fs: devfs: implement d_revalidate hook ...

The files in devfs can change withouut the fs layer noticing, so we
have to revalidate dentries before using them.

A failure could be triggered with:

ls /dev/nand0.root.ubi; ubiattach /dev/nand0.root; ls /dev/nand0.root.ubi

The first 'ls' would create a dentry for nand0.root.ubi with no inode
associated since it does not yet exist. 'ubiattach' then creates that
file, but the second 'ls' does not show it since the dentry is not
revalidated and thus no inode is added to that dentry. This patch
fixes this and also the opposite case when a file is removed (for
example with ubidetach).

Reported-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: implement d_revalidate ...

d_revalidate is useful when filesystems change under the hood of the
fs layer. This can happen with network filesystems or with devfs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Release v2018.09.1 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: ubifs: Do not free memory not allocated by ubifs ...

Since the switch to dentry cache implementation we no longer allocate
the super block, so we must not free it in the error path.

Fixes: ("4d2b23bcf9 fs: ubifs: Switch to dentry cache implementation")

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: stat: Do not forget to set errno ...

stat() needs to set errno correctly when returning with an error.

Fixes: b3fbfad7ae ("fs: dentry cache implementation")

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: open: Do not forget to set errno ...

When the initial lookup fails in open we have to go to the error path
which sets errno correctly rather than returning directly.

Fixes: b3fbfad7ae ("fs: dentry cache implementation")

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX28: Add APBH clk support ...

i.MX28 fails to use DMA and NAND because it cannot find its clock.
Add the clock for APBH.

Fixes: 6eb2ba6f1b ("dma: apbh: Enable clock as a part of probing")

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: omap: xload: Fix network boot filename ...

The dhcp code no longer exports the "bootfile" environment variable.
It now uses global.dhcp.bootfile. Since global variable support is
not necessarily part of the MLO we instead use struct dhcp_result *
to get the bootfile information.

Fixes: 528298b702 ("net: dhcp: rework")

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Dennis Menschel <menschel-d@posteo.de>

pci_of_match_device: don't crash on MIPS Malta ...

In arch/mips/mach-malta/pci.c PCI controller is instantiated
without dt and struct pci_controller parent field is NULL.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: fix PCI quirk infrastructure build ...

The commit fc2c618c2038 ("pci: add quirk infrastructure")
adds necessary ld-script changes only for ARM architecture.
As a result, qemu-malta build fails:

     LD      barebox
    drivers/built-in.o: In function `pci_fixup_device':
    (.text.pci_fixup_device+0x30): undefined reference to `__end_pci_fixups_enable'
    (.text.pci_fixup_device+0x38): undefined reference to `__end_pci_fixups_enable'
    (.text.pci_fixup_device+0x34): undefined reference to `__start_pci_fixups_enable'
    (.text.pci_fixup_device+0x3c): undefined reference to `__start_pci_fixups_enable'
    (.text.pci_fixup_device+0x70): undefined reference to `__end_pci_fixups_header'
    (.text.pci_fixup_device+0x78): undefined reference to `__end_pci_fixups_header'
    (.text.pci_fixup_device+0x74): undefined reference to `__start_pci_fixups_header'
    (.text.pci_fixup_device+0x80): undefined reference to `__start_pci_fixups_header'
    (.text.pci_fixup_device+0x2c): undefined reference to `__end_pci_fixups_early'
    (.text.pci_fixup_device+0x88): undefined reference to `__end_pci_fixups_early'
    (.text.pci_fixup_device+0x84): undefined reference to `__start_pci_fixups_early'
    (.text.pci_fixup_device+0x90): undefined reference to `__start_pci_fixups_early'
    make: *** [Makefile:767: barebox] Error 1

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: Multi PBL: Fix image calculation for certain toolchains ...

The current way to calculate the compressed image position works
with the OSELAS toolchains, but not with the Debian/Ubuntu toolchains.
For these toolchains &image_end_marker already returns the correct
address, adding global_variable_offset() to it is wrong.

The solution seems to be to put the image_end_marker into a different
object file so that the compiler cannot play any tricks to resolve
the address internally in the object file.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: devfs: fix r/w permissions ...

The real r/w flags were lost in the switch to dentry cache
implementation. Restore them.

Fixes: 9137c41915 ("fs: devfs: Switch to dentry cache implementation")

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: devfs: Create device files as character devices ...

Without this files in /dev/ appear as regular files. copy_file()
stumbles upon this as it tries a truncate() on that files which
then fails. Create the files as character devices so that copy_file()
works as expected.

Fixes: 9137c41915 ("fs: devfs: Switch to dentry cache implementation")

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Giorgio Dal Molin <giorgio.nicole@arcor.de>

Release v2018.09.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: tftp: Use pr_debug for errors ...

This has been debug output before for good reasons. The users will
usually print the error messages when they want to.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: tftp: improve file size handling ...

Previously we used FILE_SIZE_STREAM unconditionally. Instead, fill the
inode size with a valid filesize if we have one and only if not fall
back to FILE_SIZE_STREAM.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: tftp: hide files which are actually not present on the server ...

In tftp_lookup we claimed that every desired file is there. This leads
to problems when a user only tests if a file is present and makes
decisions upon this information. Rather than claiming that all files
are present do a tftp_do_open() on the files and see if it is really
there.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: tftp: fix return value ...

When tftp_get_inode() fails it is a sign for a out of memory situtation
rather than an indicator for no space left on the filesystem, so return
-ENOMEM.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: tftp: fix memory hole ...

dpath() returns a pointer to an allocated string, so we have to free it.
Put the pointer into our file private data and free it on close time.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: tftp: overhaul debugging ...

- use pr_* instead of debug()
- use pr_vdebug for the less interesting messages
- use pr_err for error messages
- print state as clear text and not as number

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: of_property: copy value instead of resizing ...

Commit 748d1b8 adds the fixup feature to the above command. With this commit an
unwanted free(data) on the freshly set property value is done if someone tries
to set the value of an already present property (not the case for a new
property). Furthermore in fixup mode the pointer fixup->data is freed when the
fixup function is called more than once. This leads to a hanging system after
calling of_dump -F many times.
Fix this issues by copying the data to a new allocated memory area like a new
property is created.

Signed-off-by: Oleg Karfich <oleg.karfich@wago.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: mach-omap: bbu_emmc: Fix return value ...

Update handler returned the written bytes of the partition table on success
instead of 0. Return 0 or error code now.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bbremote: add missing 'md' packet handler ...

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: MMU: fix wrong dma_flush_range in arm_create_pte() ...

Since 7ba0f2d299 arm_create_pte() flushes the page table entries itself
and it's no longer done in arch_remap_range(). Unfortunately it does
not flush the modified 1st level page table entry, but instead the base
of the page table. Fix it up.

Fixes: 7ba0f2d299 ARM: mmu: fix cache flushing when replacing a section with a PTE

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/state'

Merge branch 'for-next/socfpga'

Merge branch 'for-next/pci'

Merge branch 'for-next/misc'

Merge branch 'for-next/memcmds'

Merge branch 'for-next/imx'