2018-01-24 |
Merge pull request #1193 from jwerner-chromium/JW_coreboot
...
New console API and coreboot support [v4]
davidcunado-arm
authored
on 24 Jan 2018
GitHub
committed
on 24 Jan 2018
|
2018-01-19 |
Merge pull request #1227 from geesun/qx/emmc_macros
...
emmc: add macros CMD21, BUS_WIDTH_DDR_4 and BUS_WIDTH_DDR_8
davidcunado-arm
authored
on 19 Jan 2018
GitHub
committed
on 19 Jan 2018
|
coreboot: Add support for CBMEM console
...
coreboot supports an in-memory console to store firmware logs even when
no serial console is available. It is widely supported by
coreboot-compatible bootloaders (including SeaBIOS and GRUB) and can be
read by the Linux kernel.
This patch allows BL31 to add its own log messages to this console. The
driver will be registered automatically if coreboot support is compiled
in and detects the presence of a console buffer in the coreboot tables.
Change-Id: I31254dfa0c2fdeb7454634134b5707b4b4154907
Signed-off-by: Julius Werner <jwerner@chromium.org>
Julius Werner
committed
on 19 Jan 2018
|
drivers: cadence: cdns: Update CDNS driver to support MULTI_CONSOLE_API
...
This patch updates the Cadence CDNS console driver to support the new
console API. The driver will continue to support the old API as well by
checking the MULTI_CONSOLE_API compile-time flag.
Change-Id: I2ef8fb0d6ab72696997db1e0243a533499569d6b
Signed-off-by: Julius Werner <jwerner@chromium.org>
Julius Werner
committed
on 19 Jan 2018
|
drivers: arm: pl011: Update PL011 driver to support MULTI_CONSOLE_API
...
This patch updates the ARM PL011 console driver to support the new
console API. The driver will continue to support the old API as well by
checking the MULTI_CONSOLE_API compile-time flag.
Change-Id: Ic34e4158addbb0c5fae500c9cff899c05a4f4206
Signed-off-by: Julius Werner <jwerner@chromium.org>
Julius Werner
committed
on 19 Jan 2018
|
drivers: ti: uart: Update 16550 UART driver to support MULTI_CONSOLE_API
...
This patch updates the TI 16550 console driver to support the new
console API. The driver will continue to support the old API as well by
checking the MULTI_CONSOLE_API compile-time flag.
Change-Id: I60a44b7ba3c35c74561824c04b8dbe3e3039324c
Signed-off-by: Julius Werner <jwerner@chromium.org>
Julius Werner
committed
on 19 Jan 2018
|
Merge pull request #1200 from robertovargas-arm/bl2-el3
...
Add BL2_AT_EL3 build option
davidcunado-arm
authored
on 19 Jan 2018
GitHub
committed
on 19 Jan 2018
|
2018-01-18 |
bl2-el3: Don't compile BL1 when BL2_AT_EL3 is defined in FVP
...
This patch modifies the makefiles to avoid the definition
of BL1_SOURCES and BL2_SOURCES in the tbbr makefiles, and
it lets to the platform makefiles to define them if they
actually need these images. In the case of BL2_AT_EL3
BL1 will not be needed usually because the Boot ROM will
jump directly to BL2.
Change-Id: Ib6845a260633a22a646088629bcd7387fe35dcf9
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Roberto Vargas
committed
on 18 Jan 2018
|
2018-01-17 |
emmc: add macros CMD21, BUS_WIDTH_DDR_4 and BUS_WIDTH_DDR_8
...
Add some macros according to JEDEC Standard Embedded Multi-Media
Card (eMMC) Electrical Standard (5.1)": Table 145 - Bus Mode
Selection.
Change-Id: Iaa45e0582653ef4290efd60d039f0bdc420eeb47
Signed-off-by: Qixiang Xu <qixiang.xu@arm.com>
Qixiang Xu
committed
on 17 Jan 2018
|
2018-01-11 |
emmc/dw_mmc: fix the assert on HLE bit
...
When check HLE bit in interrupt register, it should check whether
HLE bit is set, not clear.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Haojian Zhuang
committed
on 11 Jan 2018
|
2017-12-19 |
Merge pull request #1194 from robertovargas-arm/io-fix
...
io: block: fix block_read/write may read/write overlap buffer
davidcunado-arm
authored
on 19 Dec 2017
GitHub
committed
on 19 Dec 2017
|
2017-12-13 |
io: block: fix block_read/write may read/write overlap buffer
...
The block operations were trying to optimize the number of memory
copies, and it tried to use directly the buffer supplied by the user
to them. This was a mistake because it created too many corner cases:
1- It was possible to generate unaligned
operations to unaligned buffers. Drivers that were using
DMA transfer failed in that case.
