diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9589a6a..a4a4e03 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -106,6 +106,7 @@
 	select COMMON_CLK
 	select CLKDEV_LOOKUP
 	select COMMON_CLK_OF_PROVIDER
+	select HW_HAS_PCI
 
 config ARCH_MVEBU
 	bool "Marvell EBU platforms"
diff --git a/arch/x86/mach-efi/elf_x86_64_efi.lds.S b/arch/x86/mach-efi/elf_x86_64_efi.lds.S
index 40a9425..ed79118 100644
--- a/arch/x86/mach-efi/elf_x86_64_efi.lds.S
+++ b/arch/x86/mach-efi/elf_x86_64_efi.lds.S
@@ -58,12 +58,7 @@
 	. = ALIGN(4096);
 
 	.rela : {
-		*(.rela.data*)
-		*(.rela.barebox*)
-		*(.rela.initcall*)
-		*(.rela.exitcall*)
-		*(.rela.got)
-		*(.rela.stab)
+		*(.rela*)
 	}
 
 	. = ALIGN(4096);
diff --git a/common/efi/efi.c b/common/efi/efi.c
index 73cea37..ed81583 100644
--- a/common/efi/efi.c
+++ b/common/efi/efi.c
@@ -361,7 +361,7 @@
 	if (EFI_ERROR(efiret))
 		panic("failed to allocate malloc pool: %s\n",
 		      efi_strerror(efiret));
-	mem_malloc_init((void *)mem, (void *)mem + memsize);
+	mem_malloc_init((void *)mem, (void *)mem + memsize - 1);
 
 	start_barebox();
 
diff --git a/drivers/block/efi-block-io.c b/drivers/block/efi-block-io.c
index 39dbfb0..30db486 100644
--- a/drivers/block/efi-block-io.c
+++ b/drivers/block/efi-block-io.c
@@ -131,16 +131,9 @@
 			media->optimal_transfer_length_granularity);
 }
 
-static int is_bio_usbdev(struct efi_device *efidev)
+static bool is_bio_usbdev(struct efi_device *efidev)
 {
-	int i;
-
-	for (i = 0; i < efidev->num_guids; i++) {
-		if (!efi_guidcmp(efidev->guids[i], EFI_USB_IO_PROTOCOL_GUID))
-			return 1;
-	}
-
-	return 0;
+	return efi_device_has_guid(efidev, EFI_USB_IO_PROTOCOL_GUID);
 }
 
 static int efi_bio_probe(struct efi_device *efidev)
diff --git a/drivers/efi/efi-device.c b/drivers/efi/efi-device.c
index a1aac2d..ac035dc 100644
--- a/drivers/efi/efi-device.c
+++ b/drivers/efi/efi-device.c
@@ -386,16 +386,9 @@
 	return ret != 1;
 }
 
-static int is_bio_usbdev(struct efi_device *efidev)
+static bool is_bio_usbdev(struct efi_device *efidev)
 {
-	int i;
-
-	for (i = 0; i < efidev->num_guids; i++) {
-		if (!efi_guidcmp(efidev->guids[i], EFI_USB_IO_PROTOCOL_GUID))
-			return 1;
-	}
-
-	return 0;
+	return efi_device_has_guid(efidev, EFI_USB_IO_PROTOCOL_GUID);
 }
 
 static struct efi_device *bootdev;
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 44a89d0..025c418 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -47,6 +47,13 @@
 	select OF_PCI
 	select PCI
 
+config PCI_LAYERSCAPE
+	bool "Freescale Layerscape PCIe controller"
+	depends on ARCH_LAYERSCAPE
+	select PCIE_DW
+	select OF_PCI
+	select PCI
+
 endmenu
 
 endif
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 562304c..3ca6708 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -11,3 +11,4 @@
 obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
 obj-$(CONFIG_PCIE_DW) += pcie-designware.o pcie-designware-host.o
 obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
+obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index ac15623..251be4f 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -23,6 +23,32 @@
 	return NULL;
 }
 
+/**
+ * pci_match_id - See if a pci device matches a given pci_id table
+ * @ids: array of PCI device id structures to search in
+ * @dev: the PCI device structure to match against.
+ *
+ * Used by a driver to check whether a PCI device present in the
+ * system is in its list of supported devices.  Returns the matching
+ * pci_device_id structure or %NULL if there is no match.
+ *
+ * Deprecated, don't use this as it will not catch any dynamic ids
+ * that a driver might want to check for.
+ */
+const struct pci_device_id *pci_match_id(const struct pci_device_id *ids,
+					 struct pci_dev *dev)
+{
+	if (ids) {
+		while (ids->vendor || ids->subvendor || ids->class_mask) {
+			if (pci_match_one_device(ids, dev))
+				return ids;
+			ids++;
+		}
+	}
+	return NULL;
+}
+EXPORT_SYMBOL(pci_match_id);
+
 static int pci_match(struct device_d *dev, struct driver_d *drv)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
diff --git a/drivers/pci/pci-imx6.c b/drivers/pci/pci-imx6.c
index 85307ba..05df9c0 100644
--- a/drivers/pci/pci-imx6.c
+++ b/drivers/pci/pci-imx6.c
@@ -97,8 +97,6 @@
 #define PCIE_PL_PFLR (PL_OFFSET + 0x08)
 #define PCIE_PL_PFLR_LINK_STATE_MASK		(0x3f << 16)
 #define PCIE_PL_PFLR_FORCE_LINK			(1 << 15)
-#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
-#define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING	(1 << 29)
 #define PCIE_PHY_DEBUG_R1_XMLH_LINK_UP		(1 << 4)
 
 #define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
@@ -112,7 +110,6 @@
 #define PCIE_PHY_STAT_ACK_LOC 16
 
 #define PCIE_LINK_WIDTH_SPEED_CONTROL	0x80C
-#define PORT_LOGIC_SPEED_CHANGE		(0x1 << 17)
 
 /* PHY registers (not memory-mapped) */
 #define PCIE_PHY_RX_ASIC_OUT 0x100D
@@ -636,8 +633,8 @@
 
 err_reset_phy:
        dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n",
-               dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R0),
-               dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1));
+               dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
+               dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
        imx6_pcie_reset_phy(imx6_pcie);
 
        return ret;
@@ -659,8 +656,8 @@
 
 static int imx6_pcie_link_up(struct dw_pcie *pci)
 {
-	return dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1) &
-		PCIE_PHY_DEBUG_R1_XMLH_LINK_UP;
+	return dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1) &
+		PCIE_PORT_DEBUG1_LINK_UP;
 }
 
 static const struct dw_pcie_ops dw_pcie_ops = {
diff --git a/drivers/pci/pci-layerscape.c b/drivers/pci/pci-layerscape.c
new file mode 100644
index 0000000..ccdc025
--- /dev/null
+++ b/drivers/pci/pci-layerscape.c
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe host controller driver for Freescale Layerscape SoCs
+ *
+ * Copyright (C) 2014 Freescale Semiconductor.
+ *
+ * Author: Minghuan Lian <Minghuan.Lian@freescale.com>
+ */
+
+#include <common.h>
+#include <clock.h>
+#include <abort.h>
+#include <malloc.h>
+#include <io.h>
+#include <init.h>
+#include <gpio.h>
+#include <asm/mmu.h>
+#include <of_gpio.h>
+#include <of_device.h>
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <of_address.h>
+#include <of_pci.h>
+#include <regmap.h>
+#include <mfd/syscon.h>
+#include <linux/pci.h>
+#include <linux/phy/phy.h>
+#include <linux/reset.h>
+#include <linux/sizes.h>
+
+#include "pcie-designware.h"
+
+/* PEX1/2 Misc Ports Status Register */
+#define SCFG_PEXMSCPORTSR(pex_idx)	(0x94 + (pex_idx) * 4)
+#define LTSSM_STATE_SHIFT	20
+#define LTSSM_STATE_MASK	0x3f
+#define LTSSM_PCIE_L0		0x11 /* L0 state */
+
+/* PEX Internal Configuration Registers */
+#define PCIE_STRFMR1		0x71c /* Symbol Timer & Filter Mask Register1 */
+#define PCIE_ABSERR		0x8d0 /* Bridge Slave Error Response Register */
+#define PCIE_ABSERR_SETTING	0x9401 /* Forward error of non-posted request */
+
+#define PCIE_IATU_NUM		6
+
+#define PCIE_LUT_UDR(n)                (0x800 + (n) * 8)
+#define PCIE_LUT_ENABLE                (1 << 31)
+#define PCIE_LUT_LDR(n)                (0x804 + (n) * 8)
+
+struct ls_pcie_drvdata {
+	u32 lut_offset;
+	u32 ltssm_shift;
+	u32 lut_dbg;
+	int pex_stream_id_start;
+	int pex_stream_id_end;
+	const struct dw_pcie_host_ops *ops;
+	const struct dw_pcie_ops *dw_pcie_ops;
+};
+
+struct ls_pcie {
+	struct dw_pcie pci;
+	void __iomem *lut;
+	struct regmap *scfg;
+	const char *compatible;
+	const struct ls_pcie_drvdata *drvdata;
+	int index;
+	int next_lut_index;
+};
+
+static struct ls_pcie *to_ls_pcie(struct dw_pcie *pci)
+{
+	return container_of(pci, struct ls_pcie, pci);
+}
+
+static u32 lut_readl(struct ls_pcie *pcie, unsigned int offset)
+{
+	return in_be32(pcie->lut + offset);
+}
+
+static void lut_writel(struct ls_pcie *pcie, unsigned int value,
+		       unsigned int offset)
+{
+	out_be32(pcie->lut + offset, value);
+}
+
+static int ls_pcie_next_streamid(struct ls_pcie *pcie)
+{
+	static int next_stream_id;
+	int first = pcie->drvdata->pex_stream_id_start;
+	int last = pcie->drvdata->pex_stream_id_end;
+	int current = next_stream_id + first;
+
+	if (current  > last)
+		return -EINVAL;
+
+	next_stream_id++;
+
+	return current;
+}
+
+#define PCIE_LUT_ENTRY_COUNT    32
+
+static int ls_pcie_next_lut_index(struct ls_pcie *pcie)
+{
+	if (pcie->next_lut_index < PCIE_LUT_ENTRY_COUNT)
+		return pcie->next_lut_index++;
+	else
+		return -ENOSPC;  /* LUT is full */
+}
+
+static void ls_pcie_lut_set_mapping(struct ls_pcie *pcie, int index, u32 devid,
+				    u32 stream_id)
+{
+	/* leave mask as all zeroes, want to match all bits */
+	lut_writel(pcie, devid << 16, PCIE_LUT_UDR(index));
+	lut_writel(pcie, stream_id | PCIE_LUT_ENABLE, PCIE_LUT_LDR(index));
+}
+
+static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
+{
+	struct dw_pcie *pci = &pcie->pci;
+	u32 header_type;
+
+	header_type = ioread8(pci->dbi_base + PCI_HEADER_TYPE);
+	header_type &= 0x7f;
+
+	return header_type == PCI_HEADER_TYPE_BRIDGE;
+}
+
+/* Clear multi-function bit */
+static void ls_pcie_clear_multifunction(struct ls_pcie *pcie)
+{
+	struct dw_pcie *pci = &pcie->pci;
+
+	iowrite8(PCI_HEADER_TYPE_BRIDGE, pci->dbi_base + PCI_HEADER_TYPE);
+}
+
+/* Drop MSG TLP except for Vendor MSG */
+static void ls_pcie_drop_msg_tlp(struct ls_pcie *pcie)
+{
+	u32 val;
+	struct dw_pcie *pci = &pcie->pci;
+
+	val = ioread32(pci->dbi_base + PCIE_STRFMR1);
+	val &= 0xDFFFFFFF;
+	iowrite32(val, pci->dbi_base + PCIE_STRFMR1);
+}
+
+static void ls_pcie_disable_outbound_atus(struct ls_pcie *pcie)
+{
+	int i;
+
+	for (i = 0; i < PCIE_IATU_NUM; i++)
+		dw_pcie_disable_atu(&pcie->pci, i, DW_PCIE_REGION_OUTBOUND);
+}
+
+static int ls1021_pcie_link_up(struct dw_pcie *pci)
+{
+	u32 state;
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+
+	if (!pcie->scfg)
+		return 0;
+
+	regmap_read(pcie->scfg, SCFG_PEXMSCPORTSR(pcie->index), &state);
+	state = (state >> LTSSM_STATE_SHIFT) & LTSSM_STATE_MASK;
+
+	if (state < LTSSM_PCIE_L0)
+		return 0;
+
+	return 1;
+}
+
+static int ls_pcie_link_up(struct dw_pcie *pci)
+{
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+	u32 state;
+
+	state = (ioread32(pcie->lut + pcie->drvdata->lut_dbg) >>
+		 pcie->drvdata->ltssm_shift) &
+		 LTSSM_STATE_MASK;
+
+	if (state < LTSSM_PCIE_L0)
+		return 0;
+
+	return 1;
+}
+
+/* Forward error response of outbound non-posted requests */
+static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
+{
+	struct dw_pcie *pci = &pcie->pci;
+
+	iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR);
+}
+
+static int ls_pcie_host_init(struct pcie_port *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+
+	/*
+	 * Disable outbound windows configured by the bootloader to avoid
+	 * one transaction hitting multiple outbound windows.
+	 * dw_pcie_setup_rc() will reconfigure the outbound windows.
+	 */
+	ls_pcie_disable_outbound_atus(pcie);
+	ls_pcie_fix_error_response(pcie);
+
+	dw_pcie_dbi_ro_wr_en(pci);
+	ls_pcie_clear_multifunction(pcie);
+	dw_pcie_dbi_ro_wr_dis(pci);
+
+	ls_pcie_drop_msg_tlp(pcie);
+
+	dw_pcie_setup_rc(pp);
+
+	return 0;
+}
+
+static int ls1021_pcie_host_init(struct pcie_port *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+	struct device_d *dev = pci->dev;
+	u32 index[2];
+	int ret;
+
+	pcie->scfg = syscon_regmap_lookup_by_phandle(dev->device_node,
+						     "fsl,pcie-scfg");
+	if (IS_ERR(pcie->scfg)) {
+		ret = PTR_ERR(pcie->scfg);
+		dev_err(dev, "No syscfg phandle specified\n");
+		pcie->scfg = NULL;
+		return ret;
+	}
+
+	if (of_property_read_u32_array(dev->device_node,
+				       "fsl,pcie-scfg", index, 2)) {
+		pcie->scfg = NULL;
+		return -EINVAL;
+	}
+	pcie->index = index[1];
+
+	return ls_pcie_host_init(pp);
+}
+
+static const struct dw_pcie_host_ops ls1021_pcie_host_ops = {
+	.host_init = ls1021_pcie_host_init,
+};
+
+static const struct dw_pcie_host_ops ls_pcie_host_ops = {
+	.host_init = ls_pcie_host_init,
+};
+
+static const struct dw_pcie_ops dw_ls1021_pcie_ops = {
+	.link_up = ls1021_pcie_link_up,
+};
+
+static const struct dw_pcie_ops dw_ls_pcie_ops = {
+	.link_up = ls_pcie_link_up,
+};
+
+static const struct ls_pcie_drvdata ls1021_drvdata = {
+	.ops = &ls1021_pcie_host_ops,
+	.dw_pcie_ops = &dw_ls1021_pcie_ops,
+};
+
+static const struct ls_pcie_drvdata ls1043_drvdata = {
+	.lut_offset = 0x10000,
+	.ltssm_shift = 24,
+	.lut_dbg = 0x7fc,
+	.pex_stream_id_start = 11,
+	.pex_stream_id_end = 26,
+	.ops = &ls_pcie_host_ops,
+	.dw_pcie_ops = &dw_ls_pcie_ops,
+};
+
+static const struct ls_pcie_drvdata ls1046_drvdata = {
+	.lut_offset = 0x80000,
+	.ltssm_shift = 24,
+	.lut_dbg = 0x407fc,
+	.pex_stream_id_start = 11,
+	.pex_stream_id_end = 26,
+	.ops = &ls_pcie_host_ops,
+	.dw_pcie_ops = &dw_ls_pcie_ops,
+};
+
+static const struct ls_pcie_drvdata ls2080_drvdata = {
+	.lut_offset = 0x80000,
+	.ltssm_shift = 0,
+	.lut_dbg = 0x7fc,
+	.pex_stream_id_start = 7,
+	.pex_stream_id_end = 22,
+	.ops = &ls_pcie_host_ops,
+	.dw_pcie_ops = &dw_ls_pcie_ops,
+};
+
+static const struct ls_pcie_drvdata ls2088_drvdata = {
+	.lut_offset = 0x80000,
+	.ltssm_shift = 0,
+	.lut_dbg = 0x407fc,
+	.pex_stream_id_start = 7,
+	.pex_stream_id_end = 18,
+	.ops = &ls_pcie_host_ops,
+	.dw_pcie_ops = &dw_ls_pcie_ops,
+};
+
+static const struct of_device_id ls_pcie_of_match[] = {
+	{ .compatible = "fsl,ls1012a-pcie", .data = &ls1046_drvdata },
+	{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021_drvdata },
+	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1043_drvdata },
+	{ .compatible = "fsl,ls1046a-pcie", .data = &ls1046_drvdata },
+	{ .compatible = "fsl,ls2080a-pcie", .data = &ls2080_drvdata },
+	{ .compatible = "fsl,ls2085a-pcie", .data = &ls2080_drvdata },
+	{ .compatible = "fsl,ls2088a-pcie", .data = &ls2088_drvdata },
+	{ .compatible = "fsl,ls1088a-pcie", .data = &ls2088_drvdata },
+	{ },
+};
+
+static int __init ls_add_pcie_port(struct ls_pcie *pcie)
+{
+	struct dw_pcie *pci = &pcie->pci;
+	struct pcie_port *pp = &pci->pp;
+	struct device_d *dev = pci->dev;
+	int ret;
+
+	pp->ops = pcie->drvdata->ops;
+
+	ret = dw_pcie_host_init(pp);
+	if (ret) {
+		dev_err(dev, "failed to initialize host\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ls_pcie_of_fixup(struct device_node *root, void *ctx)
+{
+	struct ls_pcie *pcie = ctx;
+	struct device_d *dev = pcie->pci.dev;
+	struct device_node *np;
+	char *name;
+	u32 *arr, phandle;
+	int nluts;
+	int ret, i;
+	u32 devid, stream_id;
+
+	name = of_get_reproducible_name(dev->device_node);
+
+	np = root;
+	do {
+		np = of_find_node_by_reproducible_name(np, name);
+		if (!np)
+			return -ENODEV;
+	} while (!of_device_is_compatible(np, pcie->compatible));
+
+	nluts = pcie->next_lut_index;
+
+	ret = of_property_read_u32(np, "msi-parent", &phandle);
+	if (ret) {
+		dev_err(pcie->pci.dev, "Unable to get \"msi-parent\" phandle\n");
+		return ret;
+	}
+
+	arr = xmalloc(nluts * sizeof(u32) * 4);
+
+	for (i = 0; i < nluts; i++) {
+		u32 udr = lut_readl(pcie, PCIE_LUT_UDR(i));
+		u32 ldr = lut_readl(pcie, PCIE_LUT_LDR(i));
+
+		if (!(ldr & PCIE_LUT_ENABLE))
+			break;
+
+		devid = udr >> 16;
+		stream_id = ldr & 0x7fff;
+
+		arr[i * 4] = devid;
+		arr[i * 4 + 1] = phandle;
+		arr[i * 4 + 2] = stream_id;
+		arr[i * 4 + 3] = 1;
+	}
+
+	/*
+	 * An msi-map is a property to be added to the pci controller
+	 * node.  It is a table, where each entry consists of 4 fields
+	 * e.g.:
+	 *
+	 *      msi-map = <[devid] [phandle-to-msi-ctrl] [stream-id] [count]
+	 *                 [devid] [phandle-to-msi-ctrl] [stream-id] [count]>;
+	 */
+
+	ret = of_property_write_u32_array(np, "msi-map", arr, nluts * 4);
+	if (ret)
+		goto out;
+
+	of_device_enable(np);
+
+	ret = 0;
+
+out:
+	free(arr);
+	return ret;
+}
+
+static int __init ls_pcie_probe(struct device_d *dev)
+{
+	struct dw_pcie *pci;
+	struct ls_pcie *pcie;
+	struct resource *dbi_base;
+	const struct of_device_id *match;
+	int ret;
+
+	pcie = xzalloc(sizeof(*pcie));
+	if (!pcie)
+		return -ENOMEM;
+
+	pci = &pcie->pci;
+
+	match = of_match_device(dev->driver->of_compatible, dev);
+	if (!match)
+		return -ENODEV;
+
+	pcie->drvdata = match->data;
+	pcie->compatible = match->compatible;
+
+	pci->dev = dev;
+	pci->ops = pcie->drvdata->dw_pcie_ops;
+
+	dbi_base = dev_request_mem_resource(dev, 0);
+	if (IS_ERR(dbi_base))
+		return PTR_ERR(dbi_base);
+
+	pci->dbi_base = IOMEM(dbi_base->start);
+
+	pcie->lut = pci->dbi_base + pcie->drvdata->lut_offset;
+
+	if (!ls_pcie_is_bridge(pcie))
+		return -ENODEV;
+
+	dev->priv = pcie;
+
+	ret = ls_add_pcie_port(pcie);
+	if (ret < 0)
+		return ret;
+
+	of_register_fixup(ls_pcie_of_fixup, pcie);
+
+	return 0;
+}
+
+static struct driver_d ls_pcie_driver = {
+	.name = "layerscape-pcie",
+	.of_compatible = DRV_OF_COMPAT(ls_pcie_of_match),
+	.probe = ls_pcie_probe,
+};
+device_platform_driver(ls_pcie_driver);
+
+static void ls_pcie_fixup(struct pci_dev *pcidev)
+{
+	struct pci_bus *bus = pcidev->bus, *p;
+	struct pci_controller *host = bus->host;
+	struct pcie_port *pp = container_of(host, struct pcie_port, pci);
+	struct dw_pcie *dwpcie = container_of(pp, struct dw_pcie, pp);
+	struct ls_pcie *lspcie = container_of(dwpcie, struct ls_pcie, pci);
+	int stream_id, index;
+	int base_bus_num = 0;
+
+	stream_id = ls_pcie_next_streamid(lspcie);
+	index = ls_pcie_next_lut_index(lspcie);
+
+	p = pcidev->bus;
+	while (p) {
+		base_bus_num = p->number;
+		p = p->parent_bus;
+	}
+
+	ls_pcie_lut_set_mapping(lspcie, index,
+				(pcidev->bus->number - base_bus_num) << 8 | pcidev->devfn,
+				stream_id);
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ls_pcie_fixup);
diff --git a/drivers/pci/pcie-designware-host.c b/drivers/pci/pcie-designware-host.c
index 7a95b2a..b2d46d3 100644
--- a/drivers/pci/pcie-designware-host.c
+++ b/drivers/pci/pcie-designware-host.c
@@ -340,17 +340,6 @@
 	.write = dw_pcie_wr_conf,
 };
 
