Merge pull request #1250 from jollysxilinx/zynqmp-new-eemi-api ...

plat/xilinx: Add support for new platform management APIs for ZynqMP

plat: fix switch statements to comply with MISRA rules ...

Ensure (where possible) that switch statements in plat comply with MISRA
rules 16.1 - 16.7.

Change-Id: Ie4a7d2fd10f6141c0cfb89317ea28a755391622f
Signed-off-by: Jonathan Wright <jonathan.wright@arm.com>

zynqmp: pm: Minor corrections for MISRA compliance ...

Various changes to comply with MISRA static analysis rules

Signed-off-by: Jolly Shah <jollys@xilinx.com>

zynqmp: pm_service: Support multiple SDIO modes ...

Existing database allows to set only single mode for SDIO.
SDIO can have different groups (8 bit, 4 bit and 1 bit).
As there is only single SDIO group in each pin, it is not
 possible to use different mode groups for SDIO.

Extend database in generic way to allow multiuple function
groups in single pin. Add different SDIO groups to pins and
create separate functions for each modes.

Signed-off-by: Rajan Vaja <rajanv@xilinx.com>

zynqmp: pm: Support ATF PM version check ...

Add SMC call to query ATF PM version. This version
can be used by Linux to match with expected version.

Signed-off-by: Rajan Vaja <rajanv@xilinx.com>

zynqmp: pm: Update API version to 1.0 ...

With new EEMI APIs addition, version is updated to 1.0

Signed-off-by: Jolly Shah <jollys@xilinx.com>

zynqmp: Use DDR memory when DEBUG is enabled ...

Define default DDR location to which ATF has to compiled
if DEBUG option is enabled. This is required now, as the ATF cant fit
in OCM with DEBUG option enabled. The default value is 0x1000 and can be
used till 0x7ffff. User can still override as per wish/requirement
using current commandline options.

Signed-off-by: Jolly Shah <jollys@xilinx.com>

zynqmp: pm: Add APIs for pin control queries ...

Add pin control APIs which driver can use to query
pin information from firmware. Using these APIs,
driver do not need to maintain hard-coded pin database.

Major changes in patch are:
- Add pin database with pins, functions and function groups
  information
- Implement APIs for pin information queries
- Update pin control APIs for get/set functions to use new
  pin control database. Remove pin database which was added
  earlier.

Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

zynqmp: pm: Add IOCTLs for global storage access ...

Add IOCTLs to read/write global general storage and
persistent global general storage registers access.

Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

zynqmp: pm: Implement clock APIs ...

- Add clock entries and information to clock database.
- Implement APIs to provide clock topology and other
  information to caller.
- Implement APIs to control clocks and PLLs.

Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

zynqmp: pm: Add clock control EEMI API and ioctl functions ...

These are empty functions with no logic right now. Code
will be added in subsequent commits.

Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

zynqmp: pm: Implement IOCTL APIs for device control ...

Implement ioctl APIs which uses MMIO operations
to configure devices. Below IOCTLs are supported
in this patch:
  * Set tap delay bypass
  * Set SGMII mode
  * SD reset
  * Set SD/MMC tap delay

Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

zynqmp: pm: Implement IOCTL APIs for remoteproc ...

Implement ioctl APIs which uses MMIO operations
to control RPU operations. Below IOCTLs are supported
in this patch:
  * Get RPU operation mode
  * Set RPU operation mode
  * Configure RPU boot address (OCM/TCM)
  * Configure TCM combined mode

Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

zynqmp: pm: Implement pin control APIs for configurations ...

Implement pin control APIs which uses MMIO operations
to set/get values of configuration parameters.

Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

zynqmp: pm: Implement pin control APIs for get/set functions ...

Implement pin control APIs which uses MMIO operations
to set/get functions for the given pin.

Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

zynqmp: pm: Add wrappers for Pin control APIs ...

Add wrappers for pin control APIs. Actual implementation of
these APIs would be done in subsequent changes.

Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

zynqmp: Add new function and node IDs ...

Add new function and node IDs supported by PMUFW in
function list and node list respectively.

Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Update ULL() macro and instances of ull to comply with MISRA ...

MISRA C-2012 Rule 7.3 violation: lowercase l shall not be used as literal suffixes.

This patch resolves this for the ULL() macro by using ULL suffix instead
of the ull suffix.

Change-Id: Ia8183c399e74677e676956e8653e82375d0e0a01
Signed-off-by: David Cunado <david.cunado@arm.com>

Disable workaround for CVE-2017-5715 on unaffected platforms ...

Change-Id: Ib67b841ab621ca1ace3280e44cf3e1d83052cb73
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

zynqmp: pm_service: use zynqmp_ipi APIs ...

Use zynqmp_ipi APIs to access IPI registers in pm_service.
As the zynqmp_ipi APIs doesn't cover IPI buffers, the pm_ipi
in pm_service will still directly access the IPI buffers.

Signed-off-by: Wendy Liang <jliang@xilinx.com>

Add Xilinx ZynqMP IPI mailbox service ...

Add IPI mailbox service to manage Xilinx ZynqMP IPI(Inter Processors
Interrupt) access.

Signed-off-by: Wendy Liang <jliang@xilinx.com>

Introduce ZynqMP IPI implementation ...

Previously, ZynqMP IPI in ATF is only for ZynqMP PM,
This patch is to have a ZynqMP IPI implementation to handle
both ZynqMP PM IPI requirement and IPI mailbox service requirement
which will be introduced next.

We control IPI agents registers access but not IPI buffers access in
this implementation. Each IPI mailbox user will directly access the
IPI buffers.

Signed-off-by: Wendy Liang <jliang@xilinx.com>

Do not enable SVE on pre-v8.2 platforms ...

Pre-v8.2 platforms such as the Juno platform does not have
the Scalable Vector Extensions implemented and so the build
option ENABLE_SVE is set to zero.

This has a minor performance improvement with no functional
impact.

Change-Id: Ib072735db7a0247406f8b60e325b7e28b1e04ad1
Signed-off-by: David Cunado <david.cunado@arm.com>

zynqmp: Migrate to using interrupt properties ...

Change-Id: Ia8503d446cc8b4246013046f6294fea364c9c882
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

zynqmp: Sync function declaration and definition ...

Synchronize argument order between function definition and declaration
of pm_fpga_load.

Fixes ARM-software/tf-issues#514
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

Fix order of remaining platform #includes ...

This fix modifies the order of system includes to meet the ARM TF coding
standard. There are some exceptions to this change in order to retain
header groupings and where there are headers within #if statements.

Change-Id: Ib5b668c992d817cc860e97b29e16ef106d17e404
Signed-off-by: Isla Mitchell <isla.mitchell@arm.com>

zynqmp: Remove duplicate 'const' declaration ...

Fixing compilation errors due to duplicate 'const' keyword:
  plat/xilinx/zynqmp/pm_service/pm_client.c:39:29: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
   static const struct pm_proc const pm_procs_all[] = {
                               ^~~~~

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

Use SPDX license identifiers ...

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by FreeBSD have not been modified.

[0]: https://spdx.org/

Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

zynqmp: Enable workaround for errata 855873 ...

Zynqmp implements a version of the Cortex A53 affected by errata 855873.
Enable the workaround for the errata and silence the warning: "WARNING:
BL31: cortex_a53: errata workaround for 855873 was missing!".

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

Move plat/common source file definitions to generic Makefiles ...

These source file definitions should be defined in generic
Makefiles so that all platforms can benefit. Ensure that the
symbols are properly marked as weak so they can be overridden
by platforms.

NOTE: This change is a potential compatibility break for
non-upstream platforms.

Change-Id: I7b892efa9f2d6d216931360dc6c436e1d10cffed
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>