2020-03-24 |
Merge "fconf: Clean Arm IO" into integration
Mark Dykes
authored
on 24 Mar 2020
TrustedFirmware Code Review
committed
on 24 Mar 2020
|
2020-03-23 |
spmd: skip loading of secure partitions on pre-v8.4 platforms
...
When SPD=spmd and SPMD_SPM_AT_SEL2=0, that is SPMC sits at S-EL1
then there is no need for TF-A to load secure partitions individually.
In this configuration, SPMC handles secure partition loading at
S-EL1/EL0 levels.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I06a0d88a4811274a8c347ce57b56bb5f64e345df
Olivier Deprez
authored
on 19 Mar 2020
Manish Pandey
committed
on 23 Mar 2020
|
2020-03-16 |
fconf: Clean Arm IO
...
Merge the previously introduced arm_fconf_io_storage into arm_io_storage. This
removes the duplicate io_policies and functions definition.
This patch:
- replace arm_io_storage.c with the content of arm_fconf_io_storage.c
- rename the USE_FCONF_BASED_IO option into ARM_IO_IN_DTB.
- use the ARM_IO_IN_DTB option to compile out io_policies moved in dtb.
- propagate DEFINES when parsing dts.
- use ARM_IO_IN_DTB to include or not uuid nodes in fw_config dtb.
- set the ARM_IO_IN_DTB to 0 by default for fvp. This ensure that the behavior
of fvp stays the same as it was before the introduction of fconf.
Change-Id: Ia774a96d1d3a2bccad29f7ce2e2b4c21b26c080e
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Louis Mayencourt
committed
on 16 Mar 2020
|
2020-03-10 |
Merge changes from topic "sb/dualroot" into integration
...
* changes:
plat/arm: Pass cookie argument down to arm_get_rotpk_info()
plat/arm: Add support for dualroot CoT
plat/arm: Provide some PROTK files for development
Mark Dykes
authored
on 10 Mar 2020
TrustedFirmware Code Review
committed
on 10 Mar 2020
|
2020-03-03 |
fconf: Add Secure Partitions information as property
...
Use the firmware configuration framework to retrieve information about
Secure Partitions to facilitate loading them into memory.
To load a SP image we need UUID look-up into FIP and the load address
where it needs to be loaded in memory.
This patch introduces a SP populator function which gets UUID and load
address from firmware config device tree and updates its C data
structure.
Change-Id: I17faec41803df9a76712dcc8b67cadb1c9daf8cd
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Olivier Deprez
authored
on 23 Jan 2020
Manish Pandey
committed
on 3 Mar 2020
|
2020-02-24 |
plat/arm: Add support for dualroot CoT
...
- Use the development PROTPK if using the dualroot CoT.
Note that unlike the ROTPK, the PROTPK key hash file is not generated
from the key file, instead it has to be provided. This might be
enhanced in the future.
- Define a CoT build flag for the platform code to provide different
implementations where needed.
Change-Id: Iaaf25183b94e77a99a5d8d875831d90c102a97ea
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Sandrine Bailleux
committed
on 24 Feb 2020
|
2020-02-11 |
Merge changes from topic "lm/fconf" into integration
...
* changes:
arm-io: Panic in case of io setup failure
MISRA fix: Use boolean essential type
fconf: Add documentation
fconf: Move platform io policies into fconf
fconf: Add mbedtls shared heap as property
fconf: Add TBBR disable_authentication property
fconf: Add dynamic config DTBs info as property
fconf: Populate properties from dtb during bl2 setup
fconf: Load config dtb from bl1
fconf: initial commit
Sandrine Bailleux
authored
on 11 Feb 2020
TrustedFirmware Code Review
committed
on 11 Feb 2020
|
2020-02-10 |
SPMD: enable SPM dispatcher support
...
This patch adds support to the build system to include support for the SPM
dispatcher when the SPD configuration option is spmd.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Change-Id: Ic1ae50ecd7403fcbcf1d318abdbd6ebdc642f732
Achin Gupta
authored
on 11 Oct 2019
Max Shvetsov
committed
on 10 Feb 2020
|
2020-02-07 |
fconf: Move platform io policies into fconf
...
Use the firmware configuration framework to store the io_policies
information inside the configuration device tree instead of the static
structure in the code base.
The io_policies required by BL1 can't be inside the dtb, as this one is
loaded by BL1, and only available at BL2.
This change currently only applies to FVP platform.
Change-Id: Ic9c1ac3931a4a136aa36f7f58f66d3764c1bfca1
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Louis Mayencourt
committed
on 7 Feb 2020
|
fconf: Add TBBR disable_authentication property
...
Use fconf to retrieve the `disable_authentication` property.
Move this access from arm dynamic configuration to bl common.
Change-Id: Ibf184a5c6245d04839222f5457cf5e651f252b86
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Louis Mayencourt
committed
on 7 Feb 2020
|
fconf: initial commit
...
Introduce the Firmware CONfiguration Framework (fconf).
The fconf is an abstraction layer for platform specific data, allowing
a "property" to be queried and a value retrieved without the requesting
entity knowing what backing store is being used to hold the data.
The default backing store used is C structure. If another backing store
has to be used, the platform integrator needs to provide a "populate()"
function to fill the corresponding C structure.