-static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci)
-{
-	u32 val;
-
-	val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT);
-	if (val == 0xffffffff)
-		return 1;
-
-	return 0;
-}
-
 void dw_pcie_setup_rc(struct pcie_port *pp)
 {
 	u32 val;
@@ -381,11 +370,6 @@
         * we should not program the ATU here.
         */
 	if (!pp->ops->rd_other_conf) {
-		/* get iATU unroll support */
-		pci->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pci);
-		dev_dbg(pci->dev, "iATU unroll: %s\n",
-			pci->iatu_unroll_enabled ? "enabled" : "disabled");
-
 		dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX0,
 					  PCIE_ATU_TYPE_MEM, pp->mem_mod_base,
 					  pp->mem_bus_addr, pp->mem_size);
diff --git a/drivers/pci/pcie-designware.c b/drivers/pci/pcie-designware.c
index c6d1955..e2007db 100644
--- a/drivers/pci/pcie-designware.c
+++ b/drivers/pci/pcie-designware.c
@@ -29,7 +29,7 @@
 
 int dw_pcie_read(void __iomem *addr, int size, u32 *val)
 {
-	if ((uintptr_t)addr & (size - 1)) {
+	if (!IS_ALIGNED((uintptr_t)addr, size)) {
 		*val = 0;
 		return PCIBIOS_BAD_REGISTER_NUMBER;
 	}
@@ -50,7 +50,7 @@
 
 int dw_pcie_write(void __iomem *addr, int size, u32 val)
 {
-	if ((uintptr_t)addr & (size - 1))
+	if (!IS_ALIGNED((uintptr_t)addr, size))
 		return PCIBIOS_BAD_REGISTER_NUMBER;
 
 	if (size == 4)
@@ -65,42 +65,69 @@
 	return PCIBIOS_SUCCESSFUL;
 }
 
-u32 __dw_pcie_readl_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
-			size_t size)
+u32 dw_pcie_read_dbi(struct dw_pcie *pci, u32 reg, size_t size)
 {
 	int ret;
 	u32 val;
 
-	if (pci->ops->readl_dbi)
-		return pci->ops->readl_dbi(pci, base, reg, size);
+	if (pci->ops->read_dbi)
+		return pci->ops->read_dbi(pci, pci->dbi_base, reg, size);
 
-	ret = dw_pcie_read(base + reg, size, &val);
+	ret = dw_pcie_read(pci->dbi_base + reg, size, &val);
 	if (ret)
 		dev_err(pci->dev, "Read DBI address failed\n");
 
 	return val;
 }
 
-void __dw_pcie_writel_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
-			  size_t size, u32 val)
+void dw_pcie_write_dbi(struct dw_pcie *pci, u32 reg, size_t size, u32 val)
 {
 	int ret;
 
-	if (pci->ops->writel_dbi) {
-		pci->ops->writel_dbi(pci, base, reg, size, val);
+	if (pci->ops->write_dbi) {
+		pci->ops->write_dbi(pci, pci->dbi_base, reg, size, val);
 		return;
 	}
 
-	ret = dw_pcie_write(base + reg, size, val);
+	ret = dw_pcie_write(pci->dbi_base + reg, size, val);
 	if (ret)
 		dev_err(pci->dev, "Write DBI address failed\n");
 }
 
+u32 dw_pcie_read_atu(struct dw_pcie *pci, u32 reg, size_t size)
+{
+	int ret;
+	u32 val;
+
+	if (pci->ops->read_dbi)
+		return pci->ops->read_dbi(pci, pci->atu_base, reg, size);
+
+	ret = dw_pcie_read(pci->atu_base + reg, size, &val);
+	if (ret)
+		dev_err(pci->dev, "Read ATU address failed\n");
+
+	return val;
+}
+
+void dw_pcie_write_atu(struct dw_pcie *pci, u32 reg, size_t size, u32 val)
+{
+	int ret;
+
+	if (pci->ops->write_dbi) {
+		pci->ops->write_dbi(pci, pci->atu_base, reg, size, val);
+		return;
+	}
+
+	ret = dw_pcie_write(pci->atu_base + reg, size, val);
+	if (ret)
+		dev_err(pci->dev, "Write ATU address failed\n");
+}
+
 static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg)
 {
 	u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
 
-	return dw_pcie_readl_dbi(pci, offset + reg);
+	return dw_pcie_readl_atu(pci, offset + reg);
 }
 
 static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index,
@@ -108,7 +135,7 @@
 {
 	u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
 
-	dw_pcie_writel_dbi(pci, offset + reg, val);
+	dw_pcie_writel_atu(pci, offset + reg, val);
 }
 
 static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index,
@@ -188,6 +215,26 @@
 	dev_err(pci->dev, "Outbound iATU is not being enabled\n");
 }
 
+void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
+			 enum dw_pcie_region_type type)
+{
+	int region;
+
+	switch (type) {
+	case DW_PCIE_REGION_INBOUND:
+		region = PCIE_ATU_REGION_INBOUND;
+		break;
+	case DW_PCIE_REGION_OUTBOUND:
+		region = PCIE_ATU_REGION_OUTBOUND;
+		break;
+	default:
+		return;
+	}
+
+	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, region | index);
+	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, (u32)~PCIE_ATU_ENABLE);
+}
+
 int dw_pcie_wait_for_link(struct dw_pcie *pci)
 {
 	int retries;
@@ -213,9 +260,20 @@
 	if (pci->ops->link_up)
 		return pci->ops->link_up(pci);
 
-	val = readl(pci->dbi_base + PCIE_PHY_DEBUG_R1);
-	return ((val & PCIE_PHY_DEBUG_R1_LINK_UP) &&
-		!(val & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING));
+	val = readl(pci->dbi_base + PCIE_PORT_DEBUG1);
+	return ((val & PCIE_PORT_DEBUG1_LINK_UP) &&
+		(!(val & PCIE_PORT_DEBUG1_LINK_IN_TRAINING)));
+}
+
+static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci)
+{
+	u32 val;
+
+	val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT);
+	if (val == 0xffffffff)
+		return 1;
+
+	return 0;
 }
 
 void dw_pcie_setup(struct dw_pcie *pci)
@@ -226,9 +284,21 @@
 	struct device_d *dev = pci->dev;
 	struct device_node *np = dev->device_node;
 
+	if (pci->version >= 0x480A || (!pci->version &&
+				       dw_pcie_iatu_unroll_enabled(pci))) {
+		pci->iatu_unroll_enabled = true;
+		if (!pci->atu_base)
+			pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
+	}
+	dev_dbg(pci->dev, "iATU unroll: %s\n", pci->iatu_unroll_enabled ?
+		"enabled" : "disabled");
+
+
 	ret = of_property_read_u32(np, "num-lanes", &lanes);
-	if (ret)
-		lanes = 0;
+	if (ret) {
+		dev_dbg(pci->dev, "property num-lanes isn't found\n");
+		return;
+	}
 
 	/* Set the number of lanes */
 	val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL);
diff --git a/drivers/pci/pcie-designware.h b/drivers/pci/pcie-designware.h
index 058a0ac..de20654 100644
--- a/drivers/pci/pcie-designware.h
+++ b/drivers/pci/pcie-designware.h
@@ -11,6 +11,8 @@
 #ifndef _PCIE_DESIGNWARE_H
 #define _PCIE_DESIGNWARE_H
 
+#include <linux/bitfield.h>
+
 /* Parameters for the waiting for link up routine */
 #define LINK_WAIT_MAX_RETRIES		10
 #define LINK_WAIT_USLEEP_MAX		100000
@@ -19,19 +21,30 @@
 #define LINK_WAIT_MAX_IATU_RETRIES     5
 #define LINK_WAIT_IATU_MAX             10000
 
-/* Synopsis specific PCIE configuration registers */
+/* Synopsys-specific PCIe configuration registers */
 #define PCIE_PORT_LINK_CONTROL		0x710
-#define PORT_LINK_MODE_MASK		(0x3f << 16)
-#define PORT_LINK_MODE_1_LANES		(0x1 << 16)
-#define PORT_LINK_MODE_2_LANES		(0x3 << 16)
-#define PORT_LINK_MODE_4_LANES		(0x7 << 16)
+#define PORT_LINK_MODE_MASK		GENMASK(21, 16)
+#define PORT_LINK_MODE(n)		FIELD_PREP(PORT_LINK_MODE_MASK, n)
+#define PORT_LINK_MODE_1_LANES		PORT_LINK_MODE(0x1)
+#define PORT_LINK_MODE_2_LANES		PORT_LINK_MODE(0x3)
+#define PORT_LINK_MODE_4_LANES		PORT_LINK_MODE(0x7)
+#define PORT_LINK_MODE_8_LANES		PORT_LINK_MODE(0xf)
+
+#define PCIE_PORT_DEBUG0		0x728
+#define PORT_LOGIC_LTSSM_STATE_MASK	0x1f
+#define PORT_LOGIC_LTSSM_STATE_L0	0x11
+#define PCIE_PORT_DEBUG1		0x72C
+#define PCIE_PORT_DEBUG1_LINK_UP		BIT(4)
+#define PCIE_PORT_DEBUG1_LINK_IN_TRAINING	BIT(29)
 
 #define PCIE_LINK_WIDTH_SPEED_CONTROL	0x80C
-#define PORT_LOGIC_SPEED_CHANGE		(0x1 << 17)
-#define PORT_LOGIC_LINK_WIDTH_MASK	(0x1f << 8)
-#define PORT_LOGIC_LINK_WIDTH_1_LANES	(0x1 << 8)
-#define PORT_LOGIC_LINK_WIDTH_2_LANES	(0x2 << 8)
-#define PORT_LOGIC_LINK_WIDTH_4_LANES	(0x4 << 8)
+#define PORT_LOGIC_SPEED_CHANGE		BIT(17)
+#define PORT_LOGIC_LINK_WIDTH_MASK	GENMASK(12, 8)
+#define PORT_LOGIC_LINK_WIDTH(n)	FIELD_PREP(PORT_LOGIC_LINK_WIDTH_MASK, n)
+#define PORT_LOGIC_LINK_WIDTH_1_LANES	PORT_LOGIC_LINK_WIDTH(0x1)
+#define PORT_LOGIC_LINK_WIDTH_2_LANES	PORT_LOGIC_LINK_WIDTH(0x2)
+#define PORT_LOGIC_LINK_WIDTH_4_LANES	PORT_LOGIC_LINK_WIDTH(0x4)
+#define PORT_LOGIC_LINK_WIDTH_8_LANES	PORT_LOGIC_LINK_WIDTH(0x8)
 
 #define PCIE_MSI_ADDR_LO		0x820
 #define PCIE_MSI_ADDR_HI		0x824
@@ -40,61 +53,86 @@
 #define PCIE_MSI_INTR0_STATUS		0x830
 
 #define PCIE_ATU_VIEWPORT		0x900
-#define PCIE_ATU_REGION_INBOUND		(0x1 << 31)
-#define PCIE_ATU_REGION_OUTBOUND	(0x0 << 31)
-#define PCIE_ATU_REGION_INDEX2		(0x2 << 0)
-#define PCIE_ATU_REGION_INDEX1		(0x1 << 0)
-#define PCIE_ATU_REGION_INDEX0		(0x0 << 0)
+#define PCIE_ATU_REGION_INBOUND		BIT(31)
+#define PCIE_ATU_REGION_OUTBOUND	0
+#define PCIE_ATU_REGION_INDEX2		0x2
+#define PCIE_ATU_REGION_INDEX1		0x1
+#define PCIE_ATU_REGION_INDEX0		0x0
 #define PCIE_ATU_CR1			0x904
-#define PCIE_ATU_TYPE_MEM		(0x0 << 0)
-#define PCIE_ATU_TYPE_IO		(0x2 << 0)
-#define PCIE_ATU_TYPE_CFG0		(0x4 << 0)
-#define PCIE_ATU_TYPE_CFG1		(0x5 << 0)
+#define PCIE_ATU_TYPE_MEM		0x0
+#define PCIE_ATU_TYPE_IO		0x2
+#define PCIE_ATU_TYPE_CFG0		0x4
+#define PCIE_ATU_TYPE_CFG1		0x5
 #define PCIE_ATU_CR2			0x908
-#define PCIE_ATU_ENABLE			(0x1 << 31)
-#define PCIE_ATU_BAR_MODE_ENABLE	(0x1 << 30)
+#define PCIE_ATU_ENABLE			BIT(31)
+#define PCIE_ATU_BAR_MODE_ENABLE	BIT(30)
 #define PCIE_ATU_LOWER_BASE		0x90C
 #define PCIE_ATU_UPPER_BASE		0x910
 #define PCIE_ATU_LIMIT			0x914
 #define PCIE_ATU_LOWER_TARGET		0x918
-#define PCIE_ATU_BUS(x)			(((x) & 0xff) << 24)
-#define PCIE_ATU_DEV(x)			(((x) & 0x1f) << 19)
-#define PCIE_ATU_FUNC(x)		(((x) & 0x7) << 16)
+#define PCIE_ATU_BUS(x)			FIELD_PREP(GENMASK(31, 24), x)
+#define PCIE_ATU_DEV(x)			FIELD_PREP(GENMASK(23, 19), x)
+#define PCIE_ATU_FUNC(x)		FIELD_PREP(GENMASK(18, 16), x)
 #define PCIE_ATU_UPPER_TARGET		0x91C
 
+#define PCIE_MISC_CONTROL_1_OFF		0x8BC
+#define PCIE_DBI_RO_WR_EN		BIT(0)
+
+#define PCIE_PL_CHK_REG_CONTROL_STATUS			0xB20
+#define PCIE_PL_CHK_REG_CHK_REG_START			BIT(0)
+#define PCIE_PL_CHK_REG_CHK_REG_CONTINUOUS		BIT(1)
+#define PCIE_PL_CHK_REG_CHK_REG_COMPARISON_ERROR	BIT(16)
+#define PCIE_PL_CHK_REG_CHK_REG_LOGIC_ERROR		BIT(17)
+#define PCIE_PL_CHK_REG_CHK_REG_COMPLETE		BIT(18)
+
+#define PCIE_PL_CHK_REG_ERR_ADDR			0xB28
+
 /*
  * iATU Unroll-specific register definitions
  * From 4.80 core version the address translation will be made by unroll
  */
 #define PCIE_ATU_UNR_REGION_CTRL1	0x00
 #define PCIE_ATU_UNR_REGION_CTRL2	0x04
-#define PCIE_ATU_UNR_LOWER_BASE	0x08
-#define PCIE_ATU_UNR_UPPER_BASE	0x0C
+#define PCIE_ATU_UNR_LOWER_BASE		0x08
+#define PCIE_ATU_UNR_UPPER_BASE		0x0C
 #define PCIE_ATU_UNR_LIMIT		0x10
 #define PCIE_ATU_UNR_LOWER_TARGET	0x14
 #define PCIE_ATU_UNR_UPPER_TARGET	0x18
 
+/*
+ * The default address offset between dbi_base and atu_base. Root controller
+ * drivers are not required to initialize atu_base if the offset matches this
+ * default; the driver core automatically derives atu_base from dbi_base using
+ * this offset, if atu_base not set.
+ */
+#define DEFAULT_DBI_ATU_OFFSET (0x3 << 20)
+
 /* Register address builder */
-#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region)  ((0x3 << 20) | (region << 9))
+#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) \
+		((region) << 9)
 
-/* PCIe Port Logic registers */
-#define PLR_OFFSET                     0x700
-#define PCIE_PHY_DEBUG_R1              (PLR_OFFSET + 0x2c)
-#define PCIE_PHY_DEBUG_R1_LINK_UP      (0x1 << 4)
-#define PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING     (0x1 << 29)
+#define PCIE_GET_ATU_INB_UNR_REG_OFFSET(region) \
+		(((region) << 9) | BIT(8))
 
-#define PCIE_MISC_CONTROL_1_OFF		0x8BC
-#define PCIE_DBI_RO_WR_EN		(0x1 << 0)
+#define MAX_MSI_IRQS			256
+#define MAX_MSI_IRQS_PER_CTRL		32
+#define MAX_MSI_CTRLS			(MAX_MSI_IRQS / MAX_MSI_IRQS_PER_CTRL)
+#define MSI_REG_CTRL_BLOCK_SIZE		12
+#define MSI_DEF_NUM_VECTORS		32
 
-/* PCIe Port Logic registers */
-#define PLR_OFFSET                     0x700
-#define PCIE_PHY_DEBUG_R1              (PLR_OFFSET + 0x2c)
-#define PCIE_PHY_DEBUG_R1_LINK_UP      (0x1 << 4)
-#define PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING     (0x1 << 29)
+/* Maximum number of inbound/outbound iATUs */
+#define MAX_IATU_IN			256
+#define MAX_IATU_OUT			256
 
 struct pcie_port;
 struct dw_pcie;
 
+enum dw_pcie_region_type {
+	DW_PCIE_REGION_UNKNOWN,
+	DW_PCIE_REGION_INBOUND,
+	DW_PCIE_REGION_OUTBOUND,
+};
+
 struct dw_pcie_host_ops {
 	int (*rd_own_conf)(struct pcie_port *pp, int where, int size, u32 *val);
 	int (*wr_own_conf)(struct pcie_port *pp, int where, int size, u32 val);
@@ -134,20 +172,23 @@
 };
 
 struct dw_pcie_ops {
-	u32     (*readl_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg,
-			     size_t size);
-	void    (*writel_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg,
-			      size_t size, u32 val);
+	u32     (*read_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg,
+			    size_t size);
+	void    (*write_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg,
+			     size_t size, u32 val);
 	int     (*link_up)(struct dw_pcie *pcie);
 };
 
 struct dw_pcie {
 	struct device_d         *dev;
 	void __iomem            *dbi_base;
+	/* Used when iatu_unroll_enabled is true */
+	void __iomem            *atu_base;
 	u32                     num_viewport;
 	u8                      iatu_unroll_enabled;
 	struct pcie_port        pp;
 	const struct dw_pcie_ops *ops;
+	unsigned int		version;
 };
 
 #define to_dw_pcie_from_pp(port) container_of((port), struct dw_pcie, pp)
@@ -156,26 +197,37 @@
 int dw_pcie_write(void __iomem *addr, int size, u32 val);
 void dw_pcie_setup_rc(struct pcie_port *pp);
 int dw_pcie_host_init(struct pcie_port *pp);
-
-u32 __dw_pcie_readl_dbi(struct dw_pcie *pci, void __iomem *addr, u32 reg,
-			size_t size);
-void __dw_pcie_writel_dbi(struct dw_pcie *pci, void __iomem *addr, u32 reg,
-			  size_t size, u32 val);
+u32 dw_pcie_read_dbi(struct dw_pcie *pci, u32 reg, size_t size);
+void dw_pcie_write_dbi(struct dw_pcie *pci, u32 reg, size_t size, u32 val);
+u32 dw_pcie_read_atu(struct dw_pcie *pci, u32 reg, size_t size);
+void dw_pcie_write_atu(struct dw_pcie *pci, u32 reg, size_t size, u32 val);
 int dw_pcie_link_up(struct dw_pcie *pci);
 int dw_pcie_wait_for_link(struct dw_pcie *pci);
 void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
 			       int type, u64 cpu_addr, u64 pci_addr,
 			       u32 size);
+void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
+			 enum dw_pcie_region_type type);
 void dw_pcie_setup(struct dw_pcie *pci);
 
 static inline void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val)
 {
-	__dw_pcie_writel_dbi(pci, pci->dbi_base, reg, 0x4, val);
+	dw_pcie_write_dbi(pci, reg, 0x4, val);
 }
 
 static inline u32 dw_pcie_readl_dbi(struct dw_pcie *pci, u32 reg)
 {
-	return  __dw_pcie_readl_dbi(pci, pci->dbi_base, reg, 0x4);
+	return dw_pcie_read_dbi(pci, reg, 0x4);
+}
+
+static inline void dw_pcie_writel_atu(struct dw_pcie *pci, u32 reg, u32 val)
+{
+	dw_pcie_write_atu(pci, reg, 0x4, val);
+}
+
+static inline u32 dw_pcie_readl_atu(struct dw_pcie *pci, u32 reg)
+{
+	return dw_pcie_read_atu(pci, reg, 0x4);
 }
 
 static inline void dw_pcie_dbi_ro_wr_en(struct dw_pcie *pci)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 7a411d4..bd02fe2 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -97,6 +97,14 @@
 	help
 	  Say Y here if you are using OMAP extensions to NS16550
 
