2020-10-12 |
Increase type widths to satisfy width requirements
...
Usually, C has no problem up-converting types to larger bit sizes. MISRA
rule 10.7 requires that you not do this, or be very explicit about this.
This resolves the following required rule:
bl1/aarch64/bl1_context_mgmt.c:81:[MISRA C-2012 Rule 10.7 (required)]<None>
The width of the composite expression "0U | ((mode & 3U) << 2U) | 1U |
0x3c0U" (32 bits) is less that the right hand operand
"18446744073709547519ULL" (64 bits).
This also resolves MISRA defects such as:
bl2/aarch64/bl2arch_setup.c:18:[MISRA C-2012 Rule 12.2 (required)]
In the expression "3U << 20", shifting more than 7 bits, the number
of bits in the essential type of the left expression, "3U", is
not allowed.
Further, MISRA requires that all shifts don't overflow. The definition of
PAGE_SIZE was (1U << 12), and 1U is 8 bits. This caused about 50 issues.
This fixes the violation by changing the definition to 1UL << 12. Since
this uses 32bits, it should not create any issues for aarch32.
This patch also contains a fix for a build failure in the sun50i_a64
platform. Specifically, these misra fixes removed a single and
instruction,
92407e73 and x19, x19, #0xffffffff
from the cm_setup_context function caused a relocation in
psci_cpus_on_start to require a linker-generated stub. This increased the
size of the .text section and caused an alignment later on to go over a
page boundary and round up to the end of RAM before placing the .data
section. This sectionn is of non-zero size and therefore causes a link
error.
The fix included in this reorders the functions during link time
without changing their ording with respect to alignment.
Change-Id: I76b4b662c3d262296728a8b9aab7a33b02087f16
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Jimmy Brisson
authored
on 4 Aug 2020
laurenw-arm
committed
on 12 Oct 2020
|
2020-06-02 |
xlat_tables_v2: add base table section name parameter for spm_mm
...
Core spm_mm code expects the translation tables are located in the
inner & outer WBWA & shareable memory.
REGISTER_XLAT_CONTEXT2 macro is used to specify the translation
table section in spm_mm.
In the commit 363830df1c28e (xlat_tables_v2: merge
REGISTER_XLAT_CONTEXT_{FULL_SPEC,RO_BASE_TABLE}), REGISTER_XLAT_CONTEXT2
macro explicitly specifies the base xlat table goes into .bss by default.
This change affects the existing SynQuacer spm_mm implementation.
plat/socionext/synquacer/include/plat.ld.S linker script intends to
locate ".bss.sp_base_xlat_table" into "sp_xlat_table" section,
but this implementation is no longer available.
This patch adds the base table section name parameter for
REGISTER_XLAT_CONTEXT2 so that platform can specify the
inner & outer WBWA & shareable memory for spm_mm base xlat table.
If PLAT_SP_IMAGE_BASE_XLAT_SECTION_NAME is not defined, base xlat table
goes into .bss by default, the result is same as before.
Change-Id: Ie0e1a235e5bd4288dc376f582d6c44c5df6d31b2
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Masahisa Kojima
committed
on 2 Jun 2020
|
2020-04-03 |
xlat lib v2: Add support to pass shareability attribute for normal memory region
...
Present framework restricts platform to pass desired shareability attribute
for normal memory region mapped in MMU. it defaults to inner shareability.
There are platforms where memories (like SRAM) are not placed at snoopable
region in advaned interconnect like CCN/CMN hence snoopable transaction is
not possible to these memory. Though These memories could be mapped in MMU
as MT_NON_CACHEABLE, data caches benefits won't be available.
If these memories are mapped as cacheable with non-shareable attribute,
when only one core is running like at boot time, MMU data cached could be
used for faster execution. Hence adding support to pass the shareability
attribute for memory regions.
Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Change-Id: I678cb50120a28dae4aa9d1896e8faf1dd5cf1754
Pramod Kumar
committed
on 3 Apr 2020
|
2020-04-02 |
xlat_tables_v2: fix assembler warning of PLAT_RO_XLAT_TABLES
...
If PLAT_RO_XLAT_TABLES is defined, the base xlat table goes to the
.rodata section instead of .bss section.
This causes a warning like:
/tmp/ccswitLr.s: Assembler messages:
/tmp/ccswitLr.s:297: Warning: setting incorrect section attributes for .rodata
It is practically no problem, but I want to keep the build log clean.
Put the base table into the "base_xlat_table" section to suppress the
assembler warnings.
The linker script determines its final destination; rodata section if
PLAT_RO_XLAT_TABLES=1, or bss section otherwise. So, the result is the
same.
Change-Id: Ic85d1d2dddd9b5339289fc2378cbcb21dd7db02e
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 2 Apr 2020
|
2020-03-30 |
xlat_tables_v2: add enable_mmu()
...
enable_mmu_* has a different function name, so it is not handy in the
shared code. enable_mmu() calls an appropriate one depending on the
exception level.
Change-Id: I0657968bfcb91c32733f75f9259f550a5c35b1c3
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 30 Mar 2020
|
2020-03-10 |
xlat_tables_v2: use ARRAY_SIZE in REGISTER_XLAT_CONTEXT_FULL_SPEC
...
With this, it is clearer that .base_table_entries and .tables_num
are the array size of .base_table and .tables, respectively.
Change-Id: I634e65aba835ab9908cc3919355df6bc6e18d42a
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 10 Mar 2020
|
xlat_tables_v2: merge REGISTER_XLAT_CONTEXT_{FULL_SPEC,RO_BASE_TABLE}
...
xlat_tables_v2_helpers.h defines two quite similar macros,
REGISTER_XLAT_CONTEXT_FULL_SPEC and REGISTER_XLAT_CONTEXT_RO_BASE_TABLE.
Only the difference is the section of _ctx_name##_base_xlat_table.
Parameterize it and unify these two macros.
The base xlat table goes into the .bss section by default.
If PLAT_RO_XLAT_TABLES is defined, it goes into the .rodata section.
Change-Id: I8b02f4da98f0c272e348a200cebd89f479099c55
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 10 Mar 2020
|
2020-02-24 |
Read-only xlat tables for BL31 memory
...
This patch introduces a build flag which allows the xlat tables
to be mapped in a read-only region within BL31 memory. It makes it
much harder for someone who has acquired the ability to write to
arbitrary secure memory addresses to gain control of the
translation tables.
The memory attributes of the descriptors describing the tables
themselves are changed to read-only secure data. This change
happens at the end of BL31 runtime setup. Until this point, the
tables have read-write permissions. This gives a window of
opportunity for changes to be made to the tables with the MMU on
(e.g. reclaiming init code). No changes can be made to the tables
with the MMU turned on from this point onwards. This change is also
enabled for sp_min and tspd.
To make all this possible, the base table was moved to .rodata. The
penalty we pay is that now .rodata must be aligned to the size of
the base table (512B alignment). Still, this is better than putting
the base table with the higher level tables in the xlat_table
section, as that would cost us a full 4KB page.
Changing the tables from read-write to read-only cannot be done with
the MMU on, as the break-before-make sequence would invalidate the
descriptor which resolves the level 3 page table where that very
descriptor is located. This would make the translation required for
writing the changes impossible, generating an MMU fault.
The caches are also flushed.
Signed-off-by: Petre-Ionut Tudor <petre-ionut.tudor@arm.com>
Change-Id: Ibe5de307e6dc94c67d6186139ac3973516430466
Petre-Ionut Tudor
committed
on 24 Feb 2020
|
2019-08-01 |
Switch AARCH32/AARCH64 to __aarch64__
...
NOTE: AARCH32/AARCH64 macros are now deprecated in favor of __aarch64__.
