LuminaSensum/arm-trusted-firmware

Fork: 0

LuminaSensum / arm-trusted-firmware

History for arm-trusted-firmware / plat / hisilicon

2018-04-11	ed253f5 Browse files » hikey: clean sram before mcu used ... Clean cache to flush parameters into SRAM before MCU using them. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 11 Apr 2018
	1d99955 Browse files » hikey: save ddr parameters into SRAM ... Store those DDR parameters into SRAM. They may be used by MCU firmware. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 11 Apr 2018
	483dce7 Browse files » hikey: update ddr initialization ... Fix that DDR can't work at 533MHz. Now step to set DDR frequency from 150MHz to 800MHz. DDR could work among these frequency, 150MHz, 266MHz, 400MHz, 533MHz and 800MHz. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 11 Apr 2018
2018-03-29	Unverified 6ab136c Browse files » Merge pull request #1313 from jonathanwright-ARM/jw/MISRA-switch-statements ... Fix switch statements to comply with MISRA rules Dimitris Papastamos authored on 29 Mar 2018 GitHub committed on 29 Mar 2018
	Unverified bd79727 Browse files » Merge pull request #1331 from hzhuang1/reboot_delay ... hikey960: add delay before reset Dimitris Papastamos authored on 29 Mar 2018 GitHub committed on 29 Mar 2018
	Unverified e74af2a Browse files » Merge pull request #1335 from JoelHutton/jh/cleanup_void_pointers ... Clean usage of void pointers to access symbols Dimitris Papastamos authored on 29 Mar 2018 GitHub committed on 29 Mar 2018
2018-03-27	7dcef5e Browse files » hikey960: add delay before reset ... If system is still accessing storage device, reboot operation may cause data broken. So add the flush and delay operation before system reset. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 27 Mar 2018
2018-03-27	9f85f9e Browse files » Clean usage of void pointers to access symbols ... Void pointers have been used to access linker symbols, by declaring an extern pointer, then taking the address of it. This limits symbols values to aligned pointer values. To remove this restriction an IMPORT_SYM macro has been introduced, which declares it as a char pointer and casts it to the required type. Change-Id: I89877fc3b13ed311817bb8ba79d4872b89bfd3b0 Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com> Joel Hutton committed on 27 Mar 2018
2018-03-26	649c48f Browse files » plat: fix switch statements to comply with MISRA rules ... Ensure (where possible) that switch statements in plat comply with MISRA rules 16.1 - 16.7. Change-Id: Ie4a7d2fd10f6141c0cfb89317ea28a755391622f Signed-off-by: Jonathan Wright <jonathan.wright@arm.com> Jonathan Wright committed on 26 Mar 2018
2018-03-12	4368ae0 Browse files » plat/hikey: boot memory layout to dedicated file ... Boot memory layout is specific for a platform, but should not be mixed up with other platform specific attributes. A separate file is much cleaner and better to compare with other platforms. Take a look at plat/poplar where it is done the same way. Moved hikey_def.h to system include folder and moved includes from hikey_def.h to more general platform_def.h. Signed-off-by: Michael Brandl <git@fineon.pw> Michael Brandl authored on 22 Feb 2018 gitfineon committed on 12 Mar 2018
2018-03-08	Unverified bf35944 Browse files » Merge pull request #1277 from hzhuang1/testing/bl2_el3_v0.6 ... hikey: migrate to BL2_EL3 davidcunado-arm authored on 8 Mar 2018 GitHub committed on 8 Mar 2018
2018-03-06	84b589c Browse files » hikey: fix build issue with CLANG ... plat/hisilicon/hikey/hikey_bl1_setup.c:565:47: error: value size does not match register size specified by the constraint and modifier [-Werror,-Wasm-operand-widths] __asm__ volatile ("mrs %0, cpacr_el1" : "=r"(data)); Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 6 Mar 2018
2018-03-06	056b3d4 Browse files » hikey960: fix build issue with CLANG ... plat/hisilicon/hikey960/drivers/pwrc/hisi_pwrc.c:290:20: error: unused function 'hisi_pdc_set_intmask' [-Werror,-Wunused-function] static inline void hisi_pdc_set_intmask(void pdc_base_addr, ^ 1 error generated. Makefile:605: recipe for target 'build/hikey960/release/bl31/hisi_pwrc.o' failed make: ** [build/hikey960/release/bl31/hisi_pwrc.o] Error 1 Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 6 Mar 2018
