Readjust BL2 size after sharing Mbed TLS heap ...

After introducing the Mbed TLS shared heap optimisation, reducing BL2
size by 3 pages didn't leave enough space for growth. We give 1 page
back to maximum BL2 size.

Change-Id: I4f05432f00b923693160f69a4e4ec310a37a2b16
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

ARMv7: Alias dmbld() to dmb() ...

'dmb ld' is not a recognized instruction for ARMv7. Since generic code
may use 'dmb ld', alias it to 'dmb' when building for ARMv7.

Change-Id: I502f360cb6412897ca9580b725d9f79469a7612e
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Merge pull request #1515 from bryanodonoghue/atf-master+linaro-warp7-squash-v4 ...

Atf master+linaro warp7 squash v4

Merge pull request #1554 from jts-arm/mbed ...

Mbed TLS shared heap

cpus: denver: Implement static workaround for CVE-2018-3639 ...

For Denver CPUs, this approach enables the mitigation during EL3
initialization, following every PE reset. No mechanism is provided to
disable the mitigation at runtime.

This approach permanently mitigates the EL3 software stack only. Other
software components are responsible to enable it for their exception
levels.

TF-A implements this approach for the Denver CPUs with DENVER_MIDR_PN3
and earlier:

*   By setting bit 11 (Disable speculative store buffering) of
    `ACTLR_EL3`

*   By setting bit 9 (Disable speculative memory disambiguation) of
    `ACTLR_EL3`

TF-A implements this approach for the Denver CPUs with DENVER_MIDR_PN4
and later:

*   By setting bit 18 (Disable speculative store buffering) of
    `ACTLR_EL3`

*   By setting bit 17 (Disable speculative memory disambiguation) of
    `ACTLR_EL3`

Change-Id: If1de96605ce3f7b0aff5fab2c828e5aecb687555
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

cpus: denver: reset power state to 'C1' on boot ...

Denver CPUs expect the power state field to be reset to 'C1'
during boot. This patch updates the reset handler to reset the
ACTLR_.PMSTATE field to 'C1' state during CPU boot.

Change-Id: I7cb629627a4dd1a30ec5cbb3a5e90055244fe30c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

drivers: emmc: dw_mmc: Add response flag into response ID definition ...

Add response flag into ID definition so that driver does not
need to handle it again.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

Reduce BL2 size for FVP ...

This patch reduces BL2 size by 12kB. Thanks to the shared Mbed TLS heap
between BL1 and BL2, BL2 now requires less memory since it doesn't need
to allocate a heap anymore.

Change-Id: I58a15f8c424273650c9f55112abe88105b6cdbae
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

Support shared Mbed TLS heap for FVP ...

This patch introduces the shared Mbed TLS heap optimisation for Arm
platforms. The objective is the Mbed TLS heap to be shared between BL1
and BL2 so as to not allocate the heap memory twice. To achieve that,
the patch introduces all the necessary helpers for implementing this
optimisation. It also applies it for FVP.

Change-Id: I6d85eaa1361517b7490956b2ac50f5fa0d0bb008
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

Prepare Mbed TLS drivers for shared heap ...

The Mbed TLS drivers, in order to work, need a heap for internal usage.
This heap, instead of being directly referenced by the drivers, now it
is being accessed indirectly through a pointer. Also, the heap, instead
of being part of the drivers, now it is being received through the
plat_get_mbedtls_heap() function. This function requests a heap from the
current BL image which utilises the Mbed TLS drivers.

Those changes create the opportunity for the Mbed TLS heap to be shared
among different images, thus saving memory. A default heap
implementation is provided but it can be overridden by a platform
specific, optimised implemenetation.

Change-Id: I286a1f10097a9cdcbcd312201eea576c18d157fa
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

Merge pull request #1540 from MISL-EBU-System-SW/marvell-updates-18.09 ...

Marvell updates 18.09

plat: svc: ap807: add SVC configuration for AP807 ...

- add svc configuration according to values burnt
  to the chip efuse

Change-Id: Icf5d7cc41bc09ac2244d0a126106e681afebb064
Signed-off-by: Christine Gharzuzi <chrisg@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

plat: a8k: enable PMU overflow interrupt handler ...

