diff --git a/.gitattributes b/.gitattributes
index 05491d6..15a24c1 100644
--- a/.gitattributes
+++ b/.gitattributes
@@ -2,6 +2,7 @@
*.cpp text
*.h text
*.s text
+*.S text
*.sct text
*.ld text
*.txt text
diff --git a/targets/TARGET_STM/TARGET_STM32L1/TARGET_IM880B/device/TOOLCHAIN_ARM_MICRO/startup_stm32l151xba.S b/targets/TARGET_STM/TARGET_STM32L1/TARGET_IM880B/device/TOOLCHAIN_ARM_MICRO/startup_stm32l151xba.S
index f30c8a4..7485692 100644
--- a/targets/TARGET_STM/TARGET_STM32L1/TARGET_IM880B/device/TOOLCHAIN_ARM_MICRO/startup_stm32l151xba.S
+++ b/targets/TARGET_STM/TARGET_STM32L1/TARGET_IM880B/device/TOOLCHAIN_ARM_MICRO/startup_stm32l151xba.S
@@ -1,279 +1,279 @@
-;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
-;* File Name : startup_stm32l151xb.s
-;* Author : MCD Application Team
-;* Version : V2.2.0
-;* Date : 01-July-2016
-;* Description : STM32L151XB Devices vector for MDK-ARM toolchain.
-;* This module performs:
-;* - Set the initial SP
-;* - Set the initial PC == Reset_Handler
-;* - Set the vector table entries with the exceptions ISR
-;* address.
-;* - Configure the system clock
-;* - Branches to __main in the C library (which eventually
-;* calls main()).
-;* After Reset the Cortex-M3 processor is in Thread mode,
-;* priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;*
-;* COPYRIGHT(c) 2016 STMicroelectronics
-;*
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;* 1. Redistributions of source code must retain the above copyright notice,
-;* this list of conditions and the following disclaimer.
-;* 2. Redistributions in binary form must reproduce the above copyright notice,
-;* this list of conditions and the following disclaimer in the documentation
-;* and/or other materials provided with the distribution.
-;* 3. Neither the name of STMicroelectronics nor the names of its contributors
-;* may be used to endorse or promote products derived from this software
-;* without specific prior written permission.
-;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-;
-;*******************************************************************************
-
-__initial_sp EQU 0x20008000 ; Top of RAM (32 KB)
-
- PRESERVE8
- THUMB
-
-
-; Vector Table Mapped to Address 0 at Reset
- AREA RESET, DATA, READONLY
- EXPORT __Vectors
- EXPORT __Vectors_End
- EXPORT __Vectors_Size
-
-__Vectors DCD __initial_sp ; Top of Stack
- DCD Reset_Handler ; Reset Handler
- DCD NMI_Handler ; NMI Handler
- DCD HardFault_Handler ; Hard Fault Handler
- DCD MemManage_Handler ; MPU Fault Handler
- DCD BusFault_Handler ; Bus Fault Handler
- DCD UsageFault_Handler ; Usage Fault Handler
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD SVC_Handler ; SVCall Handler
- DCD DebugMon_Handler ; Debug Monitor Handler
- DCD 0 ; Reserved
- DCD PendSV_Handler ; PendSV Handler
- DCD SysTick_Handler ; SysTick Handler
-
- ; External Interrupts
- DCD WWDG_IRQHandler ; Window Watchdog
- DCD PVD_IRQHandler ; PVD through EXTI Line detect
- DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp
- DCD RTC_WKUP_IRQHandler ; RTC Wakeup
- DCD FLASH_IRQHandler ; FLASH
- DCD RCC_IRQHandler ; RCC
- DCD EXTI0_IRQHandler ; EXTI Line 0
- DCD EXTI1_IRQHandler ; EXTI Line 1
- DCD EXTI2_IRQHandler ; EXTI Line 2
- DCD EXTI3_IRQHandler ; EXTI Line 3
- DCD EXTI4_IRQHandler ; EXTI Line 4
- DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
- DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
- DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
- DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
- DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
- DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
- DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
- DCD ADC1_IRQHandler ; ADC1
- DCD USB_HP_IRQHandler ; USB High Priority
- DCD USB_LP_IRQHandler ; USB Low Priority
- DCD DAC_IRQHandler ; DAC
- DCD COMP_IRQHandler ; COMP through EXTI Line
- DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
- DCD 0 ; Reserved
- DCD TIM9_IRQHandler ; TIM9
- DCD TIM10_IRQHandler ; TIM10
- DCD TIM11_IRQHandler ; TIM11
- DCD TIM2_IRQHandler ; TIM2
- DCD TIM3_IRQHandler ; TIM3
- DCD TIM4_IRQHandler ; TIM4
- DCD I2C1_EV_IRQHandler ; I2C1 Event
- DCD I2C1_ER_IRQHandler ; I2C1 Error
- DCD I2C2_EV_IRQHandler ; I2C2 Event
- DCD I2C2_ER_IRQHandler ; I2C2 Error
- DCD SPI1_IRQHandler ; SPI1
- DCD SPI2_IRQHandler ; SPI2
- DCD USART1_IRQHandler ; USART1
- DCD USART2_IRQHandler ; USART2
- DCD USART3_IRQHandler ; USART3
- DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
- DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
- DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend
- DCD TIM6_IRQHandler ; TIM6
- DCD TIM7_IRQHandler ; TIM7
-
-__Vectors_End
-
-__Vectors_Size EQU __Vectors_End - __Vectors
-
- AREA |.text|, CODE, READONLY
-
-; Reset handler routine
-Reset_Handler PROC
- EXPORT Reset_Handler [WEAK]
- IMPORT __main
- IMPORT SystemInit
- LDR R0, =SystemInit
- BLX R0
- LDR R0, =__main
- BX R0
- ENDP
-
-; Dummy Exception Handlers (infinite loops which can be modified)
-
-NMI_Handler PROC
- EXPORT NMI_Handler [WEAK]
- B .
- ENDP
-HardFault_Handler\
- PROC
- EXPORT HardFault_Handler [WEAK]
- B .
- ENDP
-MemManage_Handler\
- PROC
- EXPORT MemManage_Handler [WEAK]
- B .
- ENDP
-BusFault_Handler\
- PROC
- EXPORT BusFault_Handler [WEAK]
- B .
- ENDP
-UsageFault_Handler\
- PROC
- EXPORT UsageFault_Handler [WEAK]
- B .
- ENDP
-SVC_Handler PROC
- EXPORT SVC_Handler [WEAK]
- B .
- ENDP
-DebugMon_Handler\
- PROC
- EXPORT DebugMon_Handler [WEAK]
- B .
- ENDP
-PendSV_Handler PROC
- EXPORT PendSV_Handler [WEAK]
- B .
- ENDP
-SysTick_Handler PROC
- EXPORT SysTick_Handler [WEAK]
- B .
