rpi4/fdt: Move dtb_size() function to fdt_wrappers.h ...

Getting the actual size of a DTB blob is useful beyond the Raspberry Pi
port, so let's move this helper to a common header.

Change-Id: Ia5be46e9353ca859a1e5ad9e3c057a322dfe22e2
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Merge changes from topic "imx8mp_basic_support" into integration ...

* changes:
  plat: imx8mp: Add the basic support for i.MX8MP
  plat: imx8m: Move the gpc hw reg to a separate header file

Merge "uniphier: increase BL33 max size and GZIP temporary buffer size" into integration

Merge "stm32mp1: register shared resource per GPIO bank/pin" into integration

Merge "stm32mp1: register shared resource per IOMEM address" into integration

Merge "stm32mp1: allow non-secure access to reset upon periph registration" into integration

Merge "stm32mp1: allow non-secure access to clocks upon periph registration" into integration

Merge "stm32mp1: shared resources: peripheral registering" into integration

Merge "stm32mp1: shared resources: add trace messages" into integration

Merge changes from topic "fpga_cmdline" into integration ...

* changes:
  arm_fpga: Predefine DTB and BL33 load addresses
  arm_fpga: Add Klein and Matterhorn support
  arm_fpga: Support more CPU clusters

Merge "SPMD: fix boundary check if manifest is page aligned" into integration

SPMD: fix boundary check if manifest is page aligned ...

while mapping SPMC manifest page in the SPMD translation regime the
mapped size was resolved to zero if SPMC manifest base address is PAGE
aligned, causing SPMD to abort.

To fix the problem change mapped size to PAGE_SIZE if manifest base is
PAGE aligned.

Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I06cd39dbefaf492682d9bbb0c82b950dd31fb416

Merge "plat/arm: Fix build failure due to increase in BL2 size" into integration

plat/arm: Fix build failure due to increase in BL2 size ...

BL2 size gets increased due to the libfdt library update and 
that eventually cause no-optimization build failure for BL2 as below:
aarch64-none-elf-ld.bfd: BL2 image has exceeded its limit.
aarch64-none-elf-ld.bfd: region `RAM' overflowed by 4096 bytes
Makefile:1070: recipe for target 'build/fvp/debug/bl2/bl2.elf' failed
make: *** [build/fvp/debug/bl2/bl2.elf] Error 1

Fixed build failure by increasing BL2 image size limit by 4Kb.

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I92a57eb4db601561a98e254b64994bb921a88db3

plat: marvell: armada: mcbin: squash several IO windows into one ...

There is no need to open tree different IO window when there is
possibility of having one covering required range.

Change-Id: I9feae1fc583df1f7d97d28161cf7601f43513856
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

plat: marvell: armada: fix BL32 extra parameters usage ...

Update missing code releated to the BL32 payload.

Change-Id: I5cbe71921467c53c45be5510f950cefdacc110e1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

plat: marvell: armada: a8k: change CCU LLC SRAM mapping ...

The LLC SRAM will be enabled in OP-TEE OS for usage as secure storage.
The CCU have to prepare SRAM window, but point to the DRAM-0 target
until the SRAM is actually enabled.
This patch changes CCU SRAM window target to DRAM-0
Remove dependence between LLC_SRAM and LLC_ENABLE and update the
build documentation.
The SRAМ base moved to follow the OP-TEE SHMEM area (0x05400000)

Change-Id: I85c2434a3d515ec37da5ae8eb729e3280f91c456
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

plat: marvell: armada: adjust trusted DRAM size to match OP-TEE OS ...

Area used as trusted DRAM is 12MB in Marvell OP-TEE OS module.
It is followed by 4MB of shared memory.

Change-Id: If8edeeec5861b529408baca25f78c06a0a440d8c
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

plat: marvell: armada: move mg conf related code to appropriate driver ...

Now when mg_conf_cm3 driver is present - move all relevant code there.

Change-Id: I444d9e877c450d6ee69ca3a49b547e4c3aeac0be
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

drivers: marvell: mg_conf_cm3: add basic driver ...

Implement function which will allow to start AP FW.

