LWIP::get_ip_addr: Prefer IPv4 over IPv6 link local addresses ...

When IPv6 is prefered it will choose a link local address on a network
that lacks IPv6 over a working IPv4 network, breaking networking.
Change this behaviour to prefer a link local address only as a last
resort.

This also changes LWIP::get_ipv6_addr to not return link local
addresses. Use get_ipv6_link_local_addr instead for this.

HACK: Use a packet size of 512 for USBMSD. ...

This is what the ST USBPhy code requires when using HS OTG.

Synchronize upstream changes - May 2023 edition (#160) ...

* fix STM32L1 FLASH_SIZE for cat.3 devices with DEV_ID 0x436

* Fix mesh connect semaphore not releasing causing blockage

* Add support of NSAPI_ICMP sockets in Nanostack

* STM32F1: add MCU_STM32F103xD support

* STM32F1: add MCU_STM32F103xG support

* test: Disable failing tests due to echo server

Some tests are failing as echo.mbedcloudtesting.com is not serving TLS
requests anymore.

Signed-off-by: Saheer Babu <saheer.babu@arm.com>

* Check CAN DLC length value

* Fix default interface ID only being used partially

If user sets the default interface ID for a socket (e.g. using setsockopt
with SOCKET_INTERFACE_SELECT), the default interface should take over
other interface selection mechanisms as a interface is bound to the socket.
This applies for both IPv6 local and global scopes for unicast messages
but not for multicast messages as these are bound to a multicast interface
using SOCKET_IPV6_MULTICAST_IF socket option.

* Targets: NXP: IMXRT: Fixed GCC_ARM lds syntax.

Signed-off-by: Yilin Sun <imi415@imi.moe>

* CAN: read only up to 8 bytes

If HAL implementation writes more than 8 bytes of data, error immediately.
CANMessage defines only 8 bytes of data, lenght cannot be > 8.

This fixes https://github.com/ARMmbed/mbed-os/issues/15361

Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>

* STM32F303xC: add RAM_CCM in GCC linker script

* fix(drivers/emac): Remove incorrect RMII RX ER initialization

* fix(drivers/emac): Add missing SPDX indetifier to ST driver files

* fixed compiler inline issue

* Update Mbed version block

* removed HSE speed limitation for STM32G431RB

* Added HSE range validation for STM32g431xB

* added support for 4, 8 and 16MHz

* M487: Remove unused variable 'u32EscapeFrame'

Remove unused variable 'u32EscapeFrame' in BSP m480_ccap.h to avoid warnings

* force FIFO IRQ for FDCan RX on H7

* Add hardware CRC support to STM32G4

* add support for Nucleo-H745ZI

* Update MAX32670 peripheral drivers with final ones that use by SDK

Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>

* MAX32670 apply mbed required changes on peripheral drivers

Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>

* M467: Support CAN bus

1.  Update BSP CANFD driver
2.  Notes for implementation
    (1) Each CANFD instance supports two IRQ lines. Use only line 0. Line 1 is not used.
    (2) For Rx disabling multiple filter handles,
        1)  Map all filter handles to filter handle 0
        2)  Use Rx FIFO 0 for filter handle 0
    (3) For Rx enabling multiple filter handles,
        1)  Use Rx FIFO 0 for filter handle 0
        2)  Use Rx FIFO 1 for filter handle through first invoking can_filter()
        3)  Use dedicated Rx Buffer for other filter handles
        NOTE: H/W supports mask on Rx FIFO 0/1 but not on dedicated Rx Buffer.
    (4) For Tx, use only dedicated Tx Buffer. BSP CANFD driver doesn't support Tx FIFO/Queue.
    (5) Support no CAN FD.

* Fix 'new[]' array freed with 'delete'

The array _scratch_buf is allocated using new[] in line 761 of
mbed-os/storage/kvstore/securestore/source/SecureStore.cpp.
But it was freed using delete.

* Define default parameters of functions of derived class the same as the base class

The member function bringup() of class ThreadInterface redefines
parameter stack's default value to IPV6_STACK from the inherited default value
DEFAULT_STACK (in Interface).
The default value will be resolved statically, not by dispatch, so this
can cause confusion.
Similar arguments apply to LoWPANNDInterface and WisunInterface.

* Avoid calling virtual functions from constructors and destructors

Virtual functions are resolved statically (not dynamically) in
constructors and destructors for the same class. The call should be made
explicitly static by qualifying it using the scope resolution operator.

* Fix potentially overrunning write of sprintf

Format string "%d" requires 12 bytes (including the null terminator).
Also, use snprintf instead of sprintf to prevent buffer overflow.

* Fix system_clock.c location

Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>

* Fix variable name

Signed-off-by: Jasper <jasper.jonker@wingtra.com>

* Change storage-class of secret_buf to static

Storing the address of a local variable (`secret_buf`)
in non-local memory (`prf_ptr->secret`) can cause a
dangling pointer bug if the address is used after the function returns.

