xlat v2: Support mapping regions with allocated VA ...

Provide new APIs to add new regions without specifying the base VA.

- `mmap_add_region_alloc_va` adds a static region to mmap choosing as
  base VA the first possible address after all the currently mapped
  regions. It is aligned to an appropriate boundary in relation to the
  size and base PA of the requested region. No attempt is made to fill
  any unused VA holes.

- `mmap_add_dynamic_region_alloc_va` it adds a region the same way as
  `mmap_add_region_alloc_va` does, but it's dynamic instead of static.

- `mmap_add_alloc_va` takes an array of non const `mmap_region_t`,
  maps them in the same way as `mmap_add_region_alloc_va` and fills
  their `base_va` field. A helper macro has been created to help create
  the array, called `MAP_REGION_ALLOC_VA`.

Change-Id: I5ef3f82ca0dfd0013d2e8034aa22f13ca528ba37
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

PIE: Use PC relative adrp/adr for symbol reference ...

This patch fixes up the AArch64 assembly code to use
adrp/adr instructions instead of ldr instruction for
reference to symbols. This allows these assembly
sequences to be Position Independant. Note that the
the reference to sizes have been replaced with
calculation of size at runtime. This is because size
is a constant value and does not depend on execution
address and using PC relative instructions for loading
them makes them relative to execution address. Also
we cannot use `ldr` instruction to load size as it
generates a dynamic relocation entry which must *not*
be fixed up and it is difficult for a dynamic loader
to differentiate which entries need to be skipped.

Change-Id: I8bf4ed5c58a9703629e5498a27624500ef40a836
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

xlat: Fix compatibility between v1 and v2 ...

There are several platforms using arm_setup_page_tables(), which is
supposed to be Arm platform only. This creates several dependency
problems between platforms.

This patch adds the definition XLAT_TABLES_LIB_V2 to the xlat tables lib
v2 makefile. This way it is possible to detect from C code which version
is being used and include the correct header.

The file arm_xlat_tables.h has been renamed to xlat_tables_compat.h and
moved to a common folder. This way, when in doubt, this header can be
used to guarantee compatibility, as it includes the correct header based
on XLAT_TABLES_LIB_V2.

This patch also removes the usage of ARM_XLAT_TABLES_V1 from QEMU (so
that is now locked in xlat lib v2) and ZynqMP (where it was added as a
workaround).

Change-Id: Ie1e22a23b44c549603d1402a237a70d0120d3e04
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

xlat: Fix checks in mmap_add() and mmap_add_ctx() ...

Commit 79621f0 broke sgi575.

It is possible to have a region with 0 as value for the attributes. It
means device memory, read only, secure, executable. This is legitimate
if the code is in flash and the code is executed from there.

This is the case for SGI_MAP_FLASH0_RO, defined in the file
plat/arm/css/sgi/sgi_plat.c.

This problem is solved by checking both size and attributes in xlat v1.
In xlat v2, it is enough to check the granularity, as it can never be 0.

Change-Id: I7be11f1b0e51c4c2ffd560b4a6cdfbf15de2c276
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Mark xlat tables initialization code ...

Mark the xlat tables code only used in BL31 initialization as
__init to be reclaimed once no longer needed

Change-Id: I3106bfd994706a57c578624573bcfa525fbbd3c4
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>

xlat: Change check in mmap_add and mmap_add_ctx() ...

Depending on the build flags it is possible that some of the memory
regions mapped in page table setup could have a size of 0. In this
case we simply want to do nothing but still wish to map the other
regions in the array. Therefore we cannot only use size == 0 as
the termination logic for the loop.

Since an attributes field with value 0 means that the region is
device memory, read only, secure and executable. Device memory
can't be executable, so this combination should never be used
and it is safe to use as a terminator value.

Therefore by changing the termination logic to use attributes
instead of size we prevent terminating the loop when we don't
intend to.

Change-Id: I92fc7f689ab08543497be6be4896dace2ed7b66a
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>

xlat: Remove deprecated interfaces ...

Change-Id: I83de2ae3e0795e6fec3c1e5b37c441b64b0c9cb6
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

libc: Use printf and snprintf across codebase ...

tf_printf and tf_snprintf are now called printf and snprintf, so the
code needs to be updated.

Change-Id: Iffeee97afcd6328c4c2d30830d4923b964682d71
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

libc: Fix all includes in codebase ...

The codebase was using non-standard headers. It is needed to replace
them by the correct ones so that we can use the new libc headers.

Change-Id: I530f71d9510cb036e69fe79823c8230afe890b9d
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

xlat v2: Support the EL2 translation regime ...

The translation library is useful elsewhere. Even though this repository
doesn't exercise the EL2 support of the library, it is better to have it
here as well to make it easier to maintain.

enable_mmu_secure() and enable_mmu_direct() have been deprecated. The
functions are still present, but they are behind ERROR_DEPRECATED and
they call the new functions enable_mmu_svc_mon() and
enable_mmu_direct_svc_mon().

