Remove MULTI_CONSOLE_API flag and references to it ...

The new API becomes the default one.

Change-Id: Ic1d602da3dff4f4ebbcc158b885295c902a24fec
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

rpi3: Enable SDHost driver in BL2 ...

This patch inits SDHost in BL2 earlysetup. BL2 can start operating mmc
commands to read/write MMC raw blocks.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>

rpi3: Enable GPIO in BL2 ...

This patch inits the GPIO in BL2 earlysetup. So BL2 can start operating
GPIO pins.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>

rpi3: fix RPI3_PRELOADED_DTB_BASE usage ...

In case if `RPI3_PRELOADED_DTB_BASE` isn't defined explicitly with
proper pre-loaded DTB address, `add_define` macro defined in
`make_helpers/build_macros.mk` still supplies this definition to the
compiler like `-DRPI3_PRELOADED_DTB_BASE`, and it's obviously is set to
default value 1.

This simply leads to the wrong `MAP_NS_DTB` region definition (base_va
is set `0x1` instead of `0x00010000`) in `plat/rpi3/rpi3_common.c`:

Which causes aligment check to fail in `mmap_add_region_check()`:
VERBOSE: base_pa: 0x00000001, base_va: 0x00000001, size: 0x00010000
...
ERROR:   mmap_add_region_check() failed. error -22

Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>

rpi3: Remove unneeded include paths from Makefile ...

Change-Id: I20d164f7573ebc24935e92a924472e29c8a0e3a0
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

drivers/console: Link console framework code by default ...

This patch makes the build system link the console framework code by
default, like it already does with other common libraries (e.g. cache
helpers). This should not make a difference in practice since TF is
linked with --gc-sections, so the linker will garbage collect all
functions and data that are not referenced by any other code. Thus, if a
platform doesn't want to include console code for size reasons and
doesn't make any references to console functions, the code will not be
included in the final binary.

To avoid compatibility issues with older platform ports, only make this
change for the MULTI_CONSOLE_API.

Change-Id: I153a9dbe680d57aadb860d1c829759ba701130d3
Signed-off-by: Julius Werner <jwerner@chromium.org>

rpi3: add RPI3_USE_UEFI_MAP build option ...

The default Raspberry Pi 3 memory mapping for ATF is geared towards
the use of uboot + Linux. This creates issues when trying to use
ATF with an UEFI payload and Windows on ARM64.

We therefore introduce new build option RPI3_USE_UEFI_MAP, that
enables the build process to use an alternate memory mapping that
is compatible with UEFI + Windows (as well as UEFI + Linux).

Fixes ARM-software/tf-issues#649

Signed-off-by: Pete Batard <pete@akeo.ie>

rpi3: add RPI3_RUNTIME_UART build option ...

Some OSes (e.g. Ubuntu 18.04 LTS on Raspberry Pi 3) may disable the
runtime UART in a manner that prevents the system from rebooting if
ATF tries to send runtime messages there.

Also, we don't want the firmware to share the UART with normal
world, as this can be a DoS attack vector into the secure world.

This patch fixes these 2 issues by introducing new build option
RPI3_RUNTIME_UART, that disables the runtime UART by default.

Fixes ARM-software/tf-issues#647

Signed-off-by: Pete Batard <pete@akeo.ie>

rpi3: Add mem reserve region to DTB if present ...

When a device tree blob is present at a known address, instead of, for
example, relying on the user modifying the Linux command line to warn
about the memory reserved for the Trusted Firmware, pass it on the DTB.

The current code deletes the memory reserved for the default bootstrap
of the Raspberry Pi and adds the region used by the Trusted Firmware.

This system replaces the previous one consisting on adding
``memmap=16M$256M`` to the Linux command line. It's also meant to be
used by U-Boot and any other bootloader that understands DTB files.

Change-Id: I13ee528475fb043d6e8d9e9f24228e37ac3ac436
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

rpi3: Remove references to removed build options ...

Change-Id: Ida5364da1346261cf1636c6a4956a562a5c36ee7
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Merge pull request #1530 from antonio-nino-diaz-arm/an/rpi3-deprecated ...

rpi3: Migrate from deprecated APIs

rpi3: Migrate from deprecated APIs ...

Change-Id: If53b5b2430a06ce8cf6e7948765b560b37afc335
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

rpi3: Remove dependencies on Arm platform code ...

The Raspberry Pi 3 port doesn't actually depend on any Arm platform
code, so the dependencies can be removed.

Change-Id: Ic2f47f5001bebde3862815b1d880a169d82b3f65
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

rpi3: Add support for direct Linux kernel boot ...

This option allows the Trusted Firmware to pass the correct arguments to
a 32 or 64-bit Linux kernel without the need of an intermediate loader
such as U-Boot.

Change-Id: I2b22e8933fad6a614588ace559f893e97329801f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

rpi3: Add support for the stack protector ...

It uses the hardware RNG in a similar way as Juno (it gets 128 bits of
entropy and does xor on them).

It is disabled by default.

Change-Id: I8b3adb61f5a5623716e0e8b6799404c68dd94c60
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

rpi3: Remove broken support of RESET_TO_BL31 ...

There is no way to boot BL31 at the addresses specified in the platform
memory map unless an extra loader is used at address 0x00000000. It is
better to remove it to prevent confusion. Having it enabled was a bug.

Change-Id: I3229fbc080f5996cff47efce8e799bae94e0d5cb
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

rpi3: Detect board revision ...

Implement VideoCore mailbox interface driver and use it to get the board
revision identifier.

For now it is only used to print the model for debug purposes.

This wiki contains the documentation of the mailbox interface:

https://github.com/raspberrypi/firmware/wiki

Change-Id: I11943b99b52cc1409f4a195ebe58eb44ae5b1d6c
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

rpi3: Concatenate BL1 and FIP automatically ...

Add a new default makefile target to concatenate BL1 and the FIP and
generate armstub8.bin. This way it isn't needed to do it manually.

Documentation updated to reflect the changes.

Change-Id: Id5b5b1b7b9f87767db63fd01180ddfea855a7207
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

rpi3: Add support for Trusted Board Boot ...

This patch adds support for TBB to rpi3. The ROTPK is generated at build
time and is included into BL1/BL2. The key and content certificates are
read over semihosting.

Tested-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>

rpi3: add OPTEE support ...

Support for loading optee images as BL32 secure payload.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>

rpi3: Use new console APIs ...

Switch to the new console APIs enabled by setting MULTI_CONSOLE_API=1.

The crash console doesn't use this API, it uses internally the core
functions of the 16550 console.

`bl31_plat_runtime_setup` is no longer needed. When this platform port
was introduced, that function used to disable the console. It was needed
to override that behaviour. The new behaviour is to switch to the
runtime console. The console is registered for all scopes (boot, crash
and runtime) in `rpi3_console_init` so it is not needed to override the
default behaviour anymore.

Update documentation.

Change-Id: If2ee8f91044216183b7ef142e5c05ad6220ae92f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Disable workaround for CVE-2017-5715 on unaffected platforms ...

Change-Id: Ib67b841ab621ca1ace3280e44cf3e1d83052cb73
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

rpi3: Introduce AArch64 Raspberry Pi 3 port ...

This port can be compiled to boot an AArch64 or AArch32 payload with the
build option `RPI3_BL33_AARCH32`.

Note: This is not a secure port of the Trusted Firmware. This port is
only meant to be a reference implementation to experiment with an
inexpensive board in real hardware.

Change-Id: Ide58114299289bf765ef1366199eb05c46f81903
Co-authored-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>