diff --git a/arch/arm/boards/animeo_ip/init.c b/arch/arm/boards/animeo_ip/init.c
index ca64d6d..495dc18 100644
--- a/arch/arm/boards/animeo_ip/init.c
+++ b/arch/arm/boards/animeo_ip/init.c
@@ -93,6 +93,7 @@
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.bus_width_16	= 0,
 	.on_flash_bbt	= 1,
 };
diff --git a/arch/arm/boards/pm9261/init.c b/arch/arm/boards/pm9261/init.c
index 09d7f80..63f4f19 100644
--- a/arch/arm/boards/pm9261/init.c
+++ b/arch/arm/boards/pm9261/init.c
@@ -50,6 +50,7 @@
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PA16,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 #if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
diff --git a/arch/arm/boards/pm9263/init.c b/arch/arm/boards/pm9263/init.c
index 3dca9e4..2b6b089 100644
--- a/arch/arm/boards/pm9263/init.c
+++ b/arch/arm/boards/pm9263/init.c
@@ -50,6 +50,7 @@
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PB30,
 	.enable_pin	= AT91_PIN_PD15,
+	.ecc_mode	= NAND_ECC_SOFT,
 #if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
diff --git a/arch/arm/boards/pm9g45/init.c b/arch/arm/boards/pm9g45/init.c
index 1e43be5..524fe53 100644
--- a/arch/arm/boards/pm9g45/init.c
+++ b/arch/arm/boards/pm9g45/init.c
@@ -49,6 +49,7 @@
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PD3,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.bus_width_16	= 0,
 	.on_flash_bbt	= 1,
 };
diff --git a/arch/arm/boards/qil-a926x/init.c b/arch/arm/boards/qil-a926x/init.c
index 99a9604..4f01e2d 100644
--- a/arch/arm/boards/qil-a926x/init.c
+++ b/arch/arm/boards/qil-a926x/init.c
@@ -43,6 +43,7 @@
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.on_flash_bbt	= 1,
 };
 
diff --git a/arch/arm/boards/telit-evk-pro3/init.c b/arch/arm/boards/telit-evk-pro3/init.c
index e094ea7..ea63b1a 100644
--- a/arch/arm/boards/telit-evk-pro3/init.c
+++ b/arch/arm/boards/telit-evk-pro3/init.c
@@ -18,6 +18,7 @@
 #include <gpio.h>
 #include <init.h>
 #include <linux/clk.h>
+#include <linux/mtd/nand.h>
 #include <mach/at91_rstc.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/board.h>
@@ -33,6 +34,7 @@
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.on_flash_bbt	= 1,
 };
 
diff --git a/arch/arm/boards/tny-a926x/init.c b/arch/arm/boards/tny-a926x/init.c
index ac86457..256f8ba 100644
--- a/arch/arm/boards/tny-a926x/init.c
+++ b/arch/arm/boards/tny-a926x/init.c
@@ -55,6 +55,7 @@
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.on_flash_bbt	= 1,
 };
 
diff --git a/arch/arm/boards/usb-a926x/init.c b/arch/arm/boards/usb-a926x/init.c
index 4a28af0..f0e1157 100644
--- a/arch/arm/boards/usb-a926x/init.c
+++ b/arch/arm/boards/usb-a926x/init.c
@@ -59,6 +59,7 @@
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.on_flash_bbt	= 1,
 };