diff --git a/dts/Bindings/ipmi.txt b/dts/Bindings/ipmi.txt
deleted file mode 100644
index d5f1a87..0000000
--- a/dts/Bindings/ipmi.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-IPMI device
-
-Required properties:
-- compatible: should be one of ipmi-kcs, ipmi-smic, or ipmi-bt
-- device_type: should be ipmi
-- reg: Address and length of the register set for the device
-
-Optional properties:
-- interrupts: The interrupt for the device.  Without this the interface
-	is polled.
-- reg-size - The size of the register.  Defaults to 1
-- reg-spacing - The number of bytes between register starts.  Defaults to 1
-- reg-shift - The amount to shift the registers to the right to get the data
-	into bit zero.
-
-Example:
-
-smic@fff3a000 {
-	compatible = "ipmi-smic";
-	device_type = "ipmi";
-	reg = <0xfff3a000 0x1000>;
-	interrupts = <0 24 4>;
-	reg-size = <4>;
-	reg-spacing = <4>;
-};
diff --git a/dts/Bindings/ipmi/aspeed,ast2400-bt-bmc.txt b/dts/Bindings/ipmi/aspeed,ast2400-bt-bmc.txt
new file mode 100644
index 0000000..fbbacd9
--- /dev/null
+++ b/dts/Bindings/ipmi/aspeed,ast2400-bt-bmc.txt
@@ -0,0 +1,23 @@
+* Aspeed BT (Block Transfer) IPMI interface
+
+The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs
+(BaseBoard Management Controllers) and the BT interface can be used to
+perform in-band IPMI communication with their host.
+
+Required properties:
+
+- compatible : should be "aspeed,ast2400-bt-bmc"
+- reg: physical address and size of the registers
+
+Optional properties:
+
+- interrupts: interrupt generated by the BT interface. without an
+  interrupt, the driver will operate in poll mode.
+
+Example:
+
+	ibt@1e789140 {
+		compatible = "aspeed,ast2400-bt-bmc";
+		reg = <0x1e789140 0x18>;
+		interrupts = <8>;
+	};
diff --git a/dts/Bindings/ipmi/ipmi-smic.txt b/dts/Bindings/ipmi/ipmi-smic.txt
new file mode 100644
index 0000000..d5f1a87
--- /dev/null
+++ b/dts/Bindings/ipmi/ipmi-smic.txt
@@ -0,0 +1,25 @@
+IPMI device
+
+Required properties:
+- compatible: should be one of ipmi-kcs, ipmi-smic, or ipmi-bt
+- device_type: should be ipmi
+- reg: Address and length of the register set for the device
+
+Optional properties:
+- interrupts: The interrupt for the device.  Without this the interface
+	is polled.
+- reg-size - The size of the register.  Defaults to 1
+- reg-spacing - The number of bytes between register starts.  Defaults to 1
+- reg-shift - The amount to shift the registers to the right to get the data
+	into bit zero.
+
+Example:
+
+smic@fff3a000 {
+	compatible = "ipmi-smic";
+	device_type = "ipmi";
+	reg = <0xfff3a000 0x1000>;
+	interrupts = <0 24 4>;
+	reg-size = <4>;
+	reg-spacing = <4>;
+};
diff --git a/dts/Bindings/pinctrl/pinctrl-aspeed.txt b/dts/Bindings/pinctrl/pinctrl-aspeed.txt
index 5e60ad1..2ad18c4 100644
--- a/dts/Bindings/pinctrl/pinctrl-aspeed.txt
+++ b/dts/Bindings/pinctrl/pinctrl-aspeed.txt
@@ -43,7 +43,9 @@
 
 GPID0 GPID2 GPIE0 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8
 I2C9 MAC1LINK MDIO1 MDIO2 OSCCLK PEWAKE PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7
-RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8
+RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6
+TIMER7 TIMER8 VGABIOSROM
+
 
 Examples:
 
diff --git a/dts/Bindings/timer/jcore,pit.txt b/dts/Bindings/timer/jcore,pit.txt
new file mode 100644
index 0000000..af5dd35
--- /dev/null
+++ b/dts/Bindings/timer/jcore,pit.txt
@@ -0,0 +1,24 @@
+J-Core Programmable Interval Timer and Clocksource
+
+Required properties:
+
+- compatible: Must be "jcore,pit".
+
+- reg: Memory region(s) for timer/clocksource registers. For SMP,
+  there should be one region per cpu, indexed by the sequential,
+  zero-based hardware cpu number.
+
+- interrupts: An interrupt to assign for the timer. The actual pit
+  core is integrated with the aic and allows the timer interrupt
+  assignment to be programmed by software, but this property is
+  required in order to reserve an interrupt number that doesn't
+  conflict with other devices.
+
+
+Example:
+
+timer@200 {
+	compatible = "jcore,pit";
+	reg = < 0x200 0x30 0x500 0x30 >;
+	interrupts = < 0x48 >;
+};