- ENDP
-
-Default_Handler PROC
-
- EXPORT WWDG_IRQHandler [WEAK]
- EXPORT PVD_IRQHandler [WEAK]
- EXPORT TAMPER_STAMP_IRQHandler [WEAK]
- EXPORT RTC_WKUP_IRQHandler [WEAK]
- EXPORT FLASH_IRQHandler [WEAK]
- EXPORT RCC_IRQHandler [WEAK]
- EXPORT EXTI0_IRQHandler [WEAK]
- EXPORT EXTI1_IRQHandler [WEAK]
- EXPORT EXTI2_IRQHandler [WEAK]
- EXPORT EXTI3_IRQHandler [WEAK]
- EXPORT EXTI4_IRQHandler [WEAK]
- EXPORT DMA1_Channel1_IRQHandler [WEAK]
- EXPORT DMA1_Channel2_IRQHandler [WEAK]
- EXPORT DMA1_Channel3_IRQHandler [WEAK]
- EXPORT DMA1_Channel4_IRQHandler [WEAK]
- EXPORT DMA1_Channel5_IRQHandler [WEAK]
- EXPORT DMA1_Channel6_IRQHandler [WEAK]
- EXPORT DMA1_Channel7_IRQHandler [WEAK]
- EXPORT ADC1_IRQHandler [WEAK]
- EXPORT USB_HP_IRQHandler [WEAK]
- EXPORT USB_LP_IRQHandler [WEAK]
- EXPORT DAC_IRQHandler [WEAK]
- EXPORT COMP_IRQHandler [WEAK]
- EXPORT EXTI9_5_IRQHandler [WEAK]
- EXPORT TIM9_IRQHandler [WEAK]
- EXPORT TIM10_IRQHandler [WEAK]
- EXPORT TIM11_IRQHandler [WEAK]
- EXPORT TIM2_IRQHandler [WEAK]
- EXPORT TIM3_IRQHandler [WEAK]
- EXPORT TIM4_IRQHandler [WEAK]
- EXPORT I2C1_EV_IRQHandler [WEAK]
- EXPORT I2C1_ER_IRQHandler [WEAK]
- EXPORT I2C2_EV_IRQHandler [WEAK]
- EXPORT I2C2_ER_IRQHandler [WEAK]
- EXPORT SPI1_IRQHandler [WEAK]
- EXPORT SPI2_IRQHandler [WEAK]
- EXPORT USART1_IRQHandler [WEAK]
- EXPORT USART2_IRQHandler [WEAK]
- EXPORT USART3_IRQHandler [WEAK]
- EXPORT EXTI15_10_IRQHandler [WEAK]
- EXPORT RTC_Alarm_IRQHandler [WEAK]
- EXPORT USB_FS_WKUP_IRQHandler [WEAK]
- EXPORT TIM6_IRQHandler [WEAK]
- EXPORT TIM7_IRQHandler [WEAK]
-
-WWDG_IRQHandler
-PVD_IRQHandler
-TAMPER_STAMP_IRQHandler
-RTC_WKUP_IRQHandler
-FLASH_IRQHandler
-RCC_IRQHandler
-EXTI0_IRQHandler
-EXTI1_IRQHandler
-EXTI2_IRQHandler
-EXTI3_IRQHandler
-EXTI4_IRQHandler
-DMA1_Channel1_IRQHandler
-DMA1_Channel2_IRQHandler
-DMA1_Channel3_IRQHandler
-DMA1_Channel4_IRQHandler
-DMA1_Channel5_IRQHandler
-DMA1_Channel6_IRQHandler
-DMA1_Channel7_IRQHandler
-ADC1_IRQHandler
-USB_HP_IRQHandler
-USB_LP_IRQHandler
-DAC_IRQHandler
-COMP_IRQHandler
-EXTI9_5_IRQHandler
-TIM9_IRQHandler
-TIM10_IRQHandler
-TIM11_IRQHandler
-TIM2_IRQHandler
-TIM3_IRQHandler
-TIM4_IRQHandler
-I2C1_EV_IRQHandler
-I2C1_ER_IRQHandler
-I2C2_EV_IRQHandler
-I2C2_ER_IRQHandler
-SPI1_IRQHandler
-SPI2_IRQHandler
-USART1_IRQHandler
-USART2_IRQHandler
-USART3_IRQHandler
-EXTI15_10_IRQHandler
-RTC_Alarm_IRQHandler
-USB_FS_WKUP_IRQHandler
-TIM6_IRQHandler
-TIM7_IRQHandler
-
- B .
-
- ENDP
-
- ALIGN
- END
+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name : startup_stm32l151xb.s
+;* Author : MCD Application Team
+;* Version : V2.2.0
+;* Date : 01-July-2016
+;* Description : STM32L151XB Devices vector for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR
+;* address.
+;* - Configure the system clock
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M3 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* COPYRIGHT(c) 2016 STMicroelectronics
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;* 1. Redistributions of source code must retain the above copyright notice,
+;* this list of conditions and the following disclaimer.
+;* 2. Redistributions in binary form must reproduce the above copyright notice,
+;* this list of conditions and the following disclaimer in the documentation
+;* and/or other materials provided with the distribution.
+;* 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* may be used to endorse or promote products derived from this software
+;* without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*******************************************************************************
+
+__initial_sp EQU 0x20008000 ; Top of RAM (32 KB)
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp
+ DCD RTC_WKUP_IRQHandler ; RTC Wakeup
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line 0
+ DCD EXTI1_IRQHandler ; EXTI Line 1
+ DCD EXTI2_IRQHandler ; EXTI Line 2
+ DCD EXTI3_IRQHandler ; EXTI Line 3
+ DCD EXTI4_IRQHandler ; EXTI Line 4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_IRQHandler ; ADC1
+ DCD USB_HP_IRQHandler ; USB High Priority
+ DCD USB_LP_IRQHandler ; USB Low Priority
+ DCD DAC_IRQHandler ; DAC
+ DCD COMP_IRQHandler ; COMP through EXTI Line
+ DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
+ DCD 0 ; Reserved
+ DCD TIM9_IRQHandler ; TIM9
+ DCD TIM10_IRQHandler ; TIM10
+ DCD TIM11_IRQHandler ; TIM11
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
+ DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
+ DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend
+ DCD TIM6_IRQHandler ; TIM6
+ DCD TIM7_IRQHandler ; TIM7
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMPER_STAMP_IRQHandler [WEAK]
+ EXPORT RTC_WKUP_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_IRQHandler [WEAK]
+ EXPORT DMA1_Channel3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel5_IRQHandler [WEAK]
+ EXPORT DMA1_Channel6_IRQHandler [WEAK]
+ EXPORT DMA1_Channel7_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT USB_HP_IRQHandler [WEAK]
+ EXPORT USB_LP_IRQHandler [WEAK]
+ EXPORT DAC_IRQHandler [WEAK]
+ EXPORT COMP_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM9_IRQHandler [WEAK]
+ EXPORT TIM10_IRQHandler [WEAK]
+ EXPORT TIM11_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM4_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT I2C2_EV_IRQHandler [WEAK]
+ EXPORT I2C2_ER_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTC_Alarm_IRQHandler [WEAK]
+ EXPORT USB_FS_WKUP_IRQHandler [WEAK]
+ EXPORT TIM6_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_STAMP_IRQHandler
+RTC_WKUP_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_IRQHandler
+USB_HP_IRQHandler
+USB_LP_IRQHandler
+DAC_IRQHandler
+COMP_IRQHandler
+EXTI9_5_IRQHandler
+TIM9_IRQHandler
+TIM10_IRQHandler
+TIM11_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+USB_FS_WKUP_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+ END
diff --git a/targets/TARGET_STM/TARGET_STM32L1/TARGET_IM880B/device/TOOLCHAIN_ARM_STD/startup_stm32l151xba.S b/targets/TARGET_STM/TARGET_STM32L1/TARGET_IM880B/device/TOOLCHAIN_ARM_STD/startup_stm32l151xba.S
index ed5f583..1fc1de5 100644
--- a/targets/TARGET_STM/TARGET_STM32L1/TARGET_IM880B/device/TOOLCHAIN_ARM_STD/startup_stm32l151xba.S
+++ b/targets/TARGET_STM/TARGET_STM32L1/TARGET_IM880B/device/TOOLCHAIN_ARM_STD/startup_stm32l151xba.S
@@ -1,285 +1,285 @@
-;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
-;* File Name : startup_stm32l151xb.s
-;* Author : MCD Application Team
-;* Version : V2.2.0
-;* Date : 01-July-2016
-;* Description : STM32L151XB Devices vector for MDK-ARM toolchain.