+config DRIVER_SERIAL_NS16550_PCI
+	depends on DRIVER_SERIAL_NS16550
+	depends on PCI
+	default y
+	bool "NS16550 PCI serial driver"
+	help
+	  Enable this to get support for NS16550 UARTs connected over PCI
+
 config DRIVER_SERIAL_PL010
 	depends on ARCH_EP93XX
 	default y
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 6f9e3b7..8a2abbb 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -9,6 +9,7 @@
 obj-$(CONFIG_DRIVER_SERIAL_MPC5XXX)		+= serial_mpc5xxx.o
 obj-$(CONFIG_DRIVER_SERIAL_CLPS711X)		+= serial_clps711x.o
 obj-$(CONFIG_DRIVER_SERIAL_NS16550)		+= serial_ns16550.o
+obj-$(CONFIG_DRIVER_SERIAL_NS16550_PCI)		+= serial_ns16550_pci.o
 obj-$(CONFIG_DRIVER_SERIAL_PL010)		+= serial_pl010.o
 obj-$(CONFIG_DRIVER_SERIAL_S3C)			+= serial_s3c.o
 obj-$(CONFIG_DRIVER_SERIAL_STM32)		+= serial_stm32.o
diff --git a/drivers/serial/serial_ns16550_pci.c b/drivers/serial/serial_ns16550_pci.c
new file mode 100644
index 0000000..d4b5bd8
--- /dev/null
+++ b/drivers/serial/serial_ns16550_pci.c
@@ -0,0 +1,5311 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Probe module for 8250/16550-type PCI serial ports.
+ *
+ *  Based on Linux drivers/tty/serial/8250_pci.c
+ *  Itself based on Linux drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ *  Copyright (C) 2001 Russell King, All Rights Reserved.
+ *  Copyright (C) 2019 Ahmad Fatoum, Pengutronix
+ */
+
+#include <common.h>
+#include <init.h>
+#include <linux/pci.h>
+#include <driver.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+
+#include <platform_data/serial-ns16550.h>
+#include "serial_ns16550.h"
+
+#define PCI_NUM_BAR_RESOURCES	6
+
+#define FL_BASE_MASK		0x0007
+#define FL_BASE0		0x0000
+#define FL_BASE1		0x0001
+#define FL_BASE2		0x0002
+#define FL_BASE3		0x0003
+#define FL_BASE4		0x0004
+#define FL_GET_BASE(x)		(x & FL_BASE_MASK)
+
+/* Use successive BARs (PCI base address registers),
+   else use offset into some specified BAR */
+#define FL_BASE_BARS		0x0008
+
+/* do not assign an irq; no-op, we use no irqs */
+#define FL_NOIRQ		0x0080
+
+/* Use the Base address register size to cap number of ports */
+#define FL_REGION_SZ_CAP	0x0100
+
+
+struct uart_8250_port {
+	struct NS16550_plat *pdata;
+	struct resource resource;
+
+};
+
+struct pciserial_board {
+	unsigned int flags;
+	unsigned int num_ports;
+	unsigned int base_baud;
+	unsigned int uart_offset;
+	unsigned int reg_shift;
+	unsigned int first_offset;
+};
+
+struct serial_private;
+
+/*
+ * init function returns:
+ *  > 0 - number of ports
+ *  = 0 - use board->num_ports
+ *  < 0 - error
+ */
+struct pci_serial_quirk {
+	u32	vendor;
+	u32	device;
+	u32	subvendor;
+	u32	subdevice;
+	int	(*probe)(struct pci_dev *dev);
+	int	(*init)(struct pci_dev *dev);
+	int	(*setup)(struct serial_private *,
+			 const struct pciserial_board *,
+			 struct uart_8250_port *, int);
+	void	(*exit)(struct pci_dev *dev);
+};
+
+#define PCI_NUM_BAR_RESOURCES	6
+
+struct serial_private {
+	struct pci_dev		*dev;
+	unsigned int		nr;
+	struct pci_serial_quirk	*quirk;
+	const struct pciserial_board *board;
+	void *private_data; /* for use by quirks */
+};
+
+static int pci_default_setup(struct serial_private*,
+	  const struct pciserial_board*, struct uart_8250_port *, int);
+
+static void moan_device(const char *str, struct pci_dev *dev)
+{
+	dev_err(&dev->dev,
+	       "%s: %s\n"
+	       "Please send the output of lspci -vv, this\n"
+	       "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
+	       "manufacturer and name of serial board or\n"
+	       "modem board to <linux-serial@vger.kernel.org>.\n",
+	       dev_name(&dev->dev), str, dev->vendor, dev->device,
+	       dev->subsystem_vendor, dev->subsystem_device);
+}
+
+static int
+setup_port(struct serial_private *priv, struct uart_8250_port *port,
+	   int bar, int offset, int regshift)
+{
+	struct pci_dev *dev = priv->dev;
+
+	if (bar >= PCI_NUM_BAR_RESOURCES)
+		return -EINVAL;
+
+	port->resource.flags = IORESOURCE_MEM_8BIT;
+
+	if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
+		if (!pci_iomap(dev, bar))
+			return -ENOMEM;
+
+		port->resource.flags |= IORESOURCE_MEM;
+	} else {
+		port->resource.flags |= IORESOURCE_IO;
+	}
+
+	port->resource.start = pci_resource_start(dev, bar) + offset;
+	port->resource.end = port->resource.start + pci_resource_len(dev, bar) - 1;
+
+	port->pdata->shift = regshift;
+
+	return 0;
+}
+
+/*
+ * ADDI-DATA GmbH communication cards <info@addi-data.com>
+ */
+static int addidata_apci7800_setup(struct serial_private *priv,
+				const struct pciserial_board *board,
+				struct uart_8250_port *port, int idx)
+{
+	unsigned int bar = 0, offset = board->first_offset;
+	bar = FL_GET_BASE(board->flags);
+
+	if (idx < 2) {
+		offset += idx * board->uart_offset;
+	} else if ((idx >= 2) && (idx < 4)) {
+		bar += 1;
+		offset += ((idx - 2) * board->uart_offset);
+	} else if ((idx >= 4) && (idx < 6)) {
+		bar += 2;
+		offset += ((idx - 4) * board->uart_offset);
+	} else if (idx >= 6) {
+		bar += 3;
+		offset += ((idx - 6) * board->uart_offset);
+	}
+
+	return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
+/*
+ * AFAVLAB uses a different mixture of BARs and offsets
+ * Not that ugly ;) -- HW
+ */
+static int
+afavlab_setup(struct serial_private *priv, const struct pciserial_board *board,
+	      struct uart_8250_port *port, int idx)
+{
+	unsigned int bar, offset = board->first_offset;
+
+	bar = FL_GET_BASE(board->flags);
+	if (idx < 4)
+		bar += idx;
+	else {
+		bar = 4;
+		offset += (idx - 4) * board->uart_offset;
+	}
+
+	return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
+/*
+ * HP's Remote Management Console.  The Diva chip came in several
+ * different versions.  N-class, L2000 and A500 have two Diva chips, each
+ * with 3 UARTs (the third UART on the second chip is unused).  Superdome
+ * and Keystone have one Diva chip with 3 UARTs.  Some later machines have
+ * one Diva chip, but it has been expanded to 5 UARTs.
+ */
+static int pci_hp_diva_init(struct pci_dev *dev)
+{
+	int rc = 0;
+
+	switch (dev->subsystem_device) {
+	case PCI_DEVICE_ID_HP_DIVA_TOSCA1:
+	case PCI_DEVICE_ID_HP_DIVA_HALFDOME:
+	case PCI_DEVICE_ID_HP_DIVA_KEYSTONE:
+	case PCI_DEVICE_ID_HP_DIVA_EVEREST:
+		rc = 3;
+		break;
+	case PCI_DEVICE_ID_HP_DIVA_TOSCA2:
+		rc = 2;
+		break;
+	case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
+		rc = 4;
+		break;
+	case PCI_DEVICE_ID_HP_DIVA_POWERBAR:
+	case PCI_DEVICE_ID_HP_DIVA_HURRICANE:
+		rc = 1;
+		break;
+	}
+
+	return rc;
+}
+
+/*
+ * HP's Diva chip puts the 4th/5th serial port further out, and
+ * some serial ports are supposed to be hidden on certain models.
+ */
+static int
+pci_hp_diva_setup(struct serial_private *priv,
+		const struct pciserial_board *board,
+		struct uart_8250_port *port, int idx)
+{
+	unsigned int offset = board->first_offset;
+	unsigned int bar = FL_GET_BASE(board->flags);
+
+	switch (priv->dev->subsystem_device) {
+	case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
+		if (idx == 3)
+			idx++;
+		break;
+	case PCI_DEVICE_ID_HP_DIVA_EVEREST:
+		if (idx > 0)
+			idx++;
+		if (idx > 2)
+			idx++;
+		break;
+	}
+	if (idx > 2)
+		offset = 0x18;
+
+	offset += idx * board->uart_offset;
+
+	return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
+/*
+ * Added for EKF Intel i960 serial boards
+ */
+static int pci_inteli960ni_init(struct pci_dev *dev)
+{
+	u32 oldval;
+
+	if (!(dev->subsystem_device & 0x1000))
+		return -ENODEV;
+
+	/* is firmware started? */
+	pci_read_config_dword(dev, 0x44, &oldval);
+	if (oldval == 0x00001000L) { /* RESET value */
+		dev_dbg(&dev->dev, "Local i960 firmware missing\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+/*
+ * Some PCI serial cards using the PLX 9050 PCI interface chip require
+ * that the card interrupt be explicitly enabled or disabled.  This
+ * seems to be mainly needed on card using the PLX which also use I/O
+ * mapped memory.
+ */
+static int pci_plx9050_init(struct pci_dev *dev)
+{
+	void __iomem *p;
+
+	if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) {
+		moan_device("no memory in bar 0", dev);
+		return 0;
+	}
+
+	/*
+	 * disable interrupts
+	 */
+	p = pci_iomap(dev, 0);
+	if (p == NULL)
+		return -ENOMEM;
+
+	writel(0, p + 0x4c);
+
+	/*
+	 * Read the register back to ensure that it took effect.
+	 */
+	readl(p + 0x4c);
+
+	return 0;
+}
+
+#define NI8420_INT_ENABLE_REG	0x38
+#define NI8420_INT_ENABLE_BIT	0x2000
+
+/* MITE registers */
+#define MITE_IOWBSR1	0xc4
+#define MITE_IOWCR1	0xf4
+#define MITE_LCIMR1	0x08
+#define MITE_LCIMR2	0x10
+
+#define MITE_LCIMR2_CLR_CPU_IE	(1 << 30)
+
+/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
+static int
+sbs_setup(struct serial_private *priv, const struct pciserial_board *board,
+		struct uart_8250_port *port, int idx)
+{
+	unsigned int bar, offset = board->first_offset;
+
+	bar = 0;
+
+	if (idx < 4) {
+		/* first four channels map to 0, 0x100, 0x200, 0x300 */
+		offset += idx * board->uart_offset;
+	} else if (idx < 8) {
+		/* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */
+		offset += idx * board->uart_offset + 0xC00;
+	} else /* we have only 8 ports on PMC-OCTALPRO */
+		return 1;
+
+	return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
+/*
+* This does initialization for PMC OCTALPRO cards:
+* maps the device memory, resets the UARTs (needed, bc
+* if the module is removed and inserted again, the card
+* is in the sleep mode) and enables global interrupt.
+*/
+
+/* global control register offset for SBS PMC-OctalPro */
+#define OCT_REG_CR_OFF		0x500
+
+static int sbs_init(struct pci_dev *dev)
+{
+	u8 __iomem *p;
+
+	p = pci_iomap(dev, 0);
+
+	if (p == NULL)
+		return -ENOMEM;
+	/* Set bit-4 Control Register (UART RESET) in to reset the uarts */
+	writeb(0x10, p + OCT_REG_CR_OFF);
+	udelay(50);
+	writeb(0x0, p + OCT_REG_CR_OFF);
+
+	/* Clear especially bit-2 (INTENABLE) of Control Register */
+	writeb(0, p + OCT_REG_CR_OFF);
+
+	return 0;
+}
+
+/*
+ * SIIG serial cards have an PCI interface chip which also controls
+ * the UART clocking frequency. Each UART can be clocked independently
+ * (except cards equipped with 4 UARTs) and initial clocking settings
+ * are stored in the EEPROM chip. It can cause problems because this
+ * version of serial driver doesn't support differently clocked UART's
+ * on single PCI card. To prevent this, initialization functions set
+ * high frequency clocking for all UART's on given card. It is safe (I
+ * hope) because it doesn't touch EEPROM settings to prevent conflicts
+ * with other OSes (like M$ DOS).
+ *
+ *  SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999
+ *
+ * There is two family of SIIG serial cards with different PCI
+ * interface chip and different configuration methods:
+ *     - 10x cards have control registers in IO and/or memory space;
+ *     - 20x cards have control registers in standard PCI configuration space.
+ *
+ * Note: all 10x cards have PCI device ids 0x10..
+ *       all 20x cards have PCI device ids 0x20..
+ *
+ * There are also Quartet Serial cards which use Oxford Semiconductor
+ * 16954 quad UART PCI chip clocked by 18.432 MHz quartz.
+ *
+ * Note: some SIIG cards are probed by the parport_serial object.
+ */
+
+#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
+#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
+
+static int pci_siig10x_init(struct pci_dev *dev)
+{
+	u16 data;
+	void __iomem *p;
+
+	switch (dev->device & 0xfff8) {
+	case PCI_DEVICE_ID_SIIG_1S_10x:	/* 1S */
+		data = 0xffdf;
+		break;
+	case PCI_DEVICE_ID_SIIG_2S_10x:	/* 2S, 2S1P */
+		data = 0xf7ff;
+		break;
+	default:			/* 1S1P, 4S */
+		data = 0xfffb;
+		break;
+	}
+
+	p = pci_iomap(dev, 0);
+	if (p == NULL)
+		return -ENOMEM;
+
+	writew(readw(p + 0x28) & data, p + 0x28);
+	readw(p + 0x28);
+
+
+	return 0;
+}
+
+#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
+#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
+
+static int pci_siig20x_init(struct pci_dev *dev)
+{
+	u8 data;
+
+	/* Change clock frequency for the first UART. */
+	pci_read_config_byte(dev, 0x6f, &data);
+	pci_write_config_byte(dev, 0x6f, data & 0xef);
+
+	/* If this card has 2 UART, we have to do the same with second UART. */
+	if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) ||
+	    ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) {
+		pci_read_config_byte(dev, 0x73, &data);
+		pci_write_config_byte(dev, 0x73, data & 0xef);
+	}
+	return 0;
+}
+
+static int pci_siig_init(struct pci_dev *dev)
+{
+	unsigned int type = dev->device & 0xff00;
+
+	if (type == 0x1000)
+		return pci_siig10x_init(dev);
+	else if (type == 0x2000)
+		return pci_siig20x_init(dev);
+
+	moan_device("Unknown SIIG card", dev);
+	return -ENODEV;
+}
+
+static int pci_siig_setup(struct serial_private *priv,
+			  const struct pciserial_board *board,
+			  struct uart_8250_port *port, int idx)
+{
+	unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0;
+
+	if (idx > 3) {
+		bar = 4;
+		offset = (idx - 4) * 8;
+	}
+
+	return setup_port(priv, port, bar, offset, 0);
+}
+
+/*
+ * Timedia has an explosion of boards, and to avoid the PCI table from
+ * growing *huge*, we use this function to collapse some 70 entries
+ * in the PCI table into one, for sanity's and compactness's sake.
+ */
+static const unsigned short timedia_single_port[] = {
+	0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0
+};
+
+static const unsigned short timedia_dual_port[] = {
+	0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
+	0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
+	0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
+	0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
+	0xD079, 0
+};
+
+static const unsigned short timedia_quad_port[] = {
+	0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
+	0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
+	0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
+	0xB157, 0
+};
+
+static const unsigned short timedia_eight_port[] = {
+	0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
+	0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
+};
+
+static const struct timedia_struct {
+	int num;
+	const unsigned short *ids;
+} timedia_data[] = {
+	{ 1, timedia_single_port },
+	{ 2, timedia_dual_port },
+	{ 4, timedia_quad_port },
+	{ 8, timedia_eight_port }
+};
+
+/*
+ * There are nearly 70 different Timedia/SUNIX PCI serial devices.  Instead of
+ * listing them individually, this driver merely grabs them all with
+ * PCI_ANY_ID.  Some of these devices, however, also feature a parallel port,
+ * and should be left free to be claimed by parport_serial instead.
+ */
+static int pci_timedia_probe(struct pci_dev *dev)
+{
+	/*
+	 * Check the third digit of the subdevice ID
+	 * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel)
+	 */
+	if ((dev->subsystem_device & 0x00f0) >= 0x70) {
+		dev_info(&dev->dev,
+			"ignoring Timedia subdevice %04x for parport_serial\n",
+			dev->subsystem_device);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int pci_timedia_init(struct pci_dev *dev)
+{
+	const unsigned short *ids;
+	int i, j;
+
+	for (i = 0; i < ARRAY_SIZE(timedia_data); i++) {
+		ids = timedia_data[i].ids;
+		for (j = 0; ids[j]; j++)
+			if (dev->subsystem_device == ids[j])
+				return timedia_data[i].num;
+	}
+	return 0;
+}
+
+/*
+ * Timedia/SUNIX uses a mixture of BARs and offsets
+ * Ugh, this is ugly as all hell --- TYT
+ */
+static int
+pci_timedia_setup(struct serial_private *priv,
+		  const struct pciserial_board *board,
+		  struct uart_8250_port *port, int idx)
+{
+	unsigned int bar = 0, offset = board->first_offset;
+
+	switch (idx) {
+	case 0:
+		bar = 0;
+		break;
+	case 1:
+		offset = board->uart_offset;
+		bar = 0;
+		break;
+	case 2:
+		bar = 1;
+		break;
+	case 3:
+		offset = board->uart_offset;
+		/* FALLTHROUGH */
+	case 4: /* BAR 2 */
+	case 5: /* BAR 3 */
+	case 6: /* BAR 4 */
+	case 7: /* BAR 5 */
+		bar = idx - 2;
+	}
+
+	return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
+/*
+ * Some Titan cards are also a little weird
+ */
+static int
+titan_400l_800l_setup(struct serial_private *priv,
+		      const struct pciserial_board *board,
+		      struct uart_8250_port *port, int idx)
+{
+	unsigned int bar, offset = board->first_offset;
+
+	switch (idx) {
+	case 0:
+		bar = 1;
+		break;
+	case 1:
+		bar = 2;
+		break;
+	default:
+		bar = 4;
+		offset = (idx - 2) * board->uart_offset;
+	}
+
+	return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
+static int pci_xircom_init(struct pci_dev *dev)
+{
+	mdelay(100);
+	return 0;
+}
+
+static int pci_ni8420_init(struct pci_dev *dev)
+{
+	void __iomem *p;
+	unsigned int bar = 0;
+
+	if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
+		moan_device("no memory in bar", dev);
+		return 0;
+	}
+
+	p = pci_iomap(dev, bar);
+	if (p == NULL)
+		return -ENOMEM;
+
+	/* Disable the CPU Interrupt */
+	writel(readl(p + NI8420_INT_ENABLE_REG) & ~(NI8420_INT_ENABLE_BIT),
+	       p + NI8420_INT_ENABLE_REG);
+
+	return 0;
+}
+
+static int pci_ni8430_init(struct pci_dev *dev)
+{
+	return -ENOSYS;
+}
+
+/* UART Port Control Register */
+#define NI16550_PCR_OFFSET	0x0f
+#define NI16550_PCR_RS422	0x00
+#define NI16550_PCR_ECHO_RS485	0x01
+#define NI16550_PCR_DTR_RS485	0x02
+#define NI16550_PCR_AUTO_RS485	0x03
+#define NI16550_PCR_WIRE_MODE_MASK	0x03
+#define NI16550_PCR_TXVR_ENABLE_BIT	BIT(3)
+#define NI16550_PCR_RS485_TERMINATION_BIT	BIT(6)
+#define NI16550_ACR_DTR_AUTO_DTR	(0x2 << 3)
+#define NI16550_ACR_DTR_MANUAL_DTR	(0x0 << 3)
+
+static int
+pci_ni8430_setup(struct serial_private *priv,
+		 const struct pciserial_board *board,
+		 struct uart_8250_port *port, int idx)
+{
+	struct pci_dev *dev = priv->dev;
+	void __iomem *p;
+	unsigned int bar, offset = board->first_offset;
+
+	if (idx >= board->num_ports)
+		return 1;
+
+	bar = FL_GET_BASE(board->flags);
+	offset += idx * board->uart_offset;
+
+	p = pci_iomap(dev, bar);
+	if (!p)
+		return -ENOMEM;
+
+	/* enable the transceiver */
+	writeb(readb(p + offset + NI16550_PCR_OFFSET) | NI16550_PCR_TXVR_ENABLE_BIT,
+	       p + offset + NI16550_PCR_OFFSET);
+
+	return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
+static int pci_ni8431_setup(struct serial_private *priv,
+		 const struct pciserial_board *board,
+		 struct uart_8250_port *uart, int idx)
+{
+	return -ENOSYS;
+}
+
+static int pci_netmos_9900_setup(struct serial_private *priv,
+				const struct pciserial_board *board,
+				struct uart_8250_port *port, int idx)
+{
+	unsigned int bar;
+
+	if ((priv->dev->device != PCI_DEVICE_ID_NETMOS_9865) &&
+	    (priv->dev->subsystem_device & 0xff00) == 0x3000) {
+		/* netmos apparently orders BARs by datasheet layout, so serial
+		 * ports get BARs 0 and 3 (or 1 and 4 for memmapped)
+		 */
+		bar = 3 * idx;
+
+		return setup_port(priv, port, bar, 0, board->reg_shift);
+	} else {
+		return pci_default_setup(priv, board, port, idx);
+	}
+}
+
+/* the 99xx series comes with a range of device IDs and a variety
+ * of capabilities:
+ *
+ * 9900 has varying capabilities and can cascade to sub-controllers
+ *   (cascading should be purely internal)
+ * 9904 is hardwired with 4 serial ports
+ * 9912 and 9922 are hardwired with 2 serial ports
+ */
+static int pci_netmos_9900_numports(struct pci_dev *dev)
+{
+	unsigned int c = dev->class;
+	unsigned int pi;
+	unsigned short sub_serports;
+
+	pi = c & 0xff;
+
+	if (pi == 2)
+		return 1;
+
+	if ((pi == 0) && (dev->device == PCI_DEVICE_ID_NETMOS_9900)) {
+		/* two possibilities: 0x30ps encodes number of parallel and
+		 * serial ports, or 0x1000 indicates *something*. This is not
+		 * immediately obvious, since the 2s1p+4s configuration seems
+		 * to offer all functionality on functions 0..2, while still
+		 * advertising the same function 3 as the 4s+2s1p config.
+		 */
+		sub_serports = dev->subsystem_device & 0xf;
+		if (sub_serports > 0)
+			return sub_serports;
+
+		dev_err(&dev->dev,
+			"NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
+		return 0;
+	}
+
+	moan_device("unknown NetMos/Mostech program interface", dev);
+	return 0;
+}
+
+static int pci_netmos_init(struct pci_dev *dev)
+{
+	/* subdevice 0x00PS means <P> parallel, <S> serial */
+	unsigned int num_serial = dev->subsystem_device & 0xf;
+
+	if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) ||
+		(dev->device == PCI_DEVICE_ID_NETMOS_9865))
+		return 0;
+
+	if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
+			dev->subsystem_device == 0x0299)
+		return 0;
+
+	switch (dev->device) { /* FALLTHROUGH on all */
+	case PCI_DEVICE_ID_NETMOS_9904:
+	case PCI_DEVICE_ID_NETMOS_9912:
+	case PCI_DEVICE_ID_NETMOS_9922:
+	case PCI_DEVICE_ID_NETMOS_9900:
+		num_serial = pci_netmos_9900_numports(dev);
+		break;
+
+	default:
+		break;
+	}
+
+	if (num_serial == 0) {
+		moan_device("unknown NetMos/Mostech device", dev);
+		return -ENODEV;
+	}
+
+	return num_serial;
+}
+
+/*
+ * These chips are available with optionally one parallel port and up to
+ * two serial ports. Unfortunately they all have the same product id.
+ *
+ * Basic configuration is done over a region of 32 I/O ports. The base
+ * ioport is called INTA or INTC, depending on docs/other drivers.
+ *
+ * The region of the 32 I/O ports is configured in POSIO0R...
+ */
+
+/* registers */
+#define ITE_887x_MISCR		0x9c
+#define ITE_887x_INTCBAR	0x78
+#define ITE_887x_UARTBAR	0x7c
+#define ITE_887x_PS0BAR		0x10
+#define ITE_887x_POSIO0		0x60
+
+/* I/O space size */
+#define ITE_887x_IOSIZE		32
+/* I/O space size (bits 26-24; 8 bytes = 011b) */
+#define ITE_887x_POSIO_IOSIZE_8		(3 << 24)
+/* I/O space size (bits 26-24; 32 bytes = 101b) */
+#define ITE_887x_POSIO_IOSIZE_32	(5 << 24)
+/* Decoding speed (1 = slow, 2 = medium, 3 = fast) */
+#define ITE_887x_POSIO_SPEED		(3 << 29)
+/* enable IO_Space bit */
+#define ITE_887x_POSIO_ENABLE		(1 << 31)
+
+static int pci_ite887x_init(struct pci_dev *dev)
+{
+	struct serial_private *priv;
+	/* inta_addr are the configuration addresses of the ITE */
+	static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0,
+							0x200, 0x280, 0 };
+	int ret, i, type;
+	struct resource *iobase = NULL;
+	u32 miscr, uartbar, ioport;
+
+	/* search for the base-ioport */
+	i = 0;
+	while (inta_addr[i] && iobase == NULL) {
+		iobase = request_ioport_region("ite887x",
+					       inta_addr[i],
+					       inta_addr[i] + ITE_887x_IOSIZE - 1);
+		if (!IS_ERR(iobase)) {
+			/* write POSIO0R - speed | size | ioport */
+			pci_write_config_dword(dev, ITE_887x_POSIO0,
+				ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
+				ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]);
+			/* write INTCBAR - ioport */
+			pci_write_config_dword(dev, ITE_887x_INTCBAR,
+								inta_addr[i]);
+			ret = inb(inta_addr[i]);
+			if (ret != 0xff) {
+				/* ioport connected */
+				break;
+			}
+			release_region(iobase);
+			iobase = NULL;
+		}
+		i++;
+	}
+
+	if (!inta_addr[i]) {
+		dev_err(&dev->dev, "ite887x: could not find iobase\n");
+		return -ENODEV;
+	}
+
+	/* start of undocumented type checking (see parport_pc.c) */
+	type = inb(iobase->start + 0x18) & 0x0f;
+
+	switch (type) {
+	case 0x2:	/* ITE8871 (1P) */
+	case 0xa:	/* ITE8875 (1P) */
+		ret = 0;
+		break;
+	case 0xe:	/* ITE8872 (2S1P) */
+		ret = 2;
+		break;
+	case 0x6:	/* ITE8873 (1S) */
+		ret = 1;
+		break;
+	case 0x8:	/* ITE8874 (2S) */
+		ret = 2;
+		break;
+	default:
+		moan_device("Unknown ITE887x", dev);
+		ret = -ENODEV;
+	}
+
+	/* configure all serial ports */
+	for (i = 0; i < ret; i++) {
+		/* read the I/O port from the device */
+		pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)),
+								&ioport);
+		ioport &= 0x0000FF00;	/* the actual base address */
+		pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)),
+			ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
+			ITE_887x_POSIO_IOSIZE_8 | ioport);
+
+		/* write the ioport to the UARTBAR */
+		pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar);
+		uartbar &= ~(0xffff << (16 * i));	/* clear half the reg */
+		uartbar |= (ioport << (16 * i));	/* set the ioport */
+		pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar);
+
+		/* get current config */
+		pci_read_config_dword(dev, ITE_887x_MISCR, &miscr);
+		/* disable interrupts (UARTx_Routing[3:0]) */
+		miscr &= ~(0xf << (12 - 4 * i));
+		/* activate the UART (UARTx_En) */
+		miscr |= 1 << (23 - i);
+		/* write new config with activated UART */
+		pci_write_config_dword(dev, ITE_887x_MISCR, miscr);
+	}
+
+	if (ret <= 0) {
+		/* the device has no UARTs if we get here */
+		release_region(iobase);
+	}
+
+	priv = dev->dev.priv;
+	priv->private_data = iobase;
+
+	return ret;
+}
+
+static void pci_ite887x_exit(struct pci_dev *dev)
+{
+	struct serial_private *priv;
+	u32 ioport;
+	/* the ioport is bit 0-15 in POSIO0R */
+	pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport);
+	ioport &= 0xffff;
+
+	priv = dev->dev.priv;
+	if (priv->private_data)
+		release_region(priv->private_data);
+}
+
+/*
+ * EndRun Technologies.
+ * Determine the number of ports available on the device.
+ */
+#define PCI_VENDOR_ID_ENDRUN			0x7401
+#define PCI_DEVICE_ID_ENDRUN_1588	0xe100
+
+static int pci_endrun_init(struct pci_dev *dev)
+{
+	u8 __iomem *p;
+	unsigned long deviceID;
+	unsigned int  number_uarts = 0;
+
+	/* EndRun device is all 0xexxx */
+	if (dev->vendor == PCI_VENDOR_ID_ENDRUN &&
+		(dev->device & 0xf000) != 0xe000)
+		return 0;
+
+	p = pci_iomap(dev, 0);
+	if (p == NULL)
+		return -ENOMEM;
+
+	deviceID = ioread32(p);
+	/* EndRun device */
+	if (deviceID == 0x07000200) {
+		number_uarts = ioread8(p + 4);
+		dev_dbg(&dev->dev,
+			"%d ports detected on EndRun PCI Express device\n",
+			number_uarts);
+	}
+
+	return number_uarts;
+}
+
+/*
+ * Oxford Semiconductor Inc.
+ * Check that device is part of the Tornado range of devices, then determine
+ * the number of ports available on the device.
+ */
+static int pci_oxsemi_tornado_init(struct pci_dev *dev)
+{
+	u8 __iomem *p;
+	unsigned long deviceID;
+	unsigned int  number_uarts = 0;
+
+	/* OxSemi Tornado devices are all 0xCxxx */
+	if (dev->vendor == PCI_VENDOR_ID_OXSEMI &&
+	    (dev->device & 0xF000) != 0xC000)
+		return 0;
+
+	p = pci_iomap(dev, 0);
+	if (p == NULL)
+		return -ENOMEM;
+
+	deviceID = ioread32(p);
+	/* Tornado device */
+	if (deviceID == 0x07000200) {
+		number_uarts = ioread8(p + 4);
+		dev_dbg(&dev->dev,
+			"%d ports detected on Oxford PCI Express device\n",
+			number_uarts);
+	}
+
+	return number_uarts;
+}
+
+static int pci_asix_setup(struct serial_private *priv,
+		  const struct pciserial_board *board,
+		  struct uart_8250_port *port, int idx)
+{
+	return -ENOSYS;
+}
+
+/* Quatech devices have their own extra interface features */
+
+struct quatech_feature {
+	u16 devid;
+	bool amcc;
+};
+
+#define QPCR_TEST_FOR1		0x3F
+#define QPCR_TEST_GET1		0x00
+#define QPCR_TEST_FOR2		0x40
+#define QPCR_TEST_GET2		0x40
+#define QPCR_TEST_FOR3		0x80
+#define QPCR_TEST_GET3		0x40
+#define QPCR_TEST_FOR4		0xC0
+#define QPCR_TEST_GET4		0x80
+
+#define QOPR_CLOCK_X1		0x0000
+#define QOPR_CLOCK_X2		0x0001
+#define QOPR_CLOCK_X4		0x0002
+#define QOPR_CLOCK_X8		0x0003
+#define QOPR_CLOCK_RATE_MASK	0x0003
+
+
+static struct quatech_feature quatech_cards[] = {
+	{ PCI_DEVICE_ID_QUATECH_QSC100,   1 },
+	{ PCI_DEVICE_ID_QUATECH_DSC100,   1 },
+	{ PCI_DEVICE_ID_QUATECH_DSC100E,  0 },
+	{ PCI_DEVICE_ID_QUATECH_DSC200,   1 },
+	{ PCI_DEVICE_ID_QUATECH_DSC200E,  0 },
+	{ PCI_DEVICE_ID_QUATECH_ESC100D,  1 },
+	{ PCI_DEVICE_ID_QUATECH_ESC100M,  1 },
+	{ PCI_DEVICE_ID_QUATECH_QSCP100,  1 },
+	{ PCI_DEVICE_ID_QUATECH_DSCP100,  1 },
+	{ PCI_DEVICE_ID_QUATECH_QSCP200,  1 },
+	{ PCI_DEVICE_ID_QUATECH_DSCP200,  1 },
+	{ PCI_DEVICE_ID_QUATECH_ESCLP100, 0 },
+	{ PCI_DEVICE_ID_QUATECH_QSCLP100, 0 },
+	{ PCI_DEVICE_ID_QUATECH_DSCLP100, 0 },
+	{ PCI_DEVICE_ID_QUATECH_SSCLP100, 0 },
+	{ PCI_DEVICE_ID_QUATECH_QSCLP200, 0 },
+	{ PCI_DEVICE_ID_QUATECH_DSCLP200, 0 },
+	{ PCI_DEVICE_ID_QUATECH_SSCLP200, 0 },
+	{ PCI_DEVICE_ID_QUATECH_SPPXP_100, 0 },
+	{ 0, }
+};
+
+static int pci_quatech_amcc(u16 devid)
+{
+	struct quatech_feature *qf = &quatech_cards[0];
+	while (qf->devid) {
+		if (qf->devid == devid)
+			return qf->amcc;
+		qf++;
+	}
+	pr_err("quatech: unknown port type '0x%04X'.\n", devid);
+	return 0;
+};
+
+static int pci_quatech_rqopr(struct uart_8250_port *port)
+{
+	unsigned long base = port->resource.start;
+	u8 LCR, val;
+
+	LCR = inb(base + lcr);
+	outb(0xBF, base + lcr);
+	val = inb(base + scr);
+	outb(LCR, base + lcr);
+	return val;
+}
+
+static void pci_quatech_wqopr(struct uart_8250_port *port, u8 qopr)
+{
+	unsigned long base = port->resource.start;
+	u8 LCR;
+
+	LCR = inb(base + lcr);
+	outb(0xBF, base + lcr);
+	inb(base + scr);
+	outb(qopr, base + scr);
+	outb(LCR, base + lcr);
+}
+
+static int pci_quatech_rqmcr(struct uart_8250_port *port)
+{
+	unsigned long base = port->resource.start;
+	u8 LCR, val, qmcr;
+
+	LCR = inb(base + lcr);
+	outb(0xBF, base + lcr);
+	val = inb(base + scr);
+	outb(val | 0x10, base + scr);
+	qmcr = inb(base + mcr);
+	outb(val, base + scr);
+	outb(LCR, base + lcr);
+
+	return qmcr;
+}
+
+static void pci_quatech_wqmcr(struct uart_8250_port *port, u8 qmcr)
+{
+	unsigned long base = port->resource.start;
+	u8 LCR, val;
+
+	LCR = inb(base + lcr);
+	outb(0xBF, base + lcr);
+	val = inb(base + scr);
+	outb(val | 0x10, base + scr);
+	outb(qmcr, base + mcr);
+	outb(val, base + scr);
+	outb(LCR, base + lcr);
+}
+
+static int pci_quatech_has_qmcr(struct uart_8250_port *port)
+{
+	unsigned long base = port->resource.start;
+	u8 LCR, val;
+
+	LCR = inb(base + lcr);
+	outb(0xBF, base + lcr);
+	val = inb(base + scr);
+	if (val & 0x20) {
+		outb(0x80, lcr);
+		if (!(inb(scr) & 0x20)) {
+			outb(LCR, base + lcr);
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static int pci_quatech_test(struct uart_8250_port *port)
+{
+	u8 reg, qopr;
+
+	qopr = pci_quatech_rqopr(port);
+	pci_quatech_wqopr(port, qopr & QPCR_TEST_FOR1);
+	reg = pci_quatech_rqopr(port) & 0xC0;
+	if (reg != QPCR_TEST_GET1)
+		return -EINVAL;
+	pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR2);
+	reg = pci_quatech_rqopr(port) & 0xC0;
+	if (reg != QPCR_TEST_GET2)
+		return -EINVAL;
+	pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR3);
+	reg = pci_quatech_rqopr(port) & 0xC0;
+	if (reg != QPCR_TEST_GET3)
+		return -EINVAL;
+	pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR4);
+	reg = pci_quatech_rqopr(port) & 0xC0;
+	if (reg != QPCR_TEST_GET4)
+		return -EINVAL;
+
+	pci_quatech_wqopr(port, qopr);
+	return 0;
+}
+
+static int pci_quatech_clock(struct uart_8250_port *port)
+{
+	u8 qopr, reg, set;
+	unsigned long clock;
+
+	if (pci_quatech_test(port) < 0)
+		return 1843200;
+
+	qopr = pci_quatech_rqopr(port);
+
+	pci_quatech_wqopr(port, qopr & ~QOPR_CLOCK_X8);
+	reg = pci_quatech_rqopr(port);
+	if (reg & QOPR_CLOCK_X8) {
+		clock = 1843200;
+		goto out;
+	}
+	pci_quatech_wqopr(port, qopr | QOPR_CLOCK_X8);
+	reg = pci_quatech_rqopr(port);
+	if (!(reg & QOPR_CLOCK_X8)) {
+		clock = 1843200;
+		goto out;
+	}
+	reg &= QOPR_CLOCK_X8;
+	if (reg == QOPR_CLOCK_X2) {
+		clock =  3685400;
+		set = QOPR_CLOCK_X2;
+	} else if (reg == QOPR_CLOCK_X4) {
+		clock = 7372800;
+		set = QOPR_CLOCK_X4;
+	} else if (reg == QOPR_CLOCK_X8) {
+		clock = 14745600;
+		set = QOPR_CLOCK_X8;
+	} else {
+		clock = 1843200;
+		set = QOPR_CLOCK_X1;
+	}
+	qopr &= ~QOPR_CLOCK_RATE_MASK;
+	qopr |= set;
+
+out:
+	pci_quatech_wqopr(port, qopr);
+	return clock;
+}
+
+static int pci_quatech_rs422(struct uart_8250_port *port)
+{
+	u8 qmcr;
+	int rs422 = 0;
+
+	if (!pci_quatech_has_qmcr(port))
+		return 0;
+	qmcr = pci_quatech_rqmcr(port);
+	pci_quatech_wqmcr(port, 0xFF);
+	if (pci_quatech_rqmcr(port))
+		rs422 = 1;
+	pci_quatech_wqmcr(port, qmcr);
+	return rs422;
+}
+
+static int pci_quatech_init(struct pci_dev *dev)
+{
+	if (pci_quatech_amcc(dev->device)) {
+		unsigned long base = pci_resource_start(dev, 0);
+		if (base) {
+			u32 tmp;
+
+			outl(inl(base + 0x38) | 0x00002000, base + 0x38);
+			tmp = inl(base + 0x3c);
+			outl(tmp | 0x01000000, base + 0x3c);
+			outl(tmp &= ~0x01000000, base + 0x3c);
+		}
+	}
+	return 0;
+}
+
+static int pci_quatech_setup(struct serial_private *priv,
+		  const struct pciserial_board *board,
+		  struct uart_8250_port *port, int idx)
+{
+	/* Needed by pci_quatech calls below */
+	port->resource.start = pci_resource_start(priv->dev, FL_GET_BASE(board->flags));
+	/* Set up the clocking */
+	port->pdata->clock = pci_quatech_clock(port);
+	/* For now just warn about RS422 */
+	if (pci_quatech_rs422(port))
+		pr_warn("quatech: software control of RS422 features not currently supported.\n");
+	return pci_default_setup(priv, board, port, idx);
+}
+
+static int pci_default_setup(struct serial_private *priv,
+		  const struct pciserial_board *board,
+		  struct uart_8250_port *port, int idx)
+{
