Analyze coding style of patches individually ...

With the old system `checkpatch.pl` gets one sole input that consists of
the commit message and commit diff of each commit between BASE_COMMIT
and HEAD. It also filters out changes in some files, which makes `git
format-patch` completely ignore that commit, even the commit message.

With the new system the commit message and commit diff are analyzed
separately. This means that, even if all the files modified by a commit
are filtered out, the commit message will still be analyzed.

Also, all commits are analyzed individually. This way it's easier to
know which commit caused the problem, and there are no warnings about
repeated "Signed-off-by" lines.

Change-Id: Ic676a0b76801bb2607141a8d73dc3a942dc01c0e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Merge pull request #1193 from jwerner-chromium/JW_coreboot ...

New console API and coreboot support [v4]

bl2-el3: Don't include BL2 in fip for BL2 at EL3 ...

It is better to not include BL2 in FIP when using `BL2 at EL3` as
platforms using this config would not have the capability to parse the
FIP format in Boot ROM and BL2 needs to be loaded independently. This
patch does the required changes for the same.

Change-Id: Iad285c247b3440e2d827fef97c3dd81f5c09cabc
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

bl2-el3: Add BL2_EL3 image ...

This patch enables BL2 to execute at the highest exception level
without any dependancy on TF BL1. This enables platforms which already
have a non-TF Boot ROM to directly load and execute BL2 and subsequent BL
stages without need for BL1.  This is not currently possible because
BL2 executes at S-EL1 and cannot jump straight to EL3.

Change-Id: Ief1efca4598560b1b8c8e61fbe26d1f44e929d69
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

Disable PIE compilation option ...

ARM TF does not work correctly if built with a version of gcc
that is configured to use PIE by default (e.g. Debian Stretch).

This patch identifies when such a version of gcc is being used
(by searching for --enable-default-pie) and adds -fno-PIE option
to TF_CFLAGS.

fixes arm-software/tf-issues#519

Change-Id: I2322122c49841746d35d152694e14f6f73beb0fd
Signed-off-by: David Cunado <david.cunado@arm.com>
Co-Authored-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Steve Capper <steve.capper@arm.com>
Tested-by: Alexei Fedorov <alexei.fedorov@arm.com>

Merge pull request #1104 from nmenon/dtb_build-v2 ...

Makefile: Add ability to build dtb (v2)

Add new function-pointer-based console API ...

This patch overhauls the console API to allow for multiple console
instances of different drivers that are active at the same time. Instead
of binding to well-known function names (like console_core_init),
consoles now provide a register function (e.g. console_16550_register())
that will hook them into the list of active consoles. All console
operations will be dispatched to all consoles currently in the list.

The new API will be selected by the build-time option MULTI_CONSOLE_API,
which defaults to ${ERROR_DEPRECATED} for now. The old console API code
will be retained to stay backwards-compatible to older platforms, but
should no longer be used for any newly added platforms and can hopefully
be removed at some point in the future.

The new console API is intended to be used for both normal (bootup) and
crash use cases, freeing platforms of the need to set up the crash
console separately. Consoles can be individually configured to be active
active at boot (until first handoff to EL2), at runtime (after first
handoff to EL2), and/or after a crash. Console drivers should set a sane
default upon registration that can be overridden with the
console_set_scope() call. Code to hook up the crash reporting mechanism
to this framework will be added with a later patch.

This patch only affects AArch64, but the new API could easily be ported
to AArch32 as well if desired.

Change-Id: I35c5aa2cb3f719cfddd15565eb13c7cde4162549
Signed-off-by: Julius Werner <jwerner@chromium.org>

Merge pull request #1178 from davidcunado-arm/dc/enable_sve ...

Enable SVE for Non-secure world

Enable SVE for Non-secure world ...

This patch adds a new build option, ENABLE_SVE_FOR_NS, which when set
to one EL3 will check to see if the Scalable Vector Extension (SVE) is
implemented when entering and exiting the Non-secure world.

If SVE is implemented, EL3 will do the following:

- Entry to Non-secure world: SIMD, FP and SVE functionality is enabled.

