CPU3_L1_PDN (SPM_BASE + 0x274) +#define SPM_MD32_SRAM_CON (SPM_BASE + 0x2c8) +#define SPM_PCM_CON0 (SPM_BASE + 0x310) +#define SPM_PCM_CON1 (SPM_BASE + 0x314) +#define SPM_PCM_IM_PTR (SPM_BASE + 0x318) +#define SPM_PCM_IM_LEN (SPM_BASE + 0x31c) +#define SPM_PCM_REG_DATA_INI (SPM_BASE + 0x320) +#define SPM_PCM_EVENT_VECTOR0 (SPM_BASE + 0x340) +#define SPM_PCM_EVENT_VECTOR1 (SPM_BASE + 0x344) +#define SPM_PCM_EVENT_VECTOR2 (SPM_BASE + 0x348) +#define SPM_PCM_EVENT_VECTOR3 (SPM_BASE + 0x34c) +#define SPM_PCM_MAS_PAUSE_MASK (SPM_BASE + 0x354) +#define SPM_PCM_PWR_IO_EN (SPM_BASE + 0x358) +#define SPM_PCM_TIMER_VAL (SPM_BASE + 0x35c) +#define SPM_PCM_TIMER_OUT (SPM_BASE + 0x360) +#define SPM_PCM_REG0_DATA (SPM_BASE + 0x380) +#define SPM_PCM_REG1_DATA (SPM_BASE + 0x384) +#define SPM_PCM_REG2_DATA (SPM_BASE + 0x388) +#define SPM_PCM_REG3_DATA (SPM_BASE + 0x38c) +#define SPM_PCM_REG4_DATA (SPM_BASE + 0x390) +#define SPM_PCM_REG5_DATA (SPM_BASE + 0x394) +#define SPM_PCM_REG6_DATA (SPM_BASE + 0x398) +#define SPM_PCM_REG7_DATA (SPM_BASE + 0x39c) +#define SPM_PCM_REG8_DATA (SPM_BASE + 0x3a0) +#define SPM_PCM_REG9_DATA (SPM_BASE + 0x3a4) +#define SPM_PCM_REG10_DATA (SPM_BASE + 0x3a8) +#define SPM_PCM_REG11_DATA (SPM_BASE + 0x3ac) +#define SPM_PCM_REG12_DATA (SPM_BASE + 0x3b0) +#define SPM_PCM_REG13_DATA (SPM_BASE + 0x3b4) +#define SPM_PCM_REG14_DATA (SPM_BASE + 0x3b8) +#define SPM_PCM_REG15_DATA (SPM_BASE + 0x3bc) +#define SPM_PCM_EVENT_REG_STA (SPM_BASE + 0x3c0) +#define SPM_PCM_FSM_STA (SPM_BASE + 0x3c4) +#define SPM_PCM_IM_HOST_RW_PTR (SPM_BASE + 0x3c8) +#define SPM_PCM_IM_HOST_RW_DAT (SPM_BASE + 0x3cc) +#define SPM_PCM_EVENT_VECTOR4 (SPM_BASE + 0x3d0) +#define SPM_PCM_EVENT_VECTOR5 (SPM_BASE + 0x3d4) +#define SPM_PCM_EVENT_VECTOR6 (SPM_BASE + 0x3d8) +#define SPM_PCM_EVENT_VECTOR7 (SPM_BASE + 0x3dc) +#define SPM_PCM_SW_INT_SET (SPM_BASE + 0x3e0) +#define SPM_PCM_SW_INT_CLEAR (SPM_BASE + 0x3e4) +#define SPM_CLK_CON (SPM_BASE + 0x400) +#define SPM_SLEEP_PTPOD2_CON (SPM_BASE + 0x408) +#define SPM_APMCU_PWRCTL (SPM_BASE + 0x600) +#define SPM_AP_DVFS_CON_SET (SPM_BASE + 0x604) +#define SPM_AP_STANBY_CON (SPM_BASE + 0x608) +#define SPM_PWR_STATUS (SPM_BASE + 0x60c) +#define SPM_PWR_STATUS_2ND (SPM_BASE + 0x610) +#define SPM_AP_BSI_REQ (SPM_BASE + 0x614) +#define SPM_SLEEP_TIMER_STA (SPM_BASE + 0x720) +#define SPM_SLEEP_WAKEUP_EVENT_MASK (SPM_BASE + 0x810) +#define SPM_SLEEP_CPU_WAKEUP_EVENT (SPM_BASE + 0x814) +#define SPM_SLEEP_MD32_WAKEUP_EVENT_MASK (SPM_BASE + 0x818) +#define SPM_PCM_WDT_TIMER_VAL (SPM_BASE + 0x824) +#define SPM_PCM_WDT_TIMER_OUT (SPM_BASE + 0x828) +#define SPM_PCM_MD32_MAILBOX (SPM_BASE + 0x830) +#define SPM_PCM_MD32_IRQ (SPM_BASE + 0x834) +#define SPM_SLEEP_ISR_MASK (SPM_BASE + 0x900) +#define SPM_SLEEP_ISR_STATUS (SPM_BASE + 0x904) +#define SPM_SLEEP_ISR_RAW_STA (SPM_BASE + 0x910) +#define SPM_SLEEP_MD32_ISR_RAW_STA (SPM_BASE + 0x914) +#define SPM_SLEEP_WAKEUP_MISC (SPM_BASE + 0x918) +#define SPM_SLEEP_BUS_PROTECT_RDY (SPM_BASE + 0x91c) +#define SPM_SLEEP_SUBSYS_IDLE_STA (SPM_BASE + 0x920) +#define SPM_PCM_RESERVE (SPM_BASE + 0xb00) +#define SPM_PCM_RESERVE2 (SPM_BASE + 0xb04) +#define SPM_PCM_FLAGS (SPM_BASE + 0xb08) +#define SPM_PCM_SRC_REQ (SPM_BASE + 0xb0c) +#define SPM_PCM_DEBUG_CON (SPM_BASE + 0xb20) +#define SPM_CA7_CPU0_IRQ_MASK (SPM_BASE + 0xb30) +#define SPM_CA7_CPU1_IRQ_MASK (SPM_BASE + 0xb34) +#define SPM_CA7_CPU2_IRQ_MASK (SPM_BASE + 0xb38) +#define SPM_CA7_CPU3_IRQ_MASK (SPM_BASE + 0xb3c) +#define SPM_CA15_CPU0_IRQ_MASK (SPM_BASE + 0xb40) +#define SPM_CA15_CPU1_IRQ_MASK (SPM_BASE + 0xb44) +#define SPM_CA15_CPU2_IRQ_MASK (SPM_BASE + 0xb48) +#define SPM_CA15_CPU3_IRQ_MASK (SPM_BASE + 0xb4c) +#define SPM_PCM_PASR_DPD_0 (SPM_BASE + 0xb60) +#define SPM_PCM_PASR_DPD_1 (SPM_BASE + 0xb64) +#define SPM_PCM_PASR_DPD_2 (SPM_BASE + 0xb68) +#define SPM_PCM_PASR_DPD_3 (SPM_BASE + 0xb6c) +#define SPM_SLEEP_CA7_WFI0_EN (SPM_BASE + 0xf00) +#define SPM_SLEEP_CA7_WFI1_EN (SPM_BASE + 0xf04) +#define SPM_SLEEP_CA7_WFI2_EN (SPM_BASE + 0xf08) +#define SPM_SLEEP_CA7_WFI3_EN (SPM_BASE + 0xf0c) +#define SPM_SLEEP_CA15_WFI0_EN (SPM_BASE + 0xf10) +#define SPM_SLEEP_CA15_WFI1_EN (SPM_BASE + 0xf14) +#define SPM_SLEEP_CA15_WFI2_EN (SPM_BASE + 0xf18) +#define SPM_SLEEP_CA15_WFI3_EN (SPM_BASE + 0xf1c) + +#define SPM_PROJECT_CODE 0xb16 + +#define SPM_REGWR_EN (1U << 0) +#define SPM_REGWR_CFG_KEY (SPM_PROJECT_CODE << 16) + +#define SPM_CPU_PDN_DIS (1U << 0) +#define SPM_INFRA_PDN_DIS (1U << 1) +#define SPM_DDRPHY_PDN_DIS (1U << 2) +#define SPM_DUALVCORE_PDN_DIS (1U << 3) +#define SPM_PASR_DIS (1U << 4) +#define SPM_DPD_DIS (1U << 