All common C compilers pre-define the same macros to signal which
architecture the code is being compiled for: __arm__ for AArch32 (or
earlier versions) and __aarch64__ for AArch64. There's no need for TF-A
to define its own custom macros for this. In order to unify code with
the export headers (which use __aarch64__ to avoid another dependency),
let's deprecate the AARCH32 and AARCH64 macros and switch the code base
over to the pre-defined standard macro. (Since it is somewhat
unintuitive that __arm__ only means AArch32, let's standardize on only
using __aarch64__.)
Change-Id: Ic77de4b052297d77f38fc95f95f65a8ee70cf200
Signed-off-by: Julius Werner <jwerner@chromium.org>
Julius Werner
committed
on 1 Aug 2019
|
Replace __ASSEMBLY__ with compiler-builtin __ASSEMBLER__
...
NOTE: __ASSEMBLY__ macro is now deprecated in favor of __ASSEMBLER__.
All common C compilers predefine a macro called __ASSEMBLER__ when
preprocessing a .S file. There is no reason for TF-A to define it's own
__ASSEMBLY__ macro for this purpose instead. To unify code with the
export headers (which use __ASSEMBLER__ to avoid one extra dependency),
let's deprecate __ASSEMBLY__ and switch the code base over to the
predefined standard.
Change-Id: Id7d0ec8cf330195da80499c68562b65cb5ab7417
Signed-off-by: Julius Werner <jwerner@chromium.org>
Julius Werner
committed
on 1 Aug 2019
|
2019-05-24 |
Add support for Branch Target Identification
...
This patch adds the functionality needed for platforms to provide
Branch Target Identification (BTI) extension, introduced to AArch64
in Armv8.5-A by adding BTI instruction used to mark valid targets
for indirect branches. The patch sets new GP bit [50] to the stage 1
Translation Table Block and Page entries to denote guarded EL3 code
pages which will cause processor to trap instructions in protected
pages trying to perform an indirect branch to any instruction other
than BTI.
BTI feature is selected by BRANCH_PROTECTION option which supersedes
the previous ENABLE_PAUTH used for Armv8.3-A Pointer Authentication
and is disabled by default. Enabling BTI requires compiler support
and was tested with GCC versions 9.0.0, 9.0.1 and 10.0.0.
The assembly macros and helpers are modified to accommodate the BTI
instruction.
This is an experimental feature.
Note. The previous ENABLE_PAUTH build option to enable PAuth in EL3
is now made as an internal flag and BRANCH_PROTECTION flag should be
used instead to enable Pointer Authentication.
Note. USE_LIBROM=1 option is currently not supported.
Change-Id: Ifaf4438609b16647dc79468b70cd1f47a623362e
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Alexei Fedorov
committed
on 24 May 2019
|
2019-02-19 |
ARMv7: support non-LPAE mapping (not xlat_v2)
...
Support 32bit descriptor MMU table. This is required by ARMv7
architectures that do not support the Large Page Address Extensions.
nonlpae_tables.c source file is dumped from the OP-TEE project:
core_mmu_armv7.c and related header files.
Change-Id: If912d66c374290c49c5a1211ce4c5c27b2d7dc60
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Usama Arif <usama.arif@arm.com>
Etienne Carriere
authored
on 24 Oct 2017
Usama Arif
committed
on 19 Feb 2019
|
2019-01-30 |
lib/xlat_tables: Add support for ARMv8.4-TTST
...
ARMv8.4-TTST (Small Translation tables) relaxes the lower limit on the
size of translation tables by increasing the maximum permitted value
of the T1SZ and T0SZ fields in TCR_EL1, TCR_EL2, TCR_EL3, VTCR_EL2 and
VSTCR_EL2.
This feature is supported in AArch64 state only.
This patch adds support for this feature to both versions of the
translation tables library. It also removes the static build time
checks for virtual address space size checks to runtime assertions.