Change-Id: I13ad10cd048d9cc2d55e0fff9a5133671b67dcba
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

xlat v2: Flush xlat tables after being modified ...

During cold boot, the initial translation tables are created with data
caches disabled, so all modifications go to memory directly. After the
MMU is enabled and data cache is enabled, any modification to the tables
goes to data cache, and eventually may get flushed to memory.

If CPU0 modifies the tables while CPU1 is off, CPU0 will have the
modified tables in its data cache. When CPU1 is powered on, the MMU is
enabled, then it enables coherency, and then it enables the data cache.
Until this is done, CPU1 isn't in coherency, and the translation tables
it sees can be outdated if CPU0 still has some modified entries in its
data cache.

This can be a problem in some cases. For example, the warm boot code
uses only the tables mapped during cold boot, which don't normally
change. However, if they are modified (and a RO page is made RW, or a XN
page is made executable) the CPU will see the old attributes and crash
when it tries to access it.

This doesn't happen in systems with HW_ASSISTED_COHERENCY or
WARMBOOT_ENABLE_DCACHE_EARLY. In these systems, the data cache is
enabled at the same time as the MMU. As soon as this happens, the CPU is
in coherency.

There was an attempt of a fix in psci_helpers.S, but it didn't solve the
problem. That code has been deleted. The code was introduced in commit
<264410306381> ("Invalidate TLB entries during warm boot").

Now, during a map or unmap operation, the memory associated to each
modified table is flushed. Traversing a table will also flush it's
memory, as there is no way to tell in the current implementation if the
table that has been traversed has also been modified.

Change-Id: I4b520bca27502f1018878061bc5fb82af740bb92
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

xlat v2: Cleanup get/change mem attr helpers ...

Changed the names for consistency with the rest of the library. Introduced
new helpers that manipulate the active translation tables context.

Change-Id: Icaca56b67fcf6a96e88aa3c7e47411162e8e6856
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

xlat: Use bool instead of int ...

Change-Id: I35d5b6a7c219f6f38983b30f157c1ed3808af17f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

xlat: Fix MISRA defects ...

Fix defects of MISRA C-2012 rules 8.13, 10.1, 10.3, 10.4, 10.8, 11.6,
14.4, 15.7, 17.8, 20.10, 20.12, 21.1 and Directive 4.9.

Change-Id: I7ff61e71733908596dbafe2e99d99b4fce9765bd
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

xlat: Remove references to the Trusted Firmware ...

This library can be used in other projects. All comments that talk about
the Trusted Firmware should be talking about the library itself.

Change-Id: I3b98d42f7132be72c1f8a4900acfaa78dbd2daa2
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

xlat v2: Make setup_mmu_config public ...

This allows other parts of the code to reuse it. No functional changes.

Change-Id: Ib052ae235c422d9179958bd3016c3e678779ae9b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

xlat v2: Turn MMU parameters into 64-bit values ...

Most registers are 64-bit wide, even in AArch32 mode:

- MAIR_ELx is equivalent to MAIR0 and MAIR1.
- TTBR is 64 bit in both AArch64 and AArch32.

The only difference is the TCR register, which is 32 bit in AArch32 and
in EL3 in AArch64. For consistency with the rest of ELs in AArch64, it
makes sense to also have it as a 64-bit value.

Change-Id: I2274d66a28876702e7085df5f8aad0e7ec139da9
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

xlat v2: Remove IMAGE_EL define ...

The Exception Level is now detected at runtime. This means that it is not
needed to hardcode the EL used by each image.

This doesn't result in a substantial increase of the image size because
the initialization functions that aren't used are garbage-collected by
the linker.

In AArch32 the current EL has been changed from EL3 to EL1 because the
the AArch32 PL1&0 translation regime behaves more like the AArch64 EL1&0
translation regime than the EL3 one.

Change-Id: I941404299ebe7666ca17619207c923b49a55cb73
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

xlat v2: Remove unused tlbi helper ...

xlat_arch_tlbi_va_regime() isn't used, so it has been renamed to
xlat_arch_tlbi_va() and the previous implementation has been removed.

Change-Id: Ic118bed3fb68234748d86b2e9e95b25650289276
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

xlat v2: Remove architectural headers ...

They only contained one function that is easily integrated in the private
library header and the existing architectural C files.

This also helps making the library more portable, as the Makefile of the
library now doesn't use the variable INCLUDES, which is specific to this
codebase and doesn't respect the namespace of the library.

Change-Id: I22228e6a97e9b4f346f5cd8947609263e8df71d8
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

xlat v2: Make get/set attrs functions less verbose ...

It is useful to have LOG_LEVEL_VERBOSE because it prints the memory map
of each image, but that also means that the change_mem_attributes and
get_mem_attributes functions have verbose prints, and generate a too
long text output that hides other useful information.

As they were mostly there for debug purposes, this patch removes them.