-;* This module performs:
-;* - Set the initial SP
-;* - Set the initial PC == Reset_Handler
-;* - Set the vector table entries with the exceptions ISR
-;* address.
-;* - Configure the system clock
-;* - Branches to __main in the C library (which eventually
-;* calls main()).
-;* After Reset the Cortex-M3 processor is in Thread mode,
-;* priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;*
-;* COPYRIGHT(c) 2016 STMicroelectronics
-;*
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;* 1. Redistributions of source code must retain the above copyright notice,
-;* this list of conditions and the following disclaimer.
-;* 2. Redistributions in binary form must reproduce the above copyright notice,
-;* this list of conditions and the following disclaimer in the documentation
-;* and/or other materials provided with the distribution.
-;* 3. Neither the name of STMicroelectronics nor the names of its contributors
-;* may be used to endorse or promote products derived from this software
-;* without specific prior written permission.
-;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-;
-;*******************************************************************************
-;
-; Amount of memory (in bytes) allocated for Stack
-; Tailor this value to your application needs
-; Stack Configuration
-; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
-;
-
-__initial_sp EQU 0x20008000 ; Top of RAM (32 KB)
-
- PRESERVE8
- THUMB
-
-
-; Vector Table Mapped to Address 0 at Reset
- AREA RESET, DATA, READONLY
- EXPORT __Vectors
- EXPORT __Vectors_End
- EXPORT __Vectors_Size
-
-__Vectors DCD __initial_sp ; Top of Stack
- DCD Reset_Handler ; Reset Handler
- DCD NMI_Handler ; NMI Handler
- DCD HardFault_Handler ; Hard Fault Handler
- DCD MemManage_Handler ; MPU Fault Handler
- DCD BusFault_Handler ; Bus Fault Handler
- DCD UsageFault_Handler ; Usage Fault Handler
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD SVC_Handler ; SVCall Handler
- DCD DebugMon_Handler ; Debug Monitor Handler
- DCD 0 ; Reserved
- DCD PendSV_Handler ; PendSV Handler
- DCD SysTick_Handler ; SysTick Handler
-
- ; External Interrupts
- DCD WWDG_IRQHandler ; Window Watchdog
- DCD PVD_IRQHandler ; PVD through EXTI Line detect
- DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp
- DCD RTC_WKUP_IRQHandler ; RTC Wakeup
- DCD FLASH_IRQHandler ; FLASH
- DCD RCC_IRQHandler ; RCC
- DCD EXTI0_IRQHandler ; EXTI Line 0
- DCD EXTI1_IRQHandler ; EXTI Line 1
- DCD EXTI2_IRQHandler ; EXTI Line 2
- DCD EXTI3_IRQHandler ; EXTI Line 3
- DCD EXTI4_IRQHandler ; EXTI Line 4
- DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
- DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
- DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
- DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
- DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
- DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
- DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
- DCD ADC1_IRQHandler ; ADC1
- DCD USB_HP_IRQHandler ; USB High Priority
- DCD USB_LP_IRQHandler ; USB Low Priority
- DCD DAC_IRQHandler ; DAC
- DCD COMP_IRQHandler ; COMP through EXTI Line
- DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
- DCD 0 ; Reserved
- DCD TIM9_IRQHandler ; TIM9
- DCD TIM10_IRQHandler ; TIM10
- DCD TIM11_IRQHandler ; TIM11
- DCD TIM2_IRQHandler ; TIM2
- DCD TIM3_IRQHandler ; TIM3
- DCD TIM4_IRQHandler ; TIM4
- DCD I2C1_EV_IRQHandler ; I2C1 Event
- DCD I2C1_ER_IRQHandler ; I2C1 Error
- DCD I2C2_EV_IRQHandler ; I2C2 Event
- DCD I2C2_ER_IRQHandler ; I2C2 Error
- DCD SPI1_IRQHandler ; SPI1
- DCD SPI2_IRQHandler ; SPI2
- DCD USART1_IRQHandler ; USART1
- DCD USART2_IRQHandler ; USART2
- DCD USART3_IRQHandler ; USART3
- DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
- DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
- DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend
- DCD TIM6_IRQHandler ; TIM6
- DCD TIM7_IRQHandler ; TIM7
-
-__Vectors_End
-
-__Vectors_Size EQU __Vectors_End - __Vectors
-
- AREA |.text|, CODE, READONLY
-
-; Reset handler routine
-Reset_Handler PROC
- EXPORT Reset_Handler [WEAK]
- IMPORT __main
- IMPORT SystemInit
- LDR R0, =SystemInit
- BLX R0
- LDR R0, =__main
- BX R0
- ENDP
-
-; Dummy Exception Handlers (infinite loops which can be modified)
-
-NMI_Handler PROC
- EXPORT NMI_Handler [WEAK]
- B .
- ENDP
-HardFault_Handler\
- PROC
- EXPORT HardFault_Handler [WEAK]
- B .
- ENDP
-MemManage_Handler\
- PROC
- EXPORT MemManage_Handler [WEAK]
- B .
- ENDP
-BusFault_Handler\
- PROC
- EXPORT BusFault_Handler [WEAK]
- B .
- ENDP
-UsageFault_Handler\
- PROC
- EXPORT UsageFault_Handler [WEAK]
- B .
- ENDP
-SVC_Handler PROC
- EXPORT SVC_Handler [WEAK]
- B .
- ENDP
-DebugMon_Handler\
- PROC
- EXPORT DebugMon_Handler [WEAK]
- B .
- ENDP
-PendSV_Handler PROC
- EXPORT PendSV_Handler [WEAK]
- B .
- ENDP
-SysTick_Handler PROC
- EXPORT SysTick_Handler [WEAK]
- B .
