tools: Add firmware authenticated encryption tool ...

Add firmware authenticated encryption tool which utilizes OpenSSL
library to encrypt firmwares using a key provided via cmdline. Currently
this tool supports AES-GCM as an authenticated encryption algorithm.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I60e296af1b98f1912a19d5f91066be7ea85836e4

drivers: crypto: Add authenticated decryption framework ...

Add framework for autheticated decryption of data. Currently this
patch optionally imports mbedtls library as a backend if build option
"DECRYPTION_SUPPORT = aes_gcm" is set to perform authenticated decryption
using AES-GCM algorithm.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I2966f0e79033151012bf4ffc66f484cd949e7271

SPMD: add command line parameter to run SPM at S-EL2 or S-EL1 ...

Added SPMD_SPM_AT_SEL2 build command line parameter.
Set to 1 to run SPM at S-EL2.
Set to 0 to run SPM at S-EL1 (pre-v8.4 or S-EL2 is disabled).
Removed runtime EL from SPM core manifest.

Change-Id: Icb4f5ea4c800f266880db1d410d63fe27a1171c0
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

SPMD: save/restore EL2 system registers. ...

NOTE: Not all EL-2 system registers are saved/restored.
This subset includes registers recognized by ARMv8.0

Change-Id: I9993c7d78d8f5f8e72d1c6c8d6fd871283aa3ce0
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

Merge "tools: Small improvement to print_memory_map script" into integration

Merge "Read-only xlat tables for BL31 memory" into integration

Read-only xlat tables for BL31 memory ...

This patch introduces a build flag which allows the xlat tables
to be mapped in a read-only region within BL31 memory. It makes it
much harder for someone who has acquired the ability to write to
arbitrary secure memory addresses to gain control of the
translation tables.

The memory attributes of the descriptors describing the tables
themselves are changed to read-only secure data. This change
happens at the end of BL31 runtime setup. Until this point, the
tables have read-write permissions. This gives a window of
opportunity for changes to be made to the tables with the MMU on
(e.g. reclaiming init code). No changes can be made to the tables
with the MMU turned on from this point onwards. This change is also
enabled for sp_min and tspd.

To make all this possible, the base table was moved to .rodata. The
penalty we pay is that now .rodata must be aligned to the size of
the base table (512B alignment). Still, this is better than putting
the base table with the higher level tables in the xlat_table
section, as that would cost us a full 4KB page.

Changing the tables from read-write to read-only cannot be done with
the MMU on, as the break-before-make sequence would invalidate the
descriptor which resolves the level 3 page table where that very
descriptor is located. This would make the translation required for
writing the changes impossible, generating an MMU fault.

The caches are also flushed.

Signed-off-by: Petre-Ionut Tudor <petre-ionut.tudor@arm.com>
Change-Id: Ibe5de307e6dc94c67d6186139ac3973516430466

SPMD: generate and add Secure Partition blobs into FIP ...

Till now TF-A allows limited number of external images to be made part
of FIP. With SPM coming along, there may exist multiple SP packages
which need to be inserted into FIP. To achieve this we need a more
scalable approach to feed SP packages to FIP.

This patch introduces changes in build system to generate and add SP
packages into FIP based on information provided by platform.
Platform provides information in form of JSON which contains layout
description of available Secure Partitions.
JSON parser script is invoked by build system early on and generates
a makefile which updates FIP, SPTOOL and FDT arguments which will be
used by build system later on for final packaging.

"SP_LAYOUT_FILE" passed as a build argument and can be outside of TF-A
tree. This option will be used only when SPD=spmd.

For each SP, generated makefile will have following entries
     - FDT_SOURCES	+=	sp1.dts
     - SPTOOL_ARGS	+= 	-i sp1.img:sp1.dtb -o sp1.pkg
     - FIP_ARGS		+=	--blob uuid=XXXX-XXX...,file=SP1.pkg

Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib6a9c064400caa3cd825d9886008a3af67741af7

tools: Small improvement to print_memory_map script ...

This patch:
- Add the __COHERENT_RAM_START__ and __COHERENT_RAM_END__ symbols.
- Improve how the symbols are found with a regex.
- Add a build option to revert the memory layout output.