Change-Id: I4e8cebc197ec1c2092dc7d307486616786e6c093
Signed-off-by: Sathees Balya <sathees.balya@arm.com>
Sathees Balya
committed
on 30 Jan 2019
|
2019-01-04 |
Sanitise includes across codebase
...
Enforce full include path for includes. Deprecate old paths.
The following folders inside include/lib have been left unchanged:
- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}
The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).
For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").
This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.
Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.
Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 4 Jan 2019
|
2018-12-11 |
SPM: Support multiple xlat tables contexts
...
Change-Id: Ib7c2529b85bb5930d44907edfc8ead13d3b1ef4d
Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 11 Dec 2018
|
2018-11-22 |
xlat v2: Support mapping regions with allocated VA
...
Provide new APIs to add new regions without specifying the base VA.
- `mmap_add_region_alloc_va` adds a static region to mmap choosing as
base VA the first possible address after all the currently mapped
regions. It is aligned to an appropriate boundary in relation to the
size and base PA of the requested region. No attempt is made to fill
any unused VA holes.
- `mmap_add_dynamic_region_alloc_va` it adds a region the same way as
`mmap_add_region_alloc_va` does, but it's dynamic instead of static.
- `mmap_add_alloc_va` takes an array of non const `mmap_region_t`,
maps them in the same way as `mmap_add_region_alloc_va` and fills
their `base_va` field. A helper macro has been created to help create
the array, called `MAP_REGION_ALLOC_VA`.
Change-Id: I5ef3f82ca0dfd0013d2e8034aa22f13ca528ba37
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 22 Nov 2018
|
2018-11-08 |
Standardise header guards across codebase
...
All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.
The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.
The exceptions are files that are imported from other projects:
- CryptoCell driver
- dt-bindings folders
- zlib headers
Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 8 Nov 2018
|
2018-10-26 |
xlat: Fix compatibility between v1 and v2
...
There are several platforms using arm_setup_page_tables(), which is
supposed to be Arm platform only. This creates several dependency
problems between platforms.
This patch adds the definition XLAT_TABLES_LIB_V2 to the xlat tables lib
v2 makefile. This way it is possible to detect from C code which version
is being used and include the correct header.
The file arm_xlat_tables.h has been renamed to xlat_tables_compat.h and
moved to a common folder. This way, when in doubt, this header can be
used to guarantee compatibility, as it includes the correct header based
on XLAT_TABLES_LIB_V2.
This patch also removes the usage of ARM_XLAT_TABLES_V1 from QEMU (so
that is now locked in xlat lib v2) and ZynqMP (where it was added as a
workaround).
Change-Id: Ie1e22a23b44c549603d1402a237a70d0120d3e04
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 26 Oct 2018
|
2018-09-28 |
xlat: Remove deprecated interfaces
...
Change-Id: I83de2ae3e0795e6fec3c1e5b37c441b64b0c9cb6
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 28 Sep 2018
|
2018-08-22 |
libc: Fix all includes in codebase
...
The codebase was using non-standard headers. It is needed to replace
them by the correct ones so that we can use the new libc headers.
Change-Id: I530f71d9510cb036e69fe79823c8230afe890b9d
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 22 Aug 2018
|
2018-08-10 |
xlat v2: Support the EL2 translation regime
...
The translation library is useful elsewhere. Even though this repository
doesn't exercise the EL2 support of the library, it is better to have it
here as well to make it easier to maintain.
enable_mmu_secure() and enable_mmu_direct() have been deprecated. The
functions are still present, but they are behind ERROR_DEPRECATED and
they call the new functions enable_mmu_svc_mon() and
enable_mmu_direct_svc_mon().
Change-Id: I13ad10cd048d9cc2d55e0fff9a5133671b67dcba
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 10 Aug 2018
|
2018-08-06 |
xlat v2: Cleanup get/change mem attr helpers
...
Changed the names for consistency with the rest of the library. Introduced
new helpers that manipulate the active translation tables context.