+	unsigned int bar, offset = board->first_offset, maxnr;
+
+	bar = FL_GET_BASE(board->flags);
+	if (board->flags & FL_BASE_BARS)
+		bar += idx;
+	else
+		offset += idx * board->uart_offset;
+
+	maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
+		(board->reg_shift + 3);
+
+	if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
+		return 1;
+
+	return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+static int pci_pericom_setup(struct serial_private *priv,
+		  const struct pciserial_board *board,
+		  struct uart_8250_port *port, int idx)
+{
+	return -ENOSYS;
+}
+
+static int pci_pericom_setup_four_at_eight(struct serial_private *priv,
+		  const struct pciserial_board *board,
+		  struct uart_8250_port *port, int idx)
+{
+	return -ENOSYS;
+}
+
+static int
+ce4100_serial_setup(struct serial_private *priv,
+		  const struct pciserial_board *board,
+		  struct uart_8250_port *port, int idx)
+{
+	return -ENOSYS;
+}
+
+static int
+pci_omegapci_setup(struct serial_private *priv,
+		      const struct pciserial_board *board,
+		      struct uart_8250_port *port, int idx)
+{
+	return setup_port(priv, port, 2, idx * 8, 0);
+}
+
+static int
+pci_brcm_trumanage_setup(struct serial_private *priv,
+			 const struct pciserial_board *board,
+			 struct uart_8250_port *port, int idx)
+{
+	return -ENOSYS;
+}
+
+/* RTS will control by MCR if this bit is 0 */
+#define FINTEK_RTS_CONTROL_BY_HW	BIT(4)
+/* only worked with FINTEK_RTS_CONTROL_BY_HW on */
+#define FINTEK_RTS_INVERT		BIT(5)
+
+static int pci_fintek_setup(struct serial_private *priv,
+			    const struct pciserial_board *board,
+			    struct uart_8250_port *port, int idx)
+{
+	struct pci_dev *pdev = priv->dev;
+	u8 config_base;
+	u16 iobase;
+
+	config_base = 0x40 + 0x08 * idx;
+
+	/* Get the io address from configuration space */
+	pci_read_config_word(pdev, config_base + 4, &iobase);
+
+	dev_dbg(&pdev->dev, "%s: idx=%d iobase=0x%x", __func__, idx, iobase);
+
+	port->resource.flags = IORESOURCE_IO;
+	port->resource.start = iobase;
+	port->resource.end  = iobase + 8 - 1;
+
+	return 0;
+}
+
+static int pci_fintek_init(struct pci_dev *dev)
+{
+	unsigned long iobase;
+	u32 max_port, i;
+	resource_size_t bar_data[3];
+	u8 config_base;
+
+	if (!(pci_resource_flags(dev, 5) & IORESOURCE_IO) ||
+			!(pci_resource_flags(dev, 4) & IORESOURCE_IO) ||
+			!(pci_resource_flags(dev, 3) & IORESOURCE_IO))
+		return -ENODEV;
+
+	switch (dev->device) {
+	case 0x1104: /* 4 ports */
+	case 0x1108: /* 8 ports */
+		max_port = dev->device & 0xff;
+		break;
+	case 0x1112: /* 12 ports */
+		max_port = 12;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Get the io address dispatch from the BIOS */
+	bar_data[0] = pci_resource_start(dev, 5);
+	bar_data[1] = pci_resource_start(dev, 4);
+	bar_data[2] = pci_resource_start(dev, 3);
+
+	for (i = 0; i < max_port; ++i) {
+		/* UART0 configuration offset start from 0x40 */
+		config_base = 0x40 + 0x08 * i;
+
+		/* Calculate Real IO Port */
+		iobase = (bar_data[i / 4] & 0xffffffe0) + (i % 4) * 8;
+
+		/* Enable UART I/O port */
+		pci_write_config_byte(dev, config_base + 0x00, 0x01);
+
+		/* Select 128-byte FIFO and 8x FIFO threshold */
+		pci_write_config_byte(dev, config_base + 0x01, 0x33);
+
+		/* LSB UART */
+		pci_write_config_byte(dev, config_base + 0x04,
+				(u8)(iobase & 0xff));
+
+		/* MSB UART */
+		pci_write_config_byte(dev, config_base + 0x05,
+				(u8)((iobase & 0xff00) >> 8));
+
+		/* First init without port data
+		 * force init to RS232 Mode
+		 */
+		pci_write_config_byte(dev, config_base + 0x07, 0x01);
+	}
+
+	return max_port;
+}
+
+static int pci_fintek_f815xxa_setup(struct serial_private *priv,
+			    const struct pciserial_board *board,
+			    struct uart_8250_port *port, int idx)
+{
+	return -ENOSYS;
+}
+
+static int pci_fintek_f815xxa_init(struct pci_dev *dev)
+{
+	u32 max_port, i;
+	int config_base;
+
+	if (!(pci_resource_flags(dev, 0) & IORESOURCE_MEM))
+		return -ENODEV;
+
+	switch (dev->device) {
+	case 0x1204: /* 4 ports */
+	case 0x1208: /* 8 ports */
+		max_port = dev->device & 0xff;
+		break;
+	case 0x1212: /* 12 ports */
+		max_port = 12;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Set to mmio decode */
+	pci_write_config_byte(dev, 0x209, 0x40);
+
+	for (i = 0; i < max_port; ++i) {
+		/* UART0 configuration offset start from 0x2A0 */
+		config_base = 0x2A0 + 0x08 * i;
+
+		/* Select 128-byte FIFO and 8x FIFO threshold */
+		pci_write_config_byte(dev, config_base + 0x01, 0x33);
+
+		/* Enable UART I/O port */
+		pci_write_config_byte(dev, config_base + 0, 0x01);
+	}
+
+	return max_port;
+}
+
+static int skip_tx_en_setup(struct serial_private *priv,
+			const struct pciserial_board *board,
+			struct uart_8250_port *port, int idx)
+{
+	return -ENOSYS;
+}
+
+static int kt_serial_setup(struct serial_private *priv,
+			   const struct pciserial_board *board,
+			   struct uart_8250_port *port, int idx)
+{
+	return -ENOSYS;
+}
+
+static int
+pci_wch_ch353_setup(struct serial_private *priv,
+		    const struct pciserial_board *board,
+		    struct uart_8250_port *port, int idx)
+{
+	return -ENOSYS;
+}
+
+static int
+pci_wch_ch355_setup(struct serial_private *priv,
+		const struct pciserial_board *board,
+		struct uart_8250_port *port, int idx)
+{
+	return -ENOSYS;
+}
+
+static int
+pci_wch_ch38x_setup(struct serial_private *priv,
+		    const struct pciserial_board *board,
+		    struct uart_8250_port *port, int idx)
+{
+	return -ENOSYS;
+}
+
+static int
+pci_sunix_setup(struct serial_private *priv,
+		const struct pciserial_board *board,
+		struct uart_8250_port *port, int idx)
+{
+	return -ENOSYS;
+}
+
+static int
+pci_moxa_setup(struct serial_private *priv,
+		const struct pciserial_board *board,
+		struct uart_8250_port *port, int idx)
+{
+	unsigned int bar = FL_GET_BASE(board->flags);
+	int offset;
+
+	if (board->num_ports == 4 && idx == 3)
+		offset = 7 * board->uart_offset;
+	else
+		offset = idx * board->uart_offset;
+
+	return setup_port(priv, port, bar, offset, 0);
+}
+
+#define PCI_VENDOR_ID_SBSMODULARIO	0x124B
+#define PCI_SUBVENDOR_ID_SBSMODULARIO	0x124B
+#define PCI_DEVICE_ID_OCTPRO		0x0001
+#define PCI_SUBDEVICE_ID_OCTPRO232	0x0108
+#define PCI_SUBDEVICE_ID_OCTPRO422	0x0208
+#define PCI_SUBDEVICE_ID_POCTAL232	0x0308
+#define PCI_SUBDEVICE_ID_POCTAL422	0x0408
+#define PCI_SUBDEVICE_ID_SIIG_DUAL_00	0x2500
+#define PCI_SUBDEVICE_ID_SIIG_DUAL_30	0x2530
+#define PCI_VENDOR_ID_ADVANTECH		0x13fe
+#define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66
+#define PCI_DEVICE_ID_ADVANTECH_PCI3620	0x3620
+#define PCI_DEVICE_ID_ADVANTECH_PCI3618	0x3618
+#define PCI_DEVICE_ID_ADVANTECH_PCIf618	0xf618
+#define PCI_DEVICE_ID_TITAN_200I	0x8028
+#define PCI_DEVICE_ID_TITAN_400I	0x8048
+#define PCI_DEVICE_ID_TITAN_800I	0x8088
+#define PCI_DEVICE_ID_TITAN_800EH	0xA007
+#define PCI_DEVICE_ID_TITAN_800EHB	0xA008
+#define PCI_DEVICE_ID_TITAN_400EH	0xA009
+#define PCI_DEVICE_ID_TITAN_100E	0xA010
+#define PCI_DEVICE_ID_TITAN_200E	0xA012
+#define PCI_DEVICE_ID_TITAN_400E	0xA013
+#define PCI_DEVICE_ID_TITAN_800E	0xA014
+#define PCI_DEVICE_ID_TITAN_200EI	0xA016
+#define PCI_DEVICE_ID_TITAN_200EISI	0xA017
+#define PCI_DEVICE_ID_TITAN_200V3	0xA306
+#define PCI_DEVICE_ID_TITAN_400V3	0xA310
+#define PCI_DEVICE_ID_TITAN_410V3	0xA312
+#define PCI_DEVICE_ID_TITAN_800V3	0xA314
+#define PCI_DEVICE_ID_TITAN_800V3B	0xA315
+#define PCI_DEVICE_ID_OXSEMI_16PCI958	0x9538
+#define PCIE_DEVICE_ID_NEO_2_OX_IBM	0x00F6
+#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA	0xc001
+#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
+#define PCI_VENDOR_ID_WCH		0x4348
+#define PCI_DEVICE_ID_WCH_CH352_2S	0x3253
+#define PCI_DEVICE_ID_WCH_CH353_4S	0x3453
+#define PCI_DEVICE_ID_WCH_CH353_2S1PF	0x5046
+#define PCI_DEVICE_ID_WCH_CH353_1S1P	0x5053
+#define PCI_DEVICE_ID_WCH_CH353_2S1P	0x7053
+#define PCI_DEVICE_ID_WCH_CH355_4S	0x7173
+#define PCI_VENDOR_ID_AGESTAR		0x5372
+#define PCI_DEVICE_ID_AGESTAR_9375	0x6872
+#define PCI_VENDOR_ID_ASIX		0x9710
+#define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
+#define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e
+
+#define PCIE_VENDOR_ID_WCH		0x1c00
+#define PCIE_DEVICE_ID_WCH_CH382_2S1P	0x3250
+#define PCIE_DEVICE_ID_WCH_CH384_4S	0x3470
+#define PCIE_DEVICE_ID_WCH_CH382_2S	0x3253
+
+#define PCI_VENDOR_ID_PERICOM			0x12D8
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7951	0x7951
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7952	0x7952
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7954	0x7954
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7958	0x7958
+
+#define PCI_VENDOR_ID_ACCESIO			0x494f
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB	0x1051
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S	0x1053
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB	0x105C
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S	0x105E
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB	0x1091
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2	0x1093
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB	0x1099
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4	0x109B
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB	0x10D1
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM	0x10D3
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB	0x10DA
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM	0x10DC
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1	0x1108
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2	0x1110
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2	0x1111
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4	0x1118
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4	0x1119
+#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S	0x1152
+#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S	0x115A
+#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2	0x1190
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2	0x1191
+#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4	0x1198
+#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4	0x1199
+#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM	0x11D0
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4	0x105A
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4	0x105B
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8	0x106A
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM485_8	0x106B
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4	0x1098
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8	0x10A9
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM	0x10D9
+#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM	0x10E9
+#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM	0x11D8
+
+#define PCIE_DEVICE_ID_NI_PXIE8430_2328	0x74C2
+#define PCIE_DEVICE_ID_NI_PXIE8430_23216	0x74C1
+#define PCI_DEVICE_ID_NI_PXI8431_4852	0x7081
+#define PCI_DEVICE_ID_NI_PXI8431_4854	0x70DE
+#define PCI_DEVICE_ID_NI_PXI8431_4858	0x70E3
+#define PCI_DEVICE_ID_NI_PXI8433_4852	0x70E9
+#define PCI_DEVICE_ID_NI_PXI8433_4854	0x70ED
+#define PCIE_DEVICE_ID_NI_PXIE8431_4858	0x74C4
+#define PCIE_DEVICE_ID_NI_PXIE8431_48516	0x74C3
+
+#define	PCI_DEVICE_ID_MOXA_CP102E	0x1024
+#define	PCI_DEVICE_ID_MOXA_CP102EL	0x1025
+#define	PCI_DEVICE_ID_MOXA_CP104EL_A	0x1045
+#define	PCI_DEVICE_ID_MOXA_CP114EL	0x1144
+#define	PCI_DEVICE_ID_MOXA_CP116E_A_A	0x1160
+#define	PCI_DEVICE_ID_MOXA_CP116E_A_B	0x1161
+#define	PCI_DEVICE_ID_MOXA_CP118EL_A	0x1182
+#define	PCI_DEVICE_ID_MOXA_CP118E_A_I	0x1183
+#define	PCI_DEVICE_ID_MOXA_CP132EL	0x1322
+#define	PCI_DEVICE_ID_MOXA_CP134EL_A	0x1342
+#define	PCI_DEVICE_ID_MOXA_CP138E_A	0x1381
+#define	PCI_DEVICE_ID_MOXA_CP168EL_A	0x1683
+
+/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
+#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
+#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588	0x1588
+
+/*
+ * Master list of serial port init/setup/exit quirks.
+ * This does not describe the general nature of the port.
+ * (ie, baud base, number and location of ports, etc)
+ *
+ * This list is ordered alphabetically by vendor then device.
+ * Specific entries must come before more generic entries.
+ */
+static struct pci_serial_quirk pci_serial_quirks[] = {
+	/*
+	* ADDI-DATA GmbH communication cards <info@addi-data.com>
+	*/
+	{
+		.vendor         = PCI_VENDOR_ID_AMCC,
+		.device         = PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup          = addidata_apci7800_setup,
+	},
+	/*
+	 * AFAVLAB cards - these may be called via parport_serial
+	 *  It is not clear whether this applies to all products.
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_AFAVLAB,
+		.device		= PCI_ANY_ID,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= afavlab_setup,
+	},
+	/*
+	 * HP Diva
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_HP,
+		.device		= PCI_DEVICE_ID_HP_DIVA,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_hp_diva_init,
+		.setup		= pci_hp_diva_setup,
+	},
+	/*
+	 * Intel
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_80960_RP,
+		.subvendor	= 0xe4bf,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_inteli960ni_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_8257X_SOL,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= skip_tx_en_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_82573L_SOL,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= skip_tx_en_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_82573E_SOL,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= skip_tx_en_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_CE4100_UART,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= ce4100_serial_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_PATSBURG_KT,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= kt_serial_setup,
+	},
+	/*
+	 * ITE
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_ITE,
+		.device		= PCI_DEVICE_ID_ITE_8872,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ite887x_init,
+		.setup		= pci_default_setup,
+		.exit		= pci_ite887x_exit,
+	},
+	/*
+	 * National Instruments
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCI_DEVICE_ID_NI_PCI23216,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8420_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCI_DEVICE_ID_NI_PCI2328,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8420_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCI_DEVICE_ID_NI_PCI2324,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8420_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCI_DEVICE_ID_NI_PCI2322,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8420_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCI_DEVICE_ID_NI_PCI2324I,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8420_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCI_DEVICE_ID_NI_PCI2322I,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8420_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCI_DEVICE_ID_NI_PXI8420_23216,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8420_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCI_DEVICE_ID_NI_PXI8420_2328,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8420_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCI_DEVICE_ID_NI_PXI8420_2324,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8420_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCI_DEVICE_ID_NI_PXI8420_2322,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8420_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCI_DEVICE_ID_NI_PXI8422_2324,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8420_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCI_DEVICE_ID_NI_PXI8422_2322,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8420_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCI_ANY_ID,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8430_init,
+		.setup		= pci_ni8430_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCIE_DEVICE_ID_NI_PXIE8430_2328,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8430_init,
+		.setup		= pci_ni8430_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCIE_DEVICE_ID_NI_PXIE8430_23216,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8430_init,
+		.setup		= pci_ni8430_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCI_DEVICE_ID_NI_PXI8431_4852,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8430_init,
+		.setup		= pci_ni8431_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCI_DEVICE_ID_NI_PXI8431_4854,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8430_init,
+		.setup		= pci_ni8431_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCI_DEVICE_ID_NI_PXI8431_4858,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8430_init,
+		.setup		= pci_ni8431_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCI_DEVICE_ID_NI_PXI8433_4852,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8430_init,
+		.setup		= pci_ni8431_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCI_DEVICE_ID_NI_PXI8433_4854,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8430_init,
+		.setup		= pci_ni8431_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCIE_DEVICE_ID_NI_PXIE8431_4858,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8430_init,
+		.setup		= pci_ni8431_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_NI,
+		.device		= PCIE_DEVICE_ID_NI_PXIE8431_48516,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ni8430_init,
+		.setup		= pci_ni8431_setup,
+	},
+	/* Quatech */
+	{
+		.vendor		= PCI_VENDOR_ID_QUATECH,
+		.device		= PCI_ANY_ID,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_quatech_init,
+		.setup		= pci_quatech_setup,
+	},
+	/*
+	 * Panacom
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_PANACOM,
+		.device		= PCI_DEVICE_ID_PANACOM_QUADMODEM,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_plx9050_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_PANACOM,
+		.device		= PCI_DEVICE_ID_PANACOM_DUALMODEM,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_plx9050_init,
+		.setup		= pci_default_setup,
+	},
+	/*
+	 * Pericom (Only 7954 - It have a offset jump for port 4)
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_PERICOM,
+		.device		= PCI_DEVICE_ID_PERICOM_PI7C9X7954,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_pericom_setup_four_at_eight,
+	},
+	/*
+	 * PLX
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_PLX,
+		.device		= PCI_DEVICE_ID_PLX_9050,
+		.subvendor	= PCI_SUBVENDOR_ID_EXSYS,
+		.subdevice	= PCI_SUBDEVICE_ID_EXSYS_4055,
+		.init		= pci_plx9050_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_PLX,
+		.device		= PCI_DEVICE_ID_PLX_9050,
+		.subvendor	= PCI_SUBVENDOR_ID_KEYSPAN,
+		.subdevice	= PCI_SUBDEVICE_ID_KEYSPAN_SX2,
+		.init		= pci_plx9050_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_PLX,
+		.device		= PCI_DEVICE_ID_PLX_ROMULUS,
+		.subvendor	= PCI_VENDOR_ID_PLX,
+		.subdevice	= PCI_DEVICE_ID_PLX_ROMULUS,
+		.init		= pci_plx9050_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup_four_at_eight,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup_four_at_eight,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup_four_at_eight,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup_four_at_eight,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup_four_at_eight,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup_four_at_eight,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup_four_at_eight,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup_four_at_eight,
+	},
+	{
+		.vendor     = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup_four_at_eight,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup_four_at_eight,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup_four_at_eight,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup_four_at_eight,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup_four_at_eight,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup_four_at_eight,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup_four_at_eight,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_ANY_ID,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup,
+	},	/*
+	 * SBS Technologies, Inc., PMC-OCTALPRO 232
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_SBSMODULARIO,
+		.device		= PCI_DEVICE_ID_OCTPRO,
+		.subvendor	= PCI_SUBVENDOR_ID_SBSMODULARIO,
+		.subdevice	= PCI_SUBDEVICE_ID_OCTPRO232,
+		.init		= sbs_init,
+		.setup		= sbs_setup,
+	},
+	/*
+	 * SBS Technologies, Inc., PMC-OCTALPRO 422
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_SBSMODULARIO,
+		.device		= PCI_DEVICE_ID_OCTPRO,
+		.subvendor	= PCI_SUBVENDOR_ID_SBSMODULARIO,
+		.subdevice	= PCI_SUBDEVICE_ID_OCTPRO422,
+		.init		= sbs_init,
+		.setup		= sbs_setup,
+	},
+	/*
+	 * SBS Technologies, Inc., P-Octal 232
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_SBSMODULARIO,
+		.device		= PCI_DEVICE_ID_OCTPRO,
+		.subvendor	= PCI_SUBVENDOR_ID_SBSMODULARIO,
+		.subdevice	= PCI_SUBDEVICE_ID_POCTAL232,
+		.init		= sbs_init,
+		.setup		= sbs_setup,
+	},
+	/*
+	 * SBS Technologies, Inc., P-Octal 422
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_SBSMODULARIO,
+		.device		= PCI_DEVICE_ID_OCTPRO,
+		.subvendor	= PCI_SUBVENDOR_ID_SBSMODULARIO,
+		.subdevice	= PCI_SUBDEVICE_ID_POCTAL422,
+		.init		= sbs_init,
+		.setup		= sbs_setup,
+	},
+	/*
+	 * SIIG cards - these may be called via parport_serial
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_SIIG,
+		.device		= PCI_ANY_ID,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_siig_init,
+		.setup		= pci_siig_setup,
+	},
+	/*
+	 * Titan cards
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_TITAN,
+		.device		= PCI_DEVICE_ID_TITAN_400L,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= titan_400l_800l_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_TITAN,
+		.device		= PCI_DEVICE_ID_TITAN_800L,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= titan_400l_800l_setup,
+	},
+	/*
+	 * Timedia cards
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_TIMEDIA,
+		.device		= PCI_DEVICE_ID_TIMEDIA_1889,
+		.subvendor	= PCI_VENDOR_ID_TIMEDIA,
+		.subdevice	= PCI_ANY_ID,
+		.probe		= pci_timedia_probe,
+		.init		= pci_timedia_init,
+		.setup		= pci_timedia_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_TIMEDIA,
+		.device		= PCI_ANY_ID,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_timedia_setup,
+	},
+	/*
+	 * Sunix PCI serial boards
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_SUNIX,
+		.device		= PCI_DEVICE_ID_SUNIX_1999,
+		.subvendor	= PCI_VENDOR_ID_SUNIX,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_sunix_setup,
+	},
+	/*
+	 * Xircom cards
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_XIRCOM,
+		.device		= PCI_DEVICE_ID_XIRCOM_X3201_MDM,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_xircom_init,
+		.setup		= pci_default_setup,
+	},
+	/*
+	 * Netmos cards - these may be called via parport_serial
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_NETMOS,
+		.device		= PCI_ANY_ID,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_netmos_init,
+		.setup		= pci_netmos_9900_setup,
+	},
+	/*
+	 * EndRun Technologies
+	*/
+	{
+		.vendor		= PCI_VENDOR_ID_ENDRUN,
+		.device		= PCI_ANY_ID,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_endrun_init,
+		.setup		= pci_default_setup,
+	},
+	/*
+	 * For Oxford Semiconductor Tornado based devices
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_OXSEMI,
+		.device		= PCI_ANY_ID,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_MAINPINE,
+		.device		= PCI_ANY_ID,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_DIGI,
+		.device		= PCIE_DEVICE_ID_NEO_2_OX_IBM,
+		.subvendor		= PCI_SUBVENDOR_ID_IBM,
+		.subdevice		= PCI_ANY_ID,
+		.init			= pci_oxsemi_tornado_init,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor         = PCI_VENDOR_ID_INTEL,
+		.device         = 0x8811,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor         = PCI_VENDOR_ID_INTEL,
+		.device         = 0x8812,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor         = PCI_VENDOR_ID_INTEL,
+		.device         = 0x8813,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor         = PCI_VENDOR_ID_INTEL,
+		.device         = 0x8814,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor         = 0x10DB,
+		.device         = 0x8027,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor         = 0x10DB,
+		.device         = 0x8028,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor         = 0x10DB,
+		.device         = 0x8029,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor         = 0x10DB,
+		.device         = 0x800C,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_default_setup,
+	},
+	{
+		.vendor         = 0x10DB,
+		.device         = 0x800D,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_default_setup,
+	},
+	/*
+	 * Cronyx Omega PCI (PLX-chip based)
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_PLX,
+		.device		= PCI_DEVICE_ID_PLX_CRONYX_OMEGA,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_omegapci_setup,
+	},
+	/* WCH CH353 1S1P card (16550 clone) */
+	{
+		.vendor         = PCI_VENDOR_ID_WCH,
+		.device         = PCI_DEVICE_ID_WCH_CH353_1S1P,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup          = pci_wch_ch353_setup,
+	},
+	/* WCH CH353 2S1P card (16550 clone) */
+	{
+		.vendor         = PCI_VENDOR_ID_WCH,
+		.device         = PCI_DEVICE_ID_WCH_CH353_2S1P,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup          = pci_wch_ch353_setup,
+	},
+	/* WCH CH353 4S card (16550 clone) */
+	{
+		.vendor         = PCI_VENDOR_ID_WCH,
+		.device         = PCI_DEVICE_ID_WCH_CH353_4S,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup          = pci_wch_ch353_setup,
+	},
+	/* WCH CH353 2S1PF card (16550 clone) */
+	{
+		.vendor         = PCI_VENDOR_ID_WCH,
+		.device         = PCI_DEVICE_ID_WCH_CH353_2S1PF,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup          = pci_wch_ch353_setup,
+	},
+	/* WCH CH352 2S card (16550 clone) */
+	{
+		.vendor		= PCI_VENDOR_ID_WCH,
+		.device		= PCI_DEVICE_ID_WCH_CH352_2S,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_wch_ch353_setup,
+	},
+	/* WCH CH355 4S card (16550 clone) */
+	{
+		.vendor		= PCI_VENDOR_ID_WCH,
+		.device		= PCI_DEVICE_ID_WCH_CH355_4S,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_wch_ch355_setup,
+	},
+	/* WCH CH382 2S card (16850 clone) */
+	{
+		.vendor         = PCIE_VENDOR_ID_WCH,
+		.device         = PCIE_DEVICE_ID_WCH_CH382_2S,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup          = pci_wch_ch38x_setup,
+	},
+	/* WCH CH382 2S1P card (16850 clone) */
+	{
+		.vendor         = PCIE_VENDOR_ID_WCH,
+		.device         = PCIE_DEVICE_ID_WCH_CH382_2S1P,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup          = pci_wch_ch38x_setup,
+	},
+	/* WCH CH384 4S card (16850 clone) */
+	{
+		.vendor         = PCIE_VENDOR_ID_WCH,
+		.device         = PCIE_DEVICE_ID_WCH_CH384_4S,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup          = pci_wch_ch38x_setup,
+	},
+	/*
+	 * ASIX devices with FIFO bug
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_ASIX,
+		.device		= PCI_ANY_ID,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_asix_setup,
+	},
+	/*
+	 * Broadcom TruManage (NetXtreme)
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_BROADCOM,
+		.device		= PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_brcm_trumanage_setup,
+	},
+	{
+		.vendor		= 0x1c29,
+		.device		= 0x1104,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_fintek_setup,
+		.init		= pci_fintek_init,
+	},
+	{
+		.vendor		= 0x1c29,
+		.device		= 0x1108,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_fintek_setup,
+		.init		= pci_fintek_init,
+	},
+	{
+		.vendor		= 0x1c29,
+		.device		= 0x1112,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_fintek_setup,
+		.init		= pci_fintek_init,
+	},
+	/*
+	 * MOXA
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_MOXA,
+		.device		= PCI_ANY_ID,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_moxa_setup,
+	},
+	{
+		.vendor		= 0x1c29,
+		.device		= 0x1204,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_fintek_f815xxa_setup,
+		.init		= pci_fintek_f815xxa_init,
+	},
+	{
+		.vendor		= 0x1c29,
+		.device		= 0x1208,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_fintek_f815xxa_setup,
+		.init		= pci_fintek_f815xxa_init,
+	},
+	{
+		.vendor		= 0x1c29,
+		.device		= 0x1212,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_fintek_f815xxa_setup,
+		.init		= pci_fintek_f815xxa_init,
+	},
+
+	/*
+	 * Default "match everything" terminator entry
+	 */
+	{
+		.vendor		= PCI_ANY_ID,
+		.device		= PCI_ANY_ID,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_default_setup,
+	}
+};
+
+static inline int quirk_id_matches(u32 quirk_id, u32 dev_id)
+{
+	return quirk_id == PCI_ANY_ID || quirk_id == dev_id;
+}
+
+static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
+{
+	struct pci_serial_quirk *quirk;
+
+	for (quirk = pci_serial_quirks; ; quirk++)
+		if (quirk_id_matches(quirk->vendor, dev->vendor) &&
+		    quirk_id_matches(quirk->device, dev->device) &&
+		    quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) &&
+		    quirk_id_matches(quirk->subdevice, dev->subsystem_device))
+			break;
+	return quirk;
+}
+
+/*
+ * This is the configuration table for all of the PCI serial boards
+ * which we support.  It is directly indexed by the pci_board_num_t enum
+ * value, which is encoded in the pci_device_id PCI probe table's
+ * driver_data member.
+ *
+ * The makeup of these names are:
+ *  pbn_bn{_bt}_n_baud{_offsetinhex}
+ *
+ *  bn		= PCI BAR number
+ *  bt		= Index using PCI BARs
+ *  n		= number of serial ports
+ *  baud	= baud rate
+ *  offsetinhex	= offset for each sequential port (in hex)
+ *
+ * This table is sorted by (in order): bn, bt, baud, offsetindex, n.
+ *
+ * Please note: in theory if n = 1, _bt infix should make no difference.
+ * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200
+ */
+enum pci_board_num_t {
+	pbn_default = 0,
+
+	pbn_b0_1_115200,
+	pbn_b0_2_115200,
+	pbn_b0_4_115200,
+	pbn_b0_5_115200,
+	pbn_b0_8_115200,
+
+	pbn_b0_1_921600,
+	pbn_b0_2_921600,
+	pbn_b0_4_921600,
+
+	pbn_b0_2_1130000,
+
+	pbn_b0_4_1152000,
+
+	pbn_b0_4_1250000,
+
+	pbn_b0_2_1843200,
+	pbn_b0_4_1843200,
+
+	pbn_b0_1_4000000,
+
+	pbn_b0_bt_1_115200,
+	pbn_b0_bt_2_115200,
+	pbn_b0_bt_4_115200,
+	pbn_b0_bt_8_115200,
+
+	pbn_b0_bt_1_460800,
+	pbn_b0_bt_2_460800,
+	pbn_b0_bt_4_460800,
+
+	pbn_b0_bt_1_921600,
+	pbn_b0_bt_2_921600,
+	pbn_b0_bt_4_921600,
+	pbn_b0_bt_8_921600,
+
+	pbn_b1_1_115200,
+	pbn_b1_2_115200,
+	pbn_b1_4_115200,
+	pbn_b1_8_115200,
+	pbn_b1_16_115200,
+
+	pbn_b1_1_921600,
+	pbn_b1_2_921600,
+	pbn_b1_4_921600,
+	pbn_b1_8_921600,
+
+	pbn_b1_2_1250000,
+
+	pbn_b1_bt_1_115200,
+	pbn_b1_bt_2_115200,
+	pbn_b1_bt_4_115200,
+
+	pbn_b1_bt_2_921600,
+
+	pbn_b1_1_1382400,
+	pbn_b1_2_1382400,
+	pbn_b1_4_1382400,
+	pbn_b1_8_1382400,
+
+	pbn_b2_1_115200,
+	pbn_b2_2_115200,
+	pbn_b2_4_115200,
+	pbn_b2_8_115200,
+
+	pbn_b2_1_460800,
+	pbn_b2_4_460800,
+	pbn_b2_8_460800,
+	pbn_b2_16_460800,
+
+	pbn_b2_1_921600,
+	pbn_b2_4_921600,
+	pbn_b2_8_921600,
+
+	pbn_b2_8_1152000,
+
+	pbn_b2_bt_1_115200,
+	pbn_b2_bt_2_115200,
+	pbn_b2_bt_4_115200,
+
+	pbn_b2_bt_2_921600,
+	pbn_b2_bt_4_921600,
+
+	pbn_b3_2_115200,
+	pbn_b3_4_115200,
+	pbn_b3_8_115200,
+
+	pbn_b4_bt_2_921600,
+	pbn_b4_bt_4_921600,
+	pbn_b4_bt_8_921600,
+
+	/*
+	 * Board-specific versions.
+	 */
+	pbn_panacom,
+	pbn_panacom2,
+	pbn_panacom4,
+	pbn_plx_romulus,
+	pbn_endrun_2_4000000,
+	pbn_oxsemi,
+	pbn_oxsemi_1_4000000,
+	pbn_oxsemi_2_4000000,
+	pbn_oxsemi_4_4000000,
+	pbn_oxsemi_8_4000000,
+	pbn_intel_i960,
+	pbn_sgi_ioc3,
+	pbn_computone_4,
+	pbn_computone_6,
+	pbn_computone_8,
+	pbn_sbsxrsio,
+	pbn_pasemi_1682M,
+	pbn_ni8430_2,
+	pbn_ni8430_4,
+	pbn_ni8430_8,
+	pbn_ni8430_16,
+	pbn_ni8430_pxie_8,
+	pbn_ni8430_pxie_16,
+	pbn_ni8431_2,
+	pbn_ni8431_4,
+	pbn_ni8431_8,
+	pbn_ni8431_pxie_8,
+	pbn_ni8431_pxie_16,
+	pbn_ADDIDATA_PCIe_1_3906250,
+	pbn_ADDIDATA_PCIe_2_3906250,
+	pbn_ADDIDATA_PCIe_4_3906250,
+	pbn_ADDIDATA_PCIe_8_3906250,
+	pbn_ce4100_1_115200,
+	pbn_omegapci,
+	pbn_NETMOS9900_2s_115200,
+	pbn_brcm_trumanage,
+	pbn_fintek_4,
+	pbn_fintek_8,
+	pbn_fintek_12,
+	pbn_fintek_F81504A,
+	pbn_fintek_F81508A,
+	pbn_fintek_F81512A,
+	pbn_wch382_2,
+	pbn_wch384_4,
+	pbn_pericom_PI7C9X7951,
+	pbn_pericom_PI7C9X7952,
+	pbn_pericom_PI7C9X7954,
+	pbn_pericom_PI7C9X7958,
+	pbn_sunix_pci_1s,
+	pbn_sunix_pci_2s,
+	pbn_sunix_pci_4s,
+	pbn_sunix_pci_8s,
+	pbn_sunix_pci_16s,
+	pbn_moxa8250_2p,
+	pbn_moxa8250_4p,
+	pbn_moxa8250_8p,
+};
+
+/*
+ * uart_offset - the space between channels
+ * reg_shift   - describes how the UART registers are mapped
+ *               to PCI memory by the card.