Change-Id: I54ec660261431bc98d78acb0f80e3d95bc5397ac
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Fix clang build if CC is not in the path. ...

If CC points to clang the linker was set to ld.lld. Copy the diectory
name from CC is it has one.

Change-Id: I50aef5dddee4d2540b12b6d4e68068ad004446f7
Signed-off-by: Arve Hjønnevåg <arve@android.com>

Merge changes from topic "lm/fconf" into integration ...

* changes:
  arm-io: Panic in case of io setup failure
  MISRA fix: Use boolean essential type
  fconf: Add documentation
  fconf: Move platform io policies into fconf
  fconf: Add mbedtls shared heap as property
  fconf: Add TBBR disable_authentication property
  fconf: Add dynamic config DTBs info as property
  fconf: Populate properties from dtb during bl2 setup
  fconf: Load config dtb from bl1
  fconf: initial commit

SPMD: enable SPM dispatcher support ...

This patch adds support to the build system to include support for the SPM
dispatcher when the SPD configuration option is spmd.

Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Change-Id: Ic1ae50ecd7403fcbcf1d318abdbd6ebdc642f732

fconf: Move platform io policies into fconf ...

Use the firmware configuration framework to store the io_policies
information inside the configuration device tree instead of the static
structure in the code base.

The io_policies required by BL1 can't be inside the dtb, as this one is
loaded by BL1, and only available at BL2.

This change currently only applies to FVP platform.

Change-Id: Ic9c1ac3931a4a136aa36f7f58f66d3764c1bfca1
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Merge "Add support for documentation build as a target in Makefile" into integration

Merge changes from topic "sb/select-cot" into integration ...

* changes:
  Introduce COT build option
  cert_create: Remove references to TBBR in common code
  cert_create: Introduce COT build option
  cert_create: Introduce TBBR CoT makefile

Introduce COT build option ...

Allows to select the chain of trust to use when the Trusted Boot feature
is enabled. This affects both the cert_create tool and the firmware
itself.

Right now, the only available CoT is TBBR.

Change-Id: I7ab54e66508a1416cb3fcd3dfb0f055696763b3d
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Add support for documentation build as a target in Makefile ...

Command to build HTML-formatted pages from docs:
make doc

Change-Id: I4103c804b3564fe67d8fc5a3373679daabf3f2e9
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

Merge "Enable -Wredundant-decls warning check" into integration

Enable -Wredundant-decls warning check ...

This flag warns if anything is declared more than once in the same
scope, even in cases where multiple declaration is valid and changes
nothing.

Consequently, this patch also fixes the issues reported by this
flag. Consider the following two lines of code from two different source
files(bl_common.h and bl31_plat_setup.c):

IMPORT_SYM(uintptr_t, __RO_START__, BL_CODE_BASE);
IMPORT_SYM(unsigned long, __RO_START__, BL2_RO_BASE);

The IMPORT_SYM macro which actually imports a linker symbol as a C expression.
The macro defines the __RO_START__ as an extern variable twice, one for each
instance. __RO_START__ symbol is defined by the linker script to mark the start
of the Read-Only area of the memory map.

Essentially, the platform code redefines the linker symbol with a different
(relevant) name rather than using the standard symbol. A simple solution to
fix this issue in the platform code for redundant declarations warning is
to remove the second IMPORT_SYM and replace it with following assignment

static const unsigned long BL2_RO_BASE = BL_CODE_BASE;

Change-Id: If4835d1ee462d52b75e5afd2a59b64828707c5aa
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

Measured Boot: add function for hash calculation ...

This patch adds 'calc_hash' function using Mbed TLS library
required for Measured Boot support.

Change-Id: Ifc5aee0162d04db58ec6391e0726a526f29a52bb
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

TSP: add PIE support ...

This implementation simply mimics that of BL31.

Change-Id: Ibbaa4ca012d38ac211c52b0b3e97449947160e07
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

BL2_AT_EL3: add PIE support ...

This implementation simply mimics that of BL31.

I did not implement the ENABLE_PIE support for BL2_IN_XIP_MEM=1 case.
It would make the linker script a bit uglier.