- ENDP
-
-Default_Handler PROC
-
- EXPORT WWDG_IRQHandler [WEAK]
- EXPORT PVD_IRQHandler [WEAK]
- EXPORT TAMPER_STAMP_IRQHandler [WEAK]
- EXPORT RTC_WKUP_IRQHandler [WEAK]
- EXPORT FLASH_IRQHandler [WEAK]
- EXPORT RCC_IRQHandler [WEAK]
- EXPORT EXTI0_IRQHandler [WEAK]
- EXPORT EXTI1_IRQHandler [WEAK]
- EXPORT EXTI2_IRQHandler [WEAK]
- EXPORT EXTI3_IRQHandler [WEAK]
- EXPORT EXTI4_IRQHandler [WEAK]
- EXPORT DMA1_Channel1_IRQHandler [WEAK]
- EXPORT DMA1_Channel2_IRQHandler [WEAK]
- EXPORT DMA1_Channel3_IRQHandler [WEAK]
- EXPORT DMA1_Channel4_IRQHandler [WEAK]
- EXPORT DMA1_Channel5_IRQHandler [WEAK]
- EXPORT DMA1_Channel6_IRQHandler [WEAK]
- EXPORT DMA1_Channel7_IRQHandler [WEAK]
- EXPORT ADC1_IRQHandler [WEAK]
- EXPORT USB_HP_IRQHandler [WEAK]
- EXPORT USB_LP_IRQHandler [WEAK]
- EXPORT DAC_IRQHandler [WEAK]
- EXPORT COMP_IRQHandler [WEAK]
- EXPORT EXTI9_5_IRQHandler [WEAK]
- EXPORT TIM9_IRQHandler [WEAK]
- EXPORT TIM10_IRQHandler [WEAK]
- EXPORT TIM11_IRQHandler [WEAK]
- EXPORT TIM2_IRQHandler [WEAK]
- EXPORT TIM3_IRQHandler [WEAK]
- EXPORT TIM4_IRQHandler [WEAK]
- EXPORT I2C1_EV_IRQHandler [WEAK]
- EXPORT I2C1_ER_IRQHandler [WEAK]
- EXPORT I2C2_EV_IRQHandler [WEAK]
- EXPORT I2C2_ER_IRQHandler [WEAK]
- EXPORT SPI1_IRQHandler [WEAK]
- EXPORT SPI2_IRQHandler [WEAK]
- EXPORT USART1_IRQHandler [WEAK]
- EXPORT USART2_IRQHandler [WEAK]
- EXPORT USART3_IRQHandler [WEAK]
- EXPORT EXTI15_10_IRQHandler [WEAK]
- EXPORT RTC_Alarm_IRQHandler [WEAK]
- EXPORT USB_FS_WKUP_IRQHandler [WEAK]
- EXPORT TIM6_IRQHandler [WEAK]
- EXPORT TIM7_IRQHandler [WEAK]
-
-WWDG_IRQHandler
-PVD_IRQHandler
-TAMPER_STAMP_IRQHandler
-RTC_WKUP_IRQHandler
-FLASH_IRQHandler
-RCC_IRQHandler
-EXTI0_IRQHandler
-EXTI1_IRQHandler
-EXTI2_IRQHandler
-EXTI3_IRQHandler
-EXTI4_IRQHandler
-DMA1_Channel1_IRQHandler
-DMA1_Channel2_IRQHandler
-DMA1_Channel3_IRQHandler
-DMA1_Channel4_IRQHandler
-DMA1_Channel5_IRQHandler
-DMA1_Channel6_IRQHandler
-DMA1_Channel7_IRQHandler
-ADC1_IRQHandler
-USB_HP_IRQHandler
-USB_LP_IRQHandler
-DAC_IRQHandler
-COMP_IRQHandler
-EXTI9_5_IRQHandler
-TIM9_IRQHandler
-TIM10_IRQHandler
-TIM11_IRQHandler
-TIM2_IRQHandler
-TIM3_IRQHandler
-TIM4_IRQHandler
-I2C1_EV_IRQHandler
-I2C1_ER_IRQHandler
-I2C2_EV_IRQHandler
-I2C2_ER_IRQHandler
-SPI1_IRQHandler
-SPI2_IRQHandler
-USART1_IRQHandler
-USART2_IRQHandler
-USART3_IRQHandler
-EXTI15_10_IRQHandler
-RTC_Alarm_IRQHandler
-USB_FS_WKUP_IRQHandler
-TIM6_IRQHandler
-TIM7_IRQHandler
-
- B .
-
- ENDP
-
- ALIGN
- END
+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name : startup_stm32l151xb.s
+;* Author : MCD Application Team
+;* Version : V2.2.0
+;* Date : 01-July-2016
+;* Description : STM32L151XB Devices vector for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR
+;* address.
+;* - Configure the system clock
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M3 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* COPYRIGHT(c) 2016 STMicroelectronics
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;* 1. Redistributions of source code must retain the above copyright notice,
+;* this list of conditions and the following disclaimer.
+;* 2. Redistributions in binary form must reproduce the above copyright notice,
+;* this list of conditions and the following disclaimer in the documentation
+;* and/or other materials provided with the distribution.
+;* 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* may be used to endorse or promote products derived from this software
+;* without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; Stack Configuration
+; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;
+
+__initial_sp EQU 0x20008000 ; Top of RAM (32 KB)
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp
+ DCD RTC_WKUP_IRQHandler ; RTC Wakeup
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line 0
+ DCD EXTI1_IRQHandler ; EXTI Line 1
+ DCD EXTI2_IRQHandler ; EXTI Line 2
+ DCD EXTI3_IRQHandler ; EXTI Line 3
+ DCD EXTI4_IRQHandler ; EXTI Line 4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_IRQHandler ; ADC1
+ DCD USB_HP_IRQHandler ; USB High Priority
+ DCD USB_LP_IRQHandler ; USB Low Priority
+ DCD DAC_IRQHandler ; DAC
+ DCD COMP_IRQHandler ; COMP through EXTI Line
+ DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
+ DCD 0 ; Reserved
+ DCD TIM9_IRQHandler ; TIM9
+ DCD TIM10_IRQHandler ; TIM10
+ DCD TIM11_IRQHandler ; TIM11
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
+ DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
+ DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend
+ DCD TIM6_IRQHandler ; TIM6
+ DCD TIM7_IRQHandler ; TIM7
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMPER_STAMP_IRQHandler [WEAK]
+ EXPORT RTC_WKUP_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_IRQHandler [WEAK]
+ EXPORT DMA1_Channel3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel5_IRQHandler [WEAK]
+ EXPORT DMA1_Channel6_IRQHandler [WEAK]
+ EXPORT DMA1_Channel7_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT USB_HP_IRQHandler [WEAK]
+ EXPORT USB_LP_IRQHandler [WEAK]
+ EXPORT DAC_IRQHandler [WEAK]
+ EXPORT COMP_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM9_IRQHandler [WEAK]
+ EXPORT TIM10_IRQHandler [WEAK]
+ EXPORT TIM11_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM4_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT I2C2_EV_IRQHandler [WEAK]
+ EXPORT I2C2_ER_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTC_Alarm_IRQHandler [WEAK]
+ EXPORT USB_FS_WKUP_IRQHandler [WEAK]
+ EXPORT TIM6_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_STAMP_IRQHandler
+RTC_WKUP_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_IRQHandler
+USB_HP_IRQHandler
+USB_LP_IRQHandler
+DAC_IRQHandler
+COMP_IRQHandler
+EXTI9_5_IRQHandler
+TIM9_IRQHandler
+TIM10_IRQHandler
+TIM11_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTC_Alarm_IRQHandler
+USB_FS_WKUP_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+ END
diff --git a/targets/TARGET_STM/TARGET_STM32L1/TARGET_IM880B/device/TOOLCHAIN_GCC_ARM/startup_stm32l151xba.S b/targets/TARGET_STM/TARGET_STM32L1/TARGET_IM880B/device/TOOLCHAIN_GCC_ARM/startup_stm32l151xba.S
index f61ee5e..4eb489b 100644
--- a/targets/TARGET_STM/TARGET_STM32L1/TARGET_IM880B/device/TOOLCHAIN_GCC_ARM/startup_stm32l151xba.S
+++ b/targets/TARGET_STM/TARGET_STM32L1/TARGET_IM880B/device/TOOLCHAIN_GCC_ARM/startup_stm32l151xba.S
@@ -1,363 +1,363 @@
-/**
- ******************************************************************************
- * @file startup_stm32l151xb.s
- * @author MCD Application Team
- * @version V2.2.0
- * @date 01-July-2016
- * @brief STM32L151XB Devices vector table for
- * Atollic toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Configure the clock system
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M3 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- *
- * © COPYRIGHT(c) 2016 STMicroelectronics
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m3
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-
-/**
- * @brief This is the code that gets called when the processor first
- * starts execution following a reset event. Only the absolutely
- * necessary set is performed, after which the application
- * supplied main() routine is called.
