Release v2013.08.1 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ubi: ubi_volume_cdev_read: use pr_debug for debug info ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: base.c: Use correct device-tree in of_add_initrd() ...

Otherwise only the internal DT is modified, not necessarily the one passed
to the kernel.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Release v2013.08.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: bootm: Print Kernel commandline unconditionally ...

The Kernel commandline is an important debugging aid when people
ask why their Kernel won't start, so print it unconditionally.
This is done in !dt mode anyway, so also do it with dt.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Use dts syntax when printing devicetrees ...

Our devicetree printing is close to correct dts syntax, so fix
some remaining differences:

- Use an equal sign instead of a colon to separate a poperty name and
  a value
- Add a semicolon at the end of properties
- Make sure we do not print a separator for empty properties

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: net: Use correct devicetree in eth_of_fixup ...

eth_of_fixup() is passed a devicetree, so use this one instead
of the internal devicetree. This makes sure it also works when
the tree to fixup is not the internal one.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Use correct devicetree in of_print_cmdline ...

of_print_cmdline() is passed a devicetree, so use this one instead
of the internal devicetree. This fixes the cmdline printout when
bootm on ARM is used with an external devicetree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx_v7_defconfig: remove board specific part from environment ...

This makes no sense for a generic defconfig.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

include/printk: fix level of pr_err and pr_warning ...

The level of pr_err and pr_warning were interchanged.

Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ppc ddr-8xxx: misplaced parenthesis ...

Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: spi: Fix spi read procedure ...

Buffer for RX is set incorrectly.

barebox@Phytec phyCORE-i.MX27:/  spi -r 128 -v
device config
    bus_num       = 0
    max_speed_hz  = 1000000
    chip_select   = 0
    mode          = 0x0
    bits_per_word = 8

wrote 0 bytes
00000000:
read 128 bytes
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................
unable to handle paging request at address 0x4dffd3d0
pc : [<a7f05ec4>]    lr : [<a7f05ebc>]
sp : a7fff890  ip : a7fff860  fp : a7f68820
r10: a6ffe9bc  r9 : 00000000  r8 : 00000001
r7 : a6ffe9ec  r6 : a6f00000  r5 : a6ffe9ec  r4 : a6ffe9e4
r3 : a6ffe9e4  r2 : a6ffe9e5  r1 : a6ffe9e4  r0 : 4dffd3cc
Flags: nZCv  IRQs off  FIQs off  Mode SVC_32
...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: mxs: make ssp gates parents of ssp dividers ...

When changing the rates of the ssp clocks we have to poll the
busy bit, but only when they are enabled. The current code can
not check this properly since the gates are registered as children
of the dividers. This has the effect that when the gate is disabled
the busy bit will be set forever resulting in a freezed system.

Fix this by making the gates parents of the dividers which allows
clk_is_enabled to return the correct result.

The Kernel has the same problem, but here the busy polling is
limited to 10ms, so probably noone noticed this.

The datasheet mentions that the ssp dividers shall only be changed
when the clocks are enabled. The kernel and barebox currently ignore
this. I don't know what effect violating this rule has.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: Fix i.MX27 debug uart Kconfig entries ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: generate imx dcd.S files as *.dcd.S ...

The compiled in dcd images generate an intermediate assembly file. Instead
of generating them as *.S generate them as *.dcd.S to better identify them
as generated files. These are then added to .gitignore.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

nand_base: add missing newline ...

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

friendlyarm-tiny210: do not restart barebox twice ...

The old way to boot tiny210 was to restart barebox after loading stage2 image.
This turned out to be unstable and stopped working after barebox refactoring.
Now jump to the same position in the loaded code instead of starting it from
the very beginning.

Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Revert "ARM: i.MX27 pcm038: switch to multi image" ...

This reverts commit 08c0e20.

The external NAND boot code currently uses the _text linker variable
to determine a place for the image. This doesn't work with multi image
support which will link the binary at 0x0. Revert multi image support
for the pcm038 for now until a solution is found.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: animeo IP: fix partition table ...

we now use a UBI Volume instead of user_block, kernel and root
the bootloader size is 320KiB not 256KiB

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

OF: base: initalize from node in of_find_node_with_property ...

This adds initialization of from device node with root_node if NULL
is passed. This corresponds to the behavior of all other node iterators.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

OF: base: fix iterator in of_get_next_available_child ...

of_get_next_available_child does not iterate but always tries the
same node over and over again. This first prepares the entry and
then uses list_for_each_entry_continue, instead of for_each_child_of_node
before.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

OF: base: fix inifinite looping in node iterators ...

of_find_node_by_name suffers from infinite looping, because it
does not check for root node of the tree iterated over. This
fixes this by checking for node->parent to determine whether
the last node has been reached.
Since of_tree_for_each_node does not iterate over the whole tree,
but only over the remaining nodes, rename it to
of_tree_for_each_node_from.

Reported-by: NISHIMOTO Hiroki <hiroki.nishimoto.if@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX6: Fix usbmisc label in devicetree ...

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pcm049: Add platformcode for omap4 framebuffer ...

For splashscreen support on pcm049, this patch adds omap4 framebuffer
platform data and configures display pd050vl1, g104x1, pm070wl4, pd104slf,
edt_etm0350G0dh6, edt_etm0430G0dh6, edt_etmv570G2dhu and edt_etm0700G0dh6

Also add extra  muxing and defconfig

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: add peripheral clocks ...

Only UART clocks are included for now, but the code should cover
other peripherals needs, too.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: add new clock framework driver ...

This removes the existing Tegra CAR driver and replaces it with code
ported from the Linux clock framework.

In the current state only the relevant PLLs are supported, but this is
no functional regression from the existing code.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: deduplicate clk defines ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: allow to instanciate clk mux without registering it ...

Allows to reuse clk mux code within other clocks.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: allow to instanciate clk gate without registering it ...

Allows to reuse the clk gate code within other clocks.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: change clocksource driver to be more lowlevel ...

In order to properly bring up the system PLLs we need a reliable
clocksource. To break the circular dependency between the clocksource
and the CAR driver, get the OSC frequency with a lowlevel function.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>