plat/arm: Introduce FVP Versatile Express platform. ...

This patch adds support for Versatile express FVP (Fast models).
Versatile express is a family of platforms that are based on ARM v7.
Currently this port has only been tested on Cortex A7, although it
should work with other ARM V7 cores that support LPAE, generic timers,
VFP and hardware divide. Future patches will support other
cores like Cortex A5 that dont support features like LPAE
and hardware divide. This platform is tested on and only expected to
work on single core models.

Change-Id: I10893af65b8bb64da7b3bd851cab8231718e61dd
Signed-off-by: Usama Arif <usama.arif@arm.com>

Rename PLAT_ARM_BL31_RUN_UART* variable ...

The variable is renamed to PLAT_ARM_RUN_UART as
the UART is used outside BL31 as well.

Change-Id: I00e3639dfb2001758b7d24548c11236c6335f64a
Signed-off-by: Usama Arif <usama.arif@arm.com>

Merge pull request #1824 from antonio-nino-diaz-arm/an/move-dyn-xlat ...

fvp: trusty: Move dynamic xlat enable to platform

stm32mp1: update clock driver ...

Remove useless private structure in function prototypes.
Add a reference counter on clocks.
Prepare for future secured/shared/non-secured clocks.

Change-Id: I3dbed81721da5ceff5e10b2c4155b1e340c036ee
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>

stm32mp1: use functions to retrieve some peripheral addresses ...

PWR, RCC, DDRPHYC & DDRCTRL addresses can be retrieved from device tree.
Platform asserts the value read from the DT are the SoC addresses.

Change-Id: I43f0890b51918a30c87ac067d3780ab27a0f59de
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>

stm32mp1: split clkfunc code ...

Create a new file stm32mp_clkfunc.c to put functions that could be common
between several platforms.

Change-Id: Ica915c796b162b2345056b33328acc05035a242c
Signed-off-by: Yann Gautier <yann.gautier@st.com>

stm32mp1: update I2C and PMIC drivers ...

Regulator configuration at boot takes more information from DT.
I2C configuration from DT is done in I2C driver.
I2C driver manages more transfer modes.
The min voltage of buck1 should also be increased to 1.2V,
else the platform does not boot.

Heavily modifies stm32_i2c.c since many functions move inside the source
file to remove redundant declarations.

Change-Id: I0bee5d776cf3ff15e687427cd6abc06ab237d025
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>

Introduce timeout_init_us/timeout_elapsed() delay tracking with CNTPCT. ...

timeout_init_us(some_timeout_us); returns a reference to detect
timeout for the provided microsecond delay value from current time.

timeout_elapsed(reference) return true/false whether the reference
timeout is elapsed.

This change is inspired by the OP-TEE OS timeout resources [1].

 [1] https://github.com/OP-TEE/optee_os/blob/3.4.0/core/arch/arm/include/kernel/delay.h#L45

Change-Id: Id81ff48aa49693f555dc621064878417101d5587
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>

stm32mp1: remove some dependencies on clocks and reset in drivers ...

Include all RCC, clocks and reset headers from stm32mp1_def.h
which if exported to the firmware through platform_def.h.
The same dependency removal is done in common code as well.
Some useless includes are also removed in stm32_sdmmc2 driver.

Change-Id: I731ea5775c3fdb7f7b0c388b93923ed5e84b8d3f
Signed-off-by: Yann Gautier <yann.gautier@st.com>

stm32mp1: make functions and macros more common ...

Mainly remove suffix 1 from prefix stm32mp1 in several macros and functions
that can be used in drivers shared by different platforms.

Change-Id: I2295c44f5b1edac7e80a93c0e8dfd671b36e88e7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

stm32mp1: split code between common and private parts ...

Some parts of code could be shared with platform derivatives,
or new platforms.
A new folder plat/st/common is created to put common parts.

stm32mp_common.h is a common API aggregate.

Remove some casts where applicable.
Fix some types where applicable.
Remove also some platform includes that are already in stm32mp1_def.h.

Change-Id: I46d763c8d9e15732d1ee7383207fd58206d7f583
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Merge pull request #1819 from thloh85-intel/integration ...

plat: intel: Fix faulty DDR calibration value

Merge pull request #1813 from oscardagrach/hikey960-iomcu-dma ...

hikey960: enable IOMCU DMAC

Merge pull request #1816 from grandpaul/paulliu-warp7-multiconsoleapi ...

imx: warp7: Migrate to MULTI_CONSOLE_API

plat: intel: Fix faulty DDR calibration value ...

