SPM: Refactor entry and exit of the SP ...

Only use synchronous calls to enter the Secure Partition in order to
simplify the SMC handling code.

Change-Id: Ia501a045585ee0836b9151141ad3bd11d0971be2
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Merge pull request #1415 from antonio-nino-diaz-arm/an/spm-fixes ...

Minor fixes to SPM

xlat v2: Introduce xlat granule size helpers ...

The function xlat_arch_is_granule_size_supported() can be used to check
if a specific granule size is supported. In Armv8, AArch32 only supports
4 KiB pages. AArch64 supports 4 KiB, 16 KiB or 64 KiB depending on the
implementation, which is detected at runtime.

The function xlat_arch_get_max_supported_granule_size() returns the max
granule size supported by the implementation.

Even though right now they are only used by SPM, they may be useful in
other places in the future. This patch moves the code currently in SPM
to the xlat tables lib so that it can be reused.

Change-Id: If54624a5ecf20b9b9b7f38861b56383a03bbc8a4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Initialize SP args as expected by cm library ...

In the context management library, cm_setup_context() takes the
information in ep_info to fill the registers x0-x7. This patch replaces
the current code that sets them manually by the correct initialization
code.

Change-Id: Id1fdf4681b154026c2e3af1f9b05b19582b7d16d
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Fix MISRA Rule 5.7 Part 3 ...

Rule 5.7: A tag name shall be a unique identifier

Follow convention of shorter names for smaller scope to fix
violations of MISRA rule 5.7

Fixed For:
    make ARM_TSP_RAM_LOCATION=tdram LOG_LEVEL=50 PLAT=fvp SPD=opteed

Change-Id: I5fbb5d6ebddf169550eddb07ed880f5c8076bb76
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>

Fix MISRA Rule 5.3 Part 3 ...

Use a _ prefix for macro arguments to prevent that argument from
hiding variables of the same name in the outer scope

Rule 5.3: An identifier declared in an inner scope shall not
          hide an identifier declared in an outer scope

Fixed For:
    make PLAT=fvp SPD=tspd

Change-Id: I2d711b9584c4cb9ba3814ecd2ca65a42b7e24179
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>

SDEI: Ensure SDEI handler executes with CVE-2018-3639 mitigation enabled ...

When dynamic mitigation is used, the SDEI handler is required to
execute with the mitigation enabled by default, regardless of the
mitigation state for lower ELs.  This means that if the kernel or
hypervisor explicitly disables the mitigation and then later when the
event is dispatched, the dispatcher will remember the mitigation state
for the lower ELs but force the mitigation to be on during the SDEI
handler execution.  When the SDEI handler returns, it will restore the
mitigation state.

This behaviour is described in "Firmware interfaces for mitigating
cache speculation vulnerabilities System Software on Arm Systems"[0].

[0] https://developer.arm.com/cache-speculation-vulnerability-firmware-specification

Change-Id: I8dd60b736be0aa9e832b0f92d67a401fdeb417f4
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Merge pull request #1392 from dp-arm/dp/cve_2018_3639 ...

Implement workaround for CVE-2018-3639 on Cortex A57/A72/A73 and A75

SPM: Extract code out of the SMC handler ...

Simplify the code of the SMC handler by extracting the code of
SP_EVENT_COMPLETE and MM_COMMUNICATE.

Change-Id: I9250a3f5e4b807b35c9d044592c1074a45ab9a07
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Replace SP init flag by generic state enum ...

Instead of just knowing if the Secure Partition is being initialized or
not, this generic state enum can be used to tell if the Secure Partition
is busy and to add more states in the future if needed.

Also, the spinlock of the secure_partition_context_t structure now only
protects against concurrent accesses to the state of the secure
partition. Previously, it used to lock down the whole structure, thus
preventing one CPU to access any of its fields while another CPU was
executing the partition.

Change-Id: I51215328e2ca8ea2452f92e4a1cb237415958b22
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Shorten names of types and functions ...

The current internal names are too long, which makes it hard to write
code as many lines overflow the limit and need to be split, which may
not help the reader.

Change-Id: I072bdc8f3dd125255063ffa7f02500e5228fc9a1
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Move xlat-related functions to separate file ...