+ * For example IER register on SBS, Inc. PMC-OctPro is located at
+ * offset 0x10 from the UART base, while UART_IER is defined as 1
+ * in include/linux/serial_reg.h,
+ * see first lines of serial_in() and serial_out() in 8250.c
+*/
+
+static struct pciserial_board pci_boards[] = {
+	[pbn_default] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b0_1_115200] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b0_2_115200] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b0_4_115200] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 4,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b0_5_115200] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 5,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b0_8_115200] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 8,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b0_1_921600] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b0_2_921600] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b0_4_921600] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 4,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+
+	[pbn_b0_2_1130000] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 2,
+		.base_baud      = 1130000,
+		.uart_offset    = 8,
+	},
+
+	[pbn_b0_4_1152000] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 4,
+		.base_baud	= 1152000,
+		.uart_offset	= 8,
+	},
+
+	[pbn_b0_4_1250000] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 4,
+		.base_baud	= 1250000,
+		.uart_offset	= 8,
+	},
+
+	[pbn_b0_2_1843200] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 1843200,
+		.uart_offset	= 8,
+	},
+	[pbn_b0_4_1843200] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 4,
+		.base_baud	= 1843200,
+		.uart_offset	= 8,
+	},
+
+	[pbn_b0_1_4000000] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 4000000,
+		.uart_offset	= 8,
+	},
+
+	[pbn_b0_bt_1_115200] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b0_bt_2_115200] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 2,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b0_bt_4_115200] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 4,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b0_bt_8_115200] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 8,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+
+	[pbn_b0_bt_1_460800] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 460800,
+		.uart_offset	= 8,
+	},
+	[pbn_b0_bt_2_460800] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 2,
+		.base_baud	= 460800,
+		.uart_offset	= 8,
+	},
+	[pbn_b0_bt_4_460800] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 4,
+		.base_baud	= 460800,
+		.uart_offset	= 8,
+	},
+
+	[pbn_b0_bt_1_921600] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b0_bt_2_921600] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 2,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b0_bt_4_921600] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 4,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b0_bt_8_921600] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 8,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+
+	[pbn_b1_1_115200] = {
+		.flags		= FL_BASE1,
+		.num_ports	= 1,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b1_2_115200] = {
+		.flags		= FL_BASE1,
+		.num_ports	= 2,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b1_4_115200] = {
+		.flags		= FL_BASE1,
+		.num_ports	= 4,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b1_8_115200] = {
+		.flags		= FL_BASE1,
+		.num_ports	= 8,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b1_16_115200] = {
+		.flags		= FL_BASE1,
+		.num_ports	= 16,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+
+	[pbn_b1_1_921600] = {
+		.flags		= FL_BASE1,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b1_2_921600] = {
+		.flags		= FL_BASE1,
+		.num_ports	= 2,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b1_4_921600] = {
+		.flags		= FL_BASE1,
+		.num_ports	= 4,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b1_8_921600] = {
+		.flags		= FL_BASE1,
+		.num_ports	= 8,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b1_2_1250000] = {
+		.flags		= FL_BASE1,
+		.num_ports	= 2,
+		.base_baud	= 1250000,
+		.uart_offset	= 8,
+	},
+
+	[pbn_b1_bt_1_115200] = {
+		.flags		= FL_BASE1|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b1_bt_2_115200] = {
+		.flags		= FL_BASE1|FL_BASE_BARS,
+		.num_ports	= 2,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b1_bt_4_115200] = {
+		.flags		= FL_BASE1|FL_BASE_BARS,
+		.num_ports	= 4,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+
+	[pbn_b1_bt_2_921600] = {
+		.flags		= FL_BASE1|FL_BASE_BARS,
+		.num_ports	= 2,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+
+	[pbn_b1_1_1382400] = {
+		.flags		= FL_BASE1,
+		.num_ports	= 1,
+		.base_baud	= 1382400,
+		.uart_offset	= 8,
+	},
+	[pbn_b1_2_1382400] = {
+		.flags		= FL_BASE1,
+		.num_ports	= 2,
+		.base_baud	= 1382400,
+		.uart_offset	= 8,
+	},
+	[pbn_b1_4_1382400] = {
+		.flags		= FL_BASE1,
+		.num_ports	= 4,
+		.base_baud	= 1382400,
+		.uart_offset	= 8,
+	},
+	[pbn_b1_8_1382400] = {
+		.flags		= FL_BASE1,
+		.num_ports	= 8,
+		.base_baud	= 1382400,
+		.uart_offset	= 8,
+	},
+
+	[pbn_b2_1_115200] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 1,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b2_2_115200] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 2,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b2_4_115200] = {
+		.flags          = FL_BASE2,
+		.num_ports      = 4,
+		.base_baud      = 115200,
+		.uart_offset    = 8,
+	},
+	[pbn_b2_8_115200] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 8,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+
+	[pbn_b2_1_460800] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 1,
+		.base_baud	= 460800,
+		.uart_offset	= 8,
+	},
+	[pbn_b2_4_460800] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 4,
+		.base_baud	= 460800,
+		.uart_offset	= 8,
+	},
+	[pbn_b2_8_460800] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 8,
+		.base_baud	= 460800,
+		.uart_offset	= 8,
+	},
+	[pbn_b2_16_460800] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 16,
+		.base_baud	= 460800,
+		.uart_offset	= 8,
+	 },
+
+	[pbn_b2_1_921600] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b2_4_921600] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 4,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b2_8_921600] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 8,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+
+	[pbn_b2_8_1152000] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 8,
+		.base_baud	= 1152000,
+		.uart_offset	= 8,
+	},
+
+	[pbn_b2_bt_1_115200] = {
+		.flags		= FL_BASE2|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b2_bt_2_115200] = {
+		.flags		= FL_BASE2|FL_BASE_BARS,
+		.num_ports	= 2,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b2_bt_4_115200] = {
+		.flags		= FL_BASE2|FL_BASE_BARS,
+		.num_ports	= 4,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+
+	[pbn_b2_bt_2_921600] = {
+		.flags		= FL_BASE2|FL_BASE_BARS,
+		.num_ports	= 2,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b2_bt_4_921600] = {
+		.flags		= FL_BASE2|FL_BASE_BARS,
+		.num_ports	= 4,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+
+	[pbn_b3_2_115200] = {
+		.flags		= FL_BASE3,
+		.num_ports	= 2,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b3_4_115200] = {
+		.flags		= FL_BASE3,
+		.num_ports	= 4,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_b3_8_115200] = {
+		.flags		= FL_BASE3,
+		.num_ports	= 8,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+
+	[pbn_b4_bt_2_921600] = {
+		.flags		= FL_BASE4,
+		.num_ports	= 2,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b4_bt_4_921600] = {
+		.flags		= FL_BASE4,
+		.num_ports	= 4,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b4_bt_8_921600] = {
+		.flags		= FL_BASE4,
+		.num_ports	= 8,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+
+	/*
+	 * Entries following this are board-specific.
+	 */
+
+	/*
+	 * Panacom - IOMEM
+	 */
+	[pbn_panacom] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 2,
+		.base_baud	= 921600,
+		.uart_offset	= 0x400,
+		.reg_shift	= 7,
+	},
+	[pbn_panacom2] = {
+		.flags		= FL_BASE2|FL_BASE_BARS,
+		.num_ports	= 2,
+		.base_baud	= 921600,
+		.uart_offset	= 0x400,
+		.reg_shift	= 7,
+	},
+	[pbn_panacom4] = {
+		.flags		= FL_BASE2|FL_BASE_BARS,
+		.num_ports	= 4,
+		.base_baud	= 921600,
+		.uart_offset	= 0x400,
+		.reg_shift	= 7,
+	},
+
+	/* I think this entry is broken - the first_offset looks wrong --rmk */
+	[pbn_plx_romulus] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 4,
+		.base_baud	= 921600,
+		.uart_offset	= 8 << 2,
+		.reg_shift	= 2,
+		.first_offset	= 0x03,
+	},
+
+	/*
+	 * EndRun Technologies
+	* Uses the size of PCI Base region 0 to
+	* signal now many ports are available
+	* 2 port 952 Uart support
+	*/
+	[pbn_endrun_2_4000000] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 4000000,
+		.uart_offset	= 0x200,
+		.first_offset	= 0x1000,
+	},
+
+	/*
+	 * This board uses the size of PCI Base region 0 to
+	 * signal now many ports are available
+	 */
+	[pbn_oxsemi] = {
+		.flags		= FL_BASE0|FL_REGION_SZ_CAP,
+		.num_ports	= 32,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[pbn_oxsemi_1_4000000] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 4000000,
+		.uart_offset	= 0x200,
+		.first_offset	= 0x1000,
+	},
+	[pbn_oxsemi_2_4000000] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 4000000,
+		.uart_offset	= 0x200,
+		.first_offset	= 0x1000,
+	},
+	[pbn_oxsemi_4_4000000] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 4,
+		.base_baud	= 4000000,
+		.uart_offset	= 0x200,
+		.first_offset	= 0x1000,
+	},
+	[pbn_oxsemi_8_4000000] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 8,
+		.base_baud	= 4000000,
+		.uart_offset	= 0x200,
+		.first_offset	= 0x1000,
+	},
+
+
+	/*
+	 * EKF addition for i960 Boards form EKF with serial port.
+	 * Max 256 ports.
+	 */
+	[pbn_intel_i960] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 32,
+		.base_baud	= 921600,
+		.uart_offset	= 8 << 2,
+		.reg_shift	= 2,
+		.first_offset	= 0x10000,
+	},
+	[pbn_sgi_ioc3] = {
+		.flags		= FL_BASE0|FL_NOIRQ,
+		.num_ports	= 1,
+		.base_baud	= 458333,
+		.uart_offset	= 8,
+		.reg_shift	= 0,
+		.first_offset	= 0x20178,
+	},
+
+	/*
+	 * Computone - uses IOMEM.
+	 */
+	[pbn_computone_4] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 4,
+		.base_baud	= 921600,
+		.uart_offset	= 0x40,
+		.reg_shift	= 2,
+		.first_offset	= 0x200,
+	},
+	[pbn_computone_6] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 6,
+		.base_baud	= 921600,
+		.uart_offset	= 0x40,
+		.reg_shift	= 2,
+		.first_offset	= 0x200,
+	},
+	[pbn_computone_8] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 8,
+		.base_baud	= 921600,
+		.uart_offset	= 0x40,
+		.reg_shift	= 2,
+		.first_offset	= 0x200,
+	},
+	[pbn_sbsxrsio] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 8,
+		.base_baud	= 460800,
+		.uart_offset	= 256,
+		.reg_shift	= 4,
+	},
+	/*
+	 * PA Semi PWRficient PA6T-1682M on-chip UART
+	 */
+	[pbn_pasemi_1682M] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 8333333,
+	},
+	/*
+	 * National Instruments 843x
+	 */
+	[pbn_ni8430_16] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 16,
+		.base_baud	= 3686400,
+		.uart_offset	= 0x10,
+		.first_offset	= 0x800,
+	},
+	[pbn_ni8430_8] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 8,
+		.base_baud	= 3686400,
+		.uart_offset	= 0x10,
+		.first_offset	= 0x800,
+	},
+	[pbn_ni8430_4] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 4,
+		.base_baud	= 3686400,
+		.uart_offset	= 0x10,
+		.first_offset	= 0x800,
+	},
+	[pbn_ni8430_2] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 3686400,
+		.uart_offset	= 0x10,
+		.first_offset	= 0x800,
+	},
+	[pbn_ni8430_pxie_16] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 16,
+		.base_baud	= 3125000,
+		.uart_offset	= 0x10,
+		.first_offset	= 0x800,
+	},
+	[pbn_ni8430_pxie_8] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 8,
+		.base_baud	= 3125000,
+		.uart_offset	= 0x10,
+		.first_offset	= 0x800,
+	},
+	[pbn_ni8431_8] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 8,
+		.base_baud	= 3686400,
+		.uart_offset	= 0x10,
+		.first_offset	= 0x800,
+	},
+	[pbn_ni8431_4] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 4,
+		.base_baud	= 3686400,
+		.uart_offset	= 0x10,
+		.first_offset	= 0x800,
+	},
+	[pbn_ni8431_2] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 3686400,
+		.uart_offset	= 0x10,
+		.first_offset	= 0x800,
+	},
+	[pbn_ni8431_pxie_16] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 16,
+		.base_baud	= 3125000,
+		.uart_offset	= 0x10,
+		.first_offset	= 0x800,
+	},
+	[pbn_ni8431_pxie_8] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 8,
+		.base_baud	= 3125000,
+		.uart_offset	= 0x10,
+		.first_offset	= 0x800,
+	},
+	/*
+	 * ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com>
+	 */
+	[pbn_ADDIDATA_PCIe_1_3906250] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 3906250,
+		.uart_offset	= 0x200,
+		.first_offset	= 0x1000,
+	},
+	[pbn_ADDIDATA_PCIe_2_3906250] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 3906250,
+		.uart_offset	= 0x200,
+		.first_offset	= 0x1000,
+	},
+	[pbn_ADDIDATA_PCIe_4_3906250] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 4,
+		.base_baud	= 3906250,
+		.uart_offset	= 0x200,
+		.first_offset	= 0x1000,
+	},
+	[pbn_ADDIDATA_PCIe_8_3906250] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 8,
+		.base_baud	= 3906250,
+		.uart_offset	= 0x200,
+		.first_offset	= 0x1000,
+	},
+	[pbn_ce4100_1_115200] = {
+		.flags		= FL_BASE_BARS,
+		.num_ports	= 2,
+		.base_baud	= 921600,
+		.reg_shift      = 2,
+	},
+	[pbn_omegapci] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 8,
+		.base_baud	= 115200,
+		.uart_offset	= 0x200,
+	},
+	[pbn_NETMOS9900_2s_115200] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 115200,
+	},
+	[pbn_brcm_trumanage] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.reg_shift	= 2,
+		.base_baud	= 115200,
+	},
+	[pbn_fintek_4] = {
+		.num_ports	= 4,
+		.uart_offset	= 8,
+		.base_baud	= 115200,
+		.first_offset	= 0x40,
+	},
+	[pbn_fintek_8] = {
+		.num_ports	= 8,
+		.uart_offset	= 8,
+		.base_baud	= 115200,
+		.first_offset	= 0x40,
+	},
+	[pbn_fintek_12] = {
+		.num_ports	= 12,
+		.uart_offset	= 8,
+		.base_baud	= 115200,
+		.first_offset	= 0x40,
+	},
+	[pbn_fintek_F81504A] = {
+		.num_ports	= 4,
+		.uart_offset	= 8,
+		.base_baud	= 115200,
+	},
+	[pbn_fintek_F81508A] = {
+		.num_ports	= 8,
+		.uart_offset	= 8,
+		.base_baud	= 115200,
+	},
+	[pbn_fintek_F81512A] = {
+		.num_ports	= 12,
+		.uart_offset	= 8,
+		.base_baud	= 115200,
+	},
+	[pbn_wch382_2] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+		.first_offset	= 0xC0,
+	},
+	[pbn_wch384_4] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 4,
+		.base_baud      = 115200,
+		.uart_offset    = 8,
+		.first_offset   = 0xC0,
+	},
+	/*
+	 * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
+	 */
+	[pbn_pericom_PI7C9X7951] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 1,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_pericom_PI7C9X7952] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 2,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_pericom_PI7C9X7954] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 4,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_pericom_PI7C9X7958] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 8,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_sunix_pci_1s] = {
+		.num_ports	= 1,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_sunix_pci_2s] = {
+		.num_ports	= 2,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_sunix_pci_4s] = {
+		.num_ports	= 4,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_sunix_pci_8s] = {
+		.num_ports	= 8,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_sunix_pci_16s] = {
+		.num_ports	= 16,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_moxa8250_2p] = {
+		.flags		= FL_BASE1,
+		.num_ports      = 2,
+		.base_baud      = 921600,
+		.uart_offset	= 0x200,
+	},
+	[pbn_moxa8250_4p] = {
+		.flags		= FL_BASE1,
+		.num_ports      = 4,
+		.base_baud      = 921600,
+		.uart_offset	= 0x200,
+	},
+	[pbn_moxa8250_8p] = {
+		.flags		= FL_BASE1,
+		.num_ports      = 8,
+		.base_baud      = 921600,
+		.uart_offset	= 0x200,
+	},
+};
+
+static const struct pci_device_id blacklist[] = {
+	/* softmodems */
+	{ PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
+	{ PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */
+	{ PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */
+
+	/* multi-io cards handled by parport_serial */
+	{ PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */
+	{ PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */
+	{ PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */
+
+	/* Intel platforms with MID UART */
+	{ PCI_VDEVICE(INTEL, 0x081b), },
+	{ PCI_VDEVICE(INTEL, 0x081c), },
+	{ PCI_VDEVICE(INTEL, 0x081d), },
+	{ PCI_VDEVICE(INTEL, 0x1191), },
+	{ PCI_VDEVICE(INTEL, 0x18d8), },
+	{ PCI_VDEVICE(INTEL, 0x19d8), },
+
+	/* Intel platforms with DesignWare UART */
+	{ PCI_VDEVICE(INTEL, 0x0936), },
+	{ PCI_VDEVICE(INTEL, 0x0f0a), },
+	{ PCI_VDEVICE(INTEL, 0x0f0c), },
+	{ PCI_VDEVICE(INTEL, 0x228a), },
+	{ PCI_VDEVICE(INTEL, 0x228c), },
+	{ PCI_VDEVICE(INTEL, 0x9ce3), },
+	{ PCI_VDEVICE(INTEL, 0x9ce4), },
+
+	/* Exar devices */
+	{ PCI_VDEVICE(EXAR, PCI_ANY_ID), },
+	{ PCI_VDEVICE(COMMTECH, PCI_ANY_ID), },
+
+	/* End of the black list */
+	{ }
+};
+
+static int serial_pci_is_class_communication(struct pci_dev *dev)
+{
+	/*
+	 * If it is not a communications device or the programming
+	 * interface is greater than 6, give up.
+	 */
+	if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
+	     ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MULTISERIAL) &&
+	     ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
+	    (dev->class & 0xff) > 6)
+		return -ENODEV;
+
+	return 0;
+}
+
+/*
+ * Given a complete unknown PCI device, try to use some heuristics to
+ * guess what the configuration might be, based on the pitiful PCI
+ * serial specs.  Returns 0 on success, -ENODEV on failure.
+ */
+static int
+serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
+{
+	int num_iomem, num_port, first_port = -1, i;
+	int rc;
+
+	rc = serial_pci_is_class_communication(dev);
+	if (rc)
+		return rc;
+
+	/*
+	 * Should we try to make guesses for multiport serial devices later?
+	 */
+	if ((dev->class >> 8) == PCI_CLASS_COMMUNICATION_MULTISERIAL)
+		return -ENODEV;
+
+	num_iomem = num_port = 0;
+	for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
+		if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
+			num_port++;
+			if (first_port == -1)
+				first_port = i;
+		}
+		if (pci_resource_flags(dev, i) & IORESOURCE_MEM)
+			num_iomem++;
+	}
+
+	/*
+	 * If there is 1 or 0 iomem regions, and exactly one port,
+	 * use it.  We guess the number of ports based on the IO
+	 * region size.
+	 */
+	if (num_iomem <= 1 && num_port == 1) {
+		board->flags = first_port;
+		board->num_ports = pci_resource_len(dev, first_port) / 8;
+		return 0;
+	}
+
+	/*
+	 * Now guess if we've got a board which indexes by BARs.
+	 * Each IO BAR should be 8 bytes, and they should follow
+	 * consecutively.
+	 */
+	first_port = -1;
+	num_port = 0;
+	for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
+		if (pci_resource_flags(dev, i) & IORESOURCE_IO &&
+		    pci_resource_len(dev, i) == 8 &&
+		    (first_port == -1 || (first_port + num_port) == i)) {
+			num_port++;
+			if (first_port == -1)
+				first_port = i;
+		}
+	}
+
+	if (num_port > 1) {
+		board->flags = first_port | FL_BASE_BARS;
+		board->num_ports = num_port;
+		return 0;
+	}
+
+	return -ENODEV;
+}
+
+static inline int
+serial_pci_matches(const struct pciserial_board *board,
+		   const struct pciserial_board *guessed)
+{
+	return
+	    board->num_ports == guessed->num_ports &&
+	    board->base_baud == guessed->base_baud &&
+	    board->uart_offset == guessed->uart_offset &&
+	    board->reg_shift == guessed->reg_shift &&
+	    board->first_offset == guessed->first_offset;
+}
+
+static struct serial_private *
+pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
+{
+	struct uart_8250_port uart;
+	struct serial_private *priv;
+	struct pci_serial_quirk *quirk;
+	int rc, nr_ports, i;
+
+	nr_ports = board->num_ports;
+
+	/*
+	 * Find an init and setup quirks.
+	 */
+	quirk = find_quirk(dev);
+
+	/*
+	 * Run the new-style initialization function.
+	 * The initialization function returns:
+	 *  <0  - error
+	 *   0  - use board->num_ports
+	 *  >0  - number of ports
+	 */
+	if (quirk->init) {
+		rc = quirk->init(dev);
+		if (rc < 0) {
+			priv = ERR_PTR(rc);
+			goto err_out;
+		}
+		if (rc)
+			nr_ports = rc;
+	}
+
+	priv = xzalloc(sizeof(struct serial_private) +
+		       sizeof(unsigned int) * nr_ports);
+
+	priv->dev = dev;
+	priv->quirk = quirk;
+
+	memset(&uart, 0, sizeof(uart));
+	uart.pdata = xzalloc(sizeof(*uart.pdata));
+	uart.pdata->clock = board->base_baud * 16;
+
+	if (rc < 0) {
+		kfree(priv);
+		priv = ERR_PTR(rc);
+		goto err_deinit;
+	}
+
+	for (i = 0; i < nr_ports; i++) {
+		struct device_d *ns16550_dev;
+		struct resource *res;
+
+		rc = quirk->setup(priv, board, &uart, i);
+		if (rc == -ENOSYS) {
+			priv = ERR_PTR(-ENOSYS);
+			goto err_deinit;
+		}
+
+		if (rc)
+			break;
+
+		res = &uart.resource;
+
+		dev_dbg(&dev->dev, "setup PCI %s console @ 0x%llx-0x%llx\n",
+			res->flags & IORESOURCE_MEM ? "MMIO" : "IO port",
+			res->start, res->end);
+
+		ns16550_dev = device_alloc("ns16550_serial", DEVICE_ID_DYNAMIC);
+		ns16550_dev->platform_data = uart.pdata;
+		ns16550_dev->parent = &dev->dev;
+		device_add_resource(ns16550_dev, NULL,
+				    res->start, res->end - res->start + 1,
+				    res->flags);
+
+		rc = platform_device_register(ns16550_dev);
+		if (rc < 0) {
+			dev_err(&dev->dev, "couldn't register PCI %s console @0x%llx: %s\n",
+				res->flags & IORESOURCE_MEM ? "MMIO" : "IO port",
+				res->start, strerror(-rc));
+
+			break;
+		}
+	}
+	priv->nr = i;
+	priv->board = board;
+	return priv;
+
+err_deinit:
+	if (quirk->exit)
+		quirk->exit(dev);
+err_out:
+	return priv;
+}
+
+/*
+ * Probe one serial board.  Unfortunately, there is no rhyme nor reason
+ * to the arrangement of serial ports on a PCI card.
+ */
+static int
+pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
+{
+	struct pci_serial_quirk *quirk;
+	struct serial_private *priv;
+	const struct pciserial_board *board;
+	const struct pci_device_id *exclude;
+	struct pciserial_board tmp;
+	int rc;
+
+	quirk = find_quirk(dev);
+	if (quirk->probe) {
+		rc = quirk->probe(dev);
+		if (rc)
+			return rc;
+	}
+
+	if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
+		dev_err(&dev->dev, "invalid driver_data: %ld\n",
+			ent->driver_data);
+		return -EINVAL;
+	}
+
+	board = &pci_boards[ent->driver_data];
+
+	exclude = pci_match_id(blacklist, dev);
+	if (exclude)
+		return -ENODEV;
+
+	rc = pci_enable_device(dev);
+	if (rc)
+		return rc;
+
+	if (ent->driver_data == pbn_default) {
+		/*
+		 * Use a copy of the pci_board entry for this;
+		 * avoid changing entries in the table.
+		 */
+		memcpy(&tmp, board, sizeof(struct pciserial_board));
+		board = &tmp;
+
+		/*
+		 * We matched one of our class entries.  Try to
+		 * determine the parameters of this board.
+		 */
+		rc = serial_pci_guess_board(dev, &tmp);
+		if (rc)
+			return rc;
+	} else {
+		/*
+		 * We matched an explicit entry.  If we are able to
+		 * detect this boards settings with our heuristic,
+		 * then we no longer need this entry.
+		 */
+		memcpy(&tmp, &pci_boards[pbn_default],
+		       sizeof(struct pciserial_board));
+		rc = serial_pci_guess_board(dev, &tmp);
+		if (rc == 0 && serial_pci_matches(board, &tmp))
+			moan_device("Redundant entry in serial pci_table.",
+				    dev);
+	}
+
+	priv = pciserial_init_ports(dev, board);
+	if (IS_ERR(priv)) {
+		if (PTR_ERR(priv) == -ENOSYS) {
+			dev_err(&dev->dev,
+				"serial port requires not-yet-supported quirky behavior.\n"
+				"Consider porting it over from the Linux 8250_pci driver\n");
+		}
+
+		return PTR_ERR(priv);
+	}
+
+	dev->dev.priv = priv;
+	return 0;
+}
+
+static const struct pci_device_id serial_pci_tbl[] = {
+	/* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */
+	{	PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
+		PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0,
+		pbn_b2_8_921600 },
+	/* Advantech also use 0x3618 and 0xf618 */
+	{	PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3618,
+		PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCIf618,
+		PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
+		PCI_SUBVENDOR_ID_CONNECT_TECH,
+		PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
+		pbn_b1_8_1382400 },
+	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
+		PCI_SUBVENDOR_ID_CONNECT_TECH,
+		PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
+		pbn_b1_4_1382400 },
+	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
+		PCI_SUBVENDOR_ID_CONNECT_TECH,
+		PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
+		pbn_b1_2_1382400 },
+	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+		PCI_SUBVENDOR_ID_CONNECT_TECH,
+		PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
+		pbn_b1_8_1382400 },
+	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+		PCI_SUBVENDOR_ID_CONNECT_TECH,
+		PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
+		pbn_b1_4_1382400 },
+	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+		PCI_SUBVENDOR_ID_CONNECT_TECH,
+		PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
+		pbn_b1_2_1382400 },
+	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+		PCI_SUBVENDOR_ID_CONNECT_TECH,
+		PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0,
+		pbn_b1_8_921600 },
+	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+		PCI_SUBVENDOR_ID_CONNECT_TECH,
+		PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0,
+		pbn_b1_8_921600 },
+	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+		PCI_SUBVENDOR_ID_CONNECT_TECH,
+		PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0,
+		pbn_b1_4_921600 },
+	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+		PCI_SUBVENDOR_ID_CONNECT_TECH,
+		PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0,
+		pbn_b1_4_921600 },
+	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+		PCI_SUBVENDOR_ID_CONNECT_TECH,
+		PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0,
+		pbn_b1_2_921600 },
+	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+		PCI_SUBVENDOR_ID_CONNECT_TECH,
+		PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0,
+		pbn_b1_8_921600 },
+	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+		PCI_SUBVENDOR_ID_CONNECT_TECH,
+		PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0,
+		pbn_b1_8_921600 },
+	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+		PCI_SUBVENDOR_ID_CONNECT_TECH,
+		PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0,
+		pbn_b1_4_921600 },
+	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+		PCI_SUBVENDOR_ID_CONNECT_TECH,
+		PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0,
+		pbn_b1_2_1250000 },
+	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
+		PCI_SUBVENDOR_ID_CONNECT_TECH,
+		PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0,
+		pbn_b0_2_1843200 },
+	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
+		PCI_SUBVENDOR_ID_CONNECT_TECH,
+		PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0,
+		pbn_b0_4_1843200 },
+	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
+		PCI_VENDOR_ID_AFAVLAB,
+		PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0,
+		pbn_b0_4_1152000 },
+	{	PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_bt_1_115200 },
+	{	PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_bt_2_115200 },
+	{	PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_bt_4_115200 },
+	{	PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_bt_2_115200 },
+	{	PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_bt_4_115200 },
+	{	PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_8_115200 },
+	{	PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_8_460800 },
+	{	PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_8_115200 },
+
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_bt_2_115200 },
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_bt_2_921600 },
+	/*
+	 * VScom SPCOM800, from sl@s.pl
+	 */
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_8_921600 },
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_4_921600 },
+	/* Unknown card - subdevice 0x1584 */
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+		PCI_VENDOR_ID_PLX,
+		PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
+		pbn_b2_4_115200 },
+	/* Unknown card - subdevice 0x1588 */
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+		PCI_VENDOR_ID_PLX,
+		PCI_SUBDEVICE_ID_UNKNOWN_0x1588, 0, 0,
+		pbn_b2_8_115200 },
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+		PCI_SUBVENDOR_ID_KEYSPAN,
+		PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
+		pbn_panacom },
+	{	PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_panacom4 },
+	{	PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_panacom2 },
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
+		PCI_VENDOR_ID_ESDGMBH,
+		PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0,
+		pbn_b2_4_115200 },
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+		PCI_SUBVENDOR_ID_CHASE_PCIFAST,
+		PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
+		pbn_b2_4_460800 },
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+		PCI_SUBVENDOR_ID_CHASE_PCIFAST,
+		PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
+		pbn_b2_8_460800 },
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+		PCI_SUBVENDOR_ID_CHASE_PCIFAST,
+		PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
+		pbn_b2_16_460800 },
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+		PCI_SUBVENDOR_ID_CHASE_PCIFAST,
+		PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
+		pbn_b2_16_460800 },
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+		PCI_SUBVENDOR_ID_CHASE_PCIRAS,
+		PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
+		pbn_b2_4_460800 },
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+		PCI_SUBVENDOR_ID_CHASE_PCIRAS,
+		PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
+		pbn_b2_8_460800 },
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+		PCI_SUBVENDOR_ID_EXSYS,
+		PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0,
+		pbn_b2_4_115200 },
+	/*
+	 * Megawolf Romulus PCI Serial Card, from Mike Hudson
+	 * (Exoray@isys.ca)
+	 */
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
+		0x10b5, 0x106a, 0, 0,
+		pbn_plx_romulus },
+	/*
+	* EndRun Technologies. PCI express device range.
+	*    EndRun PTP/1588 has 2 Native UARTs.
+	*/
+	{	PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_endrun_2_4000000 },
+	/*
+	 * Quatech cards. These actually have configurable clocks but for
+	 * now we just use the default.
+	 *
+	 * 100 series are RS232, 200 series RS422,
+	 */
+	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_4_115200 },
+	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_2_115200 },
+	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_2_115200 },
+	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC200,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_4_115200 },
+	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_8_115200 },
+	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_8_115200 },
+	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP100,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_4_115200 },
+	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP100,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_2_115200 },
+	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP200,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_4_115200 },
+	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP200,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_2_115200 },
+	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP100,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_4_115200 },
+	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP100,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP100,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_1_115200 },
+	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP200,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_4_115200 },
+	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP200,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP200,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_1_115200 },