5) +#define SPM_SODI_DIS (1U << 6) +#define SPM_MEMPLL_RESET (1U << 7) +#define SPM_MAINPLL_PDN_DIS (1U << 8) +#define SPM_CPU_DVS_DIS (1U << 9) +#define SPM_CPU_DORMANT (1U << 10) +#define SPM_EXT_VSEL_GPIO103 (1U << 11) +#define SPM_DDR_HIGH_SPEED (1U << 12) +#define SPM_OPT (1U << 13) + +#define POWER_ON_VAL1_DEF 0x01011820 +#define PCM_FSM_STA_DEF 0x48490 +#define PCM_END_FSM_STA_DEF 0x08490 +#define PCM_END_FSM_STA_MASK 0x3fff0 +#define PCM_HANDSHAKE_SEND1 0xbeefbeef + +#define PCM_WDT_TIMEOUT (30 * 32768) +#define PCM_TIMER_MAX (0xffffffff - PCM_WDT_TIMEOUT) + +#define CON0_PCM_KICK (1U << 0) +#define CON0_IM_KICK (1U << 1) +#define CON0_IM_SLEEP_DVS (1U << 3) +#define CON0_PCM_SW_RESET (1U << 15) +#define CON0_CFG_KEY (SPM_PROJECT_CODE << 16) + +#define CON1_IM_SLAVE (1U << 0) +#define CON1_MIF_APBEN (1U << 3) +#define CON1_PCM_TIMER_EN (1U << 5) +#define CON1_IM_NONRP_EN (1U << 6) +#define CON1_PCM_WDT_EN (1U << 8) +#define CON1_PCM_WDT_WAKE_MODE (1U << 9) +#define CON1_SPM_SRAM_SLP_B (1U << 10) +#define CON1_SPM_SRAM_ISO_B (1U << 11) +#define CON1_EVENT_LOCK_EN (1U << 12) +#define CON1_CFG_KEY (SPM_PROJECT_CODE << 16) + +#define PCM_PWRIO_EN_R0 (1U << 0) +#define PCM_PWRIO_EN_R7 (1U << 7) +#define PCM_RF_SYNC_R0 (1U << 16) +#define PCM_RF_SYNC_R2 (1U << 18) +#define PCM_RF_SYNC_R6 (1U << 22) +#define PCM_RF_SYNC_R7 (1U << 23) + +#define CC_SYSCLK0_EN_0 (1U << 0) +#define CC_SYSCLK0_EN_1 (1U << 1) +#define CC_SYSCLK1_EN_0 (1U << 2) +#define CC_SYSCLK1_EN_1 (1U << 3) +#define CC_SYSSETTLE_SEL (1U << 4) +#define CC_LOCK_INFRA_DCM (1U << 5) +#define CC_SRCLKENA_MASK_0 (1U << 6) +#define CC_CXO32K_RM_EN_MD1 (1U << 9) +#define CC_CXO32K_RM_EN_MD2 (1U << 10) +#define CC_CLKSQ1_SEL (1U << 12) +#define CC_DISABLE_DORM_PWR (1U << 14) +#define CC_MD32_DCM_EN (1U << 18) + +#define WFI_OP_AND 1 +#define WFI_OP_OR 0 + +#define WAKE_MISC_PCM_TIMER (1U << 19) +#define WAKE_MISC_CPU_WAKE (1U << 20) + +/* define WAKE_SRC_XXX */ +#define WAKE_SRC_SPM_MERGE (1 << 0) +#define WAKE_SRC_KP (1 << 2) +#define WAKE_SRC_WDT (1 << 3) +#define WAKE_SRC_GPT (1 << 4) +#define WAKE_SRC_EINT (1 << 6) +#define WAKE_SRC_LOW_BAT (1 << 9) +#define WAKE_SRC_MD32 (1 << 10) +#define WAKE_SRC_USB_CD (1 << 14) +#define WAKE_SRC_USB_PDN (1 << 15) +#define WAKE_SRC_AFE (1 << 20) +#define WAKE_SRC_THERM (1 << 21) +#define WAKE_SRC_SYSPWREQ (1 << 24) +#define WAKE_SRC_SEJ (1 << 27) +#define WAKE_SRC_ALL_MD32 (1 << 28) +#define WAKE_SRC_CPU_IRQ (1 << 29) + +#endif /* __SPM_H__ */ diff --git a/plat/mediatek/mt6795/plat_delay_timer.c b/plat/mediatek/mt6795/plat_delay_timer.c new file mode 100644 index 0000000..797ce05 --- /dev/null +++ b/plat/mediatek/mt6795/plat_delay_timer.c @@ -0,0 +1,54 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include + +static uint32_t plat_get_timer_value(void) +{ + /* + * Generic delay timer implementation expects the timer to be a down + * counter. We apply bitwise NOT operator to the tick values returned + * by read_cntpct_el0() to simulate the down counter. + */ + return (uint32_t)(~read_cntpct_el0()); +} + +static const timer_ops_t plat_timer_ops = { + .get_timer_value = plat_get_timer_value, + .clk_mult = 1, + .clk_div = SYS_COUNTER_FREQ_IN_MHZ, +}; + +void plat_delay_timer_init(void) +{ + timer_init(&plat_timer_ops); +} diff --git a/plat/mediatek/mt6795/plat_mt_gic.c b/plat/mediatek/mt6795/plat_mt_gic.c new file mode 100644 index 0000000..8679d07 --- /dev/null +++ b/plat/mediatek/mt6795/plat_mt_gic.c @@ -0,0 +1,72 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include + +const unsigned int g0_interrupt_array[] = { + PLAT_ARM_G0_IRQS +}; + +gicv2_driver_data_t arm_gic_data = { + .gicd_base = BASE_GICD_BASE, + .gicc_base = BASE_GICC_BASE, + .g0_interrupt_num = ARRAY_SIZE(g0_interrupt_array), + .g0_interrupt_array = g0_interrupt_array, +}; + +void plat_mt_gic_driver_init(void) +{ + gicv2_driver_init(&arm_gic_data); +} + +void plat_mt_gic_init(void) +{ + gicv2_distif_init(); + gicv2_pcpu_distif_init(); + gicv2_cpuif_enable(); +} + +void plat_mt_gic_cpuif_enable(void) +{ + gicv2_cpuif_enable(); +} + +void plat_mt_gic_cpuif_disable(void) +{ + gicv2_cpuif_disable(); +} + +void plat_mt_gic_pcpu_init(void) +{ + gicv2_pcpu_distif_init(); +} diff --git a/plat/mediatek/mt6795/plat_pm.c b/plat/mediatek/mt6795/plat_pm.c new file mode 100644 index 0000000..96fdab0 --- /dev/null +++ b/plat/mediatek/mt6795/plat_pm.c @@ -0,0 +1,495 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct core_context { + unsigned long timer_data[8]; + unsigned int count; + unsigned int rst; + unsigned int abt; + unsigned int brk; +}; + +struct