- Exit from Non-secure world: SIMD, FP and SVE functionality is
  disabled. As SIMD and FP registers are part of the SVE Z-registers
  then any use of SIMD / FP functionality would corrupt the SVE
  registers.

The build option default is 1. The SVE functionality is only supported
on AArch64 and so the build option is set to zero when the target
archiecture is AArch32.

This build option is not compatible with the CTX_INCLUDE_FPREGS - an
assert will be raised on platforms where SVE is implemented and both
ENABLE_SVE_FOR_NS and CTX_INCLUDE_FPREGS are set to 1.

Also note this change prevents secure world use of FP&SIMD registers on
SVE-enabled platforms. Existing Secure-EL1 Payloads will not work on
such platforms unless ENABLE_SVE_FOR_NS is set to 0.

Additionally, on the first entry into the Non-secure world the SVE
functionality is enabled and the SVE Z-register length is set to the
maximum size allowed by the architecture. This includes the use case
where EL2 is implemented but not used.

Change-Id: Ie2d733ddaba0b9bef1d7c9765503155188fe7dae
Signed-off-by: David Cunado <david.cunado@arm.com>

ARM platforms: Fixup AArch32 builds ...

This patch fixes a couple of issues for AArch32 builds on ARM reference
platforms :

1. The arm_def.h previously defined the same BL32_BASE value for AArch64 and
   AArch32 build. Since BL31 is not present in AArch32 mode, this meant that
   the BL31 memory is empty when built for AArch32. Hence this patch allocates
   BL32 to the memory region occupied by BL31 for AArch32 builds.

   As a side-effect of this change, the ARM_TSP_RAM_LOCATION macro cannot
   be used to control the load address of BL32 in AArch32 mode which was
   never the intention of the macro anyway.

2. A static assert is added to sp_min linker script to check that the progbits
   are within the bounds expected when overlaid with other images.

3. Fix specifying `SPD` when building Juno for AArch32 mode. Due to the quirks
   involved when building Juno for AArch32 mode, the build option SPD needed to
   specifed. This patch corrects this and also updates the documentation in the
   user-guide.

4. Exclude BL31 from the build and FIP when building Juno for AArch32 mode. As
   a result the previous assumption that BL31 must be always present is removed
   and the certificates for BL31 is only generated if `NEED_BL31` is defined.

Change-Id: I1c39bbc0abd2be8fbe9f2dea2e9cb4e3e3e436a8
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Implement support for the Activity Monitor Unit on Cortex A75 ...

The Cortex A75 has 5 AMU counters.  The first three counters are fixed
and the remaining two are programmable.

A new build option is introduced, `ENABLE_AMU`.  When set, the fixed
counters will be enabled for use by lower ELs.  The programmable
counters are currently disabled.

Change-Id: I4bd5208799bb9ed7d2596e8b0bfc87abbbe18740
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Fix Makefile for ARMv8-A AArch32 build ...

Commit 26e63c4450 broke the Makefile for ARMv8-A AArch32 platforms.
This patch fixes it.

Change-Id: I49b8eb5b88f3a131aa4c8642ef970e92d90b6dd2
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Merge pull request #1145 from etienne-lms/rfc-armv7-2 ...

Support ARMv7 architectures

Refactor Statistical Profiling Extensions implementation ...

Factor out SPE operations in a separate file.  Use the publish
subscribe framework to drain the SPE buffers before entering secure
world.  Additionally, enable SPE before entering normal world.

A side effect of this change is that the profiling buffers are now
only drained when a transition from normal world to secure world
happens.  Previously they were drained also on return from secure
world, which is unnecessary as SPE is not supported in S-EL1.

Change-Id: I17582c689b4b525770dbb6db098b3a0b5777b70a
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Merge pull request #1148 from antonio-nino-diaz-arm/an/spm ...

Introduce Secure Partition Manager

SPM: Introduce Secure Partition Manager ...