2- It was possible to generate read operations
with sizes that weren't a multiple of the block size. Some
low level drivers assumed that condition and they calculated
the number of blocks dividing the number of bytes by the
size of the block, without considering the remaining bytes.
3- The block_* operations didn't control the
number of bytes actually copied to memory, because the
low level drivers were writing directly to the user buffer.
This patch rewrite block_read and block_write to use always the device
buffer, which the platform ensures that has the correct aligment and
the correct size.
Change-Id: I5e479bb7bc137e6ec205a8573eb250acd5f40420
Signed-off-by: Qixiang Xu <qixiang.xu@arm.com>
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Roberto Vargas
committed
on 13 Dec 2017
|
2017-12-12 |
Add new function-pointer-based console API
...
This patch overhauls the console API to allow for multiple console
instances of different drivers that are active at the same time. Instead
of binding to well-known function names (like console_core_init),
consoles now provide a register function (e.g. console_16550_register())
that will hook them into the list of active consoles. All console
operations will be dispatched to all consoles currently in the list.
The new API will be selected by the build-time option MULTI_CONSOLE_API,
which defaults to ${ERROR_DEPRECATED} for now. The old console API code
will be retained to stay backwards-compatible to older platforms, but
should no longer be used for any newly added platforms and can hopefully
be removed at some point in the future.
The new console API is intended to be used for both normal (bootup) and
crash use cases, freeing platforms of the need to set up the crash
console separately. Consoles can be individually configured to be active
active at boot (until first handoff to EL2), at runtime (after first
handoff to EL2), and/or after a crash. Console drivers should set a sane
default upon registration that can be overridden with the
console_set_scope() call. Code to hook up the crash reporting mechanism
to this framework will be added with a later patch.
This patch only affects AArch64, but the new API could easily be ported
to AArch32 as well if desired.
Change-Id: I35c5aa2cb3f719cfddd15565eb13c7cde4162549
Signed-off-by: Julius Werner <jwerner@chromium.org>
Julius Werner
committed
on 12 Dec 2017
|
2017-11-23 |
Merge pull request #1145 from etienne-lms/rfc-armv7-2
...
Support ARMv7 architectures
davidcunado-arm
authored
on 23 Nov 2017
GitHub
committed
on 23 Nov 2017
|
2017-11-21 |
tbbr: Add build flag HASH_ALG to let the user to select the SHA
...
The flag support the following values:
- sha256 (default)
- sha384
- sha512
Change-Id: I7a49d858c361e993949cf6ada0a86575c3291066
Signed-off-by: Qixiang Xu <qixiang.xu@arm.com>
Qixiang Xu
committed
on 21 Nov 2017
|
2017-11-13 |
GIC: Fix Group 0 enabling
...
At present, the GIC drivers enable Group 0 interrupts only if there are
Secure SPIs listed in the interrupt properties/list. This means that,
even if there are Group 0 SGIs/PPIs configured, the group remained
disabled in the absence of a Group 0 SPI.
Modify both GICv2 and GICv3 SGI/PPI configuration to enable Group 0 when
corresponding SGIs/PPIs are present.
Change-Id: Id123e8aaee0c22b476eebe3800340906d83bbc6d
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Jeenu Viswambharan
committed
on 13 Nov 2017
|
GICv2: Fix populating PE target data
...
This patch brings in the following fixes:
- The per-PE target data initialized during power up needs to be
flushed so as to be visible to other PEs.
- Setup per-PE target data for the primary PE as well. At present,
this was only setup for secondary PEs when they were powered on.
Change-Id: Ibe3a57c14864e37b2326dd7ab321a5c7bf80e8af
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Jeenu Viswambharan
committed
on 13 Nov 2017
|
2017-11-08 |
ARMv7: GICv2 driver can manage GICv1 with security extension
...
Some SoCs integrate a GIC in version 1 that is currently not supported
by the trusted firmware. This change hijacks GICv2 driver to handle the
GICv1 as GICv1 is compatible enough with GICv2 as far as the platform
does not attempt to play with virtualization support or some GICv2
specific power features.
Note that current trusted firmware does not use these GICv2 features
that are not available in GICv1 Security Extension.
Change-Id: Ic2cb3055f1319a83455571d6d918661da583f179
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Etienne Carriere
committed
on 8 Nov 2017
|
2017-10-16 |
GIC: Allow specifying interrupt properties
...
The GIC driver initialization currently allows an array of interrupts to
be configured as secure. Future use cases would require more interrupt
configuration other than just security, such as priority.
This patch introduces a new interrupt property array as part of both
GICv2 and GICv3 driver data. The platform can populate the array with
interrupt numbers and respective properties. The corresponding driver
initialization iterates through the array, and applies interrupt
configuration as required.