cluster_context { + struct core_context core[PLATFORM_MAX_CPUS_PER_CLUSTER]; +}; + +/* + * Top level structure to hold the complete context of a multi cluster system + */ +struct system_context { + struct cluster_context cluster[PLATFORM_CLUSTER_COUNT]; +}; + +/* + * Top level structure which encapsulates the context of the entire system + */ +static struct system_context dormant_data[1]; + +static inline struct cluster_context *system_cluster( + struct system_context *system, + uint32_t clusterid) +{ + return &system->cluster[clusterid]; +} + +static inline struct core_context *cluster_core(struct cluster_context *cluster, + uint32_t cpuid) +{ + return &cluster->core[cpuid]; +} + +static struct cluster_context *get_cluster_data(unsigned long mpidr) +{ + uint32_t clusterid; + + clusterid = (mpidr & MPIDR_CLUSTER_MASK) >> MPIDR_AFFINITY_BITS; + + return system_cluster(dormant_data, clusterid); +} + +static struct core_context *get_core_data(unsigned long mpidr) +{ + struct cluster_context *cluster; + uint32_t cpuid; + + cluster = get_cluster_data(mpidr); + cpuid = mpidr & MPIDR_CPU_MASK; + + return cluster_core(cluster, cpuid); +} + +static void mt_save_generic_timer(unsigned long *container) +{ + uint64_t ctl; + uint64_t val; + + __asm__ volatile("mrs %x0, cntkctl_el1\n\t" + "mrs %x1, cntp_cval_el0\n\t" + "stp %x0, %x1, [%2, #0]" + : "=&r" (ctl), "=&r" (val) + : "r" (container) + : "memory"); + + __asm__ volatile("mrs %x0, cntp_tval_el0\n\t" + "mrs %x1, cntp_ctl_el0\n\t" + "stp %x0, %x1, [%2, #16]" + : "=&r" (val), "=&r" (ctl) + : "r" (container) + : "memory"); + + __asm__ volatile("mrs %x0, cntv_tval_el0\n\t" + "mrs %x1, cntv_ctl_el0\n\t" + "stp %x0, %x1, [%2, #32]" + : "=&r" (val), "=&r" (ctl) + : "r" (container) + : "memory"); +} + +static void mt_restore_generic_timer(unsigned long *container) +{ + uint64_t ctl; + uint64_t val; + + __asm__ volatile("ldp %x0, %x1, [%2, #0]\n\t" + "msr cntkctl_el1, %x0\n\t" + "msr cntp_cval_el0, %x1" + : "=&r" (ctl), "=&r" (val) + : "r" (container) + : "memory"); + + __asm__ volatile("ldp %x0, %x1, [%2, #16]\n\t" + "msr cntp_tval_el0, %x0\n\t" + "msr cntp_ctl_el0, %x1" + : "=&r" (val), "=&r" (ctl) + : "r" (container) + : "memory"); + + __asm__ volatile("ldp %x0, %x1, [%2, #32]\n\t" + "msr cntv_tval_el0, %x0\n\t" + "msr cntv_ctl_el0, %x1" + : "=&r" (val), "=&r" (ctl) + : "r" (container) + : "memory"); +} + +static void stop_generic_timer(void) +{ + /* + * Disable the timer and mask the irq to prevent + * suprious interrupts on this cpu interface. It + * will bite us when we come back if we don't. It + * will be replayed on the inbound cluster. + */ + uint64_t cntpctl = read_cntp_ctl_el0(); + + write_cntp_ctl_el0(clr_cntp_ctl_enable(cntpctl)); +} + +static void mt_cpu_save(unsigned long mpidr) +{ + struct core_context *core; + + core = get_core_data(mpidr); + mt_save_generic_timer(core->timer_data); + + /* disable timer irq, and upper layer should enable it again. */ + stop_generic_timer(); +} + +static void mt_cpu_restore(unsigned long mpidr) +{ + struct core_context *core; + + core = get_core_data(mpidr); + mt_restore_generic_timer(core->timer_data); +} + +static void mt_platform_save_context(unsigned long mpidr) +{ + /* mcusys_save_context: */ + mt_cpu_save(mpidr); +} + +static void mt_platform_restore_context(unsigned long mpidr) +{ + /* mcusys_restore_context: */ + mt_cpu_restore(mpidr); +} + +/******************************************************************************* +* Private function which is used to determine if any platform actions +* should be performed for the specified affinity instance given its +* state. Nothing needs to be done if the 'state' is not off or if this is not +* the highest affinity level which will enter the 'state'. +*******************************************************************************/ +static int32_t plat_do_plat_actions(unsigned int afflvl, unsigned int state) +{ + unsigned int max_phys_off_afflvl; + + assert(afflvl <= MPIDR_AFFLVL2); + + if (state != PSCI_STATE_OFF) + return -EAGAIN; + + /* + * Find the highest affinity level which will be suspended and postpone + * all the platform specific actions until that level is hit. + */ + max_phys_off_afflvl = psci_get_max_phys_off_afflvl(); + assert(max_phys_off_afflvl != PSCI_INVALID_DATA); + if (afflvl != max_phys_off_afflvl) + return -EAGAIN; + + return 0; +} + +/******************************************************************************* + * MTK_platform handler called when an affinity instance is about to enter + * standby. + ******************************************************************************/ +static void plat_affinst_standby(unsigned int power_state) +{ + unsigned int target_afflvl; + + /* Sanity check the requested state */ + target_afflvl = psci_get_pstate_afflvl(power_state); + + /* + * It's possible to enter standby only on affinity level 0 i.e. a cpu + * on the MTK_platform. Ignore any other affinity level. + */ + if (target_afflvl == MPIDR_AFFLVL0) { + /* + * Enter standby state. dsb is good practice before using wfi + * to enter low power states. + */ + dsb(); + wfi(); + } +} + +/******************************************************************************* + * MTK_platform handler called when an affinity instance is about to be turned + * on. The level and mpidr determine the affinity instance. + ******************************************************************************/ +static int plat_affinst_on(unsigned long mpidr, + unsigned long sec_entrypoint, + unsigned int afflvl, + unsigned int state) +{ + int rc = PSCI_E_SUCCESS; + unsigned long cpu_id; + unsigned long cluster_id; + uintptr_t rv; + + /* + * It's possible to turn on only affinity level 0 i.e. a cpu + * on the MTK_platform. Ignore any other affinity level. + */ + if (afflvl != MPIDR_AFFLVL0) + return rc; + + cpu_id = mpidr & MPIDR_CPU_MASK; + cluster_id = mpidr & MPIDR_CLUSTER_MASK; + + if (cluster_id) + rv = (uintptr_t)&mt6795_mcucfg->mp1_rv_addr[cpu_id].rv_addr_lw; + else + rv = (uintptr_t)&mt6795_mcucfg->mp0_rv_addr[cpu_id].rv_addr_lw; + + mmio_write_32(rv, sec_entrypoint); + INFO("mt_on[%ld:%ld], entry %x\n", + cluster_id, cpu_id, mmio_read_32(rv)); + + return rc; +} + +/******************************************************************************* + * MTK_platform handler called when an affinity instance is about to be turned + * off. The level and mpidr determine the affinity instance. The 'state' arg. + * allows the platform to decide whether the cluster is being turned off and + * take apt actions. + * + * CAUTION: This function is called with coherent stacks so that caches can be + * turned off, flushed and coherency disabled. There is no guarantee that caches + * will remain turned on across calls to this function as each affinity level is + * dealt with. So do not write & read global variables across calls. It will be + * wise to do flush a write to the global to prevent unpredictable results. + ******************************************************************************/ +static void plat_affinst_off(unsigned int afflvl, unsigned int state) +{ + unsigned long mpidr = read_mpidr_el1(); + + /* Determine if any platform actions need to be executed. */ + if (plat_do_plat_actions(afflvl, state) == -EAGAIN) + return; + + /* Prevent interrupts from spuriously waking up this cpu */ + plat_mt_gic_cpuif_disable(); + + trace_power_flow(mpidr, CPU_DOWN); + + if (afflvl != MPIDR_AFFLVL0) { + /* Disable coherency if this cluster is to be turned off */ + plat_cci_disable(); + + trace_power_flow(mpidr, CLUSTER_DOWN); + } +} + +/******************************************************************************* + * MTK_platform handler called when an affinity instance is about to be + * suspended. The level and mpidr determine the affinity instance. The 'state' + * arg. allows the platform to decide whether the cluster is being turned off + * and take apt actions. + * + * CAUTION: This function is called with coherent stacks so that caches can be + * turned off, flushed and coherency disabled. There is no guarantee that caches + * will remain turned on across calls to this function as each affinity level is + * dealt with. So do not write & read global variables across calls. It will be + * wise to do flush a write to the global to prevent unpredictable results. + ******************************************************************************/ +static void plat_affinst_suspend(unsigned long sec_entrypoint, + unsigned int afflvl, + unsigned int state) +{ + unsigned long mpidr = read_mpidr_el1(); + unsigned long cluster_id; + unsigned long cpu_id; + uintptr_t rv; + + /* Determine if any platform actions need to be executed. */ + if (plat_do_plat_actions(afflvl, state) == -EAGAIN) + return; + + cpu_id = mpidr & MPIDR_CPU_MASK; + cluster_id = mpidr & MPIDR_CLUSTER_MASK; + + if (cluster_id) + rv = (uintptr_t)&mt6795_mcucfg->mp1_rv_addr[cpu_id].rv_addr_lw; + else + rv = (uintptr_t)&mt6795_mcucfg->mp0_rv_addr[cpu_id].rv_addr_lw; + + mmio_write_32(rv, sec_entrypoint); + + if (afflvl >= MPIDR_AFFLVL0) + mt_platform_save_context(mpidr); + + /* Perform the common cluster specific operations */ + if (afflvl >= MPIDR_AFFLVL1) { + /* Disable