2017-12-15 |
Add support to left-pad with zeroes in tf_printf
...
Add support to formats %i, %d, %p, %x and %u for left-padding numbers
with zeroes (e.g. `%08x`).
Change-Id: Ifd4795a82a8d83da2c00b44b9e482a2d9be797e3
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 15 Dec 2017
|
2017-12-05 |
Unify cache flush code path after image load
...
Previously the cache flush happened in 2 different places in code
depending on whether TRUSTED_BOARD_BOOT is enabled or not. This
patch unifies this code path for both the cases. The `load_image()`
function is now made an internal static function.
Change-Id: I96a1da29d29236bbc34b1c95053e6a9a7fc98a54
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Soby Mathew
committed
on 5 Dec 2017
|
2017-11-08 |
ARMv7 may not support Virtualization Extensions
...
ARMv7-A Virtualization extensions brings new instructions and resources
that were supported by later architectures. Reference ARM ARM Issue C.c
[DDI0406C_C].
ERET and extended MSR/MRS instructions, as specified in [DDI0406C_C] in
ID_PFR1 description of bits[15:12] (Virtualization Extensions):
A value of 0b0001 implies implementation of the HVC, ERET, MRS
(Banked register), and MSR (Banked register) instructions. The ID_ISARs
do not identify whether these instructions are implemented.
UDIV/SDIV were introduced with the Virtualization extensions, even if
not strictly related to the virtualization extensions.
If ARMv7 based platform does not set ARM_CORTEX_Ax=yes, platform
shall define ARMV7_SUPPORTS_VIRTUALIZATION to enable virtualization
extension related resources.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Etienne Carriere
committed
on 8 Nov 2017
|
2017-11-06 |
Merge pull request #1153 from robertovargas-arm/fix-macros
...
Avoid use of undefined macros
davidcunado-arm
authored
on 6 Nov 2017
GitHub
committed
on 6 Nov 2017
|
2017-11-01 |
Include debug.h in debug.S
...
debug.S was using macros defined in debug.h, but since it didn't
include it, these macros were taking the value 0, which means that
all the preprocessor conditionals were wrong.
Change-Id: If4ca81cc5a1662991589f914a2557ceff0eaaede
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Roberto Vargas
committed
on 1 Nov 2017
|
2017-10-24 |
Add platform hooks for boot redundancy support
...
These hooks are intended to allow one platform to try load
images from alternative places. There is a hook to initialize
the sequence of boot locations and a hook to pass to the next
sequence.
Change-Id: Ia0f84c415208dc4fa4f9d060d58476db23efa5b2
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Roberto Vargas
committed
on 24 Oct 2017
|
2017-09-11 |
Implement log framework
...
This patch gives users control over logging messages printed from the C
code using the LOG macros defined in debug.h Users now have the ability
to reduce the log_level at run time using the tf_log_set_max_level()
function. The default prefix string can be defined by platform by
overriding the `plat_log_get_prefix()` platform API which is also
introduced in this patch.
The new log framework results in saving of some RO data. For example,
when BL1 is built for FVP with LOG_LEVEL=LOG_LEVEL_VERBOSE, resulted
in saving 384 bytes of RO data and increase of 8 bytes of RW data. The
framework also adds about 108 bytes of code to the release build of FVP.
Fixes ARM-software/tf-issues#462
Change-Id: I476013d9c3deedfdd4c8b0b0f125665ba6250554
Co-authored-by: Eleanor Bonnici <Eleanor.bonnici@arm.com>
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Soby Mathew
committed
on 11 Sep 2017
|
Introduce tf_vprintf() and tf_string_print()
...
This patch introduces tf_vprintf() and tf_string_print() APIs
which is needed by the logging framework introduced in a later
patch.
Change-Id: Ie4240443d0e04e070502b51e371e546dd469fd33
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Soby Mathew
committed
on 11 Sep 2017
|
2017-08-21 |
Fix x30 reporting for unhandled exceptions
...
Some error paths that lead to a crash dump will overwrite the value in
the x30 register by calling functions with the no_ret macro, which
resolves to a BL instruction. This is not very useful and not what the
reader would expect, since a crash dump should usually show all
registers in the state they were in when the exception happened. This
patch replaces the offending function calls with a B instruction to
preserve the value in x30.
Change-Id: I2a3636f2943f79bab0cd911f89d070012e697c2a
Signed-off-by: Julius Werner <jwerner@chromium.org>
Julius Werner
committed
on 21 Aug 2017
|
2017-06-14 |
Tegra: enable 'signed-comparison' compilation warning/errors
...
This patch enables the 'sign-compare' flag, to enable warning/errors
for comparisons between signed/unsigned variables. The warning has
been enabled for all the Tegra platforms, to start with.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Varun Wadekar
committed
on 14 Jun 2017
|
2017-05-24 |
Introduce `tf_snprintf`
...
This is a reduced version of `snprintf` that only supports formats '%d',
'%i' and '%u'. It can be used when the full `snprintf` is not needed in
order to save memory. If it finds an unknown format specifier, it
prints an error message and panics.
