diff --git a/CHANGELOG b/CHANGELOG index 343080c..6d3bb93 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,8 @@ Changes for U-Boot 1.1.3: ====================================================================== +* Cleanup build problems on 64 bit build hosts + * Update MAINTAINERS file * Patch by Stefan Roese, 01 Aug 2005: diff --git a/MAINTAINERS b/MAINTAINERS index 0bcad8e..0fff4f6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -129,6 +129,34 @@ AmigaOneG3SE MPC7xx +Matthias Fuchs + + ADCIOP IOP480 (PPC401) + APC405 PPC405GP + AR405 PPC405GP + ASH405 PPC405EP + CANBT PPC405CR + CPCI405 PPC405GP + CPCI4052 PPC405GP + CPCI405AB PPC405GP + CPCI405DT PPC405GP + CPCI440 PPC440GP + CPCIISER4 PPC405GP + DASA_SIM IOP480 (PPC401) + DP405 PPC405EP + DU405 PPC405GP + G2000 PPC405EP + HH405 PPC405EP + HUB405 PPC405EP + OCRTC PPC405GP + ORSG PPC405GP + PCI405 PPC405GP + PLU405 PPC405EP + PMC405 PPC405GP + VOH405 PPC405EP + VOM405 PPC405EP + WUH405 PPC405EP + Frank Gottschling MHPC MPC8xx @@ -168,10 +196,6 @@ debris MPC8245 -Nye Liu - - ZUMA MPC7xx_74xx - Thomas Lange GTH MPC860 @@ -180,6 +204,21 @@ ELPT860 MPC860T +Nye Liu + + ZUMA MPC7xx_74xx + +Jon Loeliger + + MPC8540ADS MPC8540 + MPC8560ADS MPC8560 + MPC8541CDS MPC8541 + MPC8555CDS MPC8555 + +Dan Malek + + STxGP3 MPC85xx + Eran Man EVB64260_750CX MPC750CX @@ -194,6 +233,7 @@ TOP5200 MPC5200 Tolunay Orkun + csb272 PPC405GP csb472 PPC405GP @@ -202,17 +242,6 @@ GEN860T MPC860T GEN860T_SC MPC860T -Stefan Roese - - bamboo PPC440EP - bunbinga PPC405EP - ebony PPC440GP - ocotea PPC440GX - sycamore PPC405GPr - walnut PPC405GP - yellowstone PPC440GR - yosemite PPC440EP - Frank Panno ep8260 MPC8260 @@ -234,33 +263,20 @@ sbc8240 MPC8240 sbc405 PPC405GP -Matthias Fuchs +Stefan Roese - ADCIOP IOP480 (PPC401) - APC405 PPC405GP - AR405 PPC405GP - ASH405 PPC405EP - CANBT PPC405CR - CPCI405 PPC405GP - CPCI4052 PPC405GP - CPCI405AB PPC405GP - CPCI405DT PPC405GP - CPCI440 PPC440GP - CPCIISER4 PPC405GP - DASA_SIM IOP480 (PPC401) - DP405 PPC405EP - DU405 PPC405GP - G2000 PPC405EP - HH405 PPC405EP - HUB405 PPC405EP - OCRTC PPC405GP - ORSG PPC405GP - PCI405 PPC405GP - PLU405 PPC405EP - PMC405 PPC405GP - VOH405 PPC405EP - VOM405 PPC405EP - WUH405 PPC405EP + bamboo PPC440EP + bunbinga PPC405EP + ebony PPC440GP + ocotea PPC440GX + sycamore PPC405GPr + walnut PPC405GP + yellowstone PPC440GR + yosemite PPC440EP + +Yusdi Santoso + + HIDDEN_DRAGON MPC8241/MPC8245 Travis Sawyer (travis.sawyer@sandburst.com> @@ -297,21 +313,6 @@ svm_sc8xx MPC8xx -Jon Loeliger - - MPC8540ADS MPC8540 - MPC8560ADS MPC8560 - MPC8541CDS MPC8541 - MPC8555CDS MPC8555 - -Dan Malek - - STxGP3 MPC85xx - -Yusdi Santoso - - HIDDEN_DRAGON MPC8241/MPC8245 - ------------------------------------------------------------------------- Unknown / orphaned boards: @@ -346,6 +347,10 @@ # Board CPU # ######################################################################### +Rishi Bhattacharya + + omap5912osk ARM926EJS + George G. Davis assabet SA1100 @@ -364,6 +369,11 @@ impa7 ARM720T (EP7211) ep7312 ARM720T (EP7312) +Kshitij Gupta + + omap1510inn ARM925T + omap1610inn ARM926EJS + Kyle Harris lubbock xscale @@ -375,29 +385,13 @@ smdk2400 ARM920T trab ARM920T -Prakash Kumar - - cerf250 xscale - -Kshitij Gupta - - omap1510inn ARM925T - omap1610inn ARM926EJS - -Dave Peverley - omap730p2 ARM926EJS - Nishant Kamat omap1610h2 ARM926EJS -Rishi Bhattacharya +Prakash Kumar - omap5912osk ARM926EJS - -Richard Woodruff - - omap2420h4 ARM1136EJS + cerf250 xscale David M�ller @@ -408,6 +402,10 @@ shannon SA1100 +Dave Peverley + + omap730p2 ARM926EJS + Robert Schwebel csb226 xscale @@ -415,7 +413,7 @@ Andrea Scian - B2 ARM7TDMI (S3C44B0X) + B2 ARM7TDMI (S3C44B0X) Greg Ungerer @@ -423,6 +421,10 @@ cm4116 ks8695p cm4148 ks8695p +Richard Woodruff + + omap2420h4 ARM1136EJS + Alex Z�pke lart SA1100 diff --git a/Makefile b/Makefile index d23a6dd..b24b26d 100644 --- a/Makefile +++ b/Makefile @@ -881,15 +881,14 @@ ######################################################################### ## MPC8220 Systems ######################################################################### -Alaska8220_config: unconfig + +Alaska8220_config \ +Yukon8220_config: unconfig @./mkconfig $(@:_config=) ppc mpc8220 alaska sorcery_config: unconfig @./mkconfig $(@:_config=) ppc mpc8220 sorcery -Yukon8220_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8220 yukon - ######################################################################### ## MPC824x Systems ######################################################################### diff --git a/board/amcc/yellowstone/flash.c b/board/amcc/yellowstone/flash.c index 99fcfb5..cd6a2e6 100644 --- a/board/amcc/yellowstone/flash.c +++ b/board/amcc/yellowstone/flash.c @@ -329,7 +329,6 @@ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]); volatile FLASH_WORD_SIZE *addr2; int flag, prot, sect, l_sect; - int i; if ((s_first < 0) || (s_first > s_last)) { if (info->flash_id == FLASH_UNKNOWN) { @@ -517,7 +516,7 @@ */ static int write_word(flash_info_t * info, ulong dest, ulong data) { - volatile vu_long *addr2 = (vu_long *) (info->start[0]); + vu_long *addr2 = (vu_long *) (info->start[0]); volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest; volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data; ulong start; diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c index 840a46c..a6b81e6 100644 --- a/board/amcc/yellowstone/yellowstone.c +++ b/board/amcc/yellowstone/yellowstone.c @@ -315,10 +315,6 @@ #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { - u16 cmdstat; - - DECLARE_GLOBAL_DATA_PTR; - /*--------------------------------------------------------------------------+ * Set up Direct MMIO registers *--------------------------------------------------------------------------*/ diff --git a/common/environment.c b/common/environment.c index 61a8d24..c7f54c6 100644 --- a/common/environment.c +++ b/common/environment.c @@ -21,7 +21,12 @@ * MA 02111-1307 USA */ +#ifndef __ASSEMBLY__ +#define __ASSEMBLY__ /* Dirty trick to get only #defines */ +#endif +#define __ASM_STUB_PROCESSOR_H__ /* don't include asm/processor. */ #include +#undef __ASSEMBLY__ #include /* diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h new file mode 100644 index 0000000..2d3c0e5 --- /dev/null +++ b/include/configs/Yukon8220.h @@ -0,0 +1,317 @@ +/* + * (C) Copyright 2004 + * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MPC8220 1 +#define CONFIG_YUKON8220 1 /* ... on Yukon board */ + +/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to + determine the CPU speed. */ +#define CFG_MPC8220_CLKIN 30000000/* ... running at 30MHz */ +#define CFG_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ + +/* Define this for PSC console +#define CONFIG_PSC_CONSOLE 1 +*/ + +#define CONFIG_EXTUART_CONSOLE 1 + +#ifdef CONFIG_EXTUART_CONSOLE +# define CONFIG_CONS_INDEX 1 +# define CFG_NS16550_SERIAL +# define CFG_NS16550 +# define CFG_NS16550_REG_SIZE 1 +# define CFG_NS16550_COM1 (CFG_CPLD_BASE + 0x1008) +# define CFG_NS16550_CLK 18432000 +#endif + +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* + * Supported