LuminaSensum/arm-trusted-firmware

Fork: 0

LuminaSensum / arm-trusted-firmware

History for arm-trusted-firmware / plat

2016-04-27	21a3973 Browse files » Remove support for legacy VE memory map in FVP ... This patch removes support for legacy Versatile Express memory map for the GIC peripheral in the FVP platform. The user guide is also updated for the same. Change-Id: Ib8cfb819083aca359e5b46b5757cb56cb0ea6533 Soby Mathew committed on 27 Apr 2016
2016-04-26	1969625 Browse files » Conditionally compile `plat_get_syscnt_freq()` in ARM standard platforms ... This patch puts the definition of `plat_get_syscnt_freq()` under `#ifdef ARM_SYS_CNTCTL_BASE` in arm_common.c file. This is the fix for compilation error introduced by commit-id `749ade4`, for platforms that use arm_common.c but do not provide a memory mapped interface to the generic counter. Fixes ARM-software/tf-issues#395 Change-Id: I2f2b10bd9500fa15308541ccb15829306a76a745 Yatharth Kochar committed on 26 Apr 2016
2016-04-25	3f84cec Browse files » Merge pull request #602 from rockchip-linux/fixes-for-coreboot_v1 ... rockchip: fixes for the required danh-arm committed on 25 Apr 2016
2016-04-25	0c05748 Browse files » rockchip: fixes for the required ... This patch has the following change for rk3399. * Set the uart to 115200 since the loader decide to set uart baud to 115200Hz. So the ATF also should set uart baud to 115200. * We need ensure the bl31 base is greater than 4KB since there are have the shared mem for coreboot.(Note: the previous vesion was tested with uboot) Otherwise, we will happen the exception crash since the ddr area won't to work from the shared ram address in some cases. For example, the exception crash: CBFS: Found @ offset 19c80 size 24074 exception _sync_sp_el0 ELR = 0x0000000000008000 ESR = 0x0000000002000000 SPSR = 0x600003cc FAR = 0xffffffff00000000 SP = 0x00000000ff8ed230 ... X29 = 0x00000000ff8c1fc0 X30 = 0x000000000030e3b0 exception death Change-Id: I8bc557c6bcaf6804d2a313b38667d3e2517881d7 Signed-off-by: Caesar Wang <wxt@rock-chips.com> Caesar Wang committed on 25 Apr 2016
2016-04-21	c073fda Browse files » Move `plat_get_syscnt_freq()` to arm_common.c ... This patch moves the definition for `plat_get_syscnt_freq()` from arm_bl31_setup.c to arm_common.c. This could be useful in case a delay timer needs to be installed based on the generic timer in other BLs. This patch also modifies the return type for this function from `uint64_t` to `unsigned long long` within ARM and other platform files. Change-Id: Iccdfa811948e660d4fdcaae60ad1d700e4eda80d Yatharth Kochar committed on 21 Apr 2016
2016-04-14	9ff67fa Browse files » Dump platform-defined regs in crash reporting ... It is up to the platform to implement the new plat_crash_print_regs macro to report all relevant platform registers helpful for troubleshooting. plat_crash_print_regs merges or calls previously defined plat_print_gic_regs and plat_print_interconnect_regs macros for each existing platforms. NOTE: THIS COMMIT REQUIRES ALL PLATFORMS THAT ENABLE THE `CRASH_REPORTING` BUILD FLAG TO MIGRATE TO USE THE NEW `plat_crash_print_regs()` MACRO. BY DEFAULT, `CRASH_REPORTING` IS ENABLED IN DEBUG BUILDS FOR ALL PLATFORMS. Fixes: arm-software/tf-issues#373 Signed-off-by: Gerald Lejeune <gerald.lejeune@st.com> Gerald Lejeune committed on 14 Apr 2016
	df03c6e Browse files » Merge pull request #593 from mtk09422/mtcmos-fix ... mt8173: Fix timing issue of mfg mtcmos power off danh-arm committed on 14 Apr 2016
	8c9130c Browse files » mt8173: Fix timing issue of mfg mtcmos power off ... In mt8173, there are totally 10 non-cpu mtcmos, so we cannot tell if SPM finished the power control flow by 10 status bits of PASR_PDP_3. So, extend PASR_PDP_3 status bits from 10 to 20 so that we can make sure if the control action has been done precisely. Change-Id: Ifd4faaa4173c6e0543aa8471149adb9fe7fadedc Signed-off-by: Fan Chen <fan.chen@mediatek.com> Fan Chen authored on 1 Apr 2016 Yidi Lin committed on 14 Apr 2016