Change-Id: I2cb06fcdf74cda2c43caf73ae0762a91499fc04e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 24 May 2017
|
2017-05-15 |
Align tf_printf implementation between AArch32 and AArch64
...
No need for these wrapper functions anymore. The compiler-rt builtins
provide runtime support for 64-bit division and modulo operations.
Change-Id: Ib785d37c86f0c82ebd34c35023a4c1822c03e7df
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
dp-arm
committed
on 15 May 2017
|
2017-05-04 |
Merge pull request #925 from dp-arm/dp/spdx
...
Use SPDX license identifiers
davidcunado-arm
authored
on 4 May 2017
GitHub
committed
on 4 May 2017
|
2017-05-03 |
Use SPDX license identifiers
...
To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.
NOTE: Files that have been imported by FreeBSD have not been modified.
[0]: https://spdx.org/
Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
dp-arm
committed
on 3 May 2017
|
2017-04-26 |
Update terminology: standard SMC to yielding SMC
...
Since Issue B (November 2016) of the SMC Calling Convention document
standard SMC calls are renamed to yielding SMC calls to help avoid
confusion with the standard service SMC range, which remains unchanged.
http://infocenter.arm.com/help/topic/com.arm.doc.den0028b/ARM_DEN0028B_SMC_Calling_Convention.pdf
This patch adds a new define for yielding SMC call type and deprecates
the current standard SMC call type. The tsp is migrated to use this new
terminology and, additionally, the documentation and code comments are
updated to use this new terminology.
Change-Id: I0d7cc0224667ee6c050af976745f18c55906a793
Signed-off-by: David Cunado <david.cunado@arm.com>
David Cunado
committed
on 26 Apr 2017
|
2017-04-24 |
Merge pull request #911 from danh-arm/dh/refactor-bl2-image-load
...
Minor refactor of BL2 image load v2
davidcunado-arm
authored
on 24 Apr 2017
GitHub
committed
on 24 Apr 2017
|
2017-04-20 |
Remove build option `ASM_ASSERTION`
...
The build option `ENABLE_ASSERTIONS` should be used instead. That way
both C and ASM assertions can be enabled or disabled together.
All occurrences of `ASM_ASSERTION` in common code and ARM platforms have
been replaced by `ENABLE_ASSERTIONS`.
ASM_ASSERTION has been removed from the user guide.
Change-Id: I51f1991f11b9b7ff83e787c9a3270c274748ec6f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 20 Apr 2017
|
2017-04-19 |
Minor refactor of BL2 image load v2
...
Previously, get_next_bl_params_from_mem_params_desc() populated arg0
in the EL3 runtime entrypoint with a bl_params_t pointer. This is the
responsibility of the generic LOAD_IMAGE_V2 framework instead of the
descriptor-based image loading utility functions. Therefore this patch
moves that code to bl2_load_images().
Also, this patch moves the code that flushes the bl_params structure to
flush_bl_params_desc(), together with the other descriptor-based image
loading flushing code.
Change-Id: I4541e3f50e3878dde7cf89e9e8f31fe0b173fb9d
Signed-off-by: Dan Handley <dan.handley@arm.com>
Dan Handley
committed
on 19 Apr 2017
|
Add `ENABLE_ASSERTIONS` build option
...
Add the new build option `ENABLE_ASSERTIONS` that controls whether or
not assert functions are compiled out. It defaults to 1 for debug builds
and to 0 for release builds.
Additionally, a following patch will be done to allow this build option
to hide auxiliary code used for the checks done in an `assert()`. This
code is is currently under the DEBUG build flag.
Assert messages are now only printed if LOG_LEVEL >= LOG_LEVEL_INFO,
which is the default for debug builds.
This patch also updates the User Guide.
Change-Id: I1401530b56bab25561bb0f274529f1d12c5263bc
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 19 Apr 2017
|
2017-03-31 |
Remove dead loops in assert() in C and ASM
...
The desired behaviour is to call `plat_panic_handler()`, and to use
`no_ret` to do so from ASM.
Change-Id: I88b2feefa6e6c8f9bf057fd51ee0d2e9fb551e4f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 31 Mar 2017
|
Add and use plat_crash_console_flush() API
...
This API makes sure that all the characters sent to the crash console
are output before returning from it.
Porting guide updated.
Change-Id: I1785f970a40f6aacfbe592b6a911b1f249bb2735
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 31 Mar 2017
|
2017-03-08 |
Simplify translation tables headers dependencies
...
The files affected by this patch don't really depend on `xlat_tables.h`.
By changing the included file it becomes easier to switch between the
two versions of the translation tables library.
Change-Id: Idae9171c490e0865cb55883b19eaf942457c4ccc
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 8 Mar 2017
|
2017-02-06 |
Introduce unified API to zero memory
...
Introduce zeromem_dczva function on AArch64 that can handle unaligned
addresses and make use of DC ZVA instruction to zero a whole block at a
time. This zeroing takes place directly in the cache to speed it up
without doing external memory access.
Remove the zeromem16 function on AArch64 and replace it with an alias to
zeromem. This zeromem16 function is now deprecated.