Change-Id: Ie0fc8ad138bf56b10809cdc92d1e5e96a2aaf33f
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

plat: imx8mp: Add the basic support for i.MX8MP ...

The i.MX 8MP Media Applications Processor is part of the growing
i.MX8M family targeting the consumer and industrial market. It brings
an effective Machine Learning and AI accelerator that enables a new
class of applications. It is built in 14LPP to achieve both high
performance and low power consumption and relies on a powerful fully
coherent core complex based on a quad core Arm Cortex-A53 cluster and
Cortex-M7 low-power coprocessor, audio digital signal processor, machine
learning and graphics accelerators.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I98311ebc32bee20af05031492e9fc24d06e55f4a

plat/arm, dts: Update platform device tree for CoT ...

Included cot_descriptors.dtsi in platform device tree
(fvp_tb_fw_config.dts).

Also, updated the maximum size of tb_fw_config to 0x1800
in order to accomodate the device tree for CoT descriptors.

Follow up patch will parse the device tree for these CoT descriptors
and fill the CoT descriptor structures at runtime instead of using
static CoT descriptor structures in the code base.

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I90122bc713f6842b82fb019b04caf42629b4f45a

plat: imx8m: Move the gpc hw reg to a separate header file ...

Although the GPC provides the similar functions for all the
i.MX8M SoC family, the HW register offset and bit defines
still have some slight difference, so move the hw reg
offset & most of the bitfield defines in 'gpc_reg.h' that
is specific to each SoC.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I291c435fe98c2f6e6ff8fe0c715ff3a83daa6a0f

arm_fpga: Predefine DTB and BL33 load addresses ...

The memory layout for the FPGA is fairly uniform for most of the FPGA
images, and we already assume that DRAM starts at 2GB by default.

Prepopulate PRELOADED_BL33_BASE and FPGA_PRELOADED_DTB_BASE to some
sane default values, to simplify building some stock image.
If people want to deviate from that, they can always override those
addresses on the make command line.

Change-Id: I2238fafb3f8253a01ad2d88d45827c141d9b29dd
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

arm_fpga: Add Klein and Matterhorn support ...

To support FPGAs with those cores as well, as the respective cpulib
files to the Makefile.

Change-Id: I1a60867d5937be88b32b210c7817be4274554a76
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

arm_fpga: Support more CPU clusters ...

The maximum number of clusters is currently set to 2, which is quite
limiting. As there are FPGA images with 4 clusters, let's increase the
limit to 4.

Change-Id: I9a85ca07ebbd2a018ad9668536d867ad6b75e537
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

stm32mp1: register shared resource per GPIO bank/pin ...

Introduce helper functions stm32mp_register_secure_gpio() and
stm32mp_register_non_secure_gpio() for drivers to register a
GPIO pin as secure or non-secure.

These functions are stubbed when shared resource driver is not
embedded in the BL image so that drivers do not bother whether they
shall register or not their resources.

Change-Id: I1fe98576c072ae31f75427c9ac5c9f6c4f1b6ed1
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

stm32mp1: register shared resource per IOMEM address ...

Introduce helper functions stm32mp_register_secure_periph_iomem()
and stm32mp_register_non_secure_periph_iomem() for drivers to
register a resource as secure or non-secure based on its SoC
interface registers base address.

These functions are stubbed when shared resources driver is not
embedded (!STM32MP_SHARED_RESOURCES) so that drivers embedded
in other BL stages do not bother whether they shall register or
not their resources.

Change-Id: Icebd05a930afc5964bc4677357da5d1b23666066
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

stm32mp1: allow non-secure access to reset upon periph registration ...

Update implementation of stm32mp_nsec_can_access_reset() based
on the registering of the shared resources.

Querying registering state locks further registration of
peripherals.

Change-Id: I5f38f2a3481780b9a71939d95984c4821c537aa4
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

stm32mp1: allow non-secure access to clocks upon periph registration ...

Update implementation of stm32mp_nsec_can_access_clock() based
on the registering of the shared resources.

Querying registering state locks further registration of peripherals.

Change-Id: If68f6d4a52c4742ba66244c6ea2d9afa08404137
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>