Merge "Increase type widths to satisfy width requirements" into integration

Increase type widths to satisfy width requirements ...

Usually, C has no problem up-converting types to larger bit sizes. MISRA
rule 10.7 requires that you not do this, or be very explicit about this.
This resolves the following required rule:

    bl1/aarch64/bl1_context_mgmt.c:81:[MISRA C-2012 Rule 10.7 (required)]<None>
    The width of the composite expression "0U | ((mode & 3U) << 2U) | 1U |
    0x3c0U" (32 bits) is less that the right hand operand
    "18446744073709547519ULL" (64 bits).

This also resolves MISRA defects such as:

    bl2/aarch64/bl2arch_setup.c:18:[MISRA C-2012 Rule 12.2 (required)]
    In the expression "3U << 20", shifting more than 7 bits, the number
    of bits in the essential type of the left expression, "3U", is
    not allowed.

Further, MISRA requires that all shifts don't overflow. The definition of
PAGE_SIZE was (1U << 12), and 1U is 8 bits. This caused about 50 issues.
This fixes the violation by changing the definition to 1UL << 12. Since
this uses 32bits, it should not create any issues for aarch32.

This patch also contains a fix for a build failure in the sun50i_a64
platform. Specifically, these misra fixes removed a single and
instruction,

    92407e73        and     x19, x19, #0xffffffff

from the cm_setup_context function caused a relocation in
psci_cpus_on_start to require a linker-generated stub. This increased the
size of the .text section and caused an alignment later on to go over a
page boundary and round up to the end of RAM before placing the .data
section. This sectionn is of non-zero size and therefore causes a link
error.

The fix included in this reorders the functions during link time
without changing their ording with respect to alignment.

Change-Id: I76b4b662c3d262296728a8b9aab7a33b02087f16
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

Don't return error information from console_flush ...

And from crash_console_flush.

We ignore the error information return by console_flush in _every_
place where we call it, and casting the return type to void does not
work around the MISRA violation that this causes. Instead, we collect
the error information from the driver (to avoid changing that API), and
don't return it to the caller.

Change-Id: I1e35afe01764d5c8f0efd04f8949d333ffb688c1
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

Merge "plat/arm: Introduce and use libc_asm.mk makefile" into integration

Merge changes from topic "ehf_common" into integration ...

* changes:
  plat: tegra: Use generic ehf defines
  ehf: use common priority level enumuration

lib: fconf: Implement a parser to populate CoT ...

Implemented a parser which populates the properties of
the CoT descriptors as per the binding document [1].
'COT_DESC_IN_DTB' build option is disabled by default and can
be enabled in future for all Arm platforms by making necessary
changes in the memory map.
Currently, this parser is tested only for FVP platform.

[1]:
https://trustedfirmware-a.readthedocs.io/en/latest/components/cot-binding.html

Change-Id: I2f911206087a1a2942aa728de151d2ac269d27cc
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Merge "SPM: Get rid of uint32_t array representation of UUID" into integration

SPM: Get rid of uint32_t array representation of UUID ...

UUID's in the device tree files were stored in little endian. So
to keep all entries in these files RFC 4122 compliant, store them in
big endian then convert it to little endian when they are read so they
can be used in the UUID data structure.

Signed-off-by: Ruari Phipps <ruari.phipps@arm.com>
Change-Id: I5674159b82b245104381df10a4e3291160d9b3b5

plat/arm: Introduce and use libc_asm.mk makefile ...

Trace analysis of FVP_Base_AEMv8A 0.0/6063 model
running in Aarch32 mode with the build options
listed below:
TRUSTED_BOARD_BOOT=1 GENERATE_COT=1
ARM_ROTPK_LOCATION=devel_ecdsa KEY_ALG=ecdsa
ROT_KEY=plat/arm/board/common/rotpk/arm_rotprivk_ecdsa.pem
shows that when auth_signature() gets called
71.99% of CPU execution time is spent in memset() function
written in C using single byte write operations,
see lib\libc\memset.c.
This patch introduces new libc_asm.mk makefile which
replaces C memset() implementation with assembler
version giving the following results:
- for Aarch32 in auth_signature() call memset() CPU time
reduced to 20.56%.
The number of CPU instructions (Inst) executed during
TF-A boot stage before start of BL33 in RELEASE builds
for different versions is presented in the tables below,
where:
- C TF-A: existing TF-A C code;
- C musl: "lightweight code" C "implementation of the
  standard library for Linux-based systems"
https://git.musl-libc.org/cgit/musl/tree/src/string/memset.c
- Asm Opt: assemler version from "Arm Optimized Routines"
  project
https://github.com/ARM-software/optimized-routines/blob/
master/string/arm/memset.S
- Asm Linux: assembler version from Linux kernel
https://github.com/torvalds/linux/blob/master/arch/arm/lib/memset.S
- Asm TF-A: assembler version from this patch

