Merge pull request #1540 from MISL-EBU-System-SW/marvell-updates-18.09 ...

Marvell updates 18.09

gicv2: enable configuring IRQ trigger type ...

This patch introduces new helper routines that allow
configuring the individual IRQs to be edge/level-triggered
via GICD_ICFGR registers. This is helpful to modify
the default configuration of the non-secure GIC SPI's, which
are all set during initialization to be level-sensitive.

Change-Id: I23deb4a0381691a686a3cda52405aa1dfd5e56f2
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

Merge pull request #1542 from antonio-nino-diaz-arm/an/bl31-misra ...

Some MISRA fixes in BL31, cci and smmu

drivers: cci: Fix MISRA defects ...

Change-Id: Ifdb0ceec19d267b14d796b5d31f08f7342190484
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

drivers: smmu: Fix MISRA defects ...

Change-Id: I2954a99d5b72069bcb7bac9d6926c6209d6ba881
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

gic: Fix types ...

Change-Id: I6a2adef87c20f9279446a54b7e69618fba3d2a25
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

gic: Fix definitions ...

Change-Id: I945029ca26ea2e63f0d92c5f33019b882f23bd72
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

gic v3: Turn macros into static inline functions ...

Change-Id: Ib587f12f36810fc7d4f4b8f575195554299b8ed4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

libc: Fix all includes in codebase ...

The codebase was using non-standard headers. It is needed to replace
them by the correct ones so that we can use the new libc headers.

Change-Id: I530f71d9510cb036e69fe79823c8230afe890b9d
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

EHF: MISRA fixes ...

These changes address most of the required MISRA rules. In the process,
some from generic code are also fixed.

No functional changes.

Change-Id: I19786070af7bc5e1f6d15bdba93e22a4451d8fe9
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Fix MISRA defects in SP805 driver ...

Fix violations of MISRA C-2012 Rules 10.1, 10.3 and 10.4.

Change-Id: I13c6acda798c1666892f630f097a23e68748f9e4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

DMC500: Add platform support to set system interface count ...

Some low end platforms using DMC500 memory controller do not have
CCI(Cache Coherent Interconnect) interface and only have non-coherent
system interface support. Hence this patch makes the system interface
count configurable from the platforms.

Change-Id: I6d54c90eb72fd18026c6470c1f7fd26c59dc4b9a
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>

GIC: Fix setting interrupt configuration ...

- Interrupt configuration is a 2-bit field, so the field shift has to
    be double that of the bit number.

  - Interrupt configuration (level- or edge-trigger) is specified in the
    MSB of the field, not LSB.

Fixes applied to both GICv2 and GICv3 drivers.

Fixes ARM-software/tf-issues#570

Change-Id: Ia6ae6ed9ba9fb0e3eb0f921a833af48e365ba359
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Emit warnings when using deprecated GIC init ...

Emit runtime warnings when intializing the GIC drivers using the
deprecated method of defining integer interrupt arrays in the GIC driver
data structures; interrupt_prop_t arrays should be used instead. This
helps platforms detect that they have migration work to do. Previously,
no warning was emitted in this case. This affects both the GICv2 and GICv3
drivers.

Also use the __deprecated attribute to emit a build time warning if these
deprecated fields are used. These warnings are suppressed in the GIC
driver compatibility functions but will be visible if platforms use them.

Change-Id: I6b6b8f6c3b4920c448b6dcb82fc18442cfdf6c7a
Signed-off-by: Dan Handley <dan.handley@arm.com>

Fix MISRA rule 8.3 Part 1 ...

Rule 8.3: All declarations of an object or function shall
          use the same names and type qualifiers.

Fixed for:

	make DEBUG=1 PLAT=fvp LOG_LEVEL=50 all

Change-Id: I48201c9ef022f6bd42ea8644529afce70f9b3f22
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

drivers: arm: pl011: Update PL011 driver to support MULTI_CONSOLE_API ...

This patch updates the ARM PL011 console driver to support the new
console API. The driver will continue to support the old API as well by
checking the MULTI_CONSOLE_API compile-time flag.

Change-Id: Ic34e4158addbb0c5fae500c9cff899c05a4f4206
Signed-off-by: Julius Werner <jwerner@chromium.org>

Merge pull request #1145 from etienne-lms/rfc-armv7-2 ...

Support ARMv7 architectures

BL31: Program Priority Mask for SMC handling ...

On GICv3 systems, as a side effect of adding provision to handle EL3
interrupts (unconditionally routing FIQs to EL3), pending Non-secure
interrupts (signalled as FIQs) may preempt execution in lower Secure ELs
[1]. This will inadvertently disrupt the semantics of Fast SMC
(previously called Atomic SMC) calls.

To retain semantics of Fast SMCs, the GIC PMR must be programmed to
prevent Non-secure interrupts from preempting Secure execution. To that
effect, two new functions in the Exception Handling Framework subscribe
to events introduced in an earlier commit:

  - Upon 'cm_exited_normal_world', the Non-secure PMR is stashed, and
    the PMR is programmed to the highest Non-secure interrupt priority.

  - Upon 'cm_entering_normal_world', the previously stashed Non-secure
    PMR is restored.

The above sequence however prevents Yielding SMCs from being preempted
by Non-secure interrupts as intended. To facilitate this, the public API
exc_allow_ns_preemption() is introduced that programs the PMR to the
original Non-secure PMR value. Another API
exc_is_ns_preemption_allowed() is also introduced to check if
exc_allow_ns_preemption() had been called previously.

API documentation to follow.

