Merge branch 'for-next/misc'

Merge branch 'for-next/mips'

Merge branch 'for-next/kvx'

Merge branch 'for-next/kbuild'

Merge branch 'for-next/imx'

Merge branch 'for-next/fastboot'

Merge branch 'for-next/elf'

Merge branch 'for-next/dts-phandles'

Merge branch 'for-next/dts'

Merge branch 'for-next/at91'

Release v2020.07.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: dts: sama5d27-som1: adapt to upstream partition layout ...

Linux v5.8-rc1 adds partitions to the flash@0 node, which now overlap
with the partitions we define and resulting in errors:

  ERROR: m25p0.barebox: New partition m25p0.barebox conflicts
	with m25p0.at91bootstrap
  ERROR: m25p0.barebox-environment: New partition
  	m25p0.barebox-environment conflicts with m25p0.bootloader

We don't want to reuse those partitions as their name may and probably
will change (they have leading zeroes in the unit address).
We could use the &{/path/to/partition} syntax, but that might be broken
soon as well, as the nodes aren't inside a partitions node with a
"fixed-partitions" compatible.
The busses also don't align with the yaml schema and might be renamed.

Nuke the full flash@0 node and supply ours and avoid these problems.
The offsets of the partitions have been adjusted to coincide with the
upstream offsets for second stage bootloader and environment.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: sama5d27-giantboard: add default environment/bbu ...

The board only has SD-Card as storage. Add a barebox update handler to
flash barebox to it, as well as an nv.boot.default=mmc1 to boot from it.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: sama5d27-giantboard: add additional first stage entry point ...

The BootROM constrains us to a 64K big first stage bootloader. Add a PBL
entry point for a xload barebox that sets up the minimum necessary to
load a FAT32 barebox.bin from the SD-Card.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: sama5d27-som1-ek: add barebox_update and multi environment support ...

We now have second stage support for running from sdmmc0 and sdmmc1.
Add a barebox environment and update handler for the two SD cards.

As fall back, we use the environment in the QSPI flash as before as this
is soldered to the SoM and is always available.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: sama5d2: populate $bootsource and $bootsource_instance ...

The BootROM passes us information about the boot medium in r4 and we
already use that in first stage and pass it along to second stage
PBL already. To make use of it, we need to pass it to barebox proper, do
this by writing it in the last 4 bytes of the SRAM. As second stage
always run in DRAM, this is safe to do.

We could also write to SRAM directly from first stage, but at91bootstrap
passes info in r4 as well for the sama5d3 boards, so we do it likewise
to maintain compatibility.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: sama5d2: read back memory size from DDRAM controller ...

We hard code memory size at three places:
 - In the configuration we use to initialize the DDRAM controller
 - In the minimal available size passed from PBL to barebox proper
 - In the device tree memory node override

Remove the two latter ones and replace them with code that reads the
size back from controller.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arch/arm/lib64: Convert to SPDX-License and -Copyright specifiers ...

Converts the files that licensecheck can determine the license for. Also
convert to obvious right Copyright statements. Additionally some minor
code reformatting is done.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: Convert files covered by ARM copyright to SPDX ...

According to Marc Zyngier, former employee at ARM, the company owns the
copyright for code created by its employees. Convert accordingly to SPDX
with the usual rearrangements. Also dropped Marc's email address which
doesn't work any more.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arch/arm/include: Convert to SPDX-License and -Copyright specifiers ...

Converts the files that licensecheck can determine the license for. Also
convert to obvious right Copyright statements. Additionally some minor
code reformatting is done.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: reinstate cooked terminal mode on sanitizer-induced death ...

If we exit due to AddressSanitizer error, we remain in raw mode, which
is not best user experience. Currently every exit is an AddressSanitizer
death due to leaks. We want to encourage users to always have ASan
enabled, to catch more errors, thus call cookmode() on exit.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: add libc memory allocator ...

While we typically want to reuse as much barebox functionality as
possible in sandbox, using system malloc(3) instead can be very
useful when using external memory integrity tools. This is even
useful for AddressSanitizer, because the reports resulting from
the memory poisoning API are less detailed than the built-in
support for the libc malloc(3).

Note that a barebox "heap" is still allocated upfront. It's only
used for request_sdram_region now though. Whatever is allocated by
means of malloc and memalign will be ina disjunct heap.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: os: common: fix compiler warning in add_image() ...

GCC reports:

  ./arch/sandbox/os/common.c: In function ‘add_image’:
  ./arch/sandbox/os/common.c:271:6: warning: cast to pointer from integer of
  	different size [-Wint-to-pointer-cast]

This is because hf->base is an unsigned long long, with the upper 32 bit
all-zeroes on 32-bit systems. The compiler doesn't see that though.

Change the cast, so we no longer warn.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: include: <asm/types.h>: don't define INTERNAL_SIZE_T ...

The INTERNAL_SIZE_T default is size_t, which already is 64-bit on 64-bit
platforms and 32-bit on 32-bit ones. We can thus drop the #define and go
back to the minimal <asm/types.h>.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: dhrystone: remove unneeded and out-of-place <stdbool.h> ...

Our bool definitions come out of <linux/types.h>. <stdbool.h> shouldn't
be used for normal barebox code. We already include <linux/types.h> by
means of <common.h> above. So drop the <stdbool.h>

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

lib: list_sort: delete dead code ...

list_sort.c's core code should only change on sync with Linux, so we
don't really need separate testing code. The code doesn't compile as
we neither have a CONFIG_TEST_LIST_SORT symbol nor do we have a
<linux/random.h> header. Remove it.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

include: delete unreferenced u-boot part.h header ...

It's unused, the functions that it declares aren't defined in barebox
and the <ide.h> header it references doesn't exist.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ppc: mpc5xxx: delete dead code ...

These files had never been built since being added. At least the C file
doesn't compile due to missing headers. Remove them.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: layerscape: ppa: fix error propagation in ppa_init() ...

On fit_open_image, we returned PTR_ERR(fit) instead of the correct ret.
We also didn't call fit_close as we should. Fix this.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: designware: use proper type for writel argument ...

We need to write DW_IC_ENABLE_ENABLE (1 << 0) to the register to enable,
but instead we were writing true. This happens to work, but is quite
unusual. Make the code more readable.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>