This is done in order to make it easier to read the file spm_main.c.

Change-Id: I21e765154c1682a319a3bc47a19a42fd736e910e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Move all SP-related info to SP context struct ...

Move all information related to a Secure Partition to the struct
secure_partition_context_t.

This requires an in-depth refactor because most of the previous code of
SPM relied on global information.

Change-Id: I0a23e93817dcc191ce1d7506b8bc671d376123c4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Add support for dynamic mitigation for CVE-2018-3639 ...

Some CPUS may benefit from using a dynamic mitigation approach for
CVE-2018-3639.  A new SMC interface is defined to allow software
executing in lower ELs to enable or disable the mitigation for their
execution context.

It should be noted that regardless of the state of the mitigation for
lower ELs, code executing in EL3 is always mitigated against
CVE-2018-3639.

NOTE: This change is a compatibility break for any platform using
the declare_cpu_ops_workaround_cve_2017_5715 macro.  Migrate to
the declare_cpu_ops_wa macro instead.

Change-Id: I3509a9337ad217bbd96de9f380c4ff8bf7917013
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Implement static workaround for CVE-2018-3639 ...

For affected CPUs, this approach enables the mitigation during EL3
initialization, following every PE reset. No mechanism is provided to
disable the mitigation at runtime.

This approach permanently mitigates the entire software stack and no
additional mitigation code is required in other software components.

TF-A implements this approach for the following affected CPUs:

*   Cortex-A57 and Cortex-A72, by setting bit 55 (Disable load pass store) of
    `CPUACTLR_EL1` (`S3_1_C15_C2_0`).

*   Cortex-A73, by setting bit 3 of `S3_0_C15_C0_0` (not documented in the
    Technical Reference Manual (TRM)).

*   Cortex-A75, by setting bit 35 (reserved in TRM) of `CPUACTLR_EL1`
    (`S3_0_C15_C1_0`).

Additionally, a new SMC interface is implemented to allow software
executing in lower ELs to discover whether the system is mitigated
against CVE-2018-3639.

Refer to "Firmware interfaces for mitigating cache speculation
vulnerabilities System Software on Arm Systems"[0] for more
information.

[0] https://developer.arm.com/cache-speculation-vulnerability-firmware-specification

Change-Id: I084aa7c3bc7c26bf2df2248301270f77bed22ceb
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Rename symbols and files relating to CVE-2017-5715 ...

This patch renames symbols and files relating to CVE-2017-5715 to make
it easier to introduce new symbols and files for new CVE mitigations.

Change-Id: I24c23822862ca73648c772885f1690bed043dbc7
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

SPM: Do not trap S-EL0 access to SVE/SIMD/FP regs ...

This allows secure partitions to access these registers. This is
needed in some cases. For example, it has been reported that in order
to implement secure storage services, a secure partition needs to
encrypt/decrypt some authentication variables, which requires FP/SIMD
support.

Note that SPM will not do any saving/restoring of these registers on
behalf of the SP. This falls under the SP's responsibility.

Also note that if the SP gets preempted, it might not get a chance to
save/restore FP/SIMD registers first. This patch does not address this
problem. It only serves as a temporary solution to unblock development
on the secure partition side.

Change-Id: I3b8ccdebdac0219f6ac96ad66ab2be0be8374ad3
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

types: use int-ll64 for both aarch32 and aarch64 ...

Since commit 031dbb122472 ("AArch32: Add essential Arch helpers"),
it is difficult to use consistent format strings for printf() family
between aarch32 and aarch64.

For example, uint64_t is defined as 'unsigned long long' for aarch32
and as 'unsigned long' for aarch64.  Likewise, uintptr_t is defined
as 'unsigned int' for aarch32, and as 'unsigned long' for aarch64.

A problem typically arises when you use printf() in common code.

One solution could be, to cast the arguments to a type long enough
for both architectures.  For example, if 'val' is uint64_t type,
like this:

  printf("val = %llx\n", (unsigned long long)val);

Or, somebody may suggest to use a macro provided by <inttypes.h>,
like this:

  printf("val = %" PRIx64 "\n", val);

But, both would make the code ugly.

