Add support for the M3W 3.0 SoC and synchronize the upstream ATF with
Renesas downstream ATF release v2.0.1.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Add code to determine the platform timer frequency and configure
the generic timer accordingly early in BL2.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Disable the IPMMU PV0 cache on E3 rev. 1.x .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Add support for R-Car E3 silicon rev. 1.1

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Add missing TARGET_NAME for the case where RCAR_LSI is set to AUTO,
which is platform auto-detection.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Rename BL2_LIMIT to BL2_IMAGE_LIMIT and BL2_SYSRAM_LIMIT to BL2_LIMIT to
correctly set BL2_LIMIT value. Set correct DEVICE_SRAM_BASE to match the
hardware. Use BL2_END in rcar_configure_mmu_el3() to mark the cacheable
BL2 area.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Replace foo_t with struct foo.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Generate a /reserved-memory node for FCNL in the DT passed to
subsequent stages, so they will know how the FCNL is configured.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Generate /compatible string for the platform, so that the subsequent
stages know which platform they are running on. This could be useful
when ie. building U-Boot that contains DTs for multiple platforms and
can thus decide on which platform it is running. This would ultimately
allow single bootloader binary for all Gen3 platforms.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Pass DTB containing DRAM layout from BL2 to BL33 via register x3, so
that the BL33 can simply consume it and get accurate DRAM layout info.
BL33 is in most usecases U-Boot.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Use array of start-size tuples for the DRAM banks and call single
function which iterates over this array to report the DRAM info.
This is in preparation for expanding this to generate FDT for the
next stage.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Print the DRAM configuration only after the DRAM was initialized. This
will be useful when deduplicating code populating FDT passed to U-Boot,
since it will contain the same macros as bl2_advertise_dram_size().

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Make the DRAM configuration debug print consistent for all supported SoCs.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

There is nothing preventing H3 older than v3.0 from printing the
DRAM configuration, just like v3.0 and newer. Drop the check and
let all H3 revisions print DRAM configuration in BL2.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

RCAR_DRAM_DDR3L_MEMCONF = 2 means E3 with 1GBx4 memory configuration.
Add debug print for this configuration for completeness sake.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Just move the DRAM layout information into separate function,
no functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Reference code:
==============

rar_gen3: IPL and Secure Monitor Rev1.0.22
https://github.com/renesas-rcar/arm-trusted-firmware [rcar_gen3]

Author: Takuya Sakata <takuya.sakata.wz@bp.renesas.com>
Date:   Thu Aug 30 21:26:41 2018 +0900
	Update IPL and Secure Monitor Rev1.0.22

General Information:
===================

This port has been tested on the Salvator-X Soc_id r8a7795 revision
ES1.1 (uses an SPD).

Build Tested:
-------------
ATFW_OPT="LSI=H3 RCAR_DRAM_SPLIT=1 RCAR_LOSSY_ENABLE=1"
MBEDTLS_DIR=$mbedtls

$ make clean bl2 bl31 rcar PLAT=rcar ${ATFW_OPT} SPD=opteed

Other dependencies:
------------------
* mbed_tls:
  git@github.com:ARMmbed/mbedtls.git [devel]

  Merge: 68dbc94 f34a4c1
  Author: Simon Butcher <simon.butcher@arm.com>
  Date:   Thu Aug 30 00:57:28 2018 +0100

* optee_os:
  https://github.com/BayLibre/optee_os

  Until it gets merged into OP-TEE, the port requires Renesas' Trusted
  Environment with a modification to support power management.

  Author: Jorge Ramirez-Ortiz <jramirez@baylibre.com>
  Date:   Thu Aug 30 16:49:49 2018 +0200
    plat-rcar: cpu-suspend: handle the power level
    Signed-off-by: Jorge Ramirez-Ortiz <jramirez@baylibre.com>

* u-boot:
  The port has beent tested using mainline uboot.

  Author: Fabio Estevam <festevam@gmail.com>
  Date:   Tue Sep 4 10:23:12 2018 -0300

*linux:
  The port has beent tested using mainline kernel.

  Author: Linus Torvalds <torvalds@linux-foundation.org>
  Date:   Sun Sep 16 11:52:37 2018 -0700
      Linux 4.19-rc4

Overview
---------

BOOTROM starts the cpu at EL3; In this port BL2 will therefore be entered
at this exception level (the Renesas' ATF reference tree [1] resets into
EL1 before entering BL2 - see its bl2.ld.S)

BL2 initializes DDR (and i2c to talk to the PMIC on some platforms)
before determining the boot reason (cold or warm).

During suspend all CPUs are switched off and the DDR is put in
backup mode (some kind of self-refresh mode). This means that BL2 is
always entered in a cold boot scenario.

Once BL2 boots, it determines the boot reason, writes it to shared
memory (BOOT_KIND_BASE) together with the BL31 parameters
(PARAMS_BASE) and jumps to BL31.

To all effects, BL31 is as if it is being entered in reset mode since
it still needs to initialize the rest of the cores; this is the reason
behind using direct shared memory access to  BOOT_KIND_BASE and
PARAMS_BASE instead of using registers to get to those locations (see
el3_common_macros.S and bl31_entrypoint.S for the RESET_TO_BL31 use
case).

Depending on the boot reason BL31 initializes the rest of the cores:
in case of suspend, it uses a MBOX memory region to recover the
program counters.

[1] https://github.com/renesas-rcar/arm-trusted-firmware
Tests
-----

* cpuidle
  -------
   enable kernel's cpuidle arm_idle driver and boot

* system suspend
  --------------
  $ cat suspend.sh
    #!/bin/bash
    i2cset -f -y 7 0x30 0x20 0x0F
    read -p "Switch off SW23 and press return " foo
    echo mem > /sys/power/state

* cpu hotplug:
  ------------
  $ cat offline.sh
    #!/bin/bash
    nbr=$1
    echo 0 > /sys/devices/system/cpu/cpu$nbr/online
    printf "ONLINE:  " && cat /sys/devices/system/cpu/online
    printf "OFFLINE: " && cat /sys/devices/system/cpu/offline

  $ cat online.sh
    #!/bin/bash
    nbr=$1
    echo 1 > /sys/devices/system/cpu/cpu$nbr/online
    printf "ONLINE:  " && cat /sys/devices/system/cpu/online
    printf "OFFLINE: " && cat /sys/devices/system/cpu/offline

Signed-off-by: ldts <jramirez@baylibre.com>