diff --git a/dts/Bindings/reset/socfpga-reset.txt b/dts/Bindings/reset/socfpga-reset.txt index 98c9f56..38fe34f 100644 --- a/dts/Bindings/reset/socfpga-reset.txt +++ b/dts/Bindings/reset/socfpga-reset.txt @@ -1,7 +1,8 @@ Altera SOCFPGA Reset Manager Required properties: -- compatible : "altr,rst-mgr" +- compatible : "altr,rst-mgr" for (Cyclone5/Arria5/Arria10) + "altr,stratix10-rst-mgr","altr,rst-mgr" for Stratix10 ARM64 SoC - reg : Should contain 1 register ranges(address and length) - altr,modrst-offset : Should contain the offset of the first modrst register. - #reset-cells: 1 diff --git a/dts/Bindings/reset/uniphier-reset.txt b/dts/Bindings/reset/uniphier-reset.txt index 101743d..ea00517 100644 --- a/dts/Bindings/reset/uniphier-reset.txt +++ b/dts/Bindings/reset/uniphier-reset.txt @@ -120,27 +120,30 @@ }; -USB3 core reset ---------------- +Peripheral core reset in glue layer +----------------------------------- -USB3 core reset belongs to USB3 glue layer. Before using the core reset, -it is necessary to control the clocks and resets to enable this layer. -These clocks and resets should be described in each property. +Some peripheral core reset belongs to its own glue layer. Before using +this core reset, it is necessary to control the clocks and resets to enable +this layer. These clocks and resets should be described in each property. Required properties: - compatible: Should be - "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC - "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC - "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC - "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC + "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC USB3 + "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3 + "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3 + "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3 + "socionext,uniphier-pro4-ahci-reset" - for Pro4 SoC AHCI + "socionext,uniphier-pxs2-ahci-reset" - for PXs2 SoC AHCI + "socionext,uniphier-pxs3-ahci-reset" - for PXs3 SoC AHCI - #reset-cells: Should be 1. - reg: Specifies offset and length of the register set for the device. -- clocks: A list of phandles to the clock gate for USB3 glue layer. +- clocks: A list of phandles to the clock gate for the glue layer. According to the clock-names, appropriate clocks are required. - clock-names: Should contain "gio", "link" - for Pro4 SoC "link" - for others -- resets: A list of phandles to the reset control for USB3 glue layer. +- resets: A list of phandles to the reset control for the glue layer. According to the reset-names, appropriate resets are required. - reset-names: Should contain "gio", "link" - for Pro4 SoC diff --git a/dts/src/arm/da850-evm.dts b/dts/src/arm/da850-evm.dts index a3c9b34..f04bc3e 100644 --- a/dts/src/arm/da850-evm.dts +++ b/dts/src/arm/da850-evm.dts @@ -94,6 +94,28 @@ regulator-boot-on; }; + baseboard_3v3: fixedregulator-3v3 { + /* TPS73701DCQ */ + compatible = "regulator-fixed"; + regulator-name = "baseboard_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vbat>; + regulator-always-on; + regulator-boot-on; + }; + + baseboard_1v8: fixedregulator-1v8 { + /* TPS73701DCQ */ + compatible = "regulator-fixed"; + regulator-name = "baseboard_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vbat>; + regulator-always-on; + regulator-boot-on; + }; + backlight_lcd: backlight-regulator { compatible = "regulator-fixed"; regulator-name = "lcd_backlight_pwr"; @@ -105,7 +127,7 @@ sound { compatible = "simple-audio-card"; - simple-audio-card,name = "DA850/OMAP-L138 EVM"; + simple-audio-card,name = "DA850-OMAPL138 EVM"; simple-audio-card,widgets = "Line", "Line In", "Line", "Line Out"; @@ -210,10 +232,9 @@ /* Regulators */ IOVDD-supply = <&vdcdc2_reg>; - /* Derived from VBAT: Baseboard 3.3V / 1.8V */ - AVDD-supply = <&vbat>; - DRVDD-supply = <&vbat>; - DVDD-supply = <&vbat>; + AVDD-supply = <&baseboard_3v3>; + DRVDD-supply = <&baseboard_3v3>; + DVDD-supply = <&baseboard_1v8>; }; tca6416: gpio@20 { compatible = "ti,tca6416"; diff --git a/dts/src/arm/da850-lcdk.dts b/dts/src/arm/da850-lcdk.dts index 0177e3e..3a2fa6e 100644 --- a/dts/src/arm/da850-lcdk.dts +++ b/dts/src/arm/da850-lcdk.dts @@ -39,9 +39,39 @@ }; }; + vcc_5vd: fixedregulator-vcc_5vd { + compatible = "regulator-fixed"; + regulator-name = "vcc_5vd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + vcc_3v3d: fixedregulator-vcc_3v3d { + /* TPS650250 - VDCDC1 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3d"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_5vd>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_1v8d: fixedregulator-vcc_1v8d { + /* TPS650250 - VDCDC2 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8d"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_5vd>; + regulator-always-on; + regulator-boot-on; + }; + sound { compatible = "simple-audio-card"; - simple-audio-card,name = "DA850/OMAP-L138 LCDK"; + simple-audio-card,name = "DA850-OMAPL138 LCDK"; simple-audio-card,widgets = "Line", "Line In", "Line", "Line Out"; @@ -221,6 +251,12 @@ compatible = "ti,tlv320aic3106"; reg = <0x18>; status = "okay"; + + /* Regulators */ + IOVDD-supply = <&vcc_3v3d>; + AVDD-supply = <&vcc_3v3d>; + DRVDD-supply = <&vcc_3v3d>; + DVDD-supply = <&vcc_1v8d>; }; }; diff --git a/dts/src/arm/kirkwood-dnskw.dtsi b/dts/src/arm/kirkwood-dnskw.dtsi index cbaf06f..eb91746 100644 --- a/dts/src/arm/kirkwood-dnskw.dtsi +++ b/dts/src/arm/kirkwood-dnskw.dtsi @@ -36,8 +36,8 @@ compatible = "gpio-fan"; pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>; pinctrl-names = "default"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW - &gpio1 13 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH + &gpio1 13 GPIO_ACTIVE_HIGH>; gpio-fan,speed-map = <0 0 3000 1 6000 2>; diff --git a/dts/src/arm64/marvell/armada-8040-mcbin.dtsi b/dts/src/arm64/marvell/armada-8040-mcbin.dtsi index 29ea7e8..329f8ce 100644 --- a/dts/src/arm64/marvell/armada-8040-mcbin.dtsi +++ b/dts/src/arm64/marvell/armada-8040-mcbin.dtsi @@ -183,7 +183,7 @@ pinctrl-0 = <&cp0_pcie_pins>; num-lanes = <4>; num-viewport = <8>; - reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>; + reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/dts/src/arm64/marvell/armada-ap806.dtsi b/dts/src/arm64/marvell/armada-ap806.dtsi index 7d94c1f..7f799cb 100644 --- a/dts/src/arm64/marvell/armada-ap806.dtsi +++ b/dts/src/arm64/marvell/armada-ap806.dtsi @@ -28,6 +28,23 @@ method = "smc"; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * This area matches the mapping done with a + * mainline U-Boot, and should be updated by the + * bootloader. + */ + + psci-area@4000000 { + reg = <0x0 0x4000000 0x0 0x200000>; + no-map; + }; + }; + ap806 { #address-cells = <2>; #size-cells = <2>;