- * @param None
- * @retval : None
-*/
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
-
-/* Copy the data segment initializers from flash to SRAM */
- movs r1, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r3, =_sidata
- ldr r3, [r3, r1]
- str r3, [r0, r1]
- adds r1, r1, #4
-
-LoopCopyDataInit:
- ldr r0, =_sdata
- ldr r3, =_edata
- adds r2, r0, r1
- cmp r2, r3
- bcc CopyDataInit
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-
-/**
- * Calling the crt0 'cold-start' entry point. There __libc_init_array is called
- * and when existing hardware_init_hook() and software_init_hook() before
- * starting main(). software_init_hook() is available and has to be called due
- * to initializsation when using rtos.
-*/
- bl _start
- bx lr
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M3. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word MemManage_Handler
- .word BusFault_Handler
- .word UsageFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word DebugMon_Handler
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler
- .word PVD_IRQHandler
- .word TAMPER_STAMP_IRQHandler
- .word RTC_WKUP_IRQHandler
- .word FLASH_IRQHandler
- .word RCC_IRQHandler
- .word EXTI0_IRQHandler
- .word EXTI1_IRQHandler
- .word EXTI2_IRQHandler
- .word EXTI3_IRQHandler
- .word EXTI4_IRQHandler
- .word DMA1_Channel1_IRQHandler
- .word DMA1_Channel2_IRQHandler
- .word DMA1_Channel3_IRQHandler
- .word DMA1_Channel4_IRQHandler
- .word DMA1_Channel5_IRQHandler
- .word DMA1_Channel6_IRQHandler
- .word DMA1_Channel7_IRQHandler
- .word ADC1_IRQHandler
- .word USB_HP_IRQHandler
- .word USB_LP_IRQHandler
- .word DAC_IRQHandler
- .word COMP_IRQHandler
- .word EXTI9_5_IRQHandler
- .word 0
- .word TIM9_IRQHandler
- .word TIM10_IRQHandler
- .word TIM11_IRQHandler
- .word TIM2_IRQHandler
- .word TIM3_IRQHandler
- .word TIM4_IRQHandler
- .word I2C1_EV_IRQHandler
- .word I2C1_ER_IRQHandler
- .word I2C2_EV_IRQHandler
- .word I2C2_ER_IRQHandler
- .word SPI1_IRQHandler
- .word SPI2_IRQHandler
- .word USART1_IRQHandler
- .word USART2_IRQHandler
- .word USART3_IRQHandler
- .word EXTI15_10_IRQHandler
- .word RTC_Alarm_IRQHandler
- .word USB_FS_WKUP_IRQHandler
- .word TIM6_IRQHandler
- .word TIM7_IRQHandler
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak MemManage_Handler
- .thumb_set MemManage_Handler,Default_Handler
-
- .weak BusFault_Handler
- .thumb_set BusFault_Handler,Default_Handler
-
- .weak UsageFault_Handler
- .thumb_set UsageFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak DebugMon_Handler
- .thumb_set DebugMon_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_IRQHandler
- .thumb_set PVD_IRQHandler,Default_Handler
-
- .weak TAMPER_STAMP_IRQHandler
- .thumb_set TAMPER_STAMP_IRQHandler,Default_Handler
-
- .weak RTC_WKUP_IRQHandler
- .thumb_set RTC_WKUP_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_IRQHandler
- .thumb_set EXTI0_IRQHandler,Default_Handler
-
- .weak EXTI1_IRQHandler
- .thumb_set EXTI1_IRQHandler,Default_Handler
-
- .weak EXTI2_IRQHandler
- .thumb_set EXTI2_IRQHandler,Default_Handler
-
- .weak EXTI3_IRQHandler
- .thumb_set EXTI3_IRQHandler,Default_Handler
-
- .weak EXTI4_IRQHandler
- .thumb_set EXTI4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_IRQHandler
- .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
- .weak DMA1_Channel3_IRQHandler
- .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_IRQHandler
- .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
- .weak DMA1_Channel5_IRQHandler
- .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
- .weak DMA1_Channel6_IRQHandler
- .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
- .weak DMA1_Channel7_IRQHandler
- .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
- .weak ADC1_IRQHandler
- .thumb_set ADC1_IRQHandler,Default_Handler
-
- .weak USB_HP_IRQHandler
- .thumb_set USB_HP_IRQHandler,Default_Handler
-
- .weak USB_LP_IRQHandler
- .thumb_set USB_LP_IRQHandler,Default_Handler
-
- .weak DAC_IRQHandler
- .thumb_set DAC_IRQHandler,Default_Handler
-
- .weak COMP_IRQHandler
- .thumb_set COMP_IRQHandler,Default_Handler
-
- .weak EXTI9_5_IRQHandler
- .thumb_set EXTI9_5_IRQHandler,Default_Handler
-
- .weak TIM9_IRQHandler
- .thumb_set TIM9_IRQHandler,Default_Handler
-
- .weak TIM10_IRQHandler
- .thumb_set TIM10_IRQHandler,Default_Handler
-
- .weak TIM11_IRQHandler
- .thumb_set TIM11_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM4_IRQHandler
- .thumb_set TIM4_IRQHandler,Default_Handler
-
- .weak I2C1_EV_IRQHandler
- .thumb_set I2C1_EV_IRQHandler,Default_Handler
-
- .weak I2C1_ER_IRQHandler
- .thumb_set I2C1_ER_IRQHandler,Default_Handler
-
- .weak I2C2_EV_IRQHandler
- .thumb_set I2C2_EV_IRQHandler,Default_Handler
-
- .weak I2C2_ER_IRQHandler
- .thumb_set I2C2_ER_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_IRQHandler
- .thumb_set USART3_IRQHandler,Default_Handler
-
- .weak EXTI15_10_IRQHandler
- .thumb_set EXTI15_10_IRQHandler,Default_Handler
-
- .weak RTC_Alarm_IRQHandler
- .thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
- .weak USB_FS_WKUP_IRQHandler
- .thumb_set USB_FS_WKUP_IRQHandler,Default_Handler
-
- .weak TIM6_IRQHandler
- .thumb_set TIM6_IRQHandler,Default_Handler
-
- .weak TIM7_IRQHandler
- .thumb_set TIM7_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
+/**
+ ******************************************************************************
+ * @file startup_stm32l151xb.s
+ * @author MCD Application Team
+ * @version V2.2.0
+ * @date 01-July-2016
+ * @brief STM32L151XB Devices vector table for
+ * Atollic toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Configure the clock system
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M3 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+
+/**
+ * Calling the crt0 'cold-start' entry point. There __libc_init_array is called
+ * and when existing hardware_init_hook() and software_init_hook() before
+ * starting main(). software_init_hook() is available and has to be called due
+ * to initializsation when using rtos.
