| 2020-06-19 |
drivers: marvell: add support for mapping the entire LLC to SRAM
...
Add llc_sram_enable() and llc_sram_disable() APIs to Marvell
cache_lls driver.
Add LLC_SRAM definition to Marvell common makefile - disabled
by the default.
Add description of LLC_SRAM flag to the build documentation.
Change-Id: Ib348e09752ce1206d29268ef96c9018b781db182
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Konstantin Porotchkin
authored
on 31 Mar 2019
Marcin Wojtas
committed
on 19 Jun 2020
|
| 2020-06-17 |
Merge changes I80316689,I23cac4fb,If911e7de,I169ff358,I4e040cd5, ... into integration
...
* changes:
ddr: a80x0: add DDR 32-bit ECC mode support
ble: ap807: improve PLL configuration sequence
ble: ap807: clean-up PLL configuration sequence
ddr: a80x0: add DDR 32-bit mode support
plat: marvell: mci: perform mci link tuning for all mci interfaces
plat: marvell: mci: use more meaningful name for mci link tuning
plat: marvell: a8k: remove wrong or unnecessary comments
plat: marvell: ap807: enable snoop filter for ap807
plat: marvell: ap807: update configuration space of each CP
plat: marvell: ap807: use correct address for MCIx4 register
plat: marvell: add support for PLL 2.2GHz mode
plat: marvell: armada: make a8k_common.mk and mss_common.mk more generic
marvell: armada: add extra level in marvell platform hierarchy
Manish Pandey
authored
on 17 Jun 2020
TrustedFirmware Code Review
committed
on 17 Jun 2020
|
| 2020-06-09 |
GICv3: GIC-600: Detect GIC-600 at runtime
...
The only difference between GIC-500 and GIC-600 relevant to TF-A is the
differing power management sequence.
A certain GIC implementation is detectable at runtime, for instance by
checking the IIDR register. Let's add that test before initiating the
GIC-600 specific sequence, so the code can be used on both GIC-600 and
GIC-500 chips alike, without deciding on a GIC chip at compile time.
This means that the GIC-500 "driver" is now redundant. To allow minimal
platform support, add a switch to disable GIC-600 support.
Change-Id: I17ea97d9fb05874772ebaa13e6678b4ba3415557
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Andre Przywara
authored
on 25 Mar 2020
Madhukar Pappireddy
committed
on 9 Jun 2020
|
| 2020-06-06 |
ddr: a80x0: add DDR 32-bit mode support
...
This commit introduces 32-bit DDR topology map initialization.
For that purpose a new DDR32 build flag is added, with
according documentation update.
Change-Id: I169ff358c2923afd984e27bc126dc551dcaefc01
Signed-off-by: Alex Leibovich <alexl@marvell.com>
Alex Leibovich
authored
on 25 Feb 2019
Marcin Wojtas
committed
on 6 Jun 2020
|
marvell: armada: add extra level in marvell platform hierarchy
...
This commit is a preparation for upcoming support for OcteonTX and
OcteonTX2 product families. Armada platform related files (docs,
plat, include/plat) are moved to the new "armada" sub-folder.
Change-Id: Icf03356187078ad6a2e56c9870992be3ca4c9655
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Grzegorz Jaszczyk
authored
on 5 Nov 2019
Marcin Wojtas
committed
on 6 Jun 2020
|
| 2020-05-27 |
plat/arm: Introduce TC0 platform
...
This patch adds support for Total Compute (TC0) platform. It is an
initial port and additional features are expected to be added later.
TC0 has a SCP which brings the primary Cortex-A out of reset
which starts executing BL1. TF-A optionally authenticates the SCP
ram-fw available in FIP and makes it available for SCP to copy.
Some of the major features included and tested in this platform
port include TBBR, PSCI, MHUv2 and DVFS.
Change-Id: I1675e9d200ca7687c215009eef483d9b3ee764ef
Signed-off-by: Usama Arif <usama.arif@arm.com>
Usama Arif
committed
on 27 May 2020
|
| 2020-05-22 |
plat: imx8mn: Add imx8mn basic support
...
Add imx8mn basic support
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: Ibdfcc87700bfaf980e429f3a5fa08515218ae78d
Jacky Bai
committed
on 22 May 2020
|
| 2020-04-15 |
docs: Fixes and updates for the v2.3 release
...
