diff --git a/Documentation/boards/imx/Phytec-phyCORE-i.MX31.rst b/Documentation/boards/imx/Phytec-phyCORE-i.MX31.rst index 527c490..1ea008f 100644 --- a/Documentation/boards/imx/Phytec-phyCORE-i.MX31.rst +++ b/Documentation/boards/imx/Phytec-phyCORE-i.MX31.rst @@ -33,6 +33,6 @@ make ARCH=arm CROSS_COMPILE=armv5compiler -**NOTE** Replace ''armv5compiler'' with your ARM v5 cross compiler, e.g.: ''arm-1136jfs-linux-gnueabi-'' +**NOTE:** replace ''armv5compiler'' with your ARM v5 cross compiler, e.g.: ''arm-1136jfs-linux-gnueabi-'' The resulting binary image to be flashed will be barebox.bin, whereas the file named just barebox is an ELF executable for ARM. diff --git a/Documentation/boards/mxs/Chumby-Falconwing.rst b/Documentation/boards/mxs/Chumby-Falconwing.rst index 73e4c30..4cf4591 100644 --- a/Documentation/boards/mxs/Chumby-Falconwing.rst +++ b/Documentation/boards/mxs/Chumby-Falconwing.rst @@ -26,7 +26,7 @@ make ARCH=arm CROSS_COMPILE=armv5compiler -NOTE replace the armv5compiler with your ARM v5 cross compiler. +**NOTE:** replace the armv5compiler with your ARM v5 cross compiler. How to prepare an MCI card to boot the "chumby one" with barebox ---------------------------------------------------------------- diff --git a/Documentation/boards/mxs/Freescale-i.MX23-evk.rst b/Documentation/boards/mxs/Freescale-i.MX23-evk.rst index b03508c..a2cdc38 100644 --- a/Documentation/boards/mxs/Freescale-i.MX23-evk.rst +++ b/Documentation/boards/mxs/Freescale-i.MX23-evk.rst @@ -25,4 +25,4 @@ make ARCH=arm CROSS_COMPILE=armv5compiler -**NOTE** replace the armv5compiler with your ARM v5 cross compiler. +**NOTE:** replace the armv5compiler with your ARM v5 cross compiler. diff --git a/Documentation/boards/mxs/KaRo-TX28.rst b/Documentation/boards/mxs/KaRo-TX28.rst index a6c308c..85d200b 100644 --- a/Documentation/boards/mxs/KaRo-TX28.rst +++ b/Documentation/boards/mxs/KaRo-TX28.rst @@ -31,9 +31,9 @@ make ARCH=arm CROSS_COMPILE=armv5compiler -**NOTE** replace the armv5compiler with your ARM v5 cross compiler. +**NOTE:** replace the armv5compiler with your ARM v5 cross compiler. -**NOTE** To use the result, you also need the following resources from Freescale: +**NOTE:** to use the result, you also need the following resources from Freescale: * the 'bootlets' archive * the 'elftosb2' encryption tool * in the case you want to start @b barebox from an attached SD card the 'sdimage' tool from Freescale's 'uuc' archive. diff --git a/Documentation/boards/s3c/Digi-a9m2440.rst b/Documentation/boards/s3c/Digi-a9m2440.rst index 4ed8ae4..be3710a 100644 --- a/Documentation/boards/s3c/Digi-a9m2440.rst +++ b/Documentation/boards/s3c/Digi-a9m2440.rst @@ -64,4 +64,4 @@ make ARCH=arm CROSS_COMPILE=armv4compiler -**NOTE** replace the armv4compiler with your ARM v4 cross compiler. +**NOTE:** replace the armv4compiler with your ARM v4 cross compiler. diff --git a/Documentation/boards/tegra.rst b/Documentation/boards/tegra.rst index f28c506..d2d1a25 100644 --- a/Documentation/boards/tegra.rst +++ b/Documentation/boards/tegra.rst @@ -14,7 +14,7 @@ make ARCH=arm tegra_v7_defconfig make ARCH=arm CROSS_COMPILE=arm-v7-compiler- -**NOTE** replace the arm-v7-compiler- with your ARM v7 cross compiler. +**NOTE:** replace the arm-v7-compiler- with your ARM v7 cross compiler. Tegra images are specific to the bootsource. The build will generate images for all combinations of bootsources and supported boards. You can find the @@ -69,7 +69,7 @@ Writing barebox to the primary boot device ------------------------------------------ -**NOTE** This may change in the near future to work with the standard +**NOTE:** this may change in the near future to work with the standard barebox update mechanism (:ref:`update`). Copy the image corresponding to the primary boot device for your board to a