This capability, and the current way of supplying array (or arrays, in
case of GICv3) of secure interrupts, are however mutually exclusive.
Henceforth, the platform should supply either:
- A list of interrupts to be mapped as secure (the current way).
Platforms that do this will continue working as they were. With this
patch, this scheme is deprecated.
- A list of interrupt properties (properties include interrupt group).
Individual interrupt properties are specified via. descriptors of
type 'interrupt_prop_desc_t', which can be populated with the macro
INTR_PROP_DESC().
A run time assert checks that the platform doesn't specify both.
Henceforth the old scheme of providing list of secure interrupts is
deprecated. When built with ERROR_DEPRECATED=1, GIC drivers will require
that the interrupt properties are supplied instead of an array of secure
interrupts.
Add a section to firmware design about configuring secure interrupts.
Fixes ARM-software/tf-issues#262
Change-Id: I8eec29e72eb69dbb6bce77879febf32c95376942
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Jeenu Viswambharan
committed
on 16 Oct 2017
|
GIC: Add helpers to set interrupt configuration
...
The helpers perform read-modify-write on GIC*_ICFGR registers, but don't
serialise callers. Any serialisation must be taken care of by the
callers.
Change-Id: I71995f82ff2c7f70d37af0ede30d6ee18682fd3f
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Jeenu Viswambharan
committed
on 16 Oct 2017
|
GIC: Add API to set priority mask
...
API documentation updated.
Change-Id: I40feec1fe67a960d035061b54dd55610bc34ce1d
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Jeenu Viswambharan
committed
on 16 Oct 2017
|
GIC: Add API to set/clear interrupt pending
...
API documentation updated.
Change-Id: I14e33cfc7dfa93257c82d76fae186b17a1b6d266
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Jeenu Viswambharan
committed
on 16 Oct 2017
|
GIC: Add API to set interrupt routing
...
SPIs can be routed to either a specific PE, or to any one of all
available PEs.
API documentation updated.
Change-Id: I28675f634568aaf4ea1aa8aa7ebf25b419a963ed
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Jeenu Viswambharan
committed
on 16 Oct 2017
|
GIC: Add API to raise secure SGI
...
API documentation updated.
Change-Id: I129725059299af6cc612bafa8d74817f779d7c4f
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Jeenu Viswambharan
committed
on 16 Oct 2017
|
GIC: Add APIs to set interrupt type and query support
...
The back end GIC driver converts and assigns the interrupt type to
suitable group.
For GICv2, a build option GICV2_G0_FOR_EL3 is introduced, which
determines to which type Group 0 interrupts maps to.
- When the build option is set 0 (the default), Group 0 interrupts are
meant for Secure EL1. This is presently the case.
- Otherwise, Group 0 interrupts are meant for EL3. This means the SPD
will have to synchronously hand over the interrupt to Secure EL1.
The query API allows the platform to query whether the platform supports
interrupts of a given type.
API documentation updated.
Change-Id: I60fdb4053ffe0bd006b3b20914914ebd311fc858
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Jeenu Viswambharan
committed
on 16 Oct 2017
|
GIC: Add API to set interrupt priority
...
API documentation updated.
Change-Id: Ib700eb1b8ca65503aeed0ac4ce0e7b934df67ff9
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Jeenu Viswambharan
committed
on 16 Oct 2017
|
GIC: Add APIs to enable and disable interrupt
...
API documentation updated.
Change-Id: Ice7511f8df5356851001d2f7dc2a46cfe318f9ba
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Jeenu Viswambharan
committed
on 16 Oct 2017
|
GIC: Add API to get interrupt active status
...
API documentation updated.
Change-Id: I6d61785af0d5330930c709de971a904dc7c3516c
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Jeenu Viswambharan
committed
on 16 Oct 2017
|
GICv2: Add driver API to set PE target mask
...
The PE target mask is used to translate linear PE index (returned by
platform core position) to a bit mask used when targeting interrupts to
a PE, viz. when raising SGIs and routing SPIs.
The platform shall:
- Populate the driver data with a pointer to array that's to contain
per-PE target masks.
- Invoke the new driver API 'gicv2_set_pe_target_mask()' during
per-CPU initialization so that the driver populates the target mask
for that CPU.
Platforms that don't intend to target interrupts or raise SGIs need not
populate this.
Change-Id: Ic0db54da86915e9dccd82fff51479bc3c1fdc968
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Jeenu Viswambharan
committed
on 16 Oct 2017
|
GIC: Add API to get running priority
...
Document the API in separate platform interrupt controller API document.
Change-Id: If18f208e10a8a243f5c59d226fcf48e985941949
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Jeenu Viswambharan
committed
on 16 Oct 2017
|