* fix compiling errors of FATFileSystem when exFAT was enabled

* Add OSPI support for STM32H7

* Nuvoton: Enable extending sampling time for ADC/EADC

For all Nuvoton targets, enable extending sampling time in ADC/EADC clocks on per-pin basis.

---------

Signed-off-by: Saheer Babu <saheer.babu@arm.com>
Signed-off-by: Yilin Sun <imi415@imi.moe>
Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>
Signed-off-by: Jasper <jasper.jonker@wingtra.com>
Co-authored-by: caodd <caodd1993@qq.com>
Co-authored-by: YannCharbon <yann.charbon@ik.me>
Co-authored-by: Jerome Coutant <jerome.coutant@st.com>
Co-authored-by: Saheer Babu <saheer.babu@arm.com>
Co-authored-by: Martyx00 <martin.petran@protonmail.com>
Co-authored-by: Yilin Sun <imi415@imi.moe>
Co-authored-by: Martin Kojtal <martin.kojtal@arm.com>
Co-authored-by: akiroz <akiroz.vectis@gmail.com>
Co-authored-by: Charles <hallard04@free.fr>
Co-authored-by: Leonard Chiang <leochiang2002@gmail.com>
Co-authored-by: Chun-Chieh Li <ccli8@nuvoton.com>
Co-authored-by: jmcloud <jmcloud@tesla.com>
Co-authored-by: Augusto Zanellato <augusto.zanellato@gmail.com>
Co-authored-by: Sadik.Ozer <sadik.ozer@analog.com>
Co-authored-by: Mingjie Shen <shen497@purdue.edu>
Co-authored-by: Jasper Jonker <jasper.jonker@wingtra.com>
Co-authored-by: wdx04 <wdx04@outlook.com>

Remove all source files exclusive to Arm Compiler and IAR (#159) ...

* Remove all source files exclusive to Arm Compiler and IAR

* Also remove 'TOOLCHAIN_ARM'

* Remove targets.json entries for ARM and IAR

More fixes for sleep and clocking stuff on MIMXRT105x (#158) ...

* More fixes for sleep and clocking stuff on MIMXRT105x

* Fix a couple of inadvertent changes

Refactor MIMXRT105x target labels and linker script, locate general data in DTCM memory instead of OCRAM for improved performance (#157)

Bugfix: LPC1768 IAP could not copy flash to flash (#156) ...

* Bugfix: LPC1768 IAP could not copy flash to flash

* Add flash to flash test for flash API

* Fix style

* Style again

* Augh again

STM32 I2C v2 HAL: Fix repeated starts in transaction mode (#153) ...

* Try and fix repeated start for transactional I2C API

* Use OTHER_FRAME everywhere

Add STM32F103xD and xG entries in CMakeLists.txt (#155) ...

* Add STM32F103xD, STM32F103xG series and fix STM32F103xE startup file

* Add system_clock.c file for STM32F103xD series

* Add STM32F103xD and STM32F103xG to targets.json

* Update CMakeLists.txt to add STM32F103xD and STM32F103xG series

add_subdirectory(TARGET_STM32F103xD EXCLUDE_FROM_ALL)
add_subdirectory(TARGET_STM32F103xG EXCLUDE_FROM_ALL)

* Add remaps for STM32F1 timers as in original mbed-os

Added extra remaps for timers 9 to 14 for STM32F1 needed in STM32F103xG series

#define AFIO_REMAP_TIM9_ENABLE    17
#define AFIO_REMAP_TIM10_ENABLE   18
#define AFIO_REMAP_TIM11_ENABLE   19
#define AFIO_REMAP_TIM13_ENABLE   20
#define AFIO_REMAP_TIM14_ENABLE   21

---------

Co-authored-by: Perez <maperez@hp.com>

I2C pinmap and HAL fixes for MIMXRT (#150) ...

* Start fixing up I2C on MIMXRT

* Fix typod peripheral names

STM32F7 QSPI flash timeouts and 4-byte addressing (#152) ...

* STM32F7: Unconditionally enable QSPI workarounds

On the STM32769NI at least this patch is required for stable QSPI use.
Enable it uncondtionally in case other boards need it too.

Further discussions:

https://github.com/ARMmbed/mbed-os/issues/10049
https://github.com/ARMmbed/mbed-os/issues/15108

https://github.com/STMicroelectronics/STM32CubeF7/issues/52
https://github.com/STMicroelectronics/STM32CubeF7/issues/82

* QSPIF: Attempt 4-byte addressing on Macronix chips

mbed-os PR 11531 introduced 4-byte addressing in the QSPIF block device:

https://github.com/ARMmbed/mbed-os/pull/11531

During testing it was found that this code broke on the NRF52840_DK and
DISCO_F769NI.

The NRF52840_DK controller seems unable to handle 4-byte addressing at
all and has been disabled entirely in another code section.

The DISCO_F769NI breakage was attributed to the flash chip but after more
research I believe this is related to the QSPI controller, not the 4-byte
addressing itself.

Now that the QSPI controller has a workaround, enable 4-byte addressing
again and hope it works fine this time.

Add STM32F103xD, STM32F103xG series and fix STM32F103xE startup file (#151) ...

