Merge pull request #1587 from antonio-nino-diaz-arm/an/deprecated ...

Remove deprecated interfaces for all platforms

hikey960: Migrate to new interfaces ...

- Migrate to new GIC interfaces.
- Remove unused bl1_init_bl2_mem_layout().
- Migrate to bl31_early_platform_setup2().
- Use PLAT_VIRT_ADDR_SPACE_SIZE and PLAT_PHY_ADDR_SPACE_SIZE.
- Remove references to removed build options.
- Update Makefile paths.

Change-Id: I583fd893555e6535f32d87ed67bbae430b8e6afe
Tested-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

hikey960: fix build issue for clang ...

plat/hisilicon/hikey960/include/plat_macros.S:19:55: error: unexpected token in
'.asciz' directive
 .asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n" " Offset:\t\t\tvalue\n"
                                                      ^
Makefile:720: recipe for target 'build/hikey960/debug/bl1/cortex_a53.o' failed
make: *** [build/hikey960/debug/bl1/cortex_a53.o] Error 1

Merge the two lines into one.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

hikey960: Add development TBB support ...

This patch adds experimental support for TBB to the HiKey960 board. To
build and test with TBB modify the uefi-tools project platforms.config

+ATF_BUILDFLAGS=TRUSTED_BOARD_BOOT=1 GENERATE_COT=1 SAVE_KEYS=1 \
  MBEDTLS_DIR=./mbedtls

Signed-off-by: Teddy Reed <teddy@casualhacking.io>

Merge pull request #1494 from hzhuang1/pcie_pin ...

Hikey960: configure pins for PCIe controller

Hikey960: configure pins for PCIe controller ...

GPIO_089 connects to PCIE_PERST_N. It needs to be configured as
output low.

Signed-off-by: Kaihua Zhong <zhongkaihua@huawei.com>
Signed-off-by: Xiaowei Song <songxiaowei@hisilicon.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

PSCI: Fix types of definitions ...

Also change header guards to fix defects of MISRA C-2012 Rule 21.1.

Change-Id: Ied0d4b0e557ef6119ab669d106d2ac5d99620c57
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Merge pull request #1313 from jonathanwright-ARM/jw/MISRA-switch-statements ...

Fix switch statements to comply with MISRA rules

Merge pull request #1331 from hzhuang1/reboot_delay ...

hikey960: add delay before reset

hikey960: add delay before reset ...

If system is still accessing storage device, reboot operation
may cause data broken. So add the flush and delay operation
before system reset.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

Clean usage of void pointers to access symbols ...

Void pointers have been used to access linker symbols, by declaring an
extern pointer, then taking the address of it. This limits symbols
values to aligned pointer values. To remove this restriction an
IMPORT_SYM macro has been introduced, which declares it as a char
pointer and casts it to the required type.

Change-Id: I89877fc3b13ed311817bb8ba79d4872b89bfd3b0
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>

plat: fix switch statements to comply with MISRA rules ...

Ensure (where possible) that switch statements in plat comply with MISRA
rules 16.1 - 16.7.

Change-Id: Ie4a7d2fd10f6141c0cfb89317ea28a755391622f
Signed-off-by: Jonathan Wright <jonathan.wright@arm.com>

Merge pull request #1277 from hzhuang1/testing/bl2_el3_v0.6 ...

hikey: migrate to BL2_EL3

hikey960: fix build issue with CLANG ...

plat/hisilicon/hikey960/drivers/pwrc/hisi_pwrc.c:290:20:
error: unused function 'hisi_pdc_set_intmask' [-Werror,-Wunused-function]
static inline void hisi_pdc_set_intmask(void *pdc_base_addr,
                   ^
1 error generated.
Makefile:605: recipe for target 'build/hikey960/release/bl31/hisi_pwrc.o' failed
make: *** [build/hikey960/release/bl31/hisi_pwrc.o] Error 1

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

hikey960: move out duplicated code ...

Create hikey960_bl_common.c to store duplication initialization
code in both BL1 and BL2.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

hikey960: fix invoking driver init in image load driver ...

It's unnecessary to call platform driver initialization in image
load driver. We could make bl2_platform_setup() to executing
just before SCP_BL2 by setting flag IMAGE_ATTRIB_PLAT_SETUP.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

hikey960: migrate to bl2_el3 ...

Since non-TF ROM is used in HiKey960 platform (Hisilicon Hi3660 SoC),
replace BL1 by BL2_EL3 in normal boot mode.

When flush images in recovery mode, keep to use BL1.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

hikey960: drop LOAD_IMAGE v1 ...