+*/
+ bl _start
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMPER_STAMP_IRQHandler
+ .word RTC_WKUP_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_IRQHandler
+ .word USB_HP_IRQHandler
+ .word USB_LP_IRQHandler
+ .word DAC_IRQHandler
+ .word COMP_IRQHandler
+ .word EXTI9_5_IRQHandler
+ .word 0
+ .word TIM9_IRQHandler
+ .word TIM10_IRQHandler
+ .word TIM11_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word TIM4_IRQHandler
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word I2C2_EV_IRQHandler
+ .word I2C2_ER_IRQHandler
+ .word SPI1_IRQHandler
+ .word SPI2_IRQHandler
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word USART3_IRQHandler
+ .word EXTI15_10_IRQHandler
+ .word RTC_Alarm_IRQHandler
+ .word USB_FS_WKUP_IRQHandler
+ .word TIM6_IRQHandler
+ .word TIM7_IRQHandler
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMPER_STAMP_IRQHandler
+ .thumb_set TAMPER_STAMP_IRQHandler,Default_Handler
+
+ .weak RTC_WKUP_IRQHandler
+ .thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak USB_HP_IRQHandler
+ .thumb_set USB_HP_IRQHandler,Default_Handler
+
+ .weak USB_LP_IRQHandler
+ .thumb_set USB_LP_IRQHandler,Default_Handler
+
+ .weak DAC_IRQHandler
+ .thumb_set DAC_IRQHandler,Default_Handler
+
+ .weak COMP_IRQHandler
+ .thumb_set COMP_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM9_IRQHandler
+ .thumb_set TIM9_IRQHandler,Default_Handler
+
+ .weak TIM10_IRQHandler
+ .thumb_set TIM10_IRQHandler,Default_Handler
+
+ .weak TIM11_IRQHandler
+ .thumb_set TIM11_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTC_Alarm_IRQHandler
+ .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+ .weak USB_FS_WKUP_IRQHandler
+ .thumb_set USB_FS_WKUP_IRQHandler,Default_Handler
+
+ .weak TIM6_IRQHandler
+ .thumb_set TIM6_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/targets/TARGET_STM/TARGET_STM32L1/TARGET_IM880B/device/TOOLCHAIN_IAR/startup_stm32l151xba.S b/targets/TARGET_STM/TARGET_STM32L1/TARGET_IM880B/device/TOOLCHAIN_IAR/startup_stm32l151xba.S
index 10d4968..7f9d93b 100644
--- a/targets/TARGET_STM/TARGET_STM32L1/TARGET_IM880B/device/TOOLCHAIN_IAR/startup_stm32l151xba.S
+++ b/targets/TARGET_STM/TARGET_STM32L1/TARGET_IM880B/device/TOOLCHAIN_IAR/startup_stm32l151xba.S
@@ -1,471 +1,471 @@
-;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
-;* File Name : startup_stm32l152xc.s
-;* Author : MCD Application Team
-;* Version : V2.2.0
-;* Date : 01-July-2016
-;* Description : STM32L152XC Devices vector for EWARM toolchain.
-;* This module performs:
-;* - Set the initial SP
-;* - Set the initial PC == __iar_program_start,
-;* - Set the vector table entries with the exceptions ISR
-;* address.
-;* - Configure the system clock
-;* - Branches to main in the C library (which eventually
-;* calls main()).
-;* After Reset the Cortex-M3 processor is in Thread mode,
-;* priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
-;*
-;* © COPYRIGHT(c) 2016 STMicroelectronics
-;*
-;* Redistribution and use in source and binary forms, with or without modification,
-;* are permitted provided that the following conditions are met:
-;* 1. Redistributions of source code must retain the above copyright notice,
-;* this list of conditions and the following disclaimer.
-;* 2. Redistributions in binary form must reproduce the above copyright notice,
-;* this list of conditions and the following disclaimer in the documentation
-;* and/or other materials provided with the distribution.
-;* 3. Neither the name of STMicroelectronics nor the names of its contributors
-;* may be used to endorse or promote products derived from this software
-;* without specific prior written permission.
-;*
-;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-;*
-;*******************************************************************************
-;
-;
-; The modules in this file are included in the libraries, and may be replaced
-; by any user-defined modules that define the PUBLIC symbol _program_start or
-; a user defined start symbol.
-; To override the cstartup defined in the library, simply add your modified
-; version to the workbench project.
-;
-; The vector table is normally located at address 0.
-; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
-; The name "__vector_table" has special meaning for C-SPY:
-; it is where the SP start value is found, and the NVIC vector
-; table register (VTOR) is initialized to this address if != 0.
-;
-; Cortex-M version
-;
-
- MODULE ?cstartup
-
- ;; Forward declaration of sections.
- SECTION CSTACK:DATA:NOROOT(3)
-
- SECTION .intvec:CODE:NOROOT(2)
-
- EXTERN __iar_program_start
- EXTERN SystemInit
- PUBLIC __vector_table
-
- DATA
-__vector_table
- DCD sfe(CSTACK)
- DCD Reset_Handler ; Reset Handler
-
- DCD NMI_Handler ; NMI Handler
- DCD HardFault_Handler ; Hard Fault Handler
- DCD MemManage_Handler ; MPU Fault Handler
- DCD BusFault_Handler ; Bus Fault Handler
- DCD UsageFault_Handler ; Usage Fault Handler
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD SVC_Handler ; SVCall Handler
- DCD DebugMon_Handler ; Debug Monitor Handler
- DCD 0 ; Reserved
- DCD PendSV_Handler ; PendSV Handler
- DCD SysTick_Handler ; SysTick Handler
-
- ; External Interrupts
- DCD WWDG_IRQHandler ; Window Watchdog
- DCD PVD_IRQHandler ; PVD through EXTI Line detect
- DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp
- DCD RTC_WKUP_IRQHandler ; RTC Wakeup
- DCD FLASH_IRQHandler ; FLASH
- DCD RCC_IRQHandler ; RCC
- DCD EXTI0_IRQHandler ; EXTI Line 0
- DCD EXTI1_IRQHandler ; EXTI Line 1
- DCD EXTI2_IRQHandler ; EXTI Line 2
- DCD EXTI3_IRQHandler ; EXTI Line 3
- DCD EXTI4_IRQHandler ; EXTI Line 4
- DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
- DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
- DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
- DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
- DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
- DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
- DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
- DCD ADC1_IRQHandler ; ADC1
- DCD USB_HP_IRQHandler ; USB High Priority
- DCD USB_LP_IRQHandler ; USB Low Priority
- DCD DAC_IRQHandler ; DAC
- DCD COMP_IRQHandler ; COMP through EXTI Line
- DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
- DCD 0 ; Reserved
- DCD TIM9_IRQHandler ; TIM9
- DCD TIM10_IRQHandler ; TIM10
- DCD TIM11_IRQHandler ; TIM11
- DCD TIM2_IRQHandler ; TIM2
- DCD TIM3_IRQHandler ; TIM3
- DCD TIM4_IRQHandler ; TIM4
- DCD I2C1_EV_IRQHandler ; I2C1 Event
- DCD I2C1_ER_IRQHandler ; I2C1 Error
- DCD I2C2_EV_IRQHandler ; I2C2 Event
- DCD I2C2_ER_IRQHandler ; I2C2 Error
- DCD SPI1_IRQHandler ; SPI1
- DCD SPI2_IRQHandler ; SPI2
- DCD USART1_IRQHandler ; USART1
- DCD USART2_IRQHandler ; USART2
- DCD USART3_IRQHandler ; USART3
- DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
- DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
- DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend
- DCD TIM6_IRQHandler ; TIM6
- DCD TIM7_IRQHandler ; TIM7
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;;
-;; Default interrupt handlers.