commands + */ +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_BOOTD | \ + CFG_CMD_CACHE | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM | \ + CFG_CMD_SNTP ) + +#define CONFIG_NET_MULTI + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_BOOTARGS "root=/dev/ram rw" +#define CONFIG_ETHADDR 00:e0:0c:bc:e0:60 +#define CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:e0:0c:bc:e0:61 +#define CONFIG_IPADDR 192.162.1.2 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_SERVERIP 192.162.1.1 +#define CONFIG_GATEWAYIP 192.162.1.1 +#define CONFIG_HOSTNAME yukon +#define CONFIG_OVERWRITE_ETHADDR_ONCE + + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 +#define CFG_I2C_MODULE 1 + +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * EEPROM configuration + */ +#define CFG_I2C_EEPROM_ADDR 0x52 /* 1011000xb */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70 +/* +#define CFG_ENV_IS_IN_EEPROM 1 +#define CFG_ENV_OFFSET 0 +#define CFG_ENV_SIZE 256 +*/ + +/* If CFG_AMD_BOOT is defined, the the system will boot from AMD. + else undefined it will boot from Intel Strata flash */ +#define CFG_AMD_BOOT 1 + +/* + * Flexbus Chipselect configuration + */ +#if defined (CFG_AMD_BOOT) +#define CFG_CS0_BASE 0xfff0 +#define CFG_CS0_MASK 0x00080000 /* 512 KB */ +#define CFG_CS0_CTRL 0x003f0d40 + +#define CFG_CS1_BASE 0xfe00 +#define CFG_CS1_MASK 0x01000000 /* 16 MB */ +#define CFG_CS1_CTRL 0x003f1540 +#else +#define CFG_CS0_BASE 0xff00 +#define CFG_CS0_MASK 0x01000000 /* 16 MB */ +#define CFG_CS0_CTRL 0x003f1540 + +#define CFG_CS1_BASE 0xfe08 +#define CFG_CS1_MASK 0x00080000 /* 512 KB */ +#define CFG_CS1_CTRL 0x003f0d40 +#endif + +#define CFG_CS2_BASE 0xf100 +#define CFG_CS2_MASK 0x00040000 +#define CFG_CS2_CTRL 0x003f1140 + +#define CFG_CS3_BASE 0xf200 +#define CFG_CS3_MASK 0x00040000 +#define CFG_CS3_CTRL 0x003f1100 + + +#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16) +#define CFG_FLASH1_BASE (CFG_CS1_BASE << 16) + +#if defined (CFG_AMD_BOOT) +#define CFG_AMD_BASE CFG_FLASH0_BASE +#define CFG_INTEL_BASE CFG_FLASH1_BASE + 0xf00000 +#define CFG_FLASH_BASE CFG_AMD_BASE +#else +#define CFG_INTEL_BASE CFG_FLASH0_BASE + 0xf00000 +#define CFG_AMD_BASE CFG_FLASH1_BASE +#define CFG_FLASH_BASE CFG_INTEL_BASE +#endif + +#define CFG_CPLD_BASE (CFG_CS2_BASE << 16) +#define CFG_FPGA_BASE (CFG_CS3_BASE << 16) + + +#define CFG_MAX_FLASH_BANKS 4 /* max num of memory banks */ +#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */ + +#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ +#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ +#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ +#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ + +#define PHYS_AMD_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */ +#define PHYS_INTEL_SECT_SIZE 0x00020000 /* 128 KB sectors (x2) */ + +#define CFG_FLASH_CHECKSUM +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#if defined (CFG_AMD_BOOT) +#define CFG_ENV_ADDR (CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_AMD_SECT_SIZE) +#define CFG_ENV_SIZE PHYS_AMD_SECT_SIZE +#define CFG_ENV_SECT_SIZE PHYS_AMD_SECT_SIZE +#define CFG_ENV1_ADDR (CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_INTEL_SECT_SIZE) +#define CFG_ENV1_SIZE PHYS_INTEL_SECT_SIZE +#define CFG_ENV1_SECT_SIZE PHYS_INTEL_SECT_SIZE +#else +#define CFG_ENV_ADDR (CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_INTEL_SECT_SIZE) +#define CFG_ENV_SIZE PHYS_INTEL_SECT_SIZE +#define CFG_ENV_SECT_SIZE PHYS_INTEL_SECT_SIZE +#define CFG_ENV1_ADDR (CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_AMD_SECT_SIZE) +#define CFG_ENV1_SIZE PHYS_AMD_SECT_SIZE +#define CFG_ENV1_SECT_SIZE PHYS_AMD_SECT_SIZE +#endif + +#define CONFIG_ENV_OVERWRITE 1 + +#if defined CFG_ENV_IS_IN_FLASH +#undef CFG_ENV_IS_IN_NVRAM +#undef CFG_ENV_IS_IN_EEPROM +#elif defined CFG_ENV_IS_IN_NVRAM +#undef CFG_ENV_IS_IN_FLASH +#undef CFG_ENV_IS_IN_EEPROM +#elif defined CFG_ENV_IS_IN_EEPROM +#undef CFG_ENV_IS_IN_NVRAM +#undef CFG_ENV_IS_IN_FLASH +#endif + +#ifndef CFG_JFFS2_FIRST_SECTOR +#define CFG_JFFS2_FIRST_SECTOR 0 +#endif +#ifndef CFG_JFFS2_FIRST_BANK +#define CFG_JFFS2_FIRST_BANK 0 +#endif +#ifndef CFG_JFFS2_NUM_BANKS +#define CFG_JFFS2_NUM_BANKS 1 +#endif +#define CFG_JFFS2_LAST_BANK (CFG_JFFS2_FIRST_BANK + CFG_JFFS2_NUM_BANKS - 1) + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 +#define CFG_SRAM_BASE (CFG_MBAR + 0x20000) +#define CFG_SRAM_SIZE 0x8000 + +/* Use SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR (CFG_MBAR + 0x20000) +#define CFG_INIT_RAM_END 0x8000 /* End of used area in DPRAM */ + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* SDRAM configuration */ +#define CFG_SDRAM_TOTAL_BANKS 2 +#define CFG_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */ +#define CFG_SDRAM_SPD_SIZE 0x40 +#define CFG_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */ + +/* SDRAM drive strength register */ +#define CFG_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \ + (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \ + (DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \ + (DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \ + (DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT)) + +/* + * Ethernet configuration + */ +#define CONFIG_MPC8220_FEC 1 +#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ +#define CONFIG_PHY_ADDR 0x18 + + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Various low-level settings + */ +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE + +#endif /* __CONFIG_H */ diff --git a/tools/envcrc.c b/tools/envcrc.c index 5f13a63..7b77183 100644 --- a/tools/envcrc.c +++ b/tools/envcrc.c @@ -25,7 +25,10 @@ #include #include -#define __ASSEMBLY__ /* Dirty trick to get only #defines */ +#ifndef __ASSEMBLY__ +#define __ASSEMBLY__ /* Dirty trick to get only #defines */ +#endif +#define __ASM_STUB_PROCESSOR_H__ /* don't include asm/processor. */ #include #undef __ASSEMBLY__ @@ -73,24 +76,24 @@ int main (int argc, char **argv) { #ifdef ENV_IS_EMBEDDED - int crc ; - unsigned char *envptr = &environment, - *dataptr = envptr + ENV_HEADER_SIZE; - unsigned int datasize = ENV_SIZE; + int crc; + unsigned char *envptr = &environment, + *dataptr = envptr + ENV_HEADER_SIZE; + unsigned int datasize = ENV_SIZE; - crc = crc32(0, dataptr, datasize) ; + crc = crc32 (0, dataptr, datasize); - /* Check if verbose mode is activated passing a parameter to the program */ - if (argc > 1) { - printf("CRC32 from offset %08X to %08X of environment = %08X\n", - (unsigned int)(dataptr - envptr), - (unsigned int)(dataptr - envptr) + datasize, - crc); - } else { - printf("0x%08X\n", crc); - } + /* Check if verbose mode is activated passing a parameter to the program */ + if (argc > 1) { + printf ("CRC32 from offset %08X to %08X of environment = %08X\n", + (unsigned int) (dataptr - envptr), + (unsigned int) (dataptr - envptr) + datasize, + crc); + } else { + printf ("0x%08X\n", crc); + } #else - printf("0\n"); + printf ("0\n"); #endif - return EXIT_SUCCESS; + return EXIT_SUCCESS; }