2016-04-13	3e4b8fd Browse files » Migrate platform ports to the new xlat_tables library ... This patch modifies the upstream platform port makefiles to use the new xlat_tables library files. This patch also makes mmap region setup common between AArch64 and AArch32 for FVP platform port. The file `fvp_common.c` is moved from the `plat/arm/board/fvp/aarch64` folder to the parent folder as it is not specific to AArch64. Change-Id: Id2e9aac45e46227b6f83cccfd1e915404018ea0b Soby Mathew committed on 13 Apr 2016
2016-04-12	000bc45 Browse files » Fix build error in Rockchip platform ... This patch fixes the compilation error in Rockchip rk3368 platform port when it is built in release mode. Fixes ARM-software/tf-issues#389 Change-Id: I1a3508ac3a620289cf700e79db8f08569331ac53 Soby Mathew committed on 12 Apr 2016
2016-04-08	5d787dd Browse files » Merge pull request #569 from Xilinx/zynqmp-v1 ... Support for Xilinx Zynq UltraScale+ MPSoC danh-arm committed on 8 Apr 2016
	c71a87a Browse files » Merge pull request #587 from antonio-nino-diaz-arm/an/rename-bl33-base ... Rename BL33_BASE and make it work with RESET_TO_BL31 danh-arm committed on 8 Apr 2016
	b2c9687 Browse files » Merge pull request #586 from antonio-nino-diaz-arm/an/spd-bl32 ... Remove BL32_BASE when building without SPD for FVP danh-arm committed on 8 Apr 2016
	68450a6 Browse files » Rename BL33_BASE option to PRELOADED_BL33_BASE ... To avoid confusion the build option BL33_BASE has been renamed to PRELOADED_BL33_BASE, which is more descriptive of what it does and doesn't get mistaken by similar names like BL32_BASE that work in a completely different way. NOTE: PLATFORMS USING BUILD OPTION `BL33_BASE` MUST CHANGE TO THE NEW BUILD OPTION `PRELOADED_BL33_BASE`. Change-Id: I658925ebe95406edf0325f15aa1752e1782aa45b Antonio Nino Diaz committed on 8 Apr 2016
	d5d6b89 Browse files » Fix BL33_BASE option to work with RESET_TO_BL31 ... The BL33 address is now set in arm_bl31_early_platform_setup() so that the preloaded BL33 boot option is available when RESET_TO_BL31 is also used. Change-Id: Iab93e3916f9199c3387886b055c7cd2315efed29 Antonio Nino Diaz committed on 8 Apr 2016
	81d139d Browse files » Remove BL32_BASE when building without SPD for FVP ... Previously, when building TF without SPD support, BL2 tried to load a BL32 image from the FIP and fails to find one, which resulted on warning messages on the console. Even if there is a BL32 image in the FIP it shouldn't be loaded because there is no way to transfer control to the Secure Payload without SPD support. The Makefile has been modified to pass a define of the form SPD_${SPD} to the source code the same way it's done for PLAT. The define SPD_none is then used to undefine BL32_BASE when BL32 is not used to prevent BL2 from trying to load a BL32 image and failing, thus removing the warning messages mentioned above. Fixes ARM-software/tf-issues#287 Change-Id: Ifeb6f1c26935efb76afd353fea88e87ba09e9658 Antonio Nino Diaz committed on 8 Apr 2016
2016-04-07	0892f6b Browse files » Merge pull request #583 from mtk09422/fix-build-error ... mt8173: fix spm driver build errors danh-arm committed on 7 Apr 2016
	105b59e Browse files » Merge pull request #575 from soby-mathew/sm/new_tzc_driver ... Refactor the TZC driver and add DMC-500 driver danh-arm committed on 7 Apr 2016
	5d29c76 Browse files » Merge pull request #572 from jcastillo-arm/jc/tbb_nvcounter ... TBB NVcounter support danh-arm committed on 7 Apr 2016
	3454fde Browse files » mt8173: fix spm driver build errors ... To fix build errors in following build conditions, DEBUG=1 LOG_LEVEL<40 DEBUG=0 LOG_LEVEL>=40 Change-Id: Ib34aed07b2ae0abd8a3a46948adc9fbeaae715aa Signed-off-by: yt.lee <yt.lee@mediatek.com> yt.lee authored on 7 Apr 2016 Yidi Lin committed on 7 Apr 2016
