diff --git a/dts/include/dt-bindings/pinctrl/dra.h b/dts/include/dt-bindings/pinctrl/dra.h
index 002a285..3d33794 100644
--- a/dts/include/dt-bindings/pinctrl/dra.h
+++ b/dts/include/dt-bindings/pinctrl/dra.h
@@ -30,7 +30,8 @@
 #define MUX_MODE14	0xe
 #define MUX_MODE15	0xf
 
-#define PULL_ENA		(1 << 16)
+#define PULL_ENA		(0 << 16)
+#define PULL_DIS		(1 << 16)
 #define PULL_UP			(1 << 17)
 #define INPUT_EN		(1 << 18)
 #define SLEWCONTROL		(1 << 19)
@@ -38,10 +39,10 @@
 #define WAKEUP_EVENT		(1 << 25)
 
 /* Active pin states */
-#define PIN_OUTPUT		0
+#define PIN_OUTPUT		(0 | PULL_DIS)
 #define PIN_OUTPUT_PULLUP	(PIN_OUTPUT | PULL_ENA | PULL_UP)
 #define PIN_OUTPUT_PULLDOWN	(PIN_OUTPUT | PULL_ENA)
-#define PIN_INPUT		INPUT_EN
+#define PIN_INPUT		(INPUT_EN | PULL_DIS)
 #define PIN_INPUT_SLEW		(INPUT_EN | SLEWCONTROL)
 #define PIN_INPUT_PULLUP	(PULL_ENA | INPUT_EN | PULL_UP)
 #define PIN_INPUT_PULLDOWN	(PULL_ENA | INPUT_EN)
diff --git a/dts/src/arm/hi3620.dtsi b/dts/src/arm/hi3620.dtsi
index ab1116d..83a5b86 100644
--- a/dts/src/arm/hi3620.dtsi
+++ b/dts/src/arm/hi3620.dtsi
@@ -73,7 +73,7 @@
 
 		L2: l2-cache {
 			compatible = "arm,pl310-cache";
-			reg = <0xfc10000 0x100000>;
+			reg = <0x100000 0x100000>;
 			interrupts = <0 15 4>;
 			cache-unified;
 			cache-level = <2>;
diff --git a/dts/src/arm/omap3-n900.dts b/dts/src/arm/omap3-n900.dts
index 1fe45d1..b15f1a7 100644
--- a/dts/src/arm/omap3-n900.dts
+++ b/dts/src/arm/omap3-n900.dts
@@ -353,7 +353,7 @@
 	};
 
 	twl_power: power {
-		compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
+		compatible = "ti,twl4030-power-n900";
 		ti,use_poweroff;
 	};
 };
diff --git a/dts/src/arm/r8a7791.dtsi b/dts/src/arm/r8a7791.dtsi
index 8d7ffae..79f68ac 100644
--- a/dts/src/arm/r8a7791.dtsi
+++ b/dts/src/arm/r8a7791.dtsi
@@ -540,9 +540,9 @@
 			#clock-cells = <0>;
 			clock-output-names = "sd1";
 		};
-		sd2_clk: sd3_clk@e615007c {
+		sd2_clk: sd3_clk@e615026c {
 			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe615007c 0 4>;
+			reg = <0 0xe615026c 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
 			clock-output-names = "sd2";
diff --git a/dts/src/arm/ste-nomadik-s8815.dts b/dts/src/arm/ste-nomadik-s8815.dts
index f557feb..90d8b6c 100644
--- a/dts/src/arm/ste-nomadik-s8815.dts
+++ b/dts/src/arm/ste-nomadik-s8815.dts
@@ -4,7 +4,7 @@
  */
 
 /dts-v1/;
-/include/ "ste-nomadik-stn8815.dtsi"
+#include "ste-nomadik-stn8815.dtsi"
 
 / {
 	model = "Calao Systems USB-S8815";
diff --git a/dts/src/arm/ste-nomadik-stn8815.dtsi b/dts/src/arm/ste-nomadik-stn8815.dtsi
index d316c95..dbcf521 100644
--- a/dts/src/arm/ste-nomadik-stn8815.dtsi
+++ b/dts/src/arm/ste-nomadik-stn8815.dtsi
@@ -1,7 +1,9 @@
 /*
  * Device Tree for the ST-Ericsson Nomadik 8815 STn8815 SoC
  */
-/include/ "skeleton.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
 
 / {
 	#address-cells = <1>;
@@ -842,8 +844,7 @@
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
-			cd-gpios = <&gpio3 15 0x1>;
-			cd-inverted;
+			cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
 			vmmc-supply = <&vmmc_regulator>;