coherency if this cluster is to be turned off */ + plat_cci_disable(); + disable_scu(mpidr); + + trace_power_flow(mpidr, CLUSTER_SUSPEND); + } + + if (afflvl >= MPIDR_AFFLVL2) { + /* Prevent interrupts from spuriously waking up this cpu */ + plat_mt_gic_cpuif_disable(); + } +} + +/******************************************************************************* + * MTK_platform handler called when an affinity instance has just been powered + * on after being turned off earlier. The level and mpidr determine the affinity + * instance. The 'state' arg. allows the platform to decide whether the cluster + * was turned off prior to wakeup and do what's necessary to setup it up + * correctly. + ******************************************************************************/ +static void plat_affinst_on_finish(unsigned int afflvl, unsigned int state) +{ + unsigned long mpidr = read_mpidr_el1(); + + /* Determine if any platform actions need to be executed. */ + if (plat_do_plat_actions(afflvl, state) == -EAGAIN) + return; + + /* Perform the common cluster specific operations */ + if (afflvl >= MPIDR_AFFLVL1) { + enable_scu(mpidr); + + /* Enable coherency if this cluster was off */ + plat_cci_enable(); + trace_power_flow(mpidr, CLUSTER_UP); + } + + /* Enable the gic cpu interface */ + plat_mt_gic_cpuif_enable(); + plat_mt_gic_pcpu_init(); + trace_power_flow(mpidr, CPU_UP); +} + +/******************************************************************************* + * MTK_platform handler called when an affinity instance has just been powered + * on after having been suspended earlier. The level and mpidr determine the + * affinity instance. + ******************************************************************************/ +static void plat_affinst_suspend_finish(unsigned int afflvl, unsigned int state) +{ + unsigned long mpidr = read_mpidr_el1(); + + /* Determine if any platform actions need to be executed. */ + if (plat_do_plat_actions(afflvl, state) == -EAGAIN) + return; + + if (afflvl >= MPIDR_AFFLVL2) { + /* Enable the gic cpu interface */ + plat_mt_gic_init(); + plat_mt_gic_cpuif_enable(); + } + + /* Perform the common cluster specific operations */ + if (afflvl >= MPIDR_AFFLVL1) { + enable_scu(mpidr); + + /* Enable coherency if this cluster was off */ + plat_cci_enable(); + trace_power_flow(mpidr, CLUSTER_UP); + } + + if (afflvl >= MPIDR_AFFLVL0) + mt_platform_restore_context(mpidr); + + plat_mt_gic_pcpu_init(); +} + +static unsigned int plat_get_sys_suspend_power_state(void) +{ + /* StateID: 0, StateType: 1(power down), PowerLevel: 2(system) */ + return psci_make_powerstate(0, 1, 2); +} + +/******************************************************************************* + * MTK handlers to shutdown/reboot the system + ******************************************************************************/ +static void __dead2 plat_system_off(void) +{ + INFO("MTK System Off\n"); + wfi(); + ERROR("MTK System Off: operation not handled.\n"); + panic(); +} + +static void __dead2 plat_system_reset(void) +{ + /* Write the System Configuration Control Register */ + INFO("MTK System Reset\n"); + + mmio_clrbits_32(MTK_WDT_BASE, + (MTK_WDT_MODE_DUAL_MODE | MTK_WDT_MODE_IRQ)); + mmio_setbits_32(MTK_WDT_BASE, (MTK_WDT_MODE_KEY | MTK_WDT_MODE_EXTEN)); + mmio_setbits_32(MTK_WDT_SWRST, MTK_WDT_SWRST_KEY); + + wfi(); + ERROR("MTK System Reset: operation not handled.\n"); + panic(); +} + +/******************************************************************************* + * Export the platform handlers to enable psci to invoke them + ******************************************************************************/ +static const plat_pm_ops_t plat_plat_pm_ops = { + .affinst_standby = plat_affinst_standby, + .affinst_on = plat_affinst_on, + .affinst_off = plat_affinst_off, + .affinst_suspend = plat_affinst_suspend, + .affinst_on_finish = plat_affinst_on_finish, + .affinst_suspend_finish = plat_affinst_suspend_finish, + .system_off = plat_system_off, + .system_reset = plat_system_reset, + .get_sys_suspend_power_state = plat_get_sys_suspend_power_state, +}; + +/******************************************************************************* + * Export the platform specific power ops & initialize the mtk_platform power + * controller + ******************************************************************************/ +int platform_setup_pm(const plat_pm_ops_t **plat_ops) +{ + *plat_ops = &plat_plat_pm_ops; + return 0; +} diff --git a/plat/mediatek/mt6795/plat_sip_svc.c b/plat/mediatek/mt6795/plat_sip_svc.c new file mode 100644 index 0000000..9bb0f34 --- /dev/null +++ b/plat/mediatek/mt6795/plat_sip_svc.c @@ -0,0 +1,89 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/******************************************************************************* + * SIP top level handler for servicing SMCs. + ******************************************************************************/ +uint64_t mediatek_plat_sip_handler(uint32_t smc_fid, + uint64_t x1, + uint64_t x2, + uint64_t x3, + uint64_t x4, + void *cookie, + void *handle, + uint64_t flags) +{ + uint64_t rc = 0; + uint32_t ns; + + /* Determine which security state this SMC originated from */ + ns = is_caller_non_secure(flags); + + VERBOSE("sip_smc_handler\n"); + VERBOSE("id=0x%x\n", smc_fid); + VERBOSE("x1=0x%lx, x2=0x%lx, x3=0x%lx, x4=0x%lx\n", x1, x2, x3, x4); + + if (!ns) { + /* SiP SMC service secure world's call */ + switch (smc_fid) { + default: + rc = SMC_UNK; + } + } else { + /* SiP SMC service normal world's call */ + switch (smc_fid) { + default: + rc = SMC_UNK; + } + } + + if (rc == SMC_UNK) { + console_init(gteearg.atf_log_port, + UART_CLOCK, UART_BAUDRATE); + ERROR("%s: unhandled NS(%d) SMC (0x%x)\n", + __func__, ns, smc_fid); + console_uninit(); + } + SMC_RET1(handle, rc); +} diff --git a/plat/mediatek/mt6795/plat_topology.c b/plat/mediatek/mt6795/plat_topology.c new file mode 100644 index 0000000..b1feac0 --- /dev/null +++ b/plat/mediatek/mt6795/plat_topology.c @@ -0,0 +1,57 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include + +unsigned int plat_get_aff_count(unsigned int aff_lvl, unsigned long mpidr) +{ + /* Report 1 (absent) instance at levels higher that the cluster level */ + if (aff_lvl > MPIDR_AFFLVL1) + return PLATFORM_SYSTEM_COUNT; + + if (aff_lvl == MPIDR_AFFLVL1) + return PLATFORM_CLUSTER_COUNT; + + return mpidr & 0x100 ? PLATFORM_CLUSTER1_CORE_COUNT : + PLATFORM_CLUSTER0_CORE_COUNT; +} + +unsigned int plat_get_aff_state(unsigned int aff_lvl, unsigned long mpidr) +{ + return aff_lvl <= MPIDR_AFFLVL2 ? PSCI_AFF_PRESENT : PSCI_AFF_ABSENT; +} + +int mt_setup_topology(void) +{ + /* [TODO] Make topology configurable via SCC */ + return 0; +} diff --git a/plat/mediatek/mt6795/platform.mk b/plat/mediatek/mt6795/platform.mk new file mode 100644 index 0000000..97f2e1c --- /dev/null +++ b/plat/mediatek/mt6795/platform.mk @@ -0,0 +1,95 @@ +# +# Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# +# Redistributions of source code must retain the above copyright notice, this +# list of conditions and the following disclaimer. +# +# Redistributions in binary form must reproduce the above copyright notice, +# this list of conditions and the following disclaimer in the documentation +# and/or other materials provided with the distribution. +# +# Neither the name of ARM nor the names of its contributors may be used +# to endorse or promote products derived from this software without specific +# prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE +# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +MTK_PLAT := plat/mediatek +MTK_PLAT_SOC := ${MTK_PLAT}/${PLAT} + +# Add OEM customized codes +OEMS := true +MTK_SIP_KERNEL_BOOT_ENABLE := 1 + + +ifneq (${OEMS},none) + OEMS_INCLUDES := -I${MTK_PLAT}/common/custom/ + OEMS_SOURCES := ${MTK_PLAT}/common/custom/oem_svc.c +endif + +PLAT_INCLUDES := -I${MTK_PLAT}/common/ \ + -I${MTK_PLAT}/common/drivers/uart \ + -I${MTK_PLAT_SOC}/ \ + -I${MTK_PLAT_SOC}/drivers/timer/ \ + -I${MTK_PLAT_SOC}/include/ \ + -Iinclude/plat/arm/common/ \ + -Iinclude/common/tbbr/ \ + ${OEMS_INCLUDES} + +PLAT_BL_COMMON_SOURCES := lib/aarch64/xlat_tables.c \ + plat/common/aarch64/plat_common.c \ + plat/common/plat_gic.c + +BL31_SOURCES += drivers/arm/cci/cci.c \ + drivers/delay_timer/generic_delay_timer.c \ + drivers/arm/gic/common/gic_common.c \ + drivers/arm/gic/v2/gicv2_main.c \ + drivers/arm/gic/v2/gicv2_helpers.c \ + plat/common/plat_gicv2.c \ + drivers/console/console.S \ + drivers/delay_timer/delay_timer.c \ + lib/cpus/aarch64/cortex_a53.S \ + plat/common/aarch64/platform_mp_stack.S \ + ${MTK_PLAT_SOC}/bl31_plat_setup.c \ + ${MTK_PLAT_SOC}/plat_mt_gic.c \ + ${MTK_PLAT}/common/mtk_sip_svc.c \ + ${MTK_PLAT}/common/mtk_plat_common.c \ + ${MTK_PLAT}/common/drivers/uart/8250_console.S \ + ${MTK_PLAT_SOC}/aarch64/plat_helpers.S \ + ${MTK_PLAT_SOC}/drivers/timer/mt_cpuxgpt.c \ + ${MTK_PLAT_SOC}/plat_sip_svc.c \ + ${MTK_PLAT_SOC}/plat_delay_timer.c \ + ${MTK_PLAT_SOC}/plat_pm.c \ + ${MTK_PLAT_SOC}/plat_topology.c \ + ${MTK_PLAT_SOC}/power_tracer.c \ + ${MTK_PLAT_SOC}/scu.c \ + ${OEMS_SOURCES} + +# Flag used by the MTK_platform port to determine the version of ARM GIC +# architecture to use for interrupt