A DDR calibration value is missing write mask, causing ECC DDR calibration
to fail. This patch addresses the issue. ECC should also be scrubbed before
MMU initializes, thus the scrubbing is moved to ddr intialization phase.

Signed-off-by: Loh Tien Hock <tien.hock.loh@intel.com>

fvp: trusty: Move dynamic xlat enable to platform ...

Rather than letting the Trusty makefile set the option to enable dynamic
translation tables, make platforms do it themselves.

This also allows platforms to replace the implementation of the
translation tables library as long as they use the same function
prototypes.

Change-Id: Ia60904f61709ac323addcb57f7a83391d9e21cd0
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

imx: warp7: Migrate to MULTI_CONSOLE_API ...

This commit migrates to MULTI_CONSOLE_API for IMX Warp7 board.
We also rename the functions in imx_uart driver to more specific one.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>

ti: k3: common: Do not release processor control on startup ...

ATF should be the only host needing to control a processor that it has
started. ATF will need this control to stop the core later. Do not
relinquish control of a core after starting the core.

Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: drivers: ti_sci: Use non-blocking TI-SCI messages for power down ...

Now that we have non-blocking TI-SCI functions we can initiate the shutdown
sequence from the PSCI handler without needing the ti_sci_proc_shutdown
helper function, which is removed. This gives us the greater control and
flexibility that will be needed when cluster power down sequences are added.

Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: drivers: ti_sci: Add non-blocking TI-SCI messages ...

Most TI-SCI functions request an ACK and wait until it is received. For
some power sequence tasks we cannot wait but instead queue messages
asynchronously. Three messages have been identified that will need to
be used in this way. Add non-waiting versions of these functions.

Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: drivers: ti_sci: Request and check for ACK by default ...

Currently almost all TI-SCI messages request and check for an ACK from
the system firmware. Move this into a common place to remove the same
from each function.

Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: drivers: ti_sci: Add exclusive device accessors ...

When a device is requested with TI-SCI its control can be made exclusive
to the requesting host. This was currently the default but is not what
is needed most of the time. Add _exclusive versions of the request
functions and remove the exclusive flag from the default version.

Signed-off-by: Andrew F. Davis <afd@ti.com>

ti: k3: drivers: ti_sci: Internalize raw get/set state functions ...

The raw get and set state functions for both devices and clocks
are only meant for use internal to the TI-SCI driver, the same
functionality is available from the other API that call into
these. Remove them from the external interface and make them
static scope to the driver.

Signed-off-by: Andrew F. Davis <afd@ti.com>

hikey960: enable IOMCU DMAC ...

There exists a third DMA controller on the hi3660
SoC called the IOMCU DMAC. This controller is used by
peripherals like SPI2 and UART3. Initialize channels 4-7
as non-secure, while 0-3 remain reserved and secure.

Signed-off-by: Ryan Grachek <ryan@edited.us>

locks: linker variables to calculate per-cpu bakery lock size ...

This patch introduces explicit linker variables to mark the start and
end of the per-cpu bakery lock section to help bakery_lock_normal.c
calculate the size of the section. This patch removes the previously
used '__PERCPU_BAKERY_LOCK_SIZE__' linker variable to make the code
uniform across GNU linker and ARM linker.

Change-Id: Ie0c51702cbc0fe8a2076005344a1fcebb48e7cca
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra186: trampoline: include bl_common.h ...

This patch includes bl_common.h from plat_trampoline.S to link with
the __BL31_END__ symbol.

Change-Id: Ie66c5009018472607db668583c9a0b3553f0ae73
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra186: use common 'BL31_BASE' variable ...

This patch modfies the 'tegra_soc_pwr_domain_power_down_wfi' handler
to use BL31_BASE variable, provided by bl_common.h

Change-Id: I9747228d0193c1ae6999284458b9f866955a61a2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Remove unused function symbols ...

This patch removes the unused functions that are marked as .global
in code but not defined anywhere in the code.

Change-Id: Ia5057a77c0b0b4a61043eab868734cd3437304cc
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: remove circular dependency with common_def.h ...

This patch stops including common_def.h from platform_def.h to
fix a circular depoendency between them.

This means platform_def.h now has to define the linker macros:
* PLATFORM_LINKER_FORMAT
* PLATFORM_LINKER_ARCH

Change-Id: Icd540b1bd32fb37e0e455e9146c8b7f4b314e012
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: define CACHE_WRITEBACK_GRANULE for scatterfile ...

The scatterfile to support armlink, does not seem to support
shift operator. To handle this define CACHE_WRITEBACK_GRANULE with
the direct value.

Change-Id: I19afc7cb9c55a08cb0703f284d91018d3214353f
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>