Aarch32:
+-----------+------+------+--------------+----------+
| Variant   | Set  | Size |    Inst 	 |  Ratio   |
+-----------+------+------+--------------+----------+
| C TF-A    | T32  | 16   | 2122110003   | 1.000000 |
| C musl    | T32  | 156  | 1643917668   | 0.774662 |
| Asm Opt   | T32  | 84   | 1604810003   | 0.756233 |
| Asm Linux | A32  | 168  | 1566255018   | 0.738065 |
| Asm TF-A  | A32  | 160  | 1525865101   | 0.719032 |
+-----------+------+------+--------------+----------+

AArch64:
+-----------+------+------------+----------+
| Variant   | Size |    Inst    |  Ratio   |
+-----------+------+------------+----------+
| C TF-A    | 28   | 2732497518 | 1.000000 |
| C musl    | 212  | 1802999999 | 0.659836 |
| Asm TF-A  | 140  | 1680260003 | 0.614917 |
+-----------+------+------------+----------+

This patch modifies 'plat\arm\common\arm_common.mk'
by overriding libc.mk makefile with libc_asm.mk and
does not effect other platforms.

Change-Id: Ie89dd0b74ba1079420733a0d76b7366ad0157c2e
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Merge "plat/arm: Get the base address of nv-counters from device tree" into integration

sp_min: Avoid platform security reconfiguration ...

In the case of Juno AArch32, platform security configuration
gets done from both BL2 and SP_MIN(BL32) components when
JUNO_AARCH32_EL3_RUNTIME and RESET_TO_SP_MIN build options
are set.
Fix is provided to avoid Platform security configuration from
SP_MIN when it is already done in BL2.

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I702e91dacb4cdd2d10e339ddeaea91289bef3229

plat/arm: Get the base address of nv-counters from device tree ...

Using the Fconf, register base address of the various nv-counters
(currently, trusted, non-trusted nv-counters) are moved to the
device tree and retrieved during run-time. This feature is
enabled using the build option COT_DESC_IN_DTB.

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I236f532e63cea63b179f60892cb406fc05cd5830

ehf: use common priority level enumuration ...

'EHF' is used by RAS, SDEI, SPM_MM common frameworks.
If platform needs to plug-in specific handlers then
'PLAT_EHF_DESC' can be used to populate platform specific
priority levels.

Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Change-Id: I37af7e0e48111f87b6982604bf5c15db3e05755d

Merge changes from topic "at_errata_fix" into integration ...

* changes:
  doc: Update description for AT speculative workaround
  lib/cpus: Report AT speculative erratum workaround
  Add wrapper for AT instruction

Add wrapper for AT instruction ...

In case of AT speculative workaround applied, page table walk
is disabled for lower ELs (EL1 and EL0) in EL3.
Hence added a wrapper function which temporarily enables page
table walk to execute AT instruction for lower ELs and then
disables page table walk.

Execute AT instructions directly for lower ELs (EL1 and EL0)
assuming page table walk is enabled always when AT speculative
workaround is not applied.

Change-Id: I4ad4c0bcbb761448af257e9f72ae979473c0dde8
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

plat/arm: remove common code for soc-id feature ...

Removed common code for soc-id feature which is applicable
for all arm platforms.

In subsequent patches, added a platform based functions
for FVP and Juno to retrieve the soc-id information.

Change-Id: Idb632a935758a6caff2ca03a6eab8f663da8a93a
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Merge changes from topic "sp_dual_signing" into integration ...

* changes:
  SPM: Add owner field to cactus secure partitions
  SPM: Alter sp_gen.mk entry depending on owner of partition
  plat/arm: enable support for Plat owned SPs

plat/arm: enable support for Plat owned SPs ...

For Arm platforms SPs are loaded by parsing tb_fw_config.dts and
adding them to SP structure sequentially, which in-turn is appended to
loadable image list.

With recently introduced dualroot CoT for SPs where they are owned
either by SiP or by Platform. SiP owned SPs index starts at SP_PKG1_ID
and Plat owned SPs index starts at SP_PKG5_ID. As the start index of SP
depends on the owner, there should be a mechanism to parse owner of a SP
and put it at the correct index in SP structure.

This patch adds support for parsing a new optional field "owner" and
based on it put SP details(UUID & Load-address) at the correct index in
SP structure.

