External buildroot tree for stm32f769 discovery board
This repository provides an external buildroot tree to be used with at least buildroot 2021.02 for the stm32f769 discovery board from STMicroelectronics.
It builds a minimal operating system for the target:
- Das U-Boot bootloader.
- Minimal Linux kernel.
- Very small userspace (minimal busybox).
The current configuration is built using a prebuilt toolchain from Bootlin to accelerate the build.
How to build
First install Buildroot's required dependencies. See: The buildroot user manual, chapter 2: System requirements
Then set up the required source code:
mkdir STM32F769DISCO && cd STM32F769DISCO
tar -xf buildroot-2021.02.7.tar.gz
mv buildroot-2021.02.7 buildroot
git clone 'https://git.lumina-sensum.com/git/LuminaSensum/buildroot-stm32f769-disco.git'
Build the image:
make O=output_build stm32f769-disco_defconfig
To flash the bootloader, run the provided flash.sh script which is located in the external tree:
Installing the operating system
During build, buildroot creates the sdcard.img file inside the images directory, which you can then simply burn onto a micro sd card using dd:
sudo dd if=buildroot-stm32f769-disco/output_build/images/sdcard.img of=/dev/sdX
- This will destroy any data stored on the micro sd card!
- Replace sdX with the correct device node name for your micro sd card!