Since LOAD_IMAGE_V2 is always enabled in HiKey960 platform. Drop
LOAD_IMAGE v1 to simplify code.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

hikey960: fix memory overlapped in memory map ...

MAP_TSP_MEM could be either in SRAM or DRAM. When MAP_TSP_MEM is in
DRAM, it's overlapped with MAP_DDR.

Since TSP_MEM is always configured in DRAM case, it means
MAP_OPTEE_PAGEABLE is always disabled. Just remove it.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

hikey960: avoid to dump message when fetch boardid ...

The main difference between HiKey960 v1 hardware and HiKey960 v2
hardware is on UART console.

But the function of detecting boardid dumps message before console
ready. So fix it by removing those messages.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

Update ULL() macro and instances of ull to comply with MISRA ...

MISRA C-2012 Rule 7.3 violation: lowercase l shall not be used as literal suffixes.

This patch resolves this for the ULL() macro by using ULL suffix instead
of the ull suffix.

Change-Id: Ia8183c399e74677e676956e8653e82375d0e0a01
Signed-off-by: David Cunado <david.cunado@arm.com>

Merge pull request #1259 from hzhuang1/fix_uart ...

hikey960: avoid hardcode on uart port

hikey960: avoid hardcode on uart port ...

Avoid hardcode on uart port. The uart port could be auto detected
on HiKey960 platform.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

hikey*, poplar: platform.mk: Fix typo in variable assignments ...

Signed-off-by: Victor Chong <victor.chong@linaro.org>

Build: change the first parameter of TOOL_ADD_IMG to lowercase ...

In the next commit, I need the image name in lowercase because
output files are generally named in lowercase.

Unfortunately, TOOL_ADD_IMG takes the first argument in uppercase
since we generally use uppercase Make variables.

make_helpers/build_macros.mk provides 'uppercase' macro to convert
a string into uppercase, but 'lowercase' does not exist.  We can
implement it if we like, but it would be more straightforward to
change the argument of TOOL_ADD_IMG.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Build: rename FIP_ADD_IMG to TOOL_ADD_IMG ...

Now FIP_ADD_IMG takes care of both fiptool and cert_create
symmetrically.  Rename it so that it matches the behavior.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Hikey960: Enable invalid FIQ handling ...

When some interrupts are configured as group 0 in GICv2, these
interrupts trigger FIQ signal; this results in the Linux kernel panic
by reporting log: "Bad mode in FIQ handler detected on CPU0, code
0x00000000 -- Unknown/Uncategorized".  Unfortunately from kernel side it
has no permission to read the GIC register for group 0 interrupts so we
have no chance to get to know which interrupt is configured as secure
interrupt and cause the kernel panic.

For upper reason, this commit enables FIQ exception handling for
SPD_none case.  If the system has not enabled SPD the FIQ interrupt is
trapped into EL3 and the FIQ handler can report the interrupt number so
we can easily narrow down which FIQ introduce unexpected interrupt.
After enable SPD we can rely on SPD interrupt route model to handle FIQ.

Signed-off-by: Leo Yan <leo.yan@linaro.org>

Merge pull request #1211 from Leo-Yan/remove_ca73_cpu_nap_state ...

Hikey960: Remove ca73 cpu nap state

Hikey960: Change CPU standby state for WFI ...

At early time, the CPU CA73 retention state has been supported on
Hikey960.  Later we found the system has the hang issue and for
resolving this issue Hisilicon released new MCU firmware, but
unfortunately the new MCU firmware has side effect and results in the
CA73 CPU cannot really enter retention state and roll back to WFI state.

After discussion we cannot see the possibility to enable CA73 retention
state anymore on Hikey960, based on this conclusion we should remove
this state supporting from ARM-TF and roll back to WFI state only.  We
will commit one patch to remove CA73 CPU retention state in kernel DT
binding as well.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Kevin Wang <jean.wangtao@linaro.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>

Revert "Hikey960: Change to use recommended power state id format" ...

This reverts commit fdae60b.

The commit fdae60b changed the
parameter encoding for the hikey960.  However that implies a DT change
in the kernel side.  After submitting the DT change for upstreaming,
the backward compatibility issue and the interface change raise some
concerns from the Linux community about the issues related to kernel <->
ATF alignment.  There is no way to detect a mis-alignment of those
without a deep knowledge of the ATF and the kernel.  Furthermore, the
failing calls to PSCI in the idle path (because of bad parameters), will
lead to busy looping, implying: thermal issues and extra energy
consumption.

In regard of the Linux community concerns, the potential issues when the
ATF and the kernel are not aligned, it is preferable to revert the
commit.

Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Kevin Wang <jean.wangtao@linaro.org>
Co-authored-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>