diff --git a/Documentation/boards/x86.rst b/Documentation/boards/x86.rst index 5d38955..4e7ccd8 100644 --- a/Documentation/boards/x86.rst +++ b/Documentation/boards/x86.rst @@ -122,7 +122,7 @@ MBR barebox first main image partition -**NOTE** The setupmbr tool is also working on real image file than on device - nodes only. So, there is no restriction what kind of file will be - modified. +**NOTE:** the ``setupmbr`` tool is also working on real image file than on device +nodes only. So, there is no restriction what kind of file will be +modified. diff --git a/Documentation/user/booting-linux.rst b/Documentation/user/booting-linux.rst index 4ae9d1b..17427f3 100644 --- a/Documentation/user/booting-linux.rst +++ b/Documentation/user/booting-linux.rst @@ -48,7 +48,7 @@ global.bootm.image=/path/to/zImage bootm -**NOTE** It may happen that barebox is probed from the devicetree, but you have +**NOTE:** it may happen that barebox is probed from the devicetree, but you have want to start a Kernel without passing a devicetree. In this case call ``oftree -f`` to free the internal devicetree before calling ``bootm`` diff --git a/Documentation/user/driver-model.rst b/Documentation/user/driver-model.rst index 2ec55f1..fae275e 100644 --- a/Documentation/user/driver-model.rst +++ b/Documentation/user/driver-model.rst @@ -87,5 +87,5 @@ barebox@Genesi Efika MX Smartbook:/ echo $? 1 -**HINT** barebox has tab completion for variables. Typing ``eth0.`` +**HINT:** barebox has tab completion for variables. Typing ``eth0.`` will show the parameters for eth0. diff --git a/Documentation/user/networking.rst b/Documentation/user/networking.rst index 9c7bde4..c22685f 100644 --- a/Documentation/user/networking.rst +++ b/Documentation/user/networking.rst @@ -52,7 +52,7 @@ mount -t nfs 192.168.2.1:/export none /mnt -**NOTE** This can often be hidden behind the :ref:`command_automount` command to make +**NOTE:** this can often be hidden behind the :ref:`command_automount` command to make mounting transparent to the user. Network console diff --git a/Documentation/user/pbl.rst b/Documentation/user/pbl.rst index a08d6c9..6757768 100644 --- a/Documentation/user/pbl.rst +++ b/Documentation/user/pbl.rst @@ -26,6 +26,6 @@ case is ``lwl-y += file.o`` which expands to ``obj-y`` when PBL is disabled and to ``pbl-y`` when PBL is enabled. -**HINT** For getting an overview over the binaries, disassemble barebox.bin +**HINT:** for getting an overview over the binaries, disassemble barebox.bin (``make barebox.S``) with or without PBL support and also disassemble the PBL (``make arch/$ARCH/pbl/zbarebox.S``) diff --git a/Documentation/user/ubi.rst b/Documentation/user/ubi.rst index a2e386f..a187680 100644 --- a/Documentation/user/ubi.rst +++ b/Documentation/user/ubi.rst @@ -19,7 +19,7 @@ :ref:`command_erase`. ``ubiformat`` will make sure the erasecounters are preserved and also :ref:`ubi_fastmap` won't work when a flash is erased with ``erase`` -NOTE: When using the :ref:`ubi_fastmap` feature make sure that the UBI is attached and detached +**NOTE:** when using the :ref:`ubi_fastmap` feature make sure that the UBI is attached and detached once after using ``ubiformat``. This makes sure the Fastmap is written. After a device has been formatted it can be attached with :ref:`command_ubiattach`. diff --git a/Documentation/user/variables.rst b/Documentation/user/variables.rst index 04e1791..e349874 100644 --- a/Documentation/user/variables.rst +++ b/Documentation/user/variables.rst @@ -18,7 +18,7 @@ global myvar1=foobar -**NOTE** creating a variable with ``global myvar1=foobar`` looks very similar +**NOTE:** creating a variable with ``global myvar1=foobar`` looks very similar to assigning a value with ``global.myvar1=foobar``, but the latter fails when a variable has not been created before.