Change-Id: If3215abd99f2758dfb232e44b50320d04eba808b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

PIE: pass PIE options only to BL31 ...

docs/getting_started/build-options.rst clearly says ENABLE_PIE is
currently only supported in BL31, but in fact, it has a stronger
limitation:

  Defining ENABLE_PIE may corrupt BL1 and BL2. So, ENABLE_PIE is
  supported only for platforms where BL31 is the only image built
  in the TF-A tree.

Currently, ENABLE_PIE is enabled by two platforms,
plat/arm/common/arm_common.mk and ti/k3/common/plat_common.mk,
both of which enable ENABLE_PIE together with RESET_TO_BL31.

For platforms with the full boot sequence, ENABLE_PIE may break earlier
BL stages. For example, if I build PLAT=qemu with ENABLE_PIE=1, it
fails in BL1.

When ENABLE_PIE is enabled, PIE options are added to TF_CFLAGS and
TF_LDFLAGS, so all BL images are affected. It is problematic because
currently only the BL31 linker script handles it. Even if BL1/BL2
works, the image size would increase needlessly, at least.

Pass the PIE options only to BL images that support it.

Change-Id: I550e95148aa3c63571c8ad2081082c554a848f57
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Merge "Set lld as the default linker for Clang builds" into integration

Set lld as the default linker for Clang builds ...

The LLVM linker replaces the GNU linker as default for the link on Clang
builds. It is possible to override the default linker by setting the LD build
flag.

The patch also updates the TF-A doc.

Change-Id: Ic08552b9994d4fa8f0d4863e67a2726c1dce2e35
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>

Replace dts includes with C preprocessor syntax ...

Using the /include/ syntax, the include was evaluated by dtc, only after running
the preprocessor, therefore the .dtsi files were not preprocessed. This patch
adds the #include syntax instead. Evaluating this and preprocessing the files
now happens in a single step, done by the C preprocessor.

Change-Id: I6d0104b6274316fc736e84973502a4d6c2c9d6e0
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>

bl31: Split into two separate memory regions ...

Some platforms are extremely memory constrained and must split BL31
between multiple non-contiguous areas in SRAM. Allow the NOBITS
sections (.bss, stacks, page tables, and coherent memory) to be placed
in a separate region of RAM from the loaded firmware image.

Because the NOBITS region may be at a lower address than the rest of
BL31, __RW_{START,END}__ and __BL31_{START,END}__ cannot include this
region, or el3_entrypoint_common would attempt to invalidate the dcache
for the entire address space. New symbols __NOBITS_{START,END}__ are
added when SEPARATE_NOBITS_REGION is enabled, and the dcached for the
NOBITS region is invalidated separately.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Idedfec5e4dbee77e94f2fdd356e6ae6f4dc79d37

Merge "debugfs: add 9p device interface" into integration

spm: Remove SPM Alpha 1 prototype and support files ...

The Secure Partition Manager (SPM) prototype implementation is
being removed. This is preparatory work for putting in place a
dispatcher component that, in turn, enables partition managers
at S-EL2 / S-EL1.

This patch removes:

- The core service files (std_svc/spm)
- The Resource Descriptor headers (include/services)
- SPRT protocol support and service definitions
- SPCI protocol support and service definitions

Change-Id: Iaade6f6422eaf9a71187b1e2a4dffd7fb8766426
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>

Remove dependency between SPM_MM and ENABLE_SPM build flags ...

There are two different implementations of Secure Partition
management in TF-A. One is based on the "Management Mode" (MM)
design, the other is based on the Secure Partition Client Interface
(SPCI) specification. Currently there is a dependency between their
build flags that shouldn't exist, making further development
harder than it should be. This patch removes that
dependency, making the two flags function independently.

Before: ENABLE_SPM=1 is required for using either implementation.
        By default, the SPCI-based implementation is enabled and
        this is overridden if SPM_MM=1.

After: ENABLE_SPM=1 enables the SPCI-based implementation.
       SPM_MM=1 enables the MM-based implementation.
       The two build flags are mutually exclusive.

Note that the name of the ENABLE_SPM flag remains a bit
ambiguous - this will be improved in a subsequent patch. For this
patch the intention was to leave the name as-is so that it is
easier to track the changes that were made.

Change-Id: I8e64ee545d811c7000f27e8dc8ebb977d670608a
Signed-off-by: Paul Beesley <paul.beesley@arm.com>