Change-Id: I2986537377d1f78be2b79cc8a6cf230c380bdb55
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

xlat v2: Clean debug xlat tables descriptor print ...

The previous debug output for EL1&0 translation regimes was too verbose,
which makes it hard to read and hides the intent behind the parameters
assigned to each region. This patch simplifies this output and makes the
outputs for EL3 and EL1&0 mostly the same. The difference is that in
EL1&0 it is specified whether the region is exclusively accessible from
EL1 (PRIV) or both EL0 and EL1 (USER).

For example:

    MEM-RW(PRIV)-NOACCESS(USER)-XN(PRIV)-XN(USER)-S
    MEM-RO(PRIV)-NOACCESS(USER)-EXEC(PRIV)-EXEC(USER)-S

After the change, it becomes this:

    MEM-RW-XN-PRIV-S
    MEM-RO-EXEC-PRIV-S

Change-Id: I15f4b99058429d42107fbf89e15f4838a9b559a5
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

xlat v2: Split code into separate files ...

Instead of having one big file with all the code, it's better to have
a few smaller files that are more manageable:

- xlat_tables_core.c: Code related to the core functionality of the
  library (map and unmap regions, initialize xlat context).
- xlat_tables_context.c: Instantiation of the active image context
  as well as APIs to manipulate it.
- xlat_tables_utils.c: Helper code that isn't part of the core
  functionality (change attributes, debug print messages).

Change-Id: I3ea956fc1afd7473c0bb5e7c6aab3b2e5d88c711
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

xlat v2: Split MMU setup and enable ...

At present, the function provided by the translation library to enable
MMU constructs appropriate values for translation library, and programs
them to the right registers. The construction of initial values,
however, is only required once as both the primary and secondaries
program the same values.

Additionally, the MMU-enabling function is written in C, which means
there's an active stack at the time of enabling MMU. On some systems,
like Arm DynamIQ, having active stack while enabling MMU during warm
boot might lead to coherency problems.

This patch addresses both the above problems by:

  - Splitting the MMU-enabling function into two: one that sets up
    values to be programmed into the registers, and another one that
    takes the pre-computed values and writes to the appropriate
    registers. With this, the primary effectively calls both functions
    to have the MMU enabled, but secondaries only need to call the
    latter.

  - Rewriting the function that enables MMU in assembly so that it
    doesn't use stack.

This patch fixes a bunch of MISRA issues on the way.

Change-Id: I0faca97263a970ffe765f0e731a1417e43fbfc45
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

xlat: Remove mmap_attr_t enum type ...

The values defined in this type are used in logical operations, which
goes against MISRA Rule 10.1: "Operands shall not be of an inappropriate
essential type".

Now, `unsigned int` is used instead. This also allows us to move the
dynamic mapping bit from 30 to 31. It was an undefined behaviour in the
past because an enum is signed by default, and bit 31 corresponds to the
sign bit. It is undefined behaviour to modify the sign bit. Now, bit 31
is free to use as it was originally meant to be.

mmap_attr_t is now defined as an `unsigned int` for backwards
compatibility.

Change-Id: I6b31218c14b9c7fdabebe432de7fae6e90a97f34
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

xlat_v2: Fix descriptor debug print ...

The XN, PXN and UXN bits are part of the upper attributes, not the
lower attributes.

Change-Id: Ia5e83f06f2a8de88b551f55f1d36d694918ccbc0
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Merge pull request #1420 from Yann-lms/mm_cursor_size_check ...

xlat_v2: add a check on mm_cursor->size to avoid infinite loop

Merge pull request #1415 from antonio-nino-diaz-arm/an/spm-fixes ...

Minor fixes to SPM

xlat_v2: add a check on mm_cursor->size to avoid infinite loop ...

The issue can occur if end_va is equal to the max architecture address,
and when mm_cursor point to the last entry of mmap_region_t table: {0}.
The first line of the while will then be true, e.g. on AARCH32, we have:
mm_cursor->base_va (=0) + mm_cursor->size (=0) - 1 == end_va (=0xFFFFFFFF)
And the mm_cursor->size = 0 will be lesser than mm->size

A check on mm_cursor->size != 0 should be done as in the previous while,
to avoid such kind of infinite loop.

fixes arm-software/tf-issues#594

Signed-off-by: Yann Gautier <yann.gautier@st.com>

xlat v2: Introduce xlat granule size helpers ...

The function xlat_arch_is_granule_size_supported() can be used to check
if a specific granule size is supported. In Armv8, AArch32 only supports
4 KiB pages. AArch64 supports 4 KiB, 16 KiB or 64 KiB depending on the
implementation, which is detected at runtime.

The function xlat_arch_get_max_supported_granule_size() returns the max
granule size supported by the implementation.

Even though right now they are only used by SPM, they may be useful in
other places in the future. This patch moves the code currently in SPM
to the xlat tables lib so that it can be reused.

Change-Id: If54624a5ecf20b9b9b7f38861b56383a03bbc8a4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>