+	{	PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESCLP100,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_8_115200 },
+
+	{	PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
+		PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4,
+		0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
+		PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL,
+		0, 0,
+		pbn_b0_4_1152000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0x9505,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_2_921600 },
+
+		/*
+		 * The below card is a little controversial since it is the
+		 * subject of a PCI vendor/device ID clash.  (See
+		 * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).
+		 * For now just used the hex ID 0x950a.
+		 */
+	{	PCI_VENDOR_ID_OXSEMI, 0x950a,
+		PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_00,
+		0, 0, pbn_b0_2_115200 },
+	{	PCI_VENDOR_ID_OXSEMI, 0x950a,
+		PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_30,
+		0, 0, pbn_b0_2_115200 },
+	{	PCI_VENDOR_ID_OXSEMI, 0x950a,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_2_1130000 },
+	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950,
+		PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0,
+		pbn_b0_1_921600 },
+	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_115200 },
+	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_2_921600 },
+	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_8_1152000 },
+
+	/*
+	 * Oxford Semiconductor Inc. Tornado PCI express device range.
+	 */
+	{	PCI_VENDOR_ID_OXSEMI, 0xc101,    /* OXPCIe952 1 Legacy UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc105,    /* OXPCIe952 1 Legacy UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc11b,    /* OXPCIe952 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc11f,    /* OXPCIe952 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc120,    /* OXPCIe952 1 Legacy UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc124,    /* OXPCIe952 1 Legacy UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc138,    /* OXPCIe952 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc13d,    /* OXPCIe952 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc140,    /* OXPCIe952 1 Legacy UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc141,    /* OXPCIe952 1 Legacy UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc144,    /* OXPCIe952 1 Legacy UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc145,    /* OXPCIe952 1 Legacy UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc158,    /* OXPCIe952 2 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_2_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc15d,    /* OXPCIe952 2 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_2_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc208,    /* OXPCIe954 4 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_4_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc20d,    /* OXPCIe954 4 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_4_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc308,    /* OXPCIe958 8 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_8_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc30d,    /* OXPCIe958 8 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_8_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc40b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc40f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc41b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc41f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc42b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc42f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc43b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc43f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc44b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc44f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc45b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc45f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc46b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc46f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc47b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc47f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc48b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc48f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc49b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc49f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc4ab,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc4af,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc4bb,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc4bf,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc4cb,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc4cf,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	/*
+	 * Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado
+	 */
+	{	PCI_VENDOR_ID_MAINPINE, 0x4000,	/* IQ Express 1 Port V.34 Super-G3 Fax */
+		PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_MAINPINE, 0x4000,	/* IQ Express 2 Port V.34 Super-G3 Fax */
+		PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0,
+		pbn_oxsemi_2_4000000 },
+	{	PCI_VENDOR_ID_MAINPINE, 0x4000,	/* IQ Express 4 Port V.34 Super-G3 Fax */
+		PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0,
+		pbn_oxsemi_4_4000000 },
+	{	PCI_VENDOR_ID_MAINPINE, 0x4000,	/* IQ Express 8 Port V.34 Super-G3 Fax */
+		PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0,
+		pbn_oxsemi_8_4000000 },
+
+	/*
+	 * Digi/IBM PCIe 2-port Async EIA-232 Adapter utilizing OxSemi Tornado
+	 */
+	{	PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM,
+		PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_2_4000000 },
+
+	/*
+	 * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
+	 * from skokodyn@yahoo.com
+	 */
+	{	PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+		PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0,
+		pbn_sbsxrsio },
+	{	PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+		PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0,
+		pbn_sbsxrsio },
+	{	PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+		PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0,
+		pbn_sbsxrsio },
+	{	PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+		PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0,
+		pbn_sbsxrsio },
+
+	/*
+	 * Digitan DS560-558, from jimd@esoft.com
+	 */
+	{	PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_1_115200 },
+
+	/*
+	 * Titan Electronic cards
+	 *  The 400L and 800L have a custom setup quirk.
+	 */
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_2_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_1_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_bt_2_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_8_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b4_bt_2_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b4_bt_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b4_bt_8_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_2_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_4_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_8_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_2_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_2_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200V3,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_2_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400V3,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_410V3,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3B,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_1_460800 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_1_460800 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_1_460800 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_bt_2_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_bt_2_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_bt_2_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_bt_4_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_bt_4_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_bt_4_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_2_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_2_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_2_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_4_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_4_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_4_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_8_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_8_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_8_921600 },
+
+	/*
+	 * Computone devices submitted by Doug McNash dmcnash@computone.com
+	 */
+	{	PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
+		PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4,
+		0, 0, pbn_computone_4 },
+	{	PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
+		PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8,
+		0, 0, pbn_computone_8 },
+	{	PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
+		PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6,
+		0, 0, pbn_computone_6 },
+
+	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi },
+	{	PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
+		PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_1_921600 },
+
+	/*
+	 * Sunix PCI serial boards
+	 */
+	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+		PCI_VENDOR_ID_SUNIX, 0x0001, 0, 0,
+		pbn_sunix_pci_1s },
+	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+		PCI_VENDOR_ID_SUNIX, 0x0002, 0, 0,
+		pbn_sunix_pci_2s },
+	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+		PCI_VENDOR_ID_SUNIX, 0x0004, 0, 0,
+		pbn_sunix_pci_4s },
+	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+		PCI_VENDOR_ID_SUNIX, 0x0084, 0, 0,
+		pbn_sunix_pci_4s },
+	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+		PCI_VENDOR_ID_SUNIX, 0x0008, 0, 0,
+		pbn_sunix_pci_8s },
+	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+		PCI_VENDOR_ID_SUNIX, 0x0088, 0, 0,
+		pbn_sunix_pci_8s },
+	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+		PCI_VENDOR_ID_SUNIX, 0x0010, 0, 0,
+		pbn_sunix_pci_16s },
+
+	/*
+	 * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org>
+	 */
+	{	PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_8_115200 },
+	{	PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_8_115200 },
+
+	{	PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_2_115200 },
+	{	PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_2_115200 },
+	{	PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_2_115200 },
+	{	PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_2_115200 },
+	{	PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_2_115200 },
+	{	PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_4_460800 },
+	{	PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_4_460800 },
+	{	PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_2_460800 },
+	{	PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_2_460800 },
+	{	PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_2_460800 },
+	{	PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_1_115200 },
+	{	PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_1_460800 },
+
+	/*
+	 * Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408).
+	 * Cards are identified by their subsystem vendor IDs, which
+	 * (in hex) match the model number.
+	 *
+	 * Note that JC140x are RS422/485 cards which require ox950
+	 * ACR = 0x10, and as such are not currently fully supported.
+	 */
+	{	PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
+		0x1204, 0x0004, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
+		0x1208, 0x0004, 0, 0,
+		pbn_b0_4_921600 },
+/*	{	PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
+		0x1402, 0x0002, 0, 0,
+		pbn_b0_2_921600 }, */
+/*	{	PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
+		0x1404, 0x0004, 0, 0,
+		pbn_b0_4_921600 }, */
+	{	PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1,
+		0x1208, 0x0004, 0, 0,
+		pbn_b0_4_921600 },
+
+	{	PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2,
+		0x1204, 0x0004, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2,
+		0x1208, 0x0004, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF3,
+		0x1208, 0x0004, 0, 0,
+		pbn_b0_4_921600 },
+	/*
+	 * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com
+	 */
+	{	PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_1_1382400 },
+
+	/*
+	 * Dell Remote Access Card III - Tim_T_Murphy@Dell.com
+	 */
+	{	PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_1_1382400 },
+
+	/*
+	 * RAStel 2 port modem, gerg@moreton.com.au
+	 */
+	{	PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_bt_2_115200 },
+
+	/*
+	 * EKF addition for i960 Boards form EKF with serial port
+	 */
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP,
+		0xE4BF, PCI_ANY_ID, 0, 0,
+		pbn_intel_i960 },
+
+	/*
+	 * Xircom Cardbus/Ethernet combos
+	 */
+	{	PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_115200 },
+	/*
+	 * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry)
+	 */
+	{	PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_115200 },
+
+	/*
+	 * Untested PCI modems, sent in from various folks...
+	 */
+
+	/*
+	 * Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de>
+	 */
+	{	PCI_VENDOR_ID_ROCKWELL, 0x1004,
+		0x1048, 0x1500, 0, 0,
+		pbn_b1_1_115200 },
+
+	{	PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
+		0xFF00, 0, 0, 0,
+		pbn_sgi_ioc3 },
+
+	/*
+	 * HP Diva card
+	 */
+	{	PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
+		PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0,
+		pbn_b1_1_115200 },
+	{	PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_5_115200 },
+	{	PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b2_1_115200 },
+
+	{	PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b3_2_115200 },
+	{	PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b3_4_115200 },
+	{	PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b3_8_115200 },
+	/*
+	 * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
+	 */
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7951,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7951 },
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7952,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7952 },
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7954,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7954 },
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7958,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7958 },
+	/*
+	 * ACCES I/O Products quad
+	 */
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7952 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7952 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7954 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7954 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7952 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7952 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7954 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7954 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7952 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7952 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7954 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7954 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7951 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7952 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7952 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7954 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7954 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7952 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7954 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7952 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7952 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7954 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7954 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7952 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7954 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7954 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7958 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_8,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7958 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7954 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7958 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7954 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7958 },
+	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pericom_PI7C9X7954 },
+	/*
+	 * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
+	 */
+	{	PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_115200 },
+	/*
+	 * ITE
+	 */
+	{	PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b1_bt_1_115200 },
+
+	/*
+	 * IntaShield IS-200
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,	/* 135a.0811 */
+		pbn_b2_2_115200 },
+	/*
+	 * IntaShield IS-400
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,    /* 135a.0dc0 */
+		pbn_b2_4_115200 },
+	/*
+	 * BrainBoxes UC-260
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0D21,
+		PCI_ANY_ID, PCI_ANY_ID,
+		PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00,
+		pbn_b2_4_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0E34,
+		PCI_ANY_ID, PCI_ANY_ID,
+		 PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00,
+		pbn_b2_4_115200 },
+	/*
+	 * Perle PCI-RAS cards
+	 */
+	{       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
+		PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4,
+		0, 0, pbn_b2_4_921600 },
+	{       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
+		PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8,
+		0, 0, pbn_b2_8_921600 },
+
+	/*
+	 * Mainpine series cards: Fairly standard layout but fools
+	 * parts of the autodetect in some cases and uses otherwise
+	 * unmatched communications subclasses in the PCI Express case
+	 */
+
+	{	/* RockForceDUO */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x0200,
+		0, 0, pbn_b0_2_115200 },
+	{	/* RockForceQUATRO */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x0300,
+		0, 0, pbn_b0_4_115200 },
+	{	/* RockForceDUO+ */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x0400,
+		0, 0, pbn_b0_2_115200 },
+	{	/* RockForceQUATRO+ */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x0500,
+		0, 0, pbn_b0_4_115200 },
+	{	/* RockForce+ */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x0600,
+		0, 0, pbn_b0_2_115200 },
+	{	/* RockForce+ */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x0700,
+		0, 0, pbn_b0_4_115200 },
+	{	/* RockForceOCTO+ */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x0800,
+		0, 0, pbn_b0_8_115200 },
+	{	/* RockForceDUO+ */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x0C00,
+		0, 0, pbn_b0_2_115200 },
+	{	/* RockForceQUARTRO+ */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x0D00,
+		0, 0, pbn_b0_4_115200 },
+	{	/* RockForceOCTO+ */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x1D00,
+		0, 0, pbn_b0_8_115200 },
+	{	/* RockForceD1 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x2000,
+		0, 0, pbn_b0_1_115200 },
+	{	/* RockForceF1 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x2100,
+		0, 0, pbn_b0_1_115200 },
+	{	/* RockForceD2 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x2200,
+		0, 0, pbn_b0_2_115200 },
+	{	/* RockForceF2 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x2300,
+		0, 0, pbn_b0_2_115200 },
+	{	/* RockForceD4 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x2400,
+		0, 0, pbn_b0_4_115200 },
+	{	/* RockForceF4 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x2500,
+		0, 0, pbn_b0_4_115200 },
+	{	/* RockForceD8 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x2600,
+		0, 0, pbn_b0_8_115200 },
+	{	/* RockForceF8 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x2700,
+		0, 0, pbn_b0_8_115200 },
+	{	/* IQ Express D1 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x3000,
+		0, 0, pbn_b0_1_115200 },
+	{	/* IQ Express F1 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x3100,
+		0, 0, pbn_b0_1_115200 },
+	{	/* IQ Express D2 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x3200,
+		0, 0, pbn_b0_2_115200 },
+	{	/* IQ Express F2 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x3300,
+		0, 0, pbn_b0_2_115200 },
+	{	/* IQ Express D4 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x3400,
+		0, 0, pbn_b0_4_115200 },
+	{	/* IQ Express F4 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x3500,
+		0, 0, pbn_b0_4_115200 },
+	{	/* IQ Express D8 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x3C00,
+		0, 0, pbn_b0_8_115200 },
+	{	/* IQ Express F8 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x3D00,
+		0, 0, pbn_b0_8_115200 },
+
+
+	/*
+	 * PA Semi PA6T-1682M on-chip UART
+	 */
+	{	PCI_VENDOR_ID_PASEMI, 0xa004,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pasemi_1682M },
+
+	/*
+	 * National Instruments
+	 */
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI23216,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_16_115200 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2328,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_8_115200 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_bt_4_115200 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_bt_2_115200 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324I,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_bt_4_115200 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322I,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_bt_2_115200 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_23216,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_16_115200 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2328,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_8_115200 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2324,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_bt_4_115200 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2322,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_bt_2_115200 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2324,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_bt_4_115200 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2322,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b1_bt_2_115200 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2322,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8430_2 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2322,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8430_2 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2324,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8430_4 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2324,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8430_4 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2328,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8430_8 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2328,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8430_8 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_23216,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8430_16 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_23216,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8430_16 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2322,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8430_2 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2322,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8430_2 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2324,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8430_4 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8430_4 },
+	{	PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8430_2328,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8430_pxie_8 },
+	{	PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8430_23216,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8430_pxie_16 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8431_4852,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8431_2 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8431_4854,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8431_4 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8431_4858,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8431_8 },
+	{	PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8431_4858,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8431_pxie_8 },
+	{	PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8431_48516,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8431_pxie_16 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8433_4852,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8431_2 },
+	{	PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8433_4854,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_ni8431_4 },
+
+	/*
+	 * MOXA
+	 */
+	{	PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_moxa8250_2p },
+	{	PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102EL,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_moxa8250_2p },
+	{	PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104EL_A,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_moxa8250_4p },
+	{	PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP114EL,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_moxa8250_4p },
+	{	PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP116E_A_A,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_moxa8250_8p },
+	{	PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP116E_A_B,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_moxa8250_8p },
+	{	PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP118EL_A,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_moxa8250_8p },
+	{	PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP118E_A_I,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_moxa8250_8p },
+	{	PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132EL,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_moxa8250_2p },
+	{	PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP134EL_A,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_moxa8250_4p },
+	{	PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP138E_A,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_moxa8250_8p },
+	{	PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP168EL_A,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_moxa8250_8p },
+
+	/*
+	* ADDI-DATA GmbH communication cards <info@addi-data.com>
+	*/
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_APCI7500,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_b0_4_115200 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_APCI7420,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_b0_2_115200 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_APCI7300,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_AMCC,
+		PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_b1_8_115200 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_APCI7500_2,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_b0_4_115200 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_APCI7420_2,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_b0_2_115200 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_APCI7300_2,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_APCI7500_3,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_b0_4_115200 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_APCI7420_3,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_b0_2_115200 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_APCI7300_3,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_APCI7800_3,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_b0_8_115200 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_APCIe7500,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_ADDIDATA_PCIe_4_3906250 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_APCIe7420,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_ADDIDATA_PCIe_2_3906250 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_APCIe7300,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_ADDIDATA_PCIe_1_3906250 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_APCIe7800,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_ADDIDATA_PCIe_8_3906250 },
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
+		PCI_VENDOR_ID_IBM, 0x0299,
+		0, 0, pbn_b0_bt_2_115200 },
+
+	/*
+	 * other NetMos 9835 devices are most likely handled by the
+	 * parport_serial driver, check drivers/parport/parport_serial.c
+	 * before adding them here.
+	 */
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
+		0xA000, 0x1000,
+		0, 0, pbn_b0_1_115200 },
+
+	/* the 9901 is a rebranded 9912 */
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912,
+		0xA000, 0x1000,
+		0, 0, pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922,
+		0xA000, 0x1000,
+		0, 0, pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9904,
+		0xA000, 0x1000,
+		0, 0, pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+		0xA000, 0x1000,
+		0, 0, pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+		0xA000, 0x3002,
+		0, 0, pbn_NETMOS9900_2s_115200 },
+
+	/*
+	 * Best Connectivity and Rosewill PCI Multi I/O cards
+	 */
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+		0xA000, 0x1000,
+		0, 0, pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+		0xA000, 0x3002,
+		0, 0, pbn_b0_bt_2_115200 },
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+		0xA000, 0x3004,
+		0, 0, pbn_b0_bt_4_115200 },
+	/* Intel CE4100 */
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART,
+		PCI_ANY_ID,  PCI_ANY_ID, 0, 0,
+		pbn_ce4100_1_115200 },
+
+	/*
+	 * Cronyx Omega PCI
+	 */
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_omegapci },
+
+	/*
+	 * Broadcom TruManage
+	 */
+	{	PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_brcm_trumanage },
+
+	/*
+	 * AgeStar as-prs2-009
+	 */
+	{	PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, pbn_b0_bt_2_115200 },
+
+	/*
+	 * WCH CH353 series devices: The 2S1P is handled by parport_serial
+	 * so not listed here.
+	 */
+	{	PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_4S,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, pbn_b0_bt_4_115200 },
+
+	{	PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_2S1PF,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, pbn_b0_bt_2_115200 },
+
+	{	PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH355_4S,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, pbn_b0_bt_4_115200 },
+
+	{	PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH382_2S,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, pbn_wch382_2 },
+
+	{	PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, pbn_wch384_4 },
+
+	/* Fintek PCI serial cards */
+	{ PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 },
+	{ PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 },
+	{ PCI_DEVICE(0x1c29, 0x1112), .driver_data = pbn_fintek_12 },
+	{ PCI_DEVICE(0x1c29, 0x1204), .driver_data = pbn_fintek_F81504A },
+	{ PCI_DEVICE(0x1c29, 0x1208), .driver_data = pbn_fintek_F81508A },
+	{ PCI_DEVICE(0x1c29, 0x1212), .driver_data = pbn_fintek_F81512A },
+
+	/* MKS Tenta SCOM-080x serial cards */
+	{ PCI_DEVICE(0x1601, 0x0800), .driver_data = pbn_b0_4_1250000 },
+	{ PCI_DEVICE(0x1601, 0xa801), .driver_data = pbn_b0_4_1250000 },
+
+	/* Amazon PCI serial device */
+	{ PCI_DEVICE(0x1d0f, 0x8250), .driver_data = pbn_b0_1_115200 },
+
+	/*
+	 * These entries match devices with class COMMUNICATION_SERIAL,
+	 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
+	 */
+	{	PCI_ANY_ID, PCI_ANY_ID,
+		PCI_ANY_ID, PCI_ANY_ID,
+		PCI_CLASS_COMMUNICATION_SERIAL << 8,
+		0xffff00, pbn_default },
+	{	PCI_ANY_ID, PCI_ANY_ID,
+		PCI_ANY_ID, PCI_ANY_ID,
+		PCI_CLASS_COMMUNICATION_MODEM << 8,
+		0xffff00, pbn_default },
+	{	PCI_ANY_ID, PCI_ANY_ID,
+		PCI_ANY_ID, PCI_ANY_ID,
+		PCI_CLASS_COMMUNICATION_MULTISERIAL << 8,
+		0xffff00, pbn_default },
+	{ 0, }
+};
+
+static struct pci_driver serial_pci_driver = {
+	.name		= "ns16550_serial_pci",
+	.probe		= pciserial_init_one,
+	.id_table	= serial_pci_tbl,
+};
+
+static int __init serial_pci_register(void)
+{
+	return pci_driver_register(&serial_pci_driver);
+}
+console_initcall(serial_pci_register);
diff --git a/include/driver.h b/include/driver.h
index 300603f..ad59ce9 100644
--- a/include/driver.h
+++ b/include/driver.h
@@ -155,12 +155,12 @@
 /* Iterate over a devices children
  */
 #define device_for_each_child(dev, child) \
-	list_for_each_entry(child, &dev->children, sibling)
+	list_for_each_entry(child, &(dev)->children, sibling)
 