2018-03-05	4e858ba Browse files » hikey960: move out duplicated code ... Create hikey960_bl_common.c to store duplication initialization code in both BL1 and BL2. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
	19b731e Browse files » hikey960: fix invoking driver init in image load driver ... It's unnecessary to call platform driver initialization in image load driver. We could make bl2_platform_setup() to executing just before SCP_BL2 by setting flag IMAGE_ATTRIB_PLAT_SETUP. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
	d212873 Browse files » hikey960: migrate to bl2_el3 ... Since non-TF ROM is used in HiKey960 platform (Hisilicon Hi3660 SoC), replace BL1 by BL2_EL3 in normal boot mode. When flush images in recovery mode, keep to use BL1. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
	99ffcaf Browse files » hikey960: drop LOAD_IMAGE v1 ... Since LOAD_IMAGE_V2 is always enabled in HiKey960 platform. Drop LOAD_IMAGE v1 to simplify code. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
	8495c03 Browse files » hikey960: fix memory overlapped in memory map ... MAP_TSP_MEM could be either in SRAM or DRAM. When MAP_TSP_MEM is in DRAM, it's overlapped with MAP_DDR. Since TSP_MEM is always configured in DRAM case, it means MAP_OPTEE_PAGEABLE is always disabled. Just remove it. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
	17cf8ab Browse files » hikey960: avoid to dump message when fetch boardid ... The main difference between HiKey960 v1 hardware and HiKey960 v2 hardware is on UART console. But the function of detecting boardid dumps message before console ready. So fix it by removing those messages. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
	054c3e0 Browse files » hikey: move out duplicated code ... Create hikey_bl_common.c to store duplicated initialization code in BL1 and BL2. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
2018-03-04	a628b1a Browse files » hikey: migrate to bl2_el3 ... Since non-TF ROM is used in HiKey platform (Hisilicon Hi6220 SoC), replace BL1 by BL2_EL3 in normal boot mode. When we recovery images in recovery mode, keep to use BL1. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 4 Mar 2018
	a9b3021 Browse files » hikey: clean dcache for SRAM after initialized ... Although SRAM is initialized, DCACHE should be cleaned too. Because MCU is a parrallel core to access SRAM. We need to make sure that initialized value is really written to SRAM before MCU using it. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 4 Mar 2018
	103c213 Browse files » hikey: drop LOAD_IMAGE v1 ... Since LOAD_IMAGE_V2 is always enabled in HiKey platform. Drop LOAD_IMAGE v1 to simplify code. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 4 Mar 2018
2018-02-27	5724481 Browse files » Update ULL() macro and instances of ull to comply with MISRA ... MISRA C-2012 Rule 7.3 violation: lowercase l shall not be used as literal suffixes. This patch resolves this for the ULL() macro by using ULL suffix instead of the ull suffix. Change-Id: Ia8183c399e74677e676956e8653e82375d0e0a01 Signed-off-by: David Cunado <david.cunado@arm.com> David Cunado committed on 27 Feb 2018
2018-02-17	Unverified 1504715 Browse files » Merge pull request #1259 from hzhuang1/fix_uart ... hikey960: avoid hardcode on uart port davidcunado-arm authored on 17 Feb 2018 GitHub committed on 17 Feb 2018
2018-02-16	135d713 Browse files » hikey960: avoid hardcode on uart port ... Avoid hardcode on uart port. The uart port could be auto detected on HiKey960 platform. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 16 Feb 2018
2018-02-07	3b12a6f Browse files » hikey*, poplar: platform.mk: Fix typo in variable assignments ... Signed-off-by: Victor Chong <victor.chong@linaro.org> Victor Chong committed on 7 Feb 2018
	f3d522b Browse files » poplar: Support Trusted OS extra image (OP-TEE header) parsing ... Signed-off-by: Victor Chong <victor.chong@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Victor Chong committed on 7 Feb 2018
	0d8052a Browse files » poplar: Add LOAD_IMAGE_V2 support ... Signed-off-by: Victor Chong <victor.chong@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Victor Chong committed on 7 Feb 2018
	8ad132b Browse files » poplar: Add build option for dram size ... Signed-off-by: Victor Chong <victor.chong@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Victor Chong committed on 7 Feb 2018