A small set of misc changes to ensure correctness before the v2.3
release.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I5b4e35b3b46616df0453cecff61f5a414951cd62
laurenw-arm
committed
on 15 Apr 2020
|
Fix Broadcom Stingray platform documentation
...
- Include the platform documentation in the table of contents.
- Add a title for the document. Without this, the platform
documentation was listed under a 'Description' title on page
https://trustedfirmware-a.readthedocs.io/en/latest/plat/index.html
- Change TF-A git repository URL to point to tf.org (rather than the
deprecated read-only mirror on Github).
- Fix the restructuredText syntax for the FIP command line. It was
not displayed at all on the rendered version.
Change-Id: I7a0f062bcf8e0dfc65e8f8bdd6775c497a47e619
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Sandrine Bailleux
committed
on 15 Apr 2020
|
| 2020-04-03 |
Merge changes from topic "brcm_initial_support" into integration
...
* changes:
doc: brcm: Add documentation file for brcm stingray platform
drivers: Add SPI Nor flash support
drivers: Add iproc spi driver
drivers: Add emmc driver for Broadcom platforms
Add BL31 support for Broadcom stingray platform
Add BL2 support for Broadcom stingray platform
Add bl31 support common across Broadcom platforms
Add bl2 setup code common across Broadcom platforms
drivers: Add support to retrieve plat_toc_flags
Manish Pandey
authored
on 3 Apr 2020
TrustedFirmware Code Review
committed
on 3 Apr 2020
|
doc: brcm: Add documentation file for brcm stingray platform
...
Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>
Change-Id: I5e2c1220e9694d6ba771cc90daa0e70e967eebe6
Sheetal Tigadoli
committed
on 3 Apr 2020
|
| 2020-03-31 |
doc: Fix broken external link for Odroid C2
...
The file README.odroid-c2 has been moved in the U-Boot repository.
Reference the official uplink repository.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Change-Id: Ie72c7aefd6363a406f88ad2c87faee1c7a2125a3
Heinrich Schuchardt
committed
on 31 Mar 2020
|
| 2020-03-13 |
docs: remove uefi-tools in hikey and hikey960
...
Since uefi-tools isn't used any more in hikey and hikey960, update the
documents.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Change-Id: I0843d27610e241d442e58b6cd71967998730a35d
Haojian Zhuang
committed
on 13 Mar 2020
|
| 2020-03-09 |
docs: qemu: Add instructions to boot using FIP image
...
Update qemu documentation with instructions to boot using FIP image.
Also, add option to build TF-A with TBBR and firmware encryption
enabled.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: Ib3af485d413cd595352034c82c2268d7f4cb120a
Sumit Garg
committed
on 9 Mar 2020
|
| 2020-02-27 |
Add Cortex-A65/AE to the supported FVP list
...
Cortex-A65x4 and Cortex-A65AEx8 is now included in the list of the
supported Arm Fixed Virtual Platforms.
Signed-off-by: Imre Kis <imre.kis@arm.com>
Change-Id: Ibfcaec11bc75549d60455e96858d79b679e71e5e
Imre Kis
committed
on 27 Feb 2020
|
| 2020-02-26 |
amlogic/axg: Add documentation page to the index
...
It is needed to make it appear in the table of contents. Right now,
all Amlogic documentation pages appear under the "Platform ports"
section, except the AXG one.
Change-Id: Ibcfc3b156888d2a9574953578978b629e185c708
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Sandrine Bailleux
committed
on 26 Feb 2020
|
| 2020-02-18 |
FVP: Fix BL31 load address and image size for RESET_TO_BL31=1
...
When TF-A is built with RESET_TO_BL31=1 option, BL31 is the
first image to be run and should have all the memory allocated
to it except for the memory reserved for Shared RAM at the start
of Trusted SRAM.
This patch fixes FVP BL31 load address and its image size for
RESET_TO_BL31=1 option. BL31 startup address should be set to
0x400_1000 and its maximum image size to the size of Trusted SRAM
minus the first 4KB of shared memory.
Loading BL31 at 0x0402_0000 as it is currently stated in
'\docs\plat\arm\fvp\index.rst' causes EL3 exception when the
image size gets increased (i.e. building with LOG_LEVEL=50)
but doesn't exceed 0x3B000 not causing build error.