 /* Iterate over a devices children - Safe against removal version
  */
 #define device_for_each_child_safe(dev, tmpdev, child) \
-	list_for_each_entry_safe(child, tmpdev, &dev->children, sibling)
+	list_for_each_entry_safe(child, tmpdev, &(dev)->children, sibling)
 
 /* Iterate through the devices of a given type. if last is NULL, the
  * first device of this type is returned. Put this pointer in as
diff --git a/include/efi.h b/include/efi.h
index 166803a..43c0593 100644
--- a/include/efi.h
+++ b/include/efi.h
@@ -91,21 +91,23 @@
  */
 
 /* Memory types: */
-#define EFI_RESERVED_TYPE		 0
-#define EFI_LOADER_CODE			 1
-#define EFI_LOADER_DATA			 2
-#define EFI_BOOT_SERVICES_CODE		 3
-#define EFI_BOOT_SERVICES_DATA		 4
-#define EFI_RUNTIME_SERVICES_CODE	 5
-#define EFI_RUNTIME_SERVICES_DATA	 6
-#define EFI_CONVENTIONAL_MEMORY		 7
-#define EFI_UNUSABLE_MEMORY		 8
-#define EFI_ACPI_RECLAIM_MEMORY		 9
-#define EFI_ACPI_MEMORY_NVS		10
-#define EFI_MEMORY_MAPPED_IO		11
-#define EFI_MEMORY_MAPPED_IO_PORT_SPACE	12
-#define EFI_PAL_CODE			13
-#define EFI_MAX_MEMORY_TYPE		14
+enum efi_memory_type {
+	EFI_RESERVED_TYPE,
+	EFI_LOADER_CODE,
+	EFI_LOADER_DATA,
+	EFI_BOOT_SERVICES_CODE,
+	EFI_BOOT_SERVICES_DATA,
+	EFI_RUNTIME_SERVICES_CODE,
+	EFI_RUNTIME_SERVICES_DATA,
+	EFI_CONVENTIONAL_MEMORY,
+	EFI_UNUSABLE_MEMORY,
+	EFI_ACPI_RECLAIM_MEMORY,
+	EFI_ACPI_MEMORY_NVS,
+	EFI_MEMORY_MAPPED_IO,
+	EFI_MEMORY_MAPPED_IO_PORT_SPACE,
+	EFI_PAL_CODE,
+	EFI_MAX_MEMORY_TYPE
+};
 
