diff --git a/dts/Bindings/net/micrel-ksz90x1.txt b/dts/Bindings/net/micrel-ksz90x1.txt
index 42a2483..e22d8cf 100644
--- a/dts/Bindings/net/micrel-ksz90x1.txt
+++ b/dts/Bindings/net/micrel-ksz90x1.txt
@@ -57,6 +57,13 @@
       - txd2-skew-ps : Skew control of TX data 2 pad
       - txd3-skew-ps : Skew control of TX data 3 pad
 
+    - micrel,force-master:
+        Boolean, force phy to master mode. Only set this option if the phy
+        reference clock provided at CLK125_NDO pin is used as MAC reference
+        clock because the clock jitter in slave mode is to high (errata#2).
+        Attention: The link partner must be configurable as slave otherwise
+        no link will be established.
+
 Examples:
 
 	mdio {
diff --git a/dts/src/arm/sun4i-a10.dtsi b/dts/src/arm/sun4i-a10.dtsi
index 77e8436..3a1c6b4 100644
--- a/dts/src/arm/sun4i-a10.dtsi
+++ b/dts/src/arm/sun4i-a10.dtsi
@@ -76,7 +76,7 @@
 			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
 			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
 				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
-				 <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
 				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>,
 				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
 			status = "disabled";
@@ -88,7 +88,7 @@
 			allwinner,pipeline = "de_fe0-de_be0-lcd0";
 			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
 				 <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>,
-				 <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH0>,
 				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
 			status = "disabled";
 		};
@@ -99,7 +99,7 @@
 			allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
 			clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
 				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
-				 <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
 				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>,
 				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
 			status = "disabled";
diff --git a/dts/src/arm/sun8i-h3-orangepi-one.dts b/dts/src/arm/sun8i-h3-orangepi-one.dts
index 3328fe5..232f124 100644
--- a/dts/src/arm/sun8i-h3-orangepi-one.dts
+++ b/dts/src/arm/sun8i-h3-orangepi-one.dts
@@ -117,6 +117,7 @@
 	phy-handle = <&int_mii_phy>;
 	phy-mode = "mii";
 	allwinner,leds-active-low;
+	status = "okay";
 };
 
 &hdmi {
diff --git a/dts/src/arm/sun8i-v3s-licheepi-zero-dock.dts b/dts/src/arm/sun8i-v3s-licheepi-zero-dock.dts
index d131109..ad17360 100644
--- a/dts/src/arm/sun8i-v3s-licheepi-zero-dock.dts
+++ b/dts/src/arm/sun8i-v3s-licheepi-zero-dock.dts
@@ -51,7 +51,7 @@
 
 	leds {
 		/* The LEDs use PG0~2 pins, which conflict with MMC1 */
-		status = "disbaled";
+		status = "disabled";
 	};
 };
 
diff --git a/dts/src/arm64/hisilicon/hi6220-hikey.dts b/dts/src/arm64/hisilicon/hi6220-hikey.dts
index 724a0d3..edb4ee0 100644
--- a/dts/src/arm64/hisilicon/hi6220-hikey.dts
+++ b/dts/src/arm64/hisilicon/hi6220-hikey.dts
@@ -299,7 +299,6 @@
 		/* GPIO blocks 16 thru 19 do not appear to be routed to pins */
 
 		dwmmc_0: dwmmc0@f723d000 {
-			max-frequency = <150000000>;
 			cap-mmc-highspeed;
 			mmc-hs200-1_8v;
 			non-removable;