Change-Id: Ibd255b60d5c45023cc7fdb10971bef6626cb560b
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

Prevent colliding identifiers ...

There was a collision between the name of the typedef in the CASSERT and
something else, so we make the name of the typedef unique to the
invocation of DEFFINE_SVC_UUID2 by appending the name that's passed into
the macro. This eliminates the following MISRA violation:

    bl1/bl1_main.c:233:[MISRA C-2012 Rule 5.6 (required)] Identifier
    "invalid_svc_uuid" is already used to represent a typedef.

This also resolves MISRA rule 5.9.

These renamings are as follows:
  * tzram -> secram. This matches the function call name as it has
  sec_mem in it's  name
  * fw_config_base -> config_base. This file does not mess with
  hw_conig, so there's little chance of confusion

Change-Id: I8734ba0956140c8e29b89d0596d10d61a6ef351e
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

plat/arm: Reduce size of BL31 binary ...

BL31 binary size is aligned to 4KB because of the
code in include\plat\arm\common\arm_reclaim_init.ld.S:
    __INIT_CODE_UNALIGNED__ = .;
    . = ALIGN(PAGE_SIZE);
    __INIT_CODE_END__ = .;
with all the zero data after the last instruction of
BL31 code to the end of the page.
This causes increase in size of BL31 binary stored in FIP
and its loading time by BL2.
This patch reduces the size of BL31 image by moving
page alignment from __INIT_CODE_END__ to __STACKS_END__
which also increases the stack size for secondary CPUs.

Change-Id: Ie2ec503fc774c22c12ec506d74fd3ef2b0b183a9
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

tbbr/dualroot: rename SP package certificate file ...

Currently only single signing domain is supported for SP packages but
there is plan to support dual signing domains if CoT is dualroot.

SP_CONTENT_CERT_ID is the certificate file which is currently generated
and signed with trusted world key which in-turn is derived from Silicon
provider RoT key.
To allow dual signing domain for SP packages, other certificate file
will be derived from Platform owned RoT key.

This patch renames "SP_CONTENT_CERT_ID" to "SIP_SP_CONTENT_CERT_ID" and
does other related changes.

Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I0bc445a3ab257e2dac03faa64f46e36a9fed5e93

Merge "fconf: spm: minor bug fix" into integration

fconf: spm: minor bug fix ...

This patch fixes a bug where wrong panic was caused when the number
of SP was same as max limit.

Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I9ace62d8d5bcdc410eeacdd9d33d55a7be5fcc8e

Merge "plat/arm: Disable SMCCC_ARCH_SOC_ID feature" into integration

plat/arm: Disable SMCCC_ARCH_SOC_ID feature ...

Currently, soc-revision information is not available for arm
platforms hence disabled 'SMCCC_ARCH_SOC_ID' feature for all arm
platforms.

Change-Id: I1ab878c6a4c8fecfff63bc6dde83e3ecefe20279
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

plat/arm: spm: add support for RESET_TO_BL31 ...

SPM(BL32) and hafnium(BL33) expect their manifest base address in x0
register, which is updated during BL2 stage by parsing fw_config.
In case of RESET_TO_BL31 it has to be updated while populating
entry point information.

Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I6f4a97f3405029bd6ba25f0935e2d1f74bb95517

plat/arm: Move fconf population after the enablement of MMU ...

In BL2, fw_config's population happened before the cache gets
enabled.
Hence to boost the performance, moved fw_config's population
after cache gets enabled (i.e. after MMU gets enabled).

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I2e75cabd76b1cb7a660f6b72f409ab40d2877284

lib/fconf: Update 'set_fw_config_info' function ...

Updated the function 'set_fw_config_info' to make it generic
by doing below changes:

1. Rename function name from 'set_fw_config_info' to 'set_config_info'
2. Take image_id as an argument so that this function can set any
   config information.

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Icf29e19d3e9996d8154d84dbbbc76712fab0f0c1

lib/fconf: Update data type of config max size ...

Update the data type of the member 'config_max_size' present in the
structure 'dyn_cfg_dtb_info_t' to uint32_t.

This change is being done so that dyn_cfg_dtb_info_t and image_info
structure should use same data type for maximum size.

Change-Id: I9b5927a47eb8351bbf3664b8b1e047ae1ae5a260
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

plat/arm: Check the need for firmware update only once ...

Currently, the need for firmware update is being checked twice
in the code hence modifications are done to do this check only
once and set the global variable.
Then this global variable helps to decide whether to go for
normal boot or firmware update flow.

Change-Id: I8469284555a8039786f34670f9dc4830f87aecc1
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>