Merge pull request #1874 from hadi-asyrafi/qspi_boot ...

intel: QSPI boot enablement

Merge pull request #1873 from hadi-asyrafi/driver_qspi ...

intel: Add driver for QSPI

intel: QSPI boot enablement ...

Manages QSPI initialization, configuration and IO handling as boot device

Signed-off-by: Muhammad Hadi Asyrafi Abdul Halim <muhammad.hadi.asyrafi.abdul.halim@intel.com>

intel: Add driver for QSPI ...

To support the enablement of QSPI booting

Signed-off-by: Muhammad Hadi Asyrafi Abdul Halim <muhammad.hadi.asyrafi.abdul.halim@intel.com>

plat/arm: mhu: make mhu driver generic ...

MHU doorbell driver requires arm platform specific
macro "PLAT_CSS_MHU_BASE".
Rename it to "PLAT_MHUV2_BASE", so that platforms other than arm
can use generic MHU doorbell driver.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>

plat/synquacer: enable SCMI support ...

Enable the SCMI protocol support in SynQuacer platform.
Aside from power domain, system power and apcore management protocol,
this commit adds the vendor specific protocol(0x80).
This vendor specific protocol is used to get the dram mapping information
from SCP.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>

allwinner: regulators: pick correct DT subnode ...

So far the DT node describing the AXP803 PMIC used in many Allwinner A64
boards had only one subnode, so our code just entering the first subnode
to find all regulators worked fine.

However recent DT updates in the Linux kernel add more subnodes *before*
that, so we need to make sure to explicitly enter the "regulators"
subnode to find the information we are after.

Improve some DT node parsing error handling on the way.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>

zynqmp: pm: Add support for setting PMU configuration object ...

Allow EL2 (e.g. U-Boot) to load the configuration object at runtime
into the Xilinx ZynqMP PMU firmware. This allows booting with U-Boot
and U-Boot SPL with PMU FW without hard-coding the configuration
object.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>

Merge pull request #1863 from thloh85-intel/mmc_fixes ...

drivers: mmc: Fix some issues with MMC stack

plat: intel: Add MMC OCR voltage information for initialization ...

MMC stack needs OCR voltage information for the platform to initialize
MMC controller correctly.

Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>

Merge pull request #1864 from hadi-asyrafi/mailbox_fix ...

intel: Mailbox service un-accessible

Merge pull request #1862 from thloh85-intel/s10_bl2 ...

plat: intel: Improve ECC scrubbing performance

stm32mp1: zeromem device_info struct ...

The change of the structure highlighted the fact that all fields are not
correctly initialized with zeroes.

Replace the other memset in the function with zeromem, as it is faster.

Change-Id: I27f45a64e34637f79fa519f486bf5936721ef396
Signed-off-by: Yann Gautier <yann.gautier@st.com>

intel: Mailbox service un-accessible ...

Change map region for device 2 from non-secure to secure

Signed-off-by: Muhammad Hadi Asyrafi Abdul Halim <muhammad.hadi.asyrafi.abdul.halim@intel.com>

plat: intel: Improve ECC scrubbing performance ...

We should be using zeromem to scrub memory instead of memset. This would
improve the performance by 200x

Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>

Merge pull request #1847 from jts-arm/mbedtls ...

Remove Mbed TLS dependency from plat_bl_common.c

Merge pull request #1853 from vwadekar/dummy_io_storage ...

Tegra: dummy support for the io_storage backend

rcar_gen3: Add M3-W 3.0 support ...

Add support for the M3W 3.0 SoC and synchronize the upstream ATF with
Renesas downstream ATF release v2.0.1.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Merge pull request #1844 from chandnich/rename_sgiclark ...

css/sgi: replace all uses of Clark with new product names

Merge pull request #1837 from spencercw/master ...

imx: Configure CAAM job rings master ID for i.MX8MQ

Tegra: dummy support for the io_storage backend ...

This patch provides dummy macros and platform files to compile
the io_storage driver backend. This patch is necessary to
remove the "--unresolved=el3_panic" linker flag from Tegra's
makefiles and allow us to revert this workaround, previously
suggested by the ARM toolchain team.

The "--unresolved=el3_panic" flag actually was a big hammer that
allowed Tegra platforms to work with armlink previously but it
masks legit errors with the code as well.

Change-Id: I0421d35657823215229f84231896b84167f90548
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Merge pull request #1815 from Anson-Huang/gic ...

gic: make sure ProcessorSleep bit clear successfully

Merge pull request #1751 from vwadekar/tegra-scatter-file-support ...

Tegra scatter file support

Merge pull request #1845 from ambroise-arm/av/errata ...

Apply workarounds for errata of Cortex-A53, A55 and A57

imx: make sure GIC redistributor is awake before initialization ...

GICR_WAKER.ProcessorSleep can only be set to zero when:
— GICR_WAKER.Sleep bit[0] == 0.
— GICR_WAKER.Quiescent bit[31] == 0.

On some platforms, when system reboot with GIC in sleep
mode but with power ON, such as on NXP's i.MX8QM, Linux
kernel enters suspend but could be requested to reboot,
and GIC is in sleep mode and it is inside a power domain
which is ON in this scenario, when CPU reset, the GIC
driver trys to set CORE's redistributor interface to awake,
with GICR_WAKER.Sleep bit[0] and GICR_WAKER.Quiescent bit[31]
both set, the ProcessorSleep bit[1] will never be clear
and cause system hang.

This patch makes sure GICR_WAKER.Sleep bit[0] and
GICR_WAKER.Quiescent bit[31] are both zeor before clearing
ProcessorSleep bit[1].

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Remove Mbed TLS dependency from plat_bl_common.c ...

Due to the shared Mbed TLS heap optimisation introduced in 6d01a463,
common code files were depending on Mbed TLS specific headers. This
dependency is now removed by moving the default, unoptimised heap
implementation inside the Mbed TLS specific files.

Change-Id: I11ea3eb4474f0d9b6cb79a2afd73a51a4a9b8994
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

Minor changes to documentation and comments ...

Fix some typos and clarify some sentences.

Change-Id: Id276d1ced9a991b4eddc5c47ad9a825e6b29ef74
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

juno: Enable CPU errata workarounds ...

Change-Id: I7593f5ed89b9ef13b510e2259c909838c64ec56c
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

css/sgi: replace all uses of Clark with new product names ...

Replace all uses of 'SGI_CLARK' with 'RD_N1E1_EDGE' and
'SGI_CLARK_HELIOS' with 'RD_E1_EDGE' as per the updated product
names

Change-Id: Ib8136e421b1a46da1e5df58c6b1432d5c78d279b
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

Tegra: Support for scatterfile for the BL31 image ...

This patch provides support for using the scatterfile format as
the linker script with the 'armlink' linker for Tegra platforms.

In order to enable the scatterfile usage the following changes
have been made:

* provide mapping for ld.S symbols in bl_common.h
* include bl_common.h from all the affected files
* update the makefile rules to use the scatterfile and armlink
  to compile BL31
* update pubsub.h to add sections to the scatterfile

NOTE: THIS CHANGE HAS BEEN VERIFIED WITH TEGRA PLATFORMS ONLY.

Change-Id: I7bb78b991c97d74a842e5635c74cb0b18e0fce67
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>