Remove the 16-bytes alignment constraint on __BSS_START__ in
firmware-design.md as it is now not mandatory anymore (it used to comply
with zeromem16 requirements).
Change the 16-bytes alignment constraints in SP min's linker script to a
8-bytes alignment constraint as the AArch32 zeromem implementation is now
more efficient on 8-bytes aligned addresses.
Introduce zero_normalmem and zeromem helpers in platform agnostic header
that are implemented this way:
* AArch32:
* zero_normalmem: zero using usual data access
* zeromem: alias for zero_normalmem
* AArch64:
* zero_normalmem: zero normal memory using DC ZVA instruction
(needs MMU enabled)
* zeromem: zero using usual data access
Usage guidelines: in most cases, zero_normalmem should be preferred.
There are 2 scenarios where zeromem (or memset) must be used instead:
* Code that must run with MMU disabled (which means all memory is
considered device memory for data accesses).
* Code that fills device memory with null bytes.
Optionally, the following rule can be applied if performance is
important:
* Code zeroing small areas (few bytes) that are not secrets should use
memset to take advantage of compiler optimizations.
Note: Code zeroing security-related critical information should use
zero_normalmem/zeromem instead of memset to avoid removal by
compilers' optimizations in some cases or misbehaving versions of GCC.
Fixes ARM-software/tf-issues#408
Change-Id: Iafd9663fc1070413c3e1904e54091cf60effaa82
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Douglas Raillard
committed
on 6 Feb 2017
|
2016-12-20 |
Merge pull request #791 from jeenu-arm/asm-assert-32
...
AArch32: Print ASM_ASSERT and panic messages
danh-arm
authored
on 20 Dec 2016
GitHub
committed
on 20 Dec 2016
|
Export is_mem_free() function
...
The is_mem_free() function used to be local to bl_common.c.
This patch exports it so that it can be used outside of bl_common.c.
Change-Id: I01dcb4229f3a36f56a4724b567c5e6c416dc5e98
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Sandrine Bailleux
authored
on 8 Nov 2016
Dan Handley
committed
on 20 Dec 2016
|
2016-12-19 |
AArch32: Print ASM_ASSERT and panic messages
...
ASM_ASSERT failure and panic messages are suppressed at present. This
patch enables printing the PC location for panic messages, and file name
and line number upon assembly assert failure.
Change-Id: I80cb715988e7ce766f64da1e1d7065a74a096a0c
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Jeenu Viswambharan
committed
on 19 Dec 2016
|
2016-12-12 |
Merge pull request #774 from jeenu-arm/no-return-macro
...
Define and use no_ret macro where no return is expected
danh-arm
authored
on 12 Dec 2016
GitHub
committed
on 12 Dec 2016
|
2016-12-05 |
Define and use no_ret macro where no return is expected
...
There are many instances in ARM Trusted Firmware where control is
transferred to functions from which return isn't expected. Such jumps
are made using 'bl' instruction to provide the callee with the location
from which it was jumped to. Additionally, debuggers infer the caller by
examining where 'lr' register points to. If a 'bl' of the nature
described above falls at the end of an assembly function, 'lr' will be
left pointing to a location outside of the function range. This misleads
the debugger back trace.
This patch defines a 'no_ret' macro to be used when jumping to functions
from which return isn't expected. The macro ensures to use 'bl'
instruction for the jump, and also, for debug builds, places a 'nop'
instruction immediately thereafter (unless instructed otherwise) so as
to leave 'lr' pointing within the function range.
Change-Id: Ib34c69fc09197cfd57bc06e147cc8252910e01b0
Co-authored-by: Douglas Raillard <douglas.raillard@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Jeenu Viswambharan
committed
on 5 Dec 2016
|
2016-11-29 |
Optimize cache flush when authenticating images
...
When loading and authenticating an image, all parent images must also
be authenticated. The parent images are just certificates that don't
need to be used by any other CPU except the one loading the image, and
so there is no need to flush the cache of memory regions where they
are loaded.
Change-Id: Ice8d6979d1c02eabf1a543281ae1a07d098e4a99
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 29 Nov 2016
|
2016-09-21 |
AArch32: Common changes needed for BL1/BL2
...
This patch adds common changes to support AArch32 state in
BL1 and BL2. Following are the changes:
* Added functions for disabling MMU from Secure state.
* Added AArch32 specific SMC function.
* Added semihosting support.
* Added reporting of unhandled exceptions.
* Added uniprocessor stack support.
* Added `el3_entrypoint_common` macro that can be
shared by BL1 and BL32 (SP_MIN) BL stages. The
`el3_entrypoint_common` is similar to the AArch64
counterpart with the main difference in the assembly
instructions and the registers that are relevant to
AArch32 execution state.
* Enabled `LOAD_IMAGE_V2` flag in Makefile for
`ARCH=aarch32` and added check to make sure that
platform has not overridden to disable it.
Change-Id: I33c6d8dfefb2e5d142fdfd06a0f4a7332962e1a3
Yatharth Kochar
committed
on 21 Sep 2016
|