plat/arm/board/arm_fpga: Initialize the System Counter

Fork: 0

LuminaSensum / arm-trusted-firmware

Browse code plat/arm/board/arm_fpga: Initialize the System Counter This sets the frequency of the system counter so that the Delay Timer driver programs the correct value to CNTCRL. This value depends on the FPGA image being used, and is 10MHz for the initial test image. Once configured, the BL31 platform setup sequence then enables the system counter. Signed-off-by: Oliver Swede <oli.swede@arm.com> Change-Id: Ieb036a36fd990f350b5953357424a255b8ac5d5a WIP_v2.3-LS master v2.4-LS v2.3-rc2 v2.3-rc1 v2.3-rc0 v2.3
1 parent 7ee4db6 commit 2d696d1811a370c742b69cf6442144d906a91d8c Oliver Swede authored on 2 Dec 2019

Browse code

This sets the frequency of the system counter so that the Delay Timer
driver programs the correct value to CNTCRL. This value depends on
the FPGA image being used, and is 10MHz for the initial test image.
Once configured, the BL31 platform setup sequence then enables the
system counter.

Signed-off-by: Oliver Swede <oli.swede@arm.com>
Change-Id: Ieb036a36fd990f350b5953357424a255b8ac5d5a

WIP_v2.3-LS master v2.4-LS v2.3-rc2 v2.3-rc1 v2.3-rc0 v2.3

1 parent 7ee4db6 commit 2d696d1811a370c742b69cf6442144d906a91d8c

Oliver Swede authored on 2 Dec 2019

Patch

Unified Split

Showing 2 changed files

Ignore Space Show notes View plat/arm/board/arm_fpga/fpga_bl31_setup.c

Ignore Space Show notes View plat/arm/board/arm_fpga/fpga_def.h

Show line notes below