 /* Attribute values: */
 #define EFI_MEMORY_UC		((u64)0x0000000000000001ULL)	/* uncached */
@@ -124,10 +126,12 @@
 /*
  * Allocation types for calls to boottime->allocate_pages.
  */
-#define EFI_ALLOCATE_ANY_PAGES		0
-#define EFI_ALLOCATE_MAX_ADDRESS	1
-#define EFI_ALLOCATE_ADDRESS		2
-#define EFI_MAX_ALLOCATE_TYPE		3
+enum efi_allocate_type {
+	EFI_ALLOCATE_ANY_PAGES,
+	EFI_ALLOCATE_MAX_ADDRESS,
+	EFI_ALLOCATE_ADDRESS,
+	EFI_MAX_ALLOCATE_TYPE
+};
 
 typedef int (*efi_freemem_callback_t) (u64 start, u64 end, void *arg);
 
diff --git a/include/efi/efi-device.h b/include/efi/efi-device.h
index 5eaf1f2..5ec59a8 100644
--- a/include/efi/efi-device.h
+++ b/include/efi/efi-device.h
@@ -45,4 +45,16 @@
 void efi_register_devices(void);
 struct efi_device *efi_get_bootsource(void);
 
+static inline bool efi_device_has_guid(struct efi_device *efidev, efi_guid_t guid)
+{
+	int i;
+
+	for (i = 0; i < efidev->num_guids; i++) {
+		if (!efi_guidcmp(efidev->guids[i], guid))
+			return true;
+	}
+
+	return false;
+}
+
 #endif /* __EFI_EFI_DEVICE_H */
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index d812521..1fbb3dc 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -15,6 +15,7 @@
 	__u32 vendor, device;		/* Vendor and device ID or PCI_ANY_ID*/
 	__u32 subvendor, subdevice;	/* Subsystem ID's or PCI_ANY_ID */
 	__u32 class, class_mask;	/* (class,subclass,prog-if) triplet */
+	unsigned long driver_data;	/* Data private to the driver */
 };
 
 #define SPI_NAME_SIZE 32
diff --git a/include/linux/pci.h b/include/linux/pci.h
index d92d70b..c742570 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -115,6 +115,17 @@
 };
 #define	to_pci_dev(d) container_of(d, struct pci_dev, dev)
 
+#define pci_resource_start(dev, bar)	((dev)->resource[(bar)].start)
+#define pci_resource_end(dev, bar)	((dev)->resource[(bar)].end)
+#define pci_resource_flags(dev, bar)	((dev)->resource[(bar)].flags)
+#define pci_resource_len(dev,bar) \
+	((pci_resource_start((dev), (bar)) == 0 &&	\
+	  pci_resource_end((dev), (bar)) ==		\
+	  pci_resource_start((dev), (bar))) ? 0 :	\
+							\
+	 (pci_resource_end((dev), (bar)) -		\
+	  pci_resource_start((dev), (bar)) + 1))
+
 enum {
 	PCI_BUS_RESOURCE_IO = 0,
 	PCI_BUS_RESOURCE_MEM = 1,
@@ -211,6 +222,20 @@
 	.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
 
 /**
+ * PCI_DEVICE_SUB - macro used to describe a specific PCI device with subsystem
+ * @vend: the 16 bit PCI Vendor ID
+ * @dev: the 16 bit PCI Device ID
+ * @subvend: the 16 bit PCI Subvendor ID
+ * @subdev: the 16 bit PCI Subdevice ID
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific device with subsystem information.
+ */
+#define PCI_DEVICE_SUB(vend, dev, subvend, subdev) \
+	.vendor = (vend), .device = (dev), \
+	.subvendor = (subvend), .subdevice = (subdev)
+
+/**
  * PCI_DEVICE_CLASS - macro used to describe a specific pci device class
  * @dev_class: the class, subclass, prog-if triple for this device
  * @dev_class_mask: the class mask for this device
@@ -350,4 +375,13 @@
 
 void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
 
+#ifdef CONFIG_PCI
+const struct pci_device_id *pci_match_id(const struct pci_device_id *ids,
+					 struct pci_dev *dev);
+#else
+static inline const struct pci_device_id *pci_match_id(const struct pci_device_id *ids,
+							 struct pci_dev *dev)
+{ return NULL; }
+#endif
+
 #endif /* LINUX_PCI_H */