-;;
- THUMB
-
- PUBWEAK Reset_Handler
- SECTION .text:CODE:REORDER:NOROOT(2)
-Reset_Handler
- LDR R0, =SystemInit
- BLX R0
- LDR R0, =__iar_program_start
- BX R0
-
- PUBWEAK NMI_Handler
- SECTION .text:CODE:REORDER:NOROOT(1)
-NMI_Handler
- B NMI_Handler
-
-
- PUBWEAK HardFault_Handler
- SECTION .text:CODE:REORDER:NOROOT(1)
-HardFault_Handler
- B HardFault_Handler
-
-
- PUBWEAK MemManage_Handler
- SECTION .text:CODE:REORDER:NOROOT(1)
-MemManage_Handler
- B MemManage_Handler
-
-
- PUBWEAK BusFault_Handler
- SECTION .text:CODE:REORDER:NOROOT(1)
-BusFault_Handler
- B BusFault_Handler
-
-
- PUBWEAK UsageFault_Handler
- SECTION .text:CODE:REORDER:NOROOT(1)
-UsageFault_Handler
- B UsageFault_Handler
-
-
- PUBWEAK SVC_Handler
- SECTION .text:CODE:REORDER:NOROOT(1)
-SVC_Handler
- B SVC_Handler
-
-
- PUBWEAK DebugMon_Handler
- SECTION .text:CODE:REORDER:NOROOT(1)
-DebugMon_Handler
- B DebugMon_Handler
-
-
- PUBWEAK PendSV_Handler
- SECTION .text:CODE:REORDER:NOROOT(1)
-PendSV_Handler
- B PendSV_Handler
-
-
- PUBWEAK SysTick_Handler
- SECTION .text:CODE:REORDER:NOROOT(1)
-SysTick_Handler
- B SysTick_Handler
-
-
- PUBWEAK WWDG_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-WWDG_IRQHandler
- B WWDG_IRQHandler
-
-
- PUBWEAK PVD_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-PVD_IRQHandler
- B PVD_IRQHandler
-
-
- PUBWEAK TAMPER_STAMP_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-TAMPER_STAMP_IRQHandler
- B TAMPER_STAMP_IRQHandler
-
-
- PUBWEAK RTC_WKUP_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-RTC_WKUP_IRQHandler
- B RTC_WKUP_IRQHandler
-
-
- PUBWEAK FLASH_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-FLASH_IRQHandler
- B FLASH_IRQHandler
-
-
- PUBWEAK RCC_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-RCC_IRQHandler
- B RCC_IRQHandler
-
-
- PUBWEAK EXTI0_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-EXTI0_IRQHandler
- B EXTI0_IRQHandler
-
-
- PUBWEAK EXTI1_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-EXTI1_IRQHandler
- B EXTI1_IRQHandler
-
-
- PUBWEAK EXTI2_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-EXTI2_IRQHandler
- B EXTI2_IRQHandler
-
-
- PUBWEAK EXTI3_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-EXTI3_IRQHandler
- B EXTI3_IRQHandler
-
-
- PUBWEAK EXTI4_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-EXTI4_IRQHandler
- B EXTI4_IRQHandler
-
-
- PUBWEAK DMA1_Channel1_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-DMA1_Channel1_IRQHandler
- B DMA1_Channel1_IRQHandler
-
-
- PUBWEAK DMA1_Channel2_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-DMA1_Channel2_IRQHandler
- B DMA1_Channel2_IRQHandler
-
-
- PUBWEAK DMA1_Channel3_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-DMA1_Channel3_IRQHandler
- B DMA1_Channel3_IRQHandler
-
-
- PUBWEAK DMA1_Channel4_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-DMA1_Channel4_IRQHandler
- B DMA1_Channel4_IRQHandler
-
-
- PUBWEAK DMA1_Channel5_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-DMA1_Channel5_IRQHandler
- B DMA1_Channel5_IRQHandler
-
-
- PUBWEAK DMA1_Channel6_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-DMA1_Channel6_IRQHandler
- B DMA1_Channel6_IRQHandler
-
-
- PUBWEAK DMA1_Channel7_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-DMA1_Channel7_IRQHandler
- B DMA1_Channel7_IRQHandler
-
-
- PUBWEAK ADC1_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-ADC1_IRQHandler
- B ADC1_IRQHandler
-
-
- PUBWEAK USB_HP_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-USB_HP_IRQHandler
- B USB_HP_IRQHandler
-
-
- PUBWEAK USB_LP_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-USB_LP_IRQHandler
- B USB_LP_IRQHandler
-
-
- PUBWEAK DAC_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-DAC_IRQHandler
- B DAC_IRQHandler
-
-
- PUBWEAK COMP_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-COMP_IRQHandler
- B COMP_IRQHandler
-
-
- PUBWEAK EXTI9_5_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-EXTI9_5_IRQHandler
- B EXTI9_5_IRQHandler
-
-
- PUBWEAK TIM9_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-TIM9_IRQHandler
- B TIM9_IRQHandler
-
-
- PUBWEAK TIM10_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-TIM10_IRQHandler
- B TIM10_IRQHandler
-
-
- PUBWEAK TIM11_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-TIM11_IRQHandler
- B TIM11_IRQHandler
-
-
- PUBWEAK TIM2_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-TIM2_IRQHandler
- B TIM2_IRQHandler
-
-
- PUBWEAK TIM3_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-TIM3_IRQHandler
- B TIM3_IRQHandler
-
-
- PUBWEAK TIM4_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-TIM4_IRQHandler
- B TIM4_IRQHandler
-
-
- PUBWEAK I2C1_EV_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-I2C1_EV_IRQHandler
- B I2C1_EV_IRQHandler
-
-
- PUBWEAK I2C1_ER_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-I2C1_ER_IRQHandler
- B I2C1_ER_IRQHandler
-
-
- PUBWEAK I2C2_EV_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-I2C2_EV_IRQHandler
- B I2C2_EV_IRQHandler
-
-
- PUBWEAK I2C2_ER_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-I2C2_ER_IRQHandler
- B I2C2_ER_IRQHandler
-
-
- PUBWEAK SPI1_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-SPI1_IRQHandler
- B SPI1_IRQHandler
-
-
- PUBWEAK SPI2_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-SPI2_IRQHandler
- B SPI2_IRQHandler
-
-
- PUBWEAK USART1_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-USART1_IRQHandler
- B USART1_IRQHandler
-
-
- PUBWEAK USART2_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-USART2_IRQHandler
- B USART2_IRQHandler
-
-
- PUBWEAK USART3_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-USART3_IRQHandler
- B USART3_IRQHandler
-
-
- PUBWEAK EXTI15_10_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-EXTI15_10_IRQHandler
- B EXTI15_10_IRQHandler
-
-
- PUBWEAK RTC_Alarm_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-RTC_Alarm_IRQHandler
- B RTC_Alarm_IRQHandler
-
-
- PUBWEAK USB_FS_WKUP_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-USB_FS_WKUP_IRQHandler
- B USB_FS_WKUP_IRQHandler
-
-
- PUBWEAK TIM6_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-TIM6_IRQHandler
- B TIM6_IRQHandler
-
-
- PUBWEAK TIM7_IRQHandler
- SECTION .text:CODE:REORDER:NOROOT(1)
-TIM7_IRQHandler
- B TIM7_IRQHandler
-
- END
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name : startup_stm32l152xc.s
+;* Author : MCD Application Team
+;* Version : V2.2.0
+;* Date : 01-July-2016
+;* Description : STM32L152XC Devices vector for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address.