2016-04-06	c828440 Browse files » Add support for Xilinx Zynq UltraScale+ MPSOC ... The Xilinx Zynq UltraScale+ MPSOC containes a quad A53 cluster. This patch adds the platform port for that SoC. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Soren Brinkmann committed on 6 Apr 2016
2016-04-06	61dbb02 Browse files » Merge pull request #581 from rockchip-linux/rockchip-atf-20160405 ... Support for Rockchip's family SoCs danh-arm committed on 6 Apr 2016
2016-04-04	6fba6e0 Browse files » Support for Rockchip's family SoCs ... This patch adds to support the RK3368 and RK3399 SoCs. RK3368/RK3399 is one of the Rockchip family SoCs, which is an multi-cores ARM SoCs. This patch adds support to boot the Trusted Firmware on RK3368/RK3399 SoCs, and adds support to boot secondary CPUs, enter/exit core power states for all CPUs in the slow/fast clusters. This is the initial version for rockchip SoCs.(RK3368/RK3399 and next SoCs) * Support arm gicv2 & gicv3. * Boot up multi-cores CPU. * Add generic CPU helper functions. * Support suspend/resume. * Add system_off & system_reset implementation. * Add delay timer platform implementation. * Support the new porting interface for the PSCI implementation. Change-Id: I704bb3532d65e8c70dbd99b512c5e6e440ea6f43 Signed-off-by: Tony Xie <tony.xie@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Shengfei xu <xsf@rock-chips.com> Tony Xie authored on 15 Jan 2016 Caesar Wang committed on 4 Apr 2016
2016-04-04	af711c1 Browse files » Merge pull request #580 from soby-mathew/sm/ret_type_plat_ns_ep ... Modify return type of plat_get_ns_image_entrypoint() danh-arm committed on 4 Apr 2016
2016-04-01	21aa752 Browse files » arm: common: Make timer configuration conditional ... Make the timer configuration conditional on the optional interface being available. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Soren Brinkmann committed on 1 Apr 2016
	a0ad601 Browse files » Modify return type of plat_get_ns_image_entrypoint() ... This patch modifies the return type of the platform API `plat_get_ns_image_entrypoint()` from `unsigned long` to `uintptr_t` in accordance with the coding guidelines. Change-Id: Icb4510ca98b706aa4d535fe27e203394184fb4ca Soby Mathew committed on 1 Apr 2016
	f501712 Browse files » Merge pull request #576 from mtk09422/bl31-security ... mt8173: Protect BL31 memory from non-secure access danh-arm committed on 1 Apr 2016
	a1e0c01 Browse files » mt8173: Protect BL31 memory from non-secure access ... BL31 usually handles confidential stuff, its memory must not be read/write accessible from non-secure world. This patch protects the BL31 memory range from non-secure read/write access. Change-Id: I442fb92b667bb2f9a62d471a90508b1ba4489911 Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com> Jimmy Huang authored on 29 Mar 2016 Yidi Lin committed on 1 Apr 2016
2016-03-31	618f0fe Browse files » Add support to program a DMC-500 TZC on ARM platforms ... This patch adds support to program TrustZone protection on ARM platforms that implement a DMC-500. arm_dmc_500.c has been added which implements the arm_dmc_tzc_setup() function. This function relies on constants related to TZC programming that are exported by each platform to program TrustZone protection using the DMC-500 TrustZone controller driver. This function should be called from plat_arm_security_setup() which is implemented by each platform. Change-Id: I5400bdee9e4b29155fd11296a40693d512312f29 Vikram Kanigiri authored on 29 Jan 2016 Soby Mathew committed on 31 Mar 2016
2016-03-31	57f7820 Browse files » Migrate ARM standard platforms to the refactored TZC driver ... This patch migrates ARM Standard platforms to the refactored TZC driver. Change-Id: I2a2f60b645f73e14d8f416740c4551cec87cb1fb Soby Mathew committed on 31 Mar 2016