drivers: imx: mxc_usdhc: Add USDHC driver to support boot EMMC ...

Add USDHC driver to support boot EMMC. Only initialization
and single/multiple block read are tested.

[bod: fixed checkpatch.pl complaints]
[bod: changed name to imx_usdhc for namespace consistency]
[bod: squashed antecedent fixes into this one patch]

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

drivers: mmc: Add missing response type for some commands ...

Add missing response type for SWITCH command and STOP_TRANSMISSION
so that controller can be configured accordingly.

[bod: ported this change from Jun's eMMC patches to the MMC driver]

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

drivers: mmc: Fix R3 response type definition ...

The R3 response type definition should be (1 << 0). Make sure we define the
expected response code in the appropriate fashion.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

drivers: emmc: dw_mmc: Add response flag into response ID definition ...

Add response flag into ID definition so that driver does not
need to handle it again.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

drivers: imx: imx_gpt: Add general purpose timer API binding ...

Add delay timer API so that it can be called by delay timer
layer and used as delay timer globally.

[bod: changed name from imx_delay_timer -> imx_gpt ]

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

drivers: imx: crash-console: Add a mxc_crash_console driver ...

This patch does two main things

- It implements the crash console UART init in assembly, as a
  hard-coded 115200 8N1 assumed from the 24 MHz clock.

  If the clock setup code has not run yet, this code can't work but,
  setting up clocks and clock-gates is way out of scope for this type of
  recovery function.

- It adds code to write a character out of the NXP UART without using any
  stack-based operations when doing so.

- Provides support for crash console in DCE or DTE mode.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

drivers: imx: uart: Add mxc_console ...

- Adds a simple register read/write abstraction to cut-down on the
  amount of typing and text required to access UART registers in this driver.

- Adds a console getc() callback.

- Adds a console putc() callback, translating '\n' to '\r' + '\n'.

- Initializes the MXC UART, take a crude method of calculating the
  BAUD rate generator. The UART clock-gates must have been enabled prior
  to launching the UART init code.
  Special care needs to be taken to ensure the UBIR is initialized before the
  UBMR and we need to ensure that UCR2.SRST comes good before trying to
  program other registers associated with the UART.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

Merge pull request #1542 from antonio-nino-diaz-arm/an/bl31-misra ...

Some MISRA fixes in BL31, cci and smmu

drivers: cci: Fix MISRA defects ...

Change-Id: Ifdb0ceec19d267b14d796b5d31f08f7342190484
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

drivers: smmu: Fix MISRA defects ...

Change-Id: I2954a99d5b72069bcb7bac9d6926c6209d6ba881
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

gic v3: Fix width of types of helper functions ...

Change-Id: I08447b44fffb6e54f9fab957eee369ccbda4247a
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

gic: Fix types ...

Change-Id: I6a2adef87c20f9279446a54b7e69618fba3d2a25
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

gic: Fix definitions ...

Change-Id: I945029ca26ea2e63f0d92c5f33019b882f23bd72
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

gic v3: Turn macros into static inline functions ...

Change-Id: Ib587f12f36810fc7d4f4b8f575195554299b8ed4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

libc: Use printf and snprintf across codebase ...

tf_printf and tf_snprintf are now called printf and snprintf, so the
code needs to be updated.

Change-Id: Iffeee97afcd6328c4c2d30830d4923b964682d71
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Merge pull request #1517 from satheesbalya-arm/sb1_2607_mcd_reg ...

Console: Use callee-saved registers

Console: Use callee-saved registers ...

This allows the console drivers to be implemented in C

Change-Id: Ibac859c4bcef0e92a0dcacc6b58ac19bc69b8342
Signed-off-by: Sathees Balya <sathees.balya@arm.com>

Merge pull request #1516 from antonio-nino-diaz-arm/an/printf ...

Replace stdio.h functions by TF functions

Merge pull request #1520 from robertovargas-arm/cci-dsb ...

cci: Use dsb to wait before reading status register

cci: Use dsb to wait before reading status register ...

The CCI500 TRM explicitily requires completion of the write
operation before the read operation, and it is not guaranteed
by dmb but it is dsb.

Change-Id: Ieeaa0d1a4b8fcb87108dea9b6de03d9c8a150829
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

Merge pull request #1510 from robertovargas-arm/romlib ...

Add support for moving libraries to ROM

drivers/mmc: Fix warning about usage of uninitialized variable ...

Because of -Werror, this causes a build error.

Change-Id: I37a8c4bbfe3f2ced5e17981a2814985919ad483b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

drivers/emmc: remove emmc framework ...

Replace emmc framework by mmc framework.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

drivers/dw_mmc: migrate to mmc framework ...

Migrate dw_mmc driver from emmc framework to mmc framework. The
emmc framework will be abandoned.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

drivers/mmc: set buswidth and speed before reading data ...

It should set buswidth and speed of mmc controller before accessing
mmc.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

drivers/mmc: make mmc_ext_csd aligned with 16 char ...

DMA is always used in mmc driver. So the buffer address should
always follow the DMA limitation.

There're same requirement in mmc_read_blocks()/mmc_write_blocks()
on parameter buf. Since parameter buf comes from io_block driver,
it's already handled in io_block driver.

At here, just make the minimum address alignment on 16 chars.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

drivers/mmc: fix lba param to int ...

mmc_read_blocks()/mmc_write_blocks() derived from io_block_ops_t
type. It means that lba param should be integer type, not
unsigned integer type.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

drivers/mmc: send CMD8 only for SD card in initialization ...

Sending CMD8 before CMD1 just causes to fetch data failure in eMMC.
Check whether it's eMMC first. If it's eMMC, send CMD1 command instead.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

Merge pull request #1505 from Yann-lms/mmc_delays ...

mmc: add required delays when retrying commands

Replace stdio.h functions by TF functions ...

Functions provided by stdio.h such as printf and sprintf are available
in the codebase, but they add a lot of code to the final image if they
are used:

- AArch64: ~4KB
- AArch32: ~2KB in T32, ~3KB in A32

tf_printf and tf_snprintf are a lot more simple, but it is preferable
to use them when possible because they are also used in common code.

Change-Id: Id09fd2b486198fe3d79276e2c27931595b7ba60e
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>