* Add STM32F103xD, STM32F103xG series and fix STM32F103xE startup file

* Add system_clock.c file for STM32F103xD series

* Add STM32F103xD and STM32F103xG to targets.json

---------

Co-authored-by: Perez <maperez@hp.com>

Teensy 4.1 port with Ethernet support (#144) ...

* Start porting to Teensy 4.1, also fix some compiler warnings in FSL HAL

* Add hardware init for Teensy, refactor phy drivers, rework IMX EMAC autonegotiate code

* Revert some testing changes

* Fix incorrect phy address used outside of low_level_init_successful()

* Ethernet operational!

* Turn off DEBUG_IMX_EMAC

* Style fixes

* Style again

* Bugfix: mbed_lib.json files in project source dir were not getting picked up

* Bugfix: CLion debug configurations not generated properly due to variables going out of scope

* Support Teensy OTP MAC address

Fix TLS example by enabling SHA-1 certificates out of the box (#149)

(profiles): Remove debug symbols from release profile, compress debug sections (#147)

Fix BlueNRG undefined reference to ble_cordio_get_hci_driver() (#145)

(vscode + cmake) Add option MBED_GENERATE_VSCODE_CONFIG (#142)

Fix serial_format() on MIMXRT1170 as well (#141)

Fix debug-less upload methods (#140) ...

* Fix debug-less upload methods

* Oops, fix build outside of Clion

Add Wio-H725AE (#133) ...

* Add clock settings for H725xE

* Correction of memory mapping for H725xE

* Added new target WIO_H725AE

* Added WIO_H725 into targets.json

* Added upload methods file for WIO_H725

* Licence filled from original source file

* Space alignment

* Added macro MBED_SPLIT_HEAP for MCU_STM32H725xE

* Typo correction

* Correction of upload methods for WIO_H725AE

mbed-ce@master + fixes + gcc 11 support (#135) ...

* Fix rtos::Mutex stub, add trylock() method

* LowPowerTicker - Add ::attach(...) method + call callback

* mbed_power_management - rename sleep --> mbed_sleep to avoid conflicts

Fixes conflicts w/ unistd.h and boost::ut

* GCC 11/C++ 20 - Remove deprecated type_traits

* GCC 11/C++ 20 - Remove redundant templating of methods

* Warning - pragma ignore invalid-noreturn for unit tests

* Fix astyle errors

* Fix missing mbed_sleep() calls

Refactor upload methods to streamline the debugging experience (#129) ...

* Change all debug configurations to not reset and exit on error.  Initial tasks.json implementation.

* st-util working on command line and VS Code!

* Convert STM32CUBE, fix spaces in GDB server task command

* pyocd working!

* Convert OpenOCD

* Convert JLINK

* Convert REDLINK upload method

* Fix CMake typo

* Try and fix some variable scope issues

* Initial CLion implementation.  Need to test with hardware.

* Add a separate task that kicks off a build before each debug session

MIMXRT: Make ncache region non-cached again (#132) ...

* MIMXRT: Make ncache region non-cached again

* Oops, remove print

Fix MIMXRT serial_format() not working (#134)

Update MIMXRT clocking to hopefully fix deep sleep, fix boot issues on Teensy4 (#130) ...

* Fix incorrect image length in header preventing boot

* Fix ncache region being located in SEMC even on boards without it

* Don't reserve RAM for ncache anymore

* Fix crash when activating BufferedSerial on Teensy D0 and D1.  Also fix incorrect daisy register mapping.

* Fix missing space in linker script

* Start on fixing incorrect MIMXRT clock frequency

* LPM working!

* Clean up LPM and clocking

* Add teensy model identifier

* Fix license headers

device ram size is 40 kb, not 48 kB (#128) ...

* device ram size is 40 kb, not 48 kB
in total RAM+RAM1 it has 48 kB, but the regions are not continous.
This error is also arm-pack index.json

* add section for CCM

bug fix for Blackpill-F411CE (#127)

Add Blackpill-F411CE (#123) ...

* add target Blackpill-F411CE

* correction of Blackpill-F411CE

* add Blackpill to targets.json

* correction of STM32F411xE system_clock.c

* Update BLACKPILL_F411CE.cmake

Typo

* Update PinNames.h

LED correction

* Update PinNames.h

* Update BLACKPILL_F411CE.cmake

Correcting the wrong name in the Note2 about pyOCD.

* Update BLACKPILL_F411CE.cmake

Updated notes - an external debugger is required

MIMXRT1060_EVK and Teensy 4.0 support (#113) ...

* Initial attempt at Teensy 4.0 support

* Hide internal target

* Fix some targets.json issues, add boot code for the MIMXRT1060_EVK.  It boots but tests aren't able to run properly yet.

* Disable LPTICKER on MIMXRT1060, fix pin names for newer dev kits

* Enable MIMXRT106x ethernet

Update for Doxygen 1.9.5 (#119) ...

* Update for Doxygen 1.9.5

* Also update doxygen version in docs.yaml

* Also fix Doxygen version in basic_checks.yaml