The solution adopted in Linux kernel is to use the same typedefs for
all architectures.  The fixed integer types in the kernel-space have
been unified into int-ll64, like follows:

    typedef signed char           int8_t;
    typedef unsigned char         uint8_t;

    typedef signed short          int16_t;
    typedef unsigned short        uint16_t;

    typedef signed int            int32_t;
    typedef unsigned int          uint32_t;

    typedef signed long long      int64_t;
    typedef unsigned long long    uint64_t;

[ Linux commit: 0c79a8e ]

This gets along with the codebase shared between 32 bit and 64 bit,
with the data model called ILP32, LP64, respectively.

The width for primitive types is defined as follows:

                   ILP32           LP64
    int            32              32
    long           32              64
    long long      64              64
    pointer        32              64

'long long' is 64 bit for both, so it is used for defining uint64_t.
'long' has the same width as pointer, so for uintptr_t.

We still need an ifdef conditional for (s)size_t.

All 64 bit architectures use "unsigned long" size_t, and most 32 bit
architectures use "unsigned int" size_t.  H8/300, S/390 are known as
exceptions; they use "unsigned long" size_t despite their architecture
is 32 bit.

One idea for simplification might be to define size_t as 'unsigned long'
across architectures, then forbid the use of "%z" string format.
However, this would cause a distortion between size_t and sizeof()
operator.  We have unknowledge about the native type of sizeof(), so
we need a guess of it anyway.  I want the following formula to always
return 1:

  __builtin_types_compatible_p(size_t, typeof(sizeof(int)))

Fortunately, ARM is probably a majority case.  As far as I know, all
32 bit ARM compilers use "unsigned int" size_t.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Fix pointer type mismatch of handlers ...

Commit 4c0d03907652 ("Rework type usage in Trusted Firmware") changed
the type usage in struct declarations, but did not touch the definition
side.  Fix the type mismatch.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

spd: add static qualifier to locally used functions and data ...

These are used locally in a file.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Merge pull request #1357 from antonio-nino-diaz-arm/an/fix-misra ...

Fix some MISRA defects in SPM code

Fix some MISRA defects in SPM code ...

Change-Id: I989c1f4aef8e3cb20d5d19e6347575e6449bb60b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Merge pull request #1356 from robertovargas-arm/misra-changes ...

Misra changes

Fix MISRA rule 8.4 Part 3 ...

Rule 8.4: A compatible declaration shall be visible when
          an object or function with external linkage is defined

Fixed for:
	make DEBUG=1 PLAT=fvp SPD=tspd all

Change-Id: I0a16cf68fef29cf00ec0a52e47786f61d02ca4ae
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

Fix MISRA rule 8.3 Part 3 ...

Rule 8.3: All declarations of an object or function shall
          use the same names and type qualifiers

Fixed for:
	make DEBUG=1 PLAT=fvp SPD=tspd all

Change-Id: I4e31c93d502d433806dfc521479d5d428468b37c
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

Fixup SMCCC_FEATURES return value for SMCCC_ARCH_WORKAROUND_1 ...

Only return -1 if the workaround for CVE-2017-5715 is not compiled in.

Change-Id: I1bd07c57d22b4a13cf51b35be141a1f1ffb065ff
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Merge pull request #1313 from jonathanwright-ARM/jw/MISRA-switch-statements ...

Fix switch statements to comply with MISRA rules

Merge pull request #1335 from JoelHutton/jh/cleanup_void_pointers ...

Clean usage of void pointers to access symbols

Clean usage of void pointers to access symbols ...

Void pointers have been used to access linker symbols, by declaring an
extern pointer, then taking the address of it. This limits symbols
values to aligned pointer values. To remove this restriction an
IMPORT_SYM macro has been introduced, which declares it as a char
pointer and casts it to the required type.

Change-Id: I89877fc3b13ed311817bb8ba79d4872b89bfd3b0
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

services: fix switch statements to comply with MISRA rules ...

Ensure (where possible) that switch statements in services comply with
MISRA rules 16.1 - 16.7.

Change-Id: I47bf6ed4a026201e6fe125ce51842482e99e8bb0
Signed-off-by: Jonathan Wright <jonathan.wright@arm.com>