2019-09-12 |
Remove RSA PKCS#1 v1.5 support from cert_tool
...
Support for PKCS#1 v1.5 was deprecated in SHA 1001202 and fully removed
in SHA fe199e3, however, cert_tool is still able to generate
certificates in that form. This patch fully removes the ability for
cert_tool to generate these certificates.
Additionally, this patch also fixes a bug where the issuing certificate
was a RSA and the issued certificate was EcDSA. In this case, the issued
certificate would be signed using PKCS#1 v1.5 instead of RSAPSS per
PKCS#1 v2.1, preventing TF-A from verifying the image signatures. Now
that PKCS#1 v1.5 support is removed, all certificates that are signed
with RSA now use the more modern padding scheme.
Change-Id: Id87d7d915be594a1876a73080528d968e65c4e9a
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
Justin Chadwell
committed
on 12 Sep 2019
|
Add documentation for new KEY_SIZE option
...
This patch adds documentation for the new KEY_SIZE build option that is
exposed by cert_create, and instructions on how to use it.
Change-Id: I09b9b052bfdeeaca837e0f0026e2b01144f2472c
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
Justin Chadwell
committed
on 12 Sep 2019
|
Merge "doc: Updated user guide with new Mbed TLS version number" into integration
Soby Mathew
authored
on 12 Sep 2019
TrustedFirmware Code Review
committed
on 12 Sep 2019
|
Merge changes from topic "jc/mte_enable" into integration
...
* changes:
Add documentation for CTX_INCLUDE_MTE_REGS
Enable MTE support in both secure and non-secure worlds
Soby Mathew
authored
on 12 Sep 2019
TrustedFirmware Code Review
committed
on 12 Sep 2019
|
2019-09-11 |
Add UBSAN support and handlers
...
This patch adds support for the Undefined Behaviour sanitizer. There are
two types of support offered - minimalistic trapping support which
essentially immediately crashes on undefined behaviour and full support
with full debug messages.
The full support relies on ubsan.c which has been adapted from code used
by OPTEE.
Change-Id: I417c810f4fc43dcb56db6a6a555bfd0b38440727
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
Justin Chadwell
committed
on 11 Sep 2019
|
2019-09-09 |
Add documentation for CTX_INCLUDE_MTE_REGS
...
A new build flag, CTX_INCLUDE_MTE_REGS, has been added; this patch adds
documentation for it in the User Guide along with instructions of what
different values mean.
Change-Id: I430a9c6ced06b1b6be317edbeff4f5530e30f63a
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
Justin Chadwell
committed
on 9 Sep 2019
|
2019-09-04 |
doc: Updated user guide with new Mbed TLS version number
...
Signed-off-by: zelalem-aweke <zelalem.aweke@arm.com>
Change-Id: Ib12ecc0b283274c74cdfa57caf9e1a105dce3afe
zelalem-aweke
committed
on 4 Sep 2019
|
2019-08-01 |
doc: Suggest to use the latest version 8.3 of GCC
...
At the time of writting, GCC 8.3-2019.03 is the latest version available
on developer.arm.com.
Switch to bare-metal toolchain (arm-eabi-) for AArch32. This allows to
have a finer control on the use of floating-point and SIMD instructions.
Change-Id: I4438401405eae1e5f6d531b0162e8fa06f69135e
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Louis Mayencourt
committed
on 1 Aug 2019
|
2019-07-10 |
Rename Cortex-Deimos to Cortex-A77
...
Change-Id: I755e4c42242d9a052570fd1132ca3d937acadb13
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Balint Dobszay
committed
on 10 Jul 2019
|
2019-06-06 |
doc: Document E and W build options
...
Change-Id: I0d9dbef7041fcf950bcafcdbbc17c72b4dea9e40
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Ambroise Vincent
committed
on 6 Jun 2019
|
2019-05-30 |
Further fixes to documentation links
...
Change-Id: Ib021c721652d96f6c06ea18741f19a72bba1d00f
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
John Tsichritzis
committed
on 30 May 2019
|
2019-05-24 |
Add support for Branch Target Identification
...
This patch adds the functionality needed for platforms to provide
Branch Target Identification (BTI) extension, introduced to AArch64
in Armv8.5-A by adding BTI instruction used to mark valid targets
for indirect branches. The patch sets new GP bit [50] to the stage 1
Translation Table Block and Page entries to denote guarded EL3 code
pages which will cause processor to trap instructions in protected
pages trying to perform an indirect branch to any instruction other
than BTI.
BTI feature is selected by BRANCH_PROTECTION option which supersedes
the previous ENABLE_PAUTH used for Armv8.3-A Pointer Authentication
and is disabled by default. Enabling BTI requires compiler support
and was tested with GCC versions 9.0.0, 9.0.1 and 10.0.0.
The assembly macros and helpers are modified to accommodate the BTI
instruction.
This is an experimental feature.
Note. The previous ENABLE_PAUTH build option to enable PAuth in EL3
is now made as an internal flag and BRANCH_PROTECTION flag should be
used instead to enable Pointer Authentication.
Note. USE_LIBROM=1 option is currently not supported.
Change-Id: Ifaf4438609b16647dc79468b70cd1f47a623362e
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Alexei Fedorov
committed
on 24 May 2019
|
2019-05-22 |
doc: Use proper note and warning annotations
...
The documentation contains plenty of notes and warnings. Enable
special rendering of these blocks by converting the note prefix
into a .. note:: annotation.
Change-Id: I34e26ca6bf313d335672ab6c2645741900338822
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Paul Beesley
committed
on 22 May 2019
|
doc: Set correct syntax highlighting style
...
Several code blocks do not specify a language for syntax
highlighting. This results in Sphinx using a default highlighter
which is Python.
This patch adds the correct language to each code block that doesn't
already specify it.
Change-Id: Icce1949aabfdc11a334a42d49edf55fa673cddc3
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Paul Beesley
committed
on 22 May 2019
|
doc: Remove per-page contents lists
...
These are no longer needed as there will always be a table of contents
rendered to the left of every page.
Some of these lists can be quite long and, when opening a page, the
reader sees nothing but a huge list of contents! After this patch,
the document contents are front-and-centre and the contents are
nicely rendered in the sidebar without duplication.
Change-Id: I444754d548ec91d00f2b04e861de8dde8856aa62
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Paul Beesley
committed
on 22 May 2019
|
doc: Reword document titles
...
This patch attempts to standardise the document titles as well as
adding titles to documents that were missing one. The aim is to
remove needless references to "TF-A" or "Trusted Firmware" in the
title of every document and to make sure that the title matches
with the document content.
Change-Id: I9b93ccf43b5d57e8dc793a5311b8ed7c4dd245cc
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Paul Beesley
committed
on 22 May 2019
|
2019-05-21 |
doc: Move documents into subdirectories
...
This change creates the following directories under docs/
in order to provide a grouping for the content:
- components
- design
- getting_started
- perf
- process
In each of these directories an index.rst file is created
and this serves as an index / landing page for each of the
groups when the pages are compiled. Proper layout of the
top-level table of contents relies on this directory/index
structure.
Without this patch it is possible to build the documents
correctly with Sphinx but the output looks messy because
there is no overall hierarchy.
Change-Id: I3c9f4443ec98571a56a6edf775f2c8d74d7f429f
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Paul Beesley
committed
on 21 May 2019
|