A Secure Partition is a software execution environment instantiated in
S-EL0 that can be used to implement simple management and security
services. Since S-EL0 is an unprivileged exception level, a Secure
Partition relies on privileged firmware e.g. ARM Trusted Firmware to be
granted access to system and processor resources. Essentially, it is a
software sandbox that runs under the control of privileged software in
the Secure World and accesses the following system resources:

- Memory and device regions in the system address map.
- PE system registers.
- A range of asynchronous exceptions e.g. interrupts.
- A range of synchronous exceptions e.g. SMC function identifiers.

A Secure Partition enables privileged firmware to implement only the
absolutely essential secure services in EL3 and instantiate the rest in
a partition. Since the partition executes in S-EL0, its implementation
cannot be overly complex.

The component in ARM Trusted Firmware responsible for managing a Secure
Partition is called the Secure Partition Manager (SPM). The SPM is
responsible for the following:

- Validating and allocating resources requested by a Secure Partition.
- Implementing a well defined interface that is used for initialising a
  Secure Partition.
- Implementing a well defined interface that is used by the normal world
  and other secure services for accessing the services exported by a
  Secure Partition.
- Implementing a well defined interface that is used by a Secure
  Partition to fulfil service requests.
- Instantiating the software execution environment required by a Secure
  Partition to fulfil a service request.

Change-Id: I6f7862d6bba8732db5b73f54e789d717a35e802f
Co-authored-by: Douglas Raillard <douglas.raillard@arm.com>
Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Co-authored-by: Achin Gupta <achin.gupta@arm.com>
Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

ARMv7 target is driven by ARM_ARCH_MAJOR==7 ...

External build environment shall sets directive ARM_ARCH_MAJOR to 7
to specify a target ARMv7-A core.

As ARM-TF expects AARCH to be set, ARM_ARCH_MAJOR==7 mandates
AARCH=aarch32.

The toolchain target architecture/cpu is delegated after the platform
configuration is parsed. Platform shall define target core through
ARM_CORTEX_A<x>=yes, <x> being 5, 7, 9, 12, 15 and/or 17.

Platform can bypass ARM_CORTEX_A<x>=yes directive and provide straight
the toolchain target directive through MARCH32_DIRECTIVE.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>

Build: introduce ${BUILD_PLAT} target to create the top build directory ...

Some platforms (for ex. UniPhier) want to create files in the very
top of the build directory.  Add ${BUILD_PLAT} so such files can
depend on it.

Make existing directory targets depend on ${BUILD_PLAT} because
they are sub-directories of ${BUILD_PLAT}.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

GIC: Add APIs to set interrupt type and query support ...

The back end GIC driver converts and assigns the interrupt type to
suitable group.

For GICv2, a build option GICV2_G0_FOR_EL3 is introduced, which
determines to which type Group 0 interrupts maps to.

 - When the build option is set 0 (the default), Group 0 interrupts are
   meant for Secure EL1. This is presently the case.

 - Otherwise, Group 0 interrupts are meant for EL3. This means the SPD
   will have to synchronously hand over the interrupt to Secure EL1.

The query API allows the platform to query whether the platform supports
interrupts of a given type.

API documentation updated.

Change-Id: I60fdb4053ffe0bd006b3b20914914ebd311fc858
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Makefile: Add ability to build dtb ...

This is a revamp of the original approach in:
https://github.com/ARM-software/arm-trusted-firmware/pull/747

Current build system has no means to automatically generate dtbs from
dts, instead, stores the dtbs in the fdts/ folder. While this makes
perfect sense for many reference platforms, this becomes a minor
breakage in development flow for newer platforms.

However, this can be solved by providing a rule for the dtbs while
building the ATF binaries by purely describing which dts sources we
need.

For example, with this change, we will now be able to describe the
dtbs we need for the platform in the corresponding platform.mk file:
FDT_SOURCES += fdts/abc.dts

This should be able to generate the abc.dtb appropriately.

Since device trees are specification of hardware, we don't tie the rule
to any specific BL, instead a generic rule is introduced.

Further, this approach allows us to generate appropriate dtbs which may be
need to be regenerated when a common dtsi gets updated, by just
restricting changes to the dtsi alone, instead of synchronizing all the
dtbs as well.

