Fix warnings in porting-guide.rst ...

Fix below warnings appeared in porting-guide.rst
WARNING: Title underline too short.

Change-Id: Ibc0eba0da72a53a5f9b61c49a8bf7a10b17bc3b8
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Implement SMCCC_ARCH_SOC_ID SMC call ...

Implemented SMCCC_ARCH_SOC_ID call in order to get below
SOC information:

1. SOC revision
2. SOC version

Implementation done using below SMCCC specification document:
https://developer.arm.com/docs/den0028/c

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ie0595f1c345a6429a6fb4a7f05534a0ca9c9a48b

docs: Update docs with firmware encryption feature ...

Update documentation with optional firmware encryption feature.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I26691b18e1ee52a73090954260f26f2865c4e05a

doc: Split and expand coding style documentation ...

This patch expands the coding style documentation, splitting it
into two documents: the core style rules and extended guidelines.
Note that it does not redefine or change the coding style (aside
from section 4.6.2) - generally, it is only documenting the
existing style in more detail.

The aim is for the coding style to be more readable and, in turn,
for it to be followed by more people. We can use this as a more
concrete reference when discussing the accepted style with external
contributors.

Change-Id: I87405ace9a879d7f81e6b0b91b93ca69535e50ff
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Signed-off-by: Petre-Ionut Tudor <petre-ionut.tudor@arm.com>

Unify type of "cpu_idx" across PSCI module. ...

NOTE for platform integrators:
   API `plat_psci_stat_get_residency()` third argument
   `last_cpu_idx` is changed from "signed int" to the
   "unsigned int" type.

Issue / Trouble points
1. cpu_idx is used as mix of `unsigned int` and `signed int` in code
with typecasting at some places leading to coverity issues.

2. Underlying platform API's return cpu_idx as `unsigned int`
and comparison is performed with platform specific defines
`PLAFORM_xxx` which is not consistent

Misra Rule 10.4:
The value of a complex expression of integer type may only be cast to
a type that is narrower and of the same signedness as the underlying
type of the expression.

Based on above points, cpu_idx is kept as `unsigned int` to match
the API's and low-level functions and platform defines are updated
where ever required

Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: Ib26fd16e420c35527204b126b9b91e8babcc3a5c

doc: Split the User Guide into multiple files ...

The User Guide document has grown organically over time and
now covers a wide range of topics, making it difficult to
skim read and extract information from. Currently, it covers
these topics and maybe a couple more:

- Requirements (hardware, tools, libs)
- Checking out the repo
- Basic build instructions
- A comprehensive list of build flags
- FIP packaging
- Building specifically for Juno
- Firmware update images
- EL3 payloads
- Preloaded BL33 boot flow
- Running on FVPs
- Running on Juno

I have separated these out into a few groups that become new
documents. Broadly speaking, build instructions for the tools,
for TF-A generally, and for specific scenarios are separated.
Content relating to specific platforms (Juno and the FVPs are
Arm-specific platforms, essentially) has been moved into the
documentation that is specific to those platforms, under
docs/plat/arm.

Change-Id: Ica87c52d8cd4f577332be0b0738998ea3ba3bbec
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

doc: Misc syntax and spelling fixes ...

Tidying up a few Sphinx warnings that had built-up over time.
None of these are critical but it cleans up the Sphinx output.

At the same time, fixing some spelling errors that were detected.

Change-Id: I38209e235481eed287f8008c6de9dedd6b12ab2e
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

doc: Convert internal links to RST format ...

Currently links between documents are using the format:

<path/to/><filename>.rst

This was required for services like GitHub because they render each
document in isolation - linking to another document is like linking
to any other file, just provide the full path.

However, with the new approach, the .rst files are only the raw
source for the documents. Once the documents have been rendered
the output is now in another format (HTML in our case) and so,
when linking to another document, the link must point to the
rendered version and not the .rst file.

The RST spec provides a few methods for linking between content.
The parent of this patch enabled the automatic creation of anchors
for document titles - we will use these anchors as the targets for
our links. Additional anchors can be added by hand if needed, on
section and sub-section titles, for example.

An example of this new format, for a document with the title
"Firmware Design" is :ref:`Firmware Design`.

One big advantage of this is that anchors are not dependent on
paths. We can then move documents around, even between directories,
without breaking any links between documents. Links will need to be
updated only if the title of a document changes.

Change-Id: I9e2340a61dd424cbd8fd1ecc2dc166f460d81703
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Merge changes from topic "mp/giv3-discovery" into integration ...

* changes:
  Migrate ARM platforms to use the new GICv3 API
  Adding new optional PSCI hook pwr_domain_on_finish_late
  GICv3: Enable multi socket GIC redistributor frame discovery

Adding new optional PSCI hook pwr_domain_on_finish_late ...

This PSCI hook is similar to pwr_domain_on_finish but is
guaranteed to be invoked with the respective core and cluster are
participating in coherency. This will be necessary to safely invoke
the new GICv3 API which modifies shared GIC data structures concurrently.

Change-Id: I8e54f05c9d4ef5712184c9c18ba45ac97a29eb7a
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

drivers: partition: support different block size ...