This patch enables handling PMU overflow IRQ by GIC SPI's
directly in EL3. Also implement additional SMC routine,
which can disable the solution on demand in runtime.

Since it is possible to configure PMU interrupt trigger type
in the MADT ACPI table, it is enough to set it only once in EL3
during initialization.

Change-Id: Ie76aa62ccc4fd7cabfec9e3d5ed9970ada1c1b2a
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

gicv2: enable configuring IRQ trigger type ...

This patch introduces new helper routines that allow
configuring the individual IRQs to be edge/level-triggered
via GICD_ICFGR registers. This is helpful to modify
the default configuration of the non-secure GIC SPI's, which
are all set during initialization to be level-sensitive.

Change-Id: I23deb4a0381691a686a3cda52405aa1dfd5e56f2
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

plat: marvell: rename common include file ...

Rename a8k_common.h to armada_common.h to keep the same header
name across all other Marvell Armada platforms.
This is especially useful since various Marvell platforms may
use common platform files and share the driver modules.

Change-Id: I7262105201123d54ccddef9aad4097518f1e38ef
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Merge pull request #1547 from semihalf-dabros-jan/semihalf-dabros-jan/fix_errmisc ...

AARCH64: Fix credentials for ERXMISC0_EL1 and ERXMISC1_EL1

Fix MISRA defects in log helpers ...

No functional changes.

Change-Id: I850f08718abb69d5d58856b0e3de036266d8c2f4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Merge pull request #1542 from antonio-nino-diaz-arm/an/bl31-misra ...

Some MISRA fixes in BL31, cci and smmu

Merge pull request #1539 from antonio-nino-diaz-arm/an/gic-misra ...

MISRA fixes for the GIC driver

AARCH64: Fix credentials for ERXMISC0_EL1 and ERXMISC1_EL1 ...

fixes arm-software/tf-issues#620

Signed-off-by: Jan Dabros <jsd@semihalf.com>

drivers: cci: Fix MISRA defects ...

Change-Id: Ifdb0ceec19d267b14d796b5d31f08f7342190484
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

drivers: smmu: Fix MISRA defects ...

Change-Id: I2954a99d5b72069bcb7bac9d6926c6209d6ba881
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Fix MISRA defects in some common headers ...

Change-Id: I8fbb4c785e7e07c7241e0c399a9b65161985c9df
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Fix MISRA defects in BL31 common code ...

Change-Id: I5993b425445ee794e6d2a792c244c0af53640655
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

plat/arm: gic: Fix macros ...

Change-Id: I130e35d55c474ecd80f9a825be23620d5bc1a715
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

gic: Fix types ...

Change-Id: I6a2adef87c20f9279446a54b7e69618fba3d2a25
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

gic: Fix definitions ...

Change-Id: I945029ca26ea2e63f0d92c5f33019b882f23bd72
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

gic v3: Turn macros into static inline functions ...

Change-Id: Ib587f12f36810fc7d4f4b8f575195554299b8ed4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

backtrace: Print backtrace in assert() and panic() ...

When any of these functions is called the backtrace will be printed to
the console.

Change-Id: Id60842df824b320c485a9323ed6b80600f4ebe35
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

backtrace: Introduce backtrace function ...

This function diplays the backtrace, the current EL and security state
to allow a post-processing tool to choose the right binary to interpret
the dump.

The output can be fed to GNU addr2line to resolve function names given
an ELF binary compiled with debug information. The "-i" flag is
recommended to improve display in case of inlined functions. The *.dump
files generated during the build process can also be used.

The function works in AArch64 and AArch32. In AArch32 it only works in
A32 mode (without T32 interworking), which is enforced in the Makefile.

Sample output of a backtrace at EL3:

    BACKTRACE: START: function_name
    0: EL3: 0x798
    1: EL3: 0x538
    2: EL3: 0x550
    3: EL3: 0x55c
    4: EL3: 0x568
    5: EL3: 0x5a8
    6: EL3: 0xf4
    BACKTRACE: END: function_name

In order to enable it the new option ENABLE_BACKTRACE must be set to 1.
This option is set to 1 by default only in AArch64 debug builds. As
usual, it can be overridden by the platform makefile and in the build
command line.

Change-Id: Icaff39b0e5188329728be2f3c72b868b2368e794
Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>