If dtc is not available in default paths, but is available in an
alternate location, it can be chosen by overriding the DTC variable
such as 'make DTC=~/dtc/dtc ....`

NOTE: dtbs are built only with the explicit make dtbs command. The rule
is only available if the platform defines a FDT_SOURCES variable.

Signed-off-by: Benjamin Fair <b-fair@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>

Merge pull request #1093 from soby-mathew/eb/log_fw ...

Implement log framework

Implement log framework ...

This patch gives users control over logging messages printed from the C
code using the LOG macros defined in debug.h Users now have the ability
to reduce the log_level at run time using the tf_log_set_max_level()
function. The default prefix string can be defined by platform by
overriding the `plat_log_get_prefix()` platform API which is also
introduced in this patch.

The new log framework results in saving of some RO data. For example,
when BL1 is built for FVP with LOG_LEVEL=LOG_LEVEL_VERBOSE, resulted
in saving 384 bytes of RO data and increase of 8 bytes of RW data. The
framework also adds about 108 bytes of code to the release build of FVP.

Fixes ARM-software/tf-issues#462

Change-Id: I476013d9c3deedfdd4c8b0b0f125665ba6250554
Co-authored-by: Eleanor Bonnici <Eleanor.bonnici@arm.com>
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Filter out invalid configure for EL3_PAYLOAD_BASE ...

TRUSTED_BOARD_BOOT and GENERATE_COT is not
compatible with EL3_PAYLOAD_BASE

Change-Id: I538c77e1f6c7da400d30ae4d633b8fcc55742202
Signed-off-by: Qixiang Xu <qixiang.xu@arm.com>

Makefile: correct path for CHECKPATCH warnings ...

Change-Id: I08c9789d3fd2b034b08de663d151023ca005f77f
Reported-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>

CCI: Adapt for specific product at run time ...

The current build system and driver requires the CCI product to be
specified at build time. The device constraints can be determined at run
time from its ID registers, obviating the need for specifying them
ahead.

This patch adds changes to identify and validate CCI at run time. Some
global variables are renamed to be in line with the rest of the code
base.

The build option ARM_CCI_PRODUCT_ID is now removed, and user guide is
updated.

Change-Id: Ibb765e349d3bc95ff3eb9a64bde1207ab710a93d
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Fix alphabetic ordering ...

Commit d832aee90, which added SPE support, got the alphabetical ordering
wrong for documentation and Makefile addition. This patch fixes that.

Change-Id: I061ecfba4db363902c9d7d577d2ce6c612cb9e1d
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Release v1.4: Update minor version number to 4 ...

Change-Id: I8676a22649dce92d0ddd98013fc6dafcfbe94c90
Signed-off-by: David Cunado <david.cunado@arm.com>

Introduce TF_LDFLAGS ...

Use TF_LDFLAGS from the Makefiles, and still append LDFLAGS as well to
the compiler's invocation. This allows passing extra options from the
make command line using LDFLAGS.

Document new LDFLAGS Makefile option.

Change-Id: I88c5ac26ca12ac2b2d60a6f150ae027639991f27
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

Merge pull request #1002 from douglas-raillard-arm/dr/fix_errata_a53 ...

Apply workarounds for A53 Cat A Errata 835769 and 843419

Apply workarounds for A53 Cat A Errata 835769 and 843419 ...

These errata are only applicable to AArch64 state. See the errata notice
for more details:
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.epm048406/index.html

Introduce the build options ERRATA_A53_835769 and ERRATA_A53_843419.
Enable both of them for Juno.

Apply the 835769 workaround as following:
* Compile with -mfix-cortex-a53-835769
* Link with --fix-cortex-a53-835769

Apply the 843419 workaround as following:
* Link with --fix-cortex-a53-843419

The erratum 843419 workaround can lead the linker to create new sections
suffixed with "*.stub*" and 4KB aligned. The erratum 835769 can lead the
linker to create new "*.stub" sections with no particular alignment.

Also add support for LDFLAGS_aarch32 and LDFLAGS_aarch64 in Makefile for
architecture-specific linker options.

Change-Id: Iab3337e338b7a0a16b0d102404d9db98c154f8f8
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>