Change-Id: Ie450baaf247f1577112f8d143b24e76c39d33e91
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Alexei Fedorov
committed
on 18 Feb 2020
|
| 2020-02-10 |
Merge changes from topic "amlogic/axg" into integration
...
* changes:
amlogic: axg: Add a build flag when using ATOS as BL32
amlogic: axg: Add support for the A113D (AXG) platform
Manish Pandey
authored
on 10 Feb 2020
TrustedFirmware Code Review
committed
on 10 Feb 2020
|
| 2020-02-07 |
plat/arm/sgi: introduce number of chips macro
...
Introduce macro 'CSS_SGI_CHIP_COUNT' to allow Arm CSS platforms with
multi-chip support to define number of chiplets on the platform. By
default, this flag is set to 1 and does not affect the existing single
chip platforms.
For multi-chip platforms, override the default value of
CSS_SGI_CHIP_COUNT with the number of chiplets supported on the
platform. As an example, the command below sets the number of chiplets
to two on the RD-N1-Edge multi-chip platform:
export CROSS_COMPILE=<path-to-cross-compiler>
make PLAT=rdn1edge CSS_SGI_CHIP_COUNT=2 ARCH=aarch64 all
Change-Id: If364dc36bd34b30cc356f74b3e97633933e6c8ee
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Vijayenthiran Subramaniam
committed
on 7 Feb 2020
|
| 2020-02-06 |
Adds option to read ROTPK from registers for FVP
...
Enables usage of ARM_ROTPK_LOCATION=regs for FVP board.
Removes hard-coded developer keys. Instead, setting
ARM_ROTPK_LOCATION=devel_* takes keys from default directory.
In case of ROT_KEY specified - generates a new hash and replaces the
original.
Note: Juno board was tested by original feature author and was not tested
for this patch since we don't have access to the private key. Juno
implementation was moved to board-specific file without changing
functionality. It is not known whether byte-swapping is still needed
for this platform.
Change-Id: I0fdbaca0415cdcd78f3a388551c2e478c01ed986
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Max Shvetsov
committed
on 6 Feb 2020
|
amlogic: axg: Add a build flag when using ATOS as BL32
...
BL2 is unconditionally setting 0 (OPTEE_AARCH64) in arg0 even when the
BL32 image is 32bit (OPTEE_AARCH32). This is causing the boot to hang
when ATOS (32bit Amlogic BL32 binary-only TEE OS) is used.
Since we are not aware of any Amlogic platform shipping a 64bit version
of ATOS we can hardcode OPTEE_AARCH32 / MODE_RW_32 when using ATOS.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Iaea47cf6dc48bf8a646056761f02fb81b41c78a3
Carlo Caione
committed
on 6 Feb 2020
|
amlogic: axg: Add support for the A113D (AXG) platform
...
Introduce the preliminary support for the Amlogic A113D (AXG) SoC.
This port is a minimal implementation of BL31 capable of booting
mainline U-Boot, Linux and chainloading BL32 (ATOS).
Tested on a A113D board.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ic4548fa2f7c48d61b485b2a6517ec36c53c20809
Carlo Caione
committed
on 6 Feb 2020
|
| 2020-02-03 |
doc: qemu: fix and update documentation
...
The current URL for QEMU_EFI.fd is not found. Update the link to
point to the new one.
If you run the shell command as instructed, you will see this error:
qemu-system-aarch64: keep_bootcon: Could not open 'keep_bootcon': No such file or directory
The part "console=ttyAMA0,38400 keep_bootcon root=/dev/vda2" is the
kernel parameter, so it must be quoted.
As of writing, QEMU v4.2.0 is the latest, but it does not work for
TF-A (It has been fixed in the mainline.) QEMU v4.1.0 works fine.
With those issues addressed, I succeeded in booting the latest kernel.
Tested with QEMU v4.1.0 and Linux 5.5 (defconfig with no modification).
Update the tested versions.
Change-Id: Ic85db0e688d67b1803ff890047d37de3f3db2daa
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 3 Feb 2020
|
| 2020-01-29 |
Merge changes I0fb7cf79,Ia8eb4710 into integration
...
* changes:
qemu: Implement qemu_system_off via semihosting.
qemu: Support ARM_LINUX_KERNEL_AS_BL33 to pass FDT address.