[1] On GICv2 systems, this isn't a problem as, unlike GICv3, pending NS
    IRQs during Secure execution are signalled as IRQs, which aren't
    routed to EL3.

Change-Id: Ief96b162b0067179b1012332cd991ee1b3051dd0
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

GIC: Introduce API to get interrupt ID ...

Acknowledging interrupt shall return a raw value from the interrupt
controller in which the actual interrupt ID may be encoded. Add a
platform API to extract the actual interrupt ID from the raw value
obtained from interrupt controller.

Document the new function. Also clarify the semantics of interrupt
acknowledge.

Change-Id: I818dad7be47661658b16f9807877d259eb127405
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

ARMv7: GICv2 driver can manage GICv1 with security extension ...

Some SoCs integrate a GIC in version 1 that is currently not supported
by the trusted firmware. This change hijacks GICv2 driver to handle the
GICv1 as GICv1 is compatible enough with GICv2 as far as the platform
does not attempt to play with virtualization support or some GICv2
specific power features.

Note that current trusted firmware does not use these GICv2 features
that are not available in GICv1 Security Extension.

Change-Id: Ic2cb3055f1319a83455571d6d918661da583f179
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>

ARM platforms: Migrate to using interrupt properties ...

An earlier patch added provision for the platform to provide secure
interrupt properties. ARM platforms already has a list of interrupts
that fall into different secure groups.

This patch defines macros that enumerate interrupt properties in the
same fashion, and points the driver driver data to a list of interrupt
properties rather than list of secure interrupts on ARM platforms.  The
deprecated interrupt list definitions are however retained to support
legacy builds.

Configuration applied to individual interrupts remain unchanged, so no
runtime behaviour change expected.

NOTE: Platforms that use the arm/common function
plat_arm_gic_driver_init() must replace their PLAT_ARM_G1S_IRQS and
PLAT_ARM_G0_IRQS macro definitions with PLAT_ARM_G1S_IRQ_PROPS and
PLAT_ARM_G0_IRQ_PROPS macros respectively, using the provided
INTR_PROP_DESC macro.

Change-Id: I24d643b83e3333753a3ba97d4b6fb71e16bb0952
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

GIC: Allow specifying interrupt properties ...

The GIC driver initialization currently allows an array of interrupts to
be configured as secure. Future use cases would require more interrupt
configuration other than just security, such as priority.

This patch introduces a new interrupt property array as part of both
GICv2 and GICv3 driver data. The platform can populate the array with
interrupt numbers and respective properties. The corresponding driver
initialization iterates through the array, and applies interrupt
configuration as required.

This capability, and the current way of supplying array (or arrays, in
case of GICv3) of secure interrupts, are however mutually exclusive.
Henceforth, the platform should supply either:

  - A list of interrupts to be mapped as secure (the current way).
    Platforms that do this will continue working as they were. With this
    patch, this scheme is deprecated.

  - A list of interrupt properties (properties include interrupt group).
    Individual interrupt properties are specified via. descriptors of
    type 'interrupt_prop_desc_t', which can be populated with the macro
    INTR_PROP_DESC().

A run time assert checks that the platform doesn't specify both.

Henceforth the old scheme of providing list of secure interrupts is
deprecated. When built with ERROR_DEPRECATED=1, GIC drivers will require
that the interrupt properties are supplied instead of an array of secure
interrupts.

Add a section to firmware design about configuring secure interrupts.

Fixes ARM-software/tf-issues#262

Change-Id: I8eec29e72eb69dbb6bce77879febf32c95376942
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

GIC: Add helpers to set interrupt configuration ...

The helpers perform read-modify-write on GIC*_ICFGR registers, but don't
serialise callers. Any serialisation must be taken care of by the
callers.

Change-Id: I71995f82ff2c7f70d37af0ede30d6ee18682fd3f
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

GIC: Add API to set priority mask ...

API documentation updated.

Change-Id: I40feec1fe67a960d035061b54dd55610bc34ce1d
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

GIC: Add API to set/clear interrupt pending ...

API documentation updated.

Change-Id: I14e33cfc7dfa93257c82d76fae186b17a1b6d266
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

GIC: Add API to set interrupt routing ...

SPIs can be routed to either a specific PE, or to any one of all
available PEs.

API documentation updated.

Change-Id: I28675f634568aaf4ea1aa8aa7ebf25b419a963ed
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

GIC: Add API to raise secure SGI ...

API documentation updated.

Change-Id: I129725059299af6cc612bafa8d74817f779d7c4f
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

GIC: Add APIs to set interrupt type and query support ...

The back end GIC driver converts and assigns the interrupt type to
suitable group.

For GICv2, a build option GICV2_G0_FOR_EL3 is introduced, which
determines to which type Group 0 interrupts maps to.

 - When the build option is set 0 (the default), Group 0 interrupts are
   meant for Secure EL1. This is presently the case.

 - Otherwise, Group 0 interrupts are meant for EL3. This means the SPD
   will have to synchronously hand over the interrupt to Secure EL1.

The query API allows the platform to query whether the platform supports
interrupts of a given type.

API documentation updated.

Change-Id: I60fdb4053ffe0bd006b3b20914914ebd311fc858
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

GIC: Add API to set interrupt priority ...

API documentation updated.

Change-Id: Ib700eb1b8ca65503aeed0ac4ce0e7b934df67ff9
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

GIC: Add APIs to enable and disable interrupt ...

API documentation updated.

Change-Id: Ice7511f8df5356851001d2f7dc2a46cfe318f9ba
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>