management in EL3. +ARM_GIC_ARCH := 2 +$(eval $(call add_define,ARM_GIC_ARCH)) + +# Enable workarounds for selected Cortex-A53 erratas. +ERRATA_A53_826319 := 1 +ERRATA_A53_836870 := 1 + +# indicate the reset vector address can be programmed +PROGRAMMABLE_RESET_ADDRESS := 1 + +$(eval $(call add_define,MTK_SIP_KERNEL_BOOT_ENABLE)) + diff --git a/plat/mediatek/mt6795/power_tracer.c b/plat/mediatek/mt6795/power_tracer.c new file mode 100644 index 0000000..e6ea434 --- /dev/null +++ b/plat/mediatek/mt6795/power_tracer.c @@ -0,0 +1,71 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include + +#define trace_log(...) INFO("psci: " __VA_ARGS__) + +void trace_power_flow(unsigned long mpidr, unsigned char mode) +{ + switch (mode) { + case CPU_UP: + trace_log("core %ld:%ld ON\n", + (mpidr & MPIDR_CLUSTER_MASK) >> MPIDR_AFFINITY_BITS, + (mpidr & MPIDR_CPU_MASK)); + break; + case CPU_DOWN: + trace_log("core %ld:%ld OFF\n", + (mpidr & MPIDR_CLUSTER_MASK) >> MPIDR_AFFINITY_BITS, + (mpidr & MPIDR_CPU_MASK)); + break; + case CPU_SUSPEND: + trace_log("core %ld:%ld SUSPEND\n", + (mpidr & MPIDR_CLUSTER_MASK) >> MPIDR_AFFINITY_BITS, + (mpidr & MPIDR_CPU_MASK)); + break; + case CLUSTER_UP: + trace_log("cluster %ld ON\n", + (mpidr & MPIDR_CLUSTER_MASK) >> MPIDR_AFFINITY_BITS); + break; + case CLUSTER_DOWN: + trace_log("cluster %ld OFF\n", + (mpidr & MPIDR_CLUSTER_MASK) >> MPIDR_AFFINITY_BITS); + break; + case CLUSTER_SUSPEND: + trace_log("cluster %ld SUSPEND\n", + (mpidr & MPIDR_CLUSTER_MASK) >> MPIDR_AFFINITY_BITS); + break; + default: + trace_log("unknown power mode\n"); + break; + } +} diff --git a/plat/mediatek/mt6795/scu.c b/plat/mediatek/mt6795/scu.c new file mode 100644 index 0000000..1f4ae6e --- /dev/null +++ b/plat/mediatek/mt6795/scu.c @@ -0,0 +1,53 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include + +void disable_scu(unsigned long mpidr) +{ + if (mpidr & MPIDR_CLUSTER_MASK) + mmio_setbits_32((uintptr_t)&mt6795_mcucfg->mp1_miscdbg, + MP1_ACINACTM); + else + mmio_setbits_32((uintptr_t)&mt6795_mcucfg->mp0_axi_config, + MP0_ACINACTM); +} + +void enable_scu(unsigned long mpidr) +{ + if (mpidr & MPIDR_CLUSTER_MASK) + mmio_clrbits_32((uintptr_t)&mt6795_mcucfg->mp1_miscdbg, + MP1_ACINACTM); + else + mmio_clrbits_32((uintptr_t)&mt6795_mcucfg->mp0_axi_config, + MP0_ACINACTM); +} diff --git a/plat/mediatek/mt8173/drivers/uart/8250_console.S b/plat/mediatek/mt8173/drivers/uart/8250_console.S deleted file mode 100644 index 5b0ae6d..0000000 --- a/plat/mediatek/mt8173/drivers/uart/8250_console.S +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * Neither the name of ARM nor the names of its contributors may be used - * to endorse or promote products derived from this software without specific - * prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ -#include -#include - - .globl console_core_init - .globl console_core_putc - .globl console_core_getc - - /* ----------------------------------------------- - * int console_core_init(unsigned long base_addr, - * unsigned int uart_clk, unsigned int baud_rate) - * Function to initialize the console without a - * C Runtime to print debug information. This - * function will be accessed by console_init and - * crash reporting. - * In: x0 - console base address - * w1 - Uart clock in Hz - * w2 - Baud rate - * Out: return 1 on success else 0 on error - * Clobber list : x1, x2, x3 - * ----------------------------------------------- - */ -func console_core_init - /* Check the input base address */ - cbz x0, core_init_fail - /* Check baud rate and uart clock for sanity */ - cbz w1, core_init_fail - cbz w2, core_init_fail - - /* Disable interrupt */ - str wzr, [x0, #UART_IER] - - /* Force DTR and RTS to high */ - mov w3, #(UART_MCR_DTR | UART_MCR_RTS) - str w3, [x0, #UART_MCR] - - /* Check high speed */ - movz w3, #:abs_g1:115200 - movk w3, #:abs_g0_nc:115200 - cmp w2, w3 - b.hi 1f - - /* Non high speed */ - lsl w2, w2, #4 - mov w3, wzr - b 2f - - /* High speed */ -1: lsl w2, w2, #2 - mov w3, #2 - - /* Set high speed UART register */ -2: str w3, [x0, #UART_HIGHSPEED] - - /* Calculate divisor */ - udiv w3, w1, w2 /* divisor = uartclk / (quot * baudrate) */ - msub w1, w3, w2, w1 /* remainder = uartclk % (quot * baudrate) */ - lsr w2, w2, #1 - cmp w1, w2 - cinc w3, w3, hs - - /* Set line configuration, access divisor latches */ - mov w1, #(UART_LCR_DLAB | UART_LCR_WLS_8) - str w1, [x0, #UART_LCR] - - /* Set the divisor */ - and w1, w3, #0xff - str w1, [x0, #UART_DLL] - lsr w1, w3, #8 - and w1, w1, #0xff - str w1, [x0, #UART_DLH] - - /* Hide the divisor latches */ - mov w1, #UART_LCR_WLS_8 - str w1, [x0, #UART_LCR] - - /* Enable FIFOs, and clear receive and transmit */ - mov w1, #(UART_FCR_FIFO_EN | UART_FCR_CLEAR_RCVR | \ - UART_FCR_CLEAR_XMIT) - str w1, [x0, #UART_FCR] - - mov w0, #1 - ret -core_init_fail: - mov w0, wzr - ret -endfunc console_core_init - - /* -------------------------------------------------------- - * int console_core_putc(int c, unsigned long base_addr) - * Function to output a character over the console. It - * returns the character printed on success or -1 on error. - * In : w0 - character to be printed - * x1 - console base address - * Out : return -1 on error else return character. - * Clobber list : x2 - * -------------------------------------------------------- - */ -func console_core_putc - /* Check the input parameter */ - cbz x1, putc_error - /* Prepend '\r' to '\n' */ - cmp w0, #0xA - b.ne 2f - - /* Check if the transmit FIFO is full */ -1: ldr w2, [x1, #UART_LSR] - and w2, w2, #UART_LSR_THRE - cbz w2, 1b - mov w2, #0xD - str w2, [x1, #UART_THR] - - /* Check if the transmit FIFO is full */ -2: ldr w2, [x1, #UART_LSR] - and w2, w2, #UART_LSR_THRE - cbz w2, 2b - str w0, [x1, #UART_THR] - ret -putc_error: - mov w0, #-1 - ret -endfunc console_core_putc - - /* --------------------------------------------- - * int console_core_getc(unsigned long base_addr) - * Function to get a character from the console. - * It returns the character grabbed on success - * or -1 on error. - * In : x0 - console base address - * Clobber list : x0, x1 - * --------------------------------------------- - */ -func console_core_getc - cbz x0, getc_error - - /* Check if the receive FIFO is empty */ -1: ldr w1, [x0, #UART_LSR] - tbz w1, #UART_LSR_DR, 1b - ldr w0, [x0, #UART_RBR] - ret -getc_error: - mov w0, #-1 - ret -endfunc console_core_getc diff --git a/plat/mediatek/mt8173/drivers/uart/uart8250.h b/plat/mediatek/mt8173/drivers/uart/uart8250.h deleted file mode 100644 index b0f5b8d..0000000 --- a/plat/mediatek/mt8173/drivers/uart/uart8250.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * Neither the name of ARM nor the names of its contributors may be used - * to endorse or promote products derived from this software without specific - * prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ -#ifndef __UART8250_H__ -#define __UART8250_H__ - -/* UART register */ -#define UART_RBR 0x00 /* Receive buffer register */ -#define UART_DLL 0x00 /* Divisor latch lsb */ -#define UART_THR 0x00 /* Transmit holding register */ -#define UART_DLH 0x04 /* Divisor latch msb */ -#define UART_IER 0x04 /* Interrupt enable register */ -#define UART_FCR 0x08 /* FIFO control register */ -#define UART_LCR 0x0c /* Line control register */ -#define UART_MCR 0x10 /* Modem control register */ -#define UART_LSR 0x14 /* Line status register */ -#define UART_HIGHSPEED 0x24 /* High speed UART */ - -/* FCR */ -#define UART_FCR_FIFO_EN 0x01 /* enable FIFO */ -#define UART_FCR_CLEAR_RCVR 0x02 /* clear the RCVR FIFO */ -#define UART_FCR_CLEAR_XMIT 0x04 /* clear the XMIT FIFO */ - -/* LCR */ -#define UART_LCR_WLS_8 0x03 /* 8 bit character length */ -#define UART_LCR_DLAB 0x80 /* divisor latch access bit */ - -/* MCR */ -#define UART_MCR_DTR 0x01 -#define UART_MCR_RTS 0x02 - -/* LSR */ -#define UART_LSR_DR 0x01 /* Data ready */ -#define UART_LSR_THRE 0x20 /* Xmit holding register empty */ - -#endif /* __UART8250_H__ */ diff --git a/plat/mediatek/mt8173/platform.mk b/plat/mediatek/mt8173/platform.mk index c815110..54ca475 100644 --- a/plat/mediatek/mt8173/platform.mk +++ b/plat/mediatek/mt8173/platform.mk @@ -32,13 +32,13 @@ MTK_PLAT_SOC := ${MTK_PLAT}/${PLAT} PLAT_INCLUDES := -I${MTK_PLAT}/common/ \ + -I${MTK_PLAT}/common/drivers/uart/ \ -I${MTK_PLAT_SOC}/drivers/crypt/ \ -I${MTK_PLAT_SOC}/drivers/mtcmos/ \ -I${MTK_PLAT_SOC}/drivers/pmic/ \ -I${MTK_PLAT_SOC}/drivers/rtc/ \ -I${MTK_PLAT_SOC}/drivers/spm/ \ -I${MTK_PLAT_SOC}/drivers/timer/ \ - -I${MTK_PLAT_SOC}/drivers/uart/ \ -I${MTK_PLAT_SOC}/include/ PLAT_BL_COMMON_SOURCES := lib/xlat_tables/xlat_tables_common.c \ @@ -58,6 +58,7 @@ lib/cpus/aarch64/cortex_a57.S \ lib/cpus/aarch64/cortex_a72.S \ plat/common/aarch64/platform_mp_stack.S \ + ${MTK_PLAT}/common/drivers/uart/8250_console.S \ ${MTK_PLAT}/common/mtk_plat_common.c \ ${MTK_PLAT}/common/mtk_sip_svc.c \ ${MTK_PLAT_SOC}/aarch64/plat_helpers.S \ @@ -72,7 +73,6 @@ ${MTK_PLAT_SOC}/drivers/spm/spm_mcdi.c \ ${MTK_PLAT_SOC}/drivers/spm/spm_suspend.c \ ${MTK_PLAT_SOC}/drivers/timer/mt_cpuxgpt.c \ - ${MTK_PLAT_SOC}/drivers/uart/8250_console.S \ ${MTK_PLAT_SOC}/plat_mt_gic.c \ ${MTK_PLAT_SOC}/plat_pm.c \ ${MTK_PLAT_SOC}/plat_sip_calls.c \