The "populate()" function must be registered to the fconf framework with
the "FCONF_REGISTER_POPULATOR()". This ensures that the function would
be called inside the "fconf_populate()" function.
A two level macro is used as getter:
- the first macro takes 3 parameters and converts it to a function
call: FCONF_GET_PROPERTY(a,b,c) -> a__b_getter(c).
- the second level defines a__b_getter(c) to the matching C structure,
variable, array, function, etc..
Ex: Get a Chain of trust property:
1) FCONF_GET_PROPERY(tbbr, cot, BL2_id) -> tbbr__cot_getter(BL2_id)
2) tbbr__cot_getter(BL2_id) -> cot_desc_ptr[BL2_id]
Change-Id: Id394001353ed295bc680c3f543af0cf8da549469
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Louis Mayencourt
committed
on 7 Feb 2020
|
2020-02-04 |
Merge changes from topic "mp/separate_nobits" into integration
...
* changes:
plat/arm: Add support for SEPARATE_NOBITS_REGION
Changes necessary to support SEPARATE_NOBITS_REGION feature
Sandrine Bailleux
authored
on 4 Feb 2020
TrustedFirmware Code Review
committed
on 4 Feb 2020
|
2020-01-29 |
Introduce COT build option
...
Allows to select the chain of trust to use when the Trusted Boot feature
is enabled. This affects both the cert_create tool and the firmware
itself.
Right now, the only available CoT is TBBR.
Change-Id: I7ab54e66508a1416cb3fcd3dfb0f055696763b3d
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Sandrine Bailleux
committed
on 29 Jan 2020
|
2020-01-27 |
plat/arm: Add support for SEPARATE_NOBITS_REGION
...
In order to support SEPARATE_NOBITS_REGION for Arm platforms, we need to load
BL31 PROGBITS into secure DRAM space and BL31 NOBITS into SRAM. Hence mandate
the build to require that ARM_BL31_IN_DRAM is enabled as well.
Naturally with SEPARATE_NOBITS_REGION enabled, the BL31 initialization code
cannot be reclaimed to be used for runtime data such as secondary cpu stacks.
Memory map for BL31 NOBITS region also has to be created.
Change-Id: Ibbc8c9499a32e63fd0957a6e254608fbf6fa90c9
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Madhukar Pappireddy
committed
on 27 Jan 2020
|
2020-01-23 |
Revert "plat/arm: Add support for SEPARATE_NOBITS_REGION"
...
This reverts commit d433bbd .
Change-Id: I46c69dce704a1ce1b50452dd4d62425c4a67f7f0
Mark Dykes
committed
on 23 Jan 2020
|
2020-01-21 |
plat/arm: Add support for SEPARATE_NOBITS_REGION
...
In order to support SEPARATE_NOBITS_REGION for Arm platforms, we need to load
BL31 PROGBITS into secure DRAM space and BL31 NOBITS into SRAM. Hence mandate
the build to require that ARM_BL31_IN_DRAM is enabled as well.
Naturally with SEPARATE_NOBITS_REGION enabled, the BL31 initialization code
cannot be reclaimed to be used for runtime data such as secondary cpu stacks.
Memory map for BL31 NOBITS region also has to be created.
Change-Id: Ibd480f82c1dc74e9cbb54eec07d7a8fecbf25433
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Madhukar Pappireddy
committed
on 21 Jan 2020
|
2019-12-20 |
spm: Remove SPM Alpha 1 prototype and support files
...
The Secure Partition Manager (SPM) prototype implementation is
being removed. This is preparatory work for putting in place a
dispatcher component that, in turn, enables partition managers
at S-EL2 / S-EL1.
This patch removes:
- The core service files (std_svc/spm)
- The Resource Descriptor headers (include/services)
- SPRT protocol support and service definitions
- SPCI protocol support and service definitions
Change-Id: Iaade6f6422eaf9a71187b1e2a4dffd7fb8766426
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Paul Beesley
authored
on 14 Oct 2019
Manish Pandey
committed
on 20 Dec 2019
|
Remove dependency between SPM_MM and ENABLE_SPM build flags
...
There are two different implementations of Secure Partition
management in TF-A. One is based on the "Management Mode" (MM)
design, the other is based on the Secure Partition Client Interface
(SPCI) specification. Currently there is a dependency between their
build flags that shouldn't exist, making further development
harder than it should be. This patch removes that
dependency, making the two flags function independently.
Before: ENABLE_SPM=1 is required for using either implementation.
By default, the SPCI-based implementation is enabled and
this is overridden if SPM_MM=1.
After: ENABLE_SPM=1 enables the SPCI-based implementation.
SPM_MM=1 enables the MM-based implementation.
The two build flags are mutually exclusive.
Note that the name of the ENABLE_SPM flag remains a bit
ambiguous - this will be improved in a subsequent patch. For this
patch the intention was to leave the name as-is so that it is
easier to track the changes that were made.
Change-Id: I8e64ee545d811c7000f27e8dc8ebb977d670608a
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Paul Beesley
authored
on 16 Sep 2019
Manish Pandey
committed
on 20 Dec 2019
|
2019-12-17 |
pmf: Make the runtime instrumentation work on AArch32
...
Ported the pmf asm macros and the asm code in the bl31 entrypoint
necessary for the instrumentation to AArch32.
