diff --git a/dts/Bindings/crypto/inside-secure-safexcel.txt b/dts/Bindings/crypto/inside-secure-safexcel.txt index f69773f..941bb6a 100644 --- a/dts/Bindings/crypto/inside-secure-safexcel.txt +++ b/dts/Bindings/crypto/inside-secure-safexcel.txt @@ -8,7 +8,6 @@ Optional properties: - clocks: Reference to the crypto engine clock. -- dma-mask: The address mask limitation. Defaults to 64. Example: @@ -24,6 +23,5 @@ interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", "eip"; clocks = <&cpm_syscon0 1 26>; - dma-mask = <0xff 0xffffffff>; status = "disabled"; }; diff --git a/dts/Bindings/mmc/exynos-dw-mshc.txt b/dts/Bindings/mmc/exynos-dw-mshc.txt index aad9844..a58c173 100644 --- a/dts/Bindings/mmc/exynos-dw-mshc.txt +++ b/dts/Bindings/mmc/exynos-dw-mshc.txt @@ -78,7 +78,6 @@ }; dwmmc0@12200000 { - num-slots = <1>; cap-mmc-highspeed; cap-sd-highspeed; broken-cd; diff --git a/dts/Bindings/mmc/img-dw-mshc.txt b/dts/Bindings/mmc/img-dw-mshc.txt index 85de99f..c54e577 100644 --- a/dts/Bindings/mmc/img-dw-mshc.txt +++ b/dts/Bindings/mmc/img-dw-mshc.txt @@ -24,6 +24,5 @@ fifo-depth = <0x20>; bus-width = <4>; - num-slots = <1>; disable-wp; }; diff --git a/dts/Bindings/mmc/k3-dw-mshc.txt b/dts/Bindings/mmc/k3-dw-mshc.txt index 8af1afc..07242d1 100644 --- a/dts/Bindings/mmc/k3-dw-mshc.txt +++ b/dts/Bindings/mmc/k3-dw-mshc.txt @@ -36,7 +36,6 @@ /* Board portion */ dwmmc0@fcd03000 { - num-slots = <1>; vmmc-supply = <&ldo12>; fifo-depth = <0x100>; pinctrl-names = "default"; @@ -52,7 +51,6 @@ dwmmc_1: dwmmc1@f723e000 { compatible = "hisilicon,hi6220-dw-mshc"; - num-slots = <0x1>; bus-width = <0x4>; disable-wp; cap-sd-highspeed; diff --git a/dts/Bindings/mmc/synopsys-dw-mshc.txt b/dts/Bindings/mmc/synopsys-dw-mshc.txt index 9cb55ca..ef3e5f1 100644 --- a/dts/Bindings/mmc/synopsys-dw-mshc.txt +++ b/dts/Bindings/mmc/synopsys-dw-mshc.txt @@ -12,12 +12,12 @@ * #address-cells: should be 1. * #size-cells: should be 0. -# Slots: The slot specific information are contained within child-nodes with - each child-node representing a supported slot. There should be atleast one - child node representing a card slot. The name of the child node representing - the slot is recommended to be slot@n where n is the unique number of the slot - connected to the controller. The following are optional properties which - can be included in the slot child node. +# Slots (DEPRECATED): The slot specific information are contained within + child-nodes with each child-node representing a supported slot. There should + be atleast one child node representing a card slot. The name of the child node + representing the slot is recommended to be slot@n where n is the unique number + of the slot connected to the controller. The following are optional properties + which can be included in the slot child node. * reg: specifies the physical slot number. The valid values of this property is 0 to (num-slots -1), where num-slots is the value @@ -63,7 +63,7 @@ clock(cclk_out). If it's not specified, max is 200MHZ and min is 400KHz by default. (Use the "max-frequency" instead of "clock-freq-min-max".) -* num-slots: specifies the number of slots supported by the controller. +* num-slots (DEPRECATED): specifies the number of slots supported by the controller. The number of physical slots actually used could be equal or less than the value specified by num-slots. If this property is not specified, the value of num-slot property is assumed to be 1. @@ -124,7 +124,6 @@ dwmmc0@12200000 { clock-frequency = <400000000>; clock-freq-min-max = <400000 200000000>; - num-slots = <1>; broken-cd; fifo-depth = <0x80>; card-detect-delay = <200>; @@ -139,7 +138,6 @@ dwmmc0@12200000 { clock-frequency = <400000000>; clock-freq-min-max = <400000 200000000>; - num-slots = <1>; broken-cd; fifo-depth = <0x80>; card-detect-delay = <200>; diff --git a/dts/Bindings/mmc/zx-dw-mshc.txt b/dts/Bindings/mmc/zx-dw-mshc.txt index eaade0e..906819a 100644 --- a/dts/Bindings/mmc/zx-dw-mshc.txt +++ b/dts/Bindings/mmc/zx-dw-mshc.txt @@ -25,7 +25,6 @@ clock-frequency = <50000000>; clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>; clock-names = "biu", "ciu"; - num-slots = <1>; max-frequency = <50000000>; cap-sdio-irq; cap-sd-highspeed;