Change-Id: Icaca56b67fcf6a96e88aa3c7e47411162e8e6856
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 6 Aug 2018
|
2018-08-02 |
xlat: Use bool instead of int
...
Change-Id: I35d5b6a7c219f6f38983b30f157c1ed3808af17f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 2 Aug 2018
|
2018-07-30 |
xlat: Fix MISRA defects
...
Fix defects of MISRA C-2012 rules 8.13, 10.1, 10.3, 10.4, 10.8, 11.6,
14.4, 15.7, 17.8, 20.10, 20.12, 21.1 and Directive 4.9.
Change-Id: I7ff61e71733908596dbafe2e99d99b4fce9765bd
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 30 Jul 2018
|
2018-07-15 |
xlat: Remove references to the Trusted Firmware
...
This library can be used in other projects. All comments that talk about
the Trusted Firmware should be talking about the library itself.
Change-Id: I3b98d42f7132be72c1f8a4900acfaa78dbd2daa2
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 15 Jul 2018
|
xlat v2: Make setup_mmu_config public
...
This allows other parts of the code to reuse it. No functional changes.
Change-Id: Ib052ae235c422d9179958bd3016c3e678779ae9b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 15 Jul 2018
|
2018-07-13 |
xlat v2: Turn MMU parameters into 64-bit values
...
Most registers are 64-bit wide, even in AArch32 mode:
- MAIR_ELx is equivalent to MAIR0 and MAIR1.
- TTBR is 64 bit in both AArch64 and AArch32.
The only difference is the TCR register, which is 32 bit in AArch32 and
in EL3 in AArch64. For consistency with the rest of ELs in AArch64, it
makes sense to also have it as a 64-bit value.
Change-Id: I2274d66a28876702e7085df5f8aad0e7ec139da9
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 13 Jul 2018
|
xlat v2: Remove IMAGE_EL define
...
The Exception Level is now detected at runtime. This means that it is not
needed to hardcode the EL used by each image.
This doesn't result in a substantial increase of the image size because
the initialization functions that aren't used are garbage-collected by
the linker.
In AArch32 the current EL has been changed from EL3 to EL1 because the
the AArch32 PL1&0 translation regime behaves more like the AArch64 EL1&0
translation regime than the EL3 one.
Change-Id: I941404299ebe7666ca17619207c923b49a55cb73
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 13 Jul 2018
|
2018-07-03 |
xlat v2: Split code into separate files
...
Instead of having one big file with all the code, it's better to have
a few smaller files that are more manageable:
- xlat_tables_core.c: Code related to the core functionality of the
library (map and unmap regions, initialize xlat context).
- xlat_tables_context.c: Instantiation of the active image context
as well as APIs to manipulate it.
- xlat_tables_utils.c: Helper code that isn't part of the core
functionality (change attributes, debug print messages).
Change-Id: I3ea956fc1afd7473c0bb5e7c6aab3b2e5d88c711
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 3 Jul 2018
|
2018-06-27 |
xlat v2: Split MMU setup and enable
...
At present, the function provided by the translation library to enable
MMU constructs appropriate values for translation library, and programs
them to the right registers. The construction of initial values,
however, is only required once as both the primary and secondaries
program the same values.
Additionally, the MMU-enabling function is written in C, which means
there's an active stack at the time of enabling MMU. On some systems,
like Arm DynamIQ, having active stack while enabling MMU during warm
boot might lead to coherency problems.
This patch addresses both the above problems by:
- Splitting the MMU-enabling function into two: one that sets up
values to be programmed into the registers, and another one that
takes the pre-computed values and writes to the appropriate
registers. With this, the primary effectively calls both functions
to have the MMU enabled, but secondaries only need to call the
latter.
- Rewriting the function that enables MMU in assembly so that it
doesn't use stack.
This patch fixes a bunch of MISRA issues on the way.
Change-Id: I0faca97263a970ffe765f0e731a1417e43fbfc45
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Jeenu Viswambharan
committed
on 27 Jun 2018
|