diff --git a/arch/arm/boards/tny-a926x/init.c b/arch/arm/boards/tny-a926x/init.c
index 2065eae..eeaca76 100644
--- a/arch/arm/boards/tny-a926x/init.c
+++ b/arch/arm/boards/tny-a926x/init.c
@@ -121,42 +121,10 @@
 	.phy_addr	= 0,
 };
 
-static void tny_a9260_phy_reset(void)
-{
-	unsigned long rstc;
-	struct clk *clk = clk_get(NULL, "macb_clk");
-
-	clk_enable(clk);
-
-	at91_set_gpio_input(AT91_PIN_PA14, 0);
-	at91_set_gpio_input(AT91_PIN_PA15, 0);
-	at91_set_gpio_input(AT91_PIN_PA17, 0);
-	at91_set_gpio_input(AT91_PIN_PA25, 0);
-	at91_set_gpio_input(AT91_PIN_PA26, 0);
-	at91_set_gpio_input(AT91_PIN_PA28, 0);
-
-	rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL;
-
-	/* Need to reset PHY -> 500ms reset */
-	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
-				     (AT91_RSTC_ERSTL & (0x0d << 8)) |
-				     AT91_RSTC_URSTEN);
-
-	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
-
-	/* Wait for end hardware reset */
-	while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
-
-	/* Restore NRST value */
-	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
-				     (rstc) |
-				     AT91_RSTC_URSTEN);
-}
-
 static void __init ek_add_device_macb(void)
 {
-	tny_a9260_phy_reset();
-	at91_add_device_eth(0, &macb_pdata);
+	if (IS_ENABLED(CONFIG_CALAO_MOB_TNY_MD2))
+		at91_add_device_eth(0, &macb_pdata);
 }
 #else
 static void __init ek_add_device_macb(void) {}
@@ -240,6 +208,8 @@
 static int tny_a9260_console_init(void)
 {
 	at91_register_uart(0, 0);
+	if (IS_ENABLED(CONFIG_CALAO_MOB_TNY_MD2))
+		at91_register_uart(2, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	return 0;
 }
 console_initcall(tny_a9260_console_init);
diff --git a/arch/arm/configs/tny_a9260_defconfig b/arch/arm/configs/tny_a9260_defconfig
index 52bd7e4..2388305 100644
--- a/arch/arm/configs/tny_a9260_defconfig
+++ b/arch/arm/configs/tny_a9260_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARCH_AT91SAM9260=y
 CONFIG_MACH_TNY_A9260=y
+CONFIG_CALAO_MOB_TNY_MD2=y
 CONFIG_AEABI=y
 # CONFIG_CMD_ARM_CPUINFO is not set
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
@@ -33,7 +34,6 @@
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_SHA1SUM=y
-CONFIG_CMD_SHA256SUM=y
 CONFIG_CMD_MTEST=y
 CONFIG_CMD_MTEST_ALTERNATIVE=y
 CONFIG_CMD_FLASH=y
diff --git a/arch/arm/configs/tny_a9263_defconfig b/arch/arm/configs/tny_a9263_defconfig
index 1c316c8..d1bc418 100644
--- a/arch/arm/configs/tny_a9263_defconfig
+++ b/arch/arm/configs/tny_a9263_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARCH_AT91SAM9263=y
 CONFIG_MACH_TNY_A9263=y
+CONFIG_CALAO_MOB_TNY_MD2=y
 CONFIG_AEABI=y
 # CONFIG_CMD_ARM_CPUINFO is not set
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
@@ -33,7 +34,6 @@
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_SHA1SUM=y
-CONFIG_CMD_SHA256SUM=y
 CONFIG_CMD_MTEST=y
 CONFIG_CMD_MTEST_ALTERNATIVE=y
 CONFIG_CMD_FLASH=y
diff --git a/arch/arm/configs/tny_a9g20_defconfig b/arch/arm/configs/tny_a9g20_defconfig
index f842382..983c68a 100644
--- a/arch/arm/configs/tny_a9g20_defconfig
+++ b/arch/arm/configs/tny_a9g20_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARCH_AT91SAM9G20=y
 CONFIG_MACH_TNY_A9G20=y
+CONFIG_CALAO_MOB_TNY_MD2=y
 CONFIG_AEABI=y
 # CONFIG_CMD_ARM_CPUINFO is not set
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
@@ -33,7 +34,6 @@
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_SHA1SUM=y
-CONFIG_CMD_SHA256SUM=y
 CONFIG_CMD_MTEST=y
 CONFIG_CMD_MTEST_ALTERNATIVE=y
 CONFIG_CMD_FLASH=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 989d3d8..1bec3e5 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -104,6 +104,9 @@
 config SUPPORT_CALAO_DAB_MMX
 	bool
 
+config SUPPORT_CALAO_MOB_TNY_MD2
+	bool
+
 # ----------------------------------------------------------
 
 if ARCH_AT91RM9200
@@ -138,6 +141,7 @@
 
 config MACH_TNY_A9260
 	bool "CALAO TNY-A9260"
+	select SUPPORT_CALAO_MOB_TNY_MD2
 	help
 	  Select this if you are using a Calao Systems TNY-A9260.
 	  <http://www.calao-systems.com>
@@ -214,6 +218,7 @@
 	  that embeds only one SD/MMC slot.
 
 config MACH_TNY_A9G20
+	select SUPPORT_CALAO_MOB_TNY_MD2
 	bool "CALAO TNY-A9G20"
 	help
 	  Select this if you are using a Calao Systems TNY-A9G20.
@@ -264,6 +269,7 @@
 
 config MACH_TNY_A9263
 	bool "CALAO TNY-A9263"
+	select SUPPORT_CALAO_MOB_TNY_MD2
 	help
 	  Select this if you are using a Calao Systems TNY-A9263.
 	  <http://www.calao-systems.com>
@@ -362,4 +368,8 @@
 	bool "DAB MMX Daughter Board support"
 	depends on SUPPORT_CALAO_DAB_MMX
 
+config CALAO_MOB_TNY_MD2
+	bool "MOB TNY MD2 Motherboard Daughter Board support"
+	depends on SUPPORT_CALAO_MOB_TNY_MD2
+
 endif