+;* - Configure the system clock
+;* - Branches to main in the C library (which eventually
+;* calls main()).
+;* After Reset the Cortex-M3 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* © COPYRIGHT(c) 2016 STMicroelectronics
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;* 1. Redistributions of source code must retain the above copyright notice,
+;* this list of conditions and the following disclaimer.
+;* 2. Redistributions in binary form must reproduce the above copyright notice,
+;* this list of conditions and the following disclaimer in the documentation
+;* and/or other materials provided with the distribution.
+;* 3. Neither the name of STMicroelectronics nor the names of its contributors
+;* may be used to endorse or promote products derived from this software
+;* without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp
+ DCD RTC_WKUP_IRQHandler ; RTC Wakeup
+ DCD FLASH_IRQHandler ; FLASH
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line 0
+ DCD EXTI1_IRQHandler ; EXTI Line 1
+ DCD EXTI2_IRQHandler ; EXTI Line 2
+ DCD EXTI3_IRQHandler ; EXTI Line 3
+ DCD EXTI4_IRQHandler ; EXTI Line 4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_IRQHandler ; ADC1
+ DCD USB_HP_IRQHandler ; USB High Priority
+ DCD USB_LP_IRQHandler ; USB Low Priority
+ DCD DAC_IRQHandler ; DAC
+ DCD COMP_IRQHandler ; COMP through EXTI Line
+ DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
+ DCD 0 ; Reserved
+ DCD TIM9_IRQHandler ; TIM9
+ DCD TIM10_IRQHandler ; TIM10
+ DCD TIM11_IRQHandler ; TIM11
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
+ DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
+ DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend
+ DCD TIM6_IRQHandler ; TIM6
+ DCD TIM7_IRQHandler ; TIM7
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:REORDER:NOROOT(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+NMI_Handler
+ B NMI_Handler
+
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+HardFault_Handler
+ B HardFault_Handler
+
+
+ PUBWEAK MemManage_Handler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+MemManage_Handler
+ B MemManage_Handler
+
+
+ PUBWEAK BusFault_Handler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+BusFault_Handler
+ B BusFault_Handler
+
+
+ PUBWEAK UsageFault_Handler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+UsageFault_Handler
+ B UsageFault_Handler
+
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+SVC_Handler
+ B SVC_Handler
+
+
+ PUBWEAK DebugMon_Handler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DebugMon_Handler
+ B DebugMon_Handler
+
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+PendSV_Handler
+ B PendSV_Handler
+
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+SysTick_Handler
+ B SysTick_Handler
+
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+
+ PUBWEAK PVD_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+PVD_IRQHandler
+ B PVD_IRQHandler
+
+
+ PUBWEAK TAMPER_STAMP_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+TAMPER_STAMP_IRQHandler
+ B TAMPER_STAMP_IRQHandler
+
+
+ PUBWEAK RTC_WKUP_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_WKUP_IRQHandler
+ B RTC_WKUP_IRQHandler
+
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+
+ PUBWEAK EXTI0_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI0_IRQHandler
+ B EXTI0_IRQHandler
+
+
+ PUBWEAK EXTI1_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI1_IRQHandler
+ B EXTI1_IRQHandler
+
+
+ PUBWEAK EXTI2_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI2_IRQHandler
+ B EXTI2_IRQHandler
+
+
+ PUBWEAK EXTI3_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI3_IRQHandler
+ B EXTI3_IRQHandler
+
+
+ PUBWEAK EXTI4_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI4_IRQHandler
+ B EXTI4_IRQHandler
+
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+
+ PUBWEAK DMA1_Channel2_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel2_IRQHandler
+ B DMA1_Channel2_IRQHandler
+
+
+ PUBWEAK DMA1_Channel3_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel3_IRQHandler
+ B DMA1_Channel3_IRQHandler
+
+
+ PUBWEAK DMA1_Channel4_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel4_IRQHandler
+ B DMA1_Channel4_IRQHandler
+
+
+ PUBWEAK DMA1_Channel5_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel5_IRQHandler
+ B DMA1_Channel5_IRQHandler
+
+
+ PUBWEAK DMA1_Channel6_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel6_IRQHandler
+ B DMA1_Channel6_IRQHandler
+
+
+ PUBWEAK DMA1_Channel7_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DMA1_Channel7_IRQHandler
+ B DMA1_Channel7_IRQHandler
+
+
+ PUBWEAK ADC1_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+ADC1_IRQHandler
+ B ADC1_IRQHandler
+
+
+ PUBWEAK USB_HP_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+USB_HP_IRQHandler
+ B USB_HP_IRQHandler
+
+
+ PUBWEAK USB_LP_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+USB_LP_IRQHandler
+ B USB_LP_IRQHandler
+
+
+ PUBWEAK DAC_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+DAC_IRQHandler
+ B DAC_IRQHandler
+
+
+ PUBWEAK COMP_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+COMP_IRQHandler
+ B COMP_IRQHandler
+
+
+ PUBWEAK EXTI9_5_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI9_5_IRQHandler
+ B EXTI9_5_IRQHandler
+
+
+ PUBWEAK TIM9_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+TIM9_IRQHandler
+ B TIM9_IRQHandler
+
+
+ PUBWEAK TIM10_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+TIM10_IRQHandler
+ B TIM10_IRQHandler
+
+
+ PUBWEAK TIM11_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+TIM11_IRQHandler
+ B TIM11_IRQHandler
+
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+
+ PUBWEAK TIM4_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+TIM4_IRQHandler
+ B TIM4_IRQHandler
+
+
+ PUBWEAK I2C1_EV_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_EV_IRQHandler
+ B I2C1_EV_IRQHandler
+
+
+ PUBWEAK I2C1_ER_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+I2C1_ER_IRQHandler
+ B I2C1_ER_IRQHandler
+
+
+ PUBWEAK I2C2_EV_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_EV_IRQHandler
+ B I2C2_EV_IRQHandler
+
+
+ PUBWEAK I2C2_ER_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+I2C2_ER_IRQHandler
+ B I2C2_ER_IRQHandler
+
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+
+ PUBWEAK USART3_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+USART3_IRQHandler
+ B USART3_IRQHandler
+
+
+ PUBWEAK EXTI15_10_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+EXTI15_10_IRQHandler
+ B EXTI15_10_IRQHandler
+
+
+ PUBWEAK RTC_Alarm_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+RTC_Alarm_IRQHandler
+ B RTC_Alarm_IRQHandler
+
+
+ PUBWEAK USB_FS_WKUP_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+USB_FS_WKUP_IRQHandler
+ B USB_FS_WKUP_IRQHandler
+
+
+ PUBWEAK TIM6_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+TIM6_IRQHandler
+ B TIM6_IRQHandler
+
+
+ PUBWEAK TIM7_IRQHandler
+ SECTION .text:CODE:REORDER:NOROOT(1)
+TIM7_IRQHandler
+ B TIM7_IRQHandler
+
+ END
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/