Soby Mathew
authored
on 29 Jan 2020
TrustedFirmware Code Review
committed
on 29 Jan 2020
|
| 2020-01-23 |
qemu: Support ARM_LINUX_KERNEL_AS_BL33 to pass FDT address.
...
This lets the Linux kernel or any other image which expects an FDT in x0 be
loaded directly as BL33 without a separate bootloader on QEMU.
Signed-off-by: Andrew Walbran <qwandor@google.com>
Change-Id: Ia8eb4710a3d97cdd877af3b8aae36a2de7cfc654
Andrew Walbran
committed
on 23 Jan 2020
|
xilinx: versal: PLM to ATF handover
...
Parse the parameter structure the PLM populates, to populate the
bl32 and bl33 image structures.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I317072d1086f6cc6f90883c1b8b6d086ff57b443
Venkatesh Yadav Abbarapu
committed
on 23 Jan 2020
|
| 2020-01-22 |
Merge changes from topic "add-versal-soc-support" into integration
...
* changes:
plat: xilinx: Move pm_client.h to common directory
plat: xilinx: versal: Make silicon default build target
xilinx: versal: Wire silicon default setup
versal: Increase OCM memory size for DEBUG builds
plat: xilinx: versal: Dont set IOU switch clock
arm64: versal: Adjust cpu clock for versal virtual
xilinx: versal: Add support for PM_GET_OPERATING_CHARACTERISTIC EEMI call
plat: versal: Add Get_ChipID API
plat: xilinx: versal: Add load Pdi API support
xilinx: versal: Add feature check API
xilinx: versal: Implement set wakeup source for client
plat: xilinx: versal: Add GET_CALLBACK_DATA function
xilinx: versal: Add PSCI APIs for system shutdown & reset
xilinx: versal: Add PSCI APIs for suspend/resume
xilinx: versal: Remove no_pmc ops to ON power domain
xilinx: versal: Add set wakeup source API
xilinx: versal: Add client wakeup API
xilinx: versal: Add query data API
xilinx: versal: Add request wakeup API
xilinx: versal: Add PM_INIT_FINALIZE API for versal
xilinx: versal: Add support of PM_GET_TRUSTZONE_VERSION API
xilinx: versal: enable ipi mailbox service
xilinx: move ipi mailbox svc to xilinx common
plat: xilinx: versal: Implement PM IOCTL API
xilinx: versal: Implement power down/restart related EEMI API
xilinx: versal: Add SMC handler for EEMI API
xilinx: versal: Implement PLL related PM APIs
xilinx: versal: Implement clock related PM APIs
xilinx: versal: Implement pin control related PM APIs
xilinx: versal: Implement reset related PM APIs
xilinx: versal: Implement device related PM APIs
xilinx: versal: Add support for suspend related APIs
xilinx: versal: Add get_api_version support
xilinx: Add support to send PM API to PMC using IPI for versal
plat: xilinx: versal: Move versal_def.h to include directory
plat: xilinx: versal: Move versal_private.h to include directory
plat: xilinx: zynqmp: Use GIC framework for warm restart
Soby Mathew
authored
on 22 Jan 2020
TrustedFirmware Code Review
committed
on 22 Jan 2020
|
| 2020-01-20 |
doc: stm32mp1: Update build command line
...
Add new flags for storage support that must be used in the build
command line. Add the complete build steps for an OP-TEE configuration.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I0c682f6eb0aab83aa929f4ba734d3151c264aeed
Lionel Debieve
committed
on 20 Jan 2020
|
| 2020-01-15 |
plat: xilinx: versal: Make silicon default build target
...
This patch makes default build target as silicon instead of QEMU.
The default can be overwritten by specifying it through build flag
VERSAL_PLATFORM.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ia4cb1df1f206db3e514e8ce969acca875e973ace
Siva Durga Prasad Paladugu
authored
on 10 Jul 2019
Jolly Shah
committed
on 15 Jan 2020
|
| 2020-01-14 |
rpi4: Fix documentation of armstub config entry
...
It's in fact mandatory. Seen with RPi firmware 1.20190925.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Change-Id: I80739b74f25817294adc52cfd26a3ec59c06f892
Jan Kiszka
authored
on 9 Dec 2019
Olivier Deprez
committed
on 14 Jan 2020
|