The block size of some storage device is 4096-byte long, such as UFS. But
PARTITION_BLOCK_SIZE is defined as 512-byte long. So replace it by
PLAT_PARTITION_BLOCK_SIZE. Make it configurable in platform.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Change-Id: Iada05f7c646d0a0f2c0d3b8545540b3cb7153de3

Refactor ARMv8.3 Pointer Authentication support code ...

This patch provides the following features and makes modifications
listed below:
- Individual APIAKey key generation for each CPU.
- New key generation on every BL31 warm boot and TSP CPU On event.
- Per-CPU storage of APIAKey added in percpu_data[]
  of cpu_data structure.
- `plat_init_apiakey()` function replaced with `plat_init_apkey()`
  which returns 128-bit value and uses Generic timer physical counter
  value to increase the randomness of the generated key.
  The new function can be used for generation of all ARMv8.3-PAuth keys
- ARMv8.3-PAuth specific code placed in `lib\extensions\pauth`.
- New `pauth_init_enable_el1()` and `pauth_init_enable_el3()` functions
  generate, program and enable APIAKey_EL1 for EL1 and EL3 respectively;
  pauth_disable_el1()` and `pauth_disable_el3()` functions disable
  PAuth for EL1 and EL3 respectively;
  `pauth_load_bl31_apiakey()` loads saved per-CPU APIAKey_EL1 from
  cpu-data structure.
- Combined `save_gp_pauth_registers()` function replaces calls to
  `save_gp_registers()` and `pauth_context_save()`;
  `restore_gp_pauth_registers()` replaces `pauth_context_restore()`
  and `restore_gp_registers()` calls.
- `restore_gp_registers_eret()` function removed with corresponding
  code placed in `el3_exit()`.
- Fixed the issue when `pauth_t pauth_ctx` structure allocated space
  for 12 uint64_t PAuth registers instead of 10 by removal of macro
  CTX_PACGAKEY_END from `include/lib/el3_runtime/aarch64/context.h`
  and assigning its value to CTX_PAUTH_REGS_END.
- Use of MODE_SP_ELX and MODE_SP_EL0 macro definitions
  in `msr	spsel`  instruction instead of hard-coded values.
- Changes in documentation related to ARMv8.3-PAuth and ARMv8.5-BTI.

Change-Id: Id18b81cc46f52a783a7e6a09b9f149b6ce803211
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

doc: Complete the storage abstraction layer doc ...

Add uml sequence and class diagram to illustrate the behavior of the
storage abstraction layer.

Change-Id: I338262729f8034cc3d3eea1d0ce19cca973a91bb
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Further fixes to documentation links ...

Change-Id: Ib021c721652d96f6c06ea18741f19a72bba1d00f
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

doc: Use proper note and warning annotations ...

The documentation contains plenty of notes and warnings. Enable
special rendering of these blocks by converting the note prefix
into a .. note:: annotation.

Change-Id: I34e26ca6bf313d335672ab6c2645741900338822
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

doc: Add minimal glossary ...

One of the current issues with the documentation is that terms and
abbreviations are frequently redefined. For example, we might have
a sentence like "... the SCP (System Control Processor) will ...".

These definitions might be repeated several times across pages, or
even within the same document. Equally, some of these abbreviations
are missed and are never expanded.

Sphinx provides a :term: keyword that takes some text and,
if that text is defined in a glossary document, links to its glossary
entry. Using this functionality will prevent repeated definitions
and will make the docs more maintainable by using a single
definition source.

The glossary added in this patch was created from a quick scrub of
the source code - there may be missing entries. The SDEI abbreviation
was used as an example.

Note that a global_substitutions file was created. This file contains
the RST 'replace' statements that convert plain text terms into linked
terms (by adding the ':term:' keyword to them). An example is:

.. |TF-A| replace:: :term:`TF-A`

The 'rst_prolog' variable in conf.py is used to inject this list of
replacements into each page. Terms must be surrounded with the pipe
character to be turned into links - this means that we can still
prevent certain terms from being linked if we don't want them to be.

Change-Id: I87010ed9cfa4a60011a9b4a431b98cb4bb7baa28
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

doc: Remove per-page contents lists ...

These are no longer needed as there will always be a table of contents
rendered to the left of every page.

Some of these lists can be quite long and, when opening a page, the
reader sees nothing but a huge list of contents! After this patch,
the document contents are front-and-centre and the contents are
nicely rendered in the sidebar without duplication.

Change-Id: I444754d548ec91d00f2b04e861de8dde8856aa62
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

doc: Reword document titles ...

This patch attempts to standardise the document titles as well as
adding titles to documents that were missing one. The aim is to
remove needless references to "TF-A" or "Trusted Firmware" in the
title of every document and to make sure that the title matches
with the document content.

Change-Id: I9b93ccf43b5d57e8dc793a5311b8ed7c4dd245cc
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

doc: Move documents into subdirectories ...

This change creates the following directories under docs/
in order to provide a grouping for the content:

- components
- design
- getting_started
- perf
- process

In each of these directories an index.rst file is created
and this serves as an index / landing page for each of the
groups when the pages are compiled. Proper layout of the
top-level table of contents relies on this directory/index
structure.

Without this patch it is possible to build the documents
correctly with Sphinx but the output looks messy because
there is no overall hierarchy.

Change-Id: I3c9f4443ec98571a56a6edf775f2c8d74d7f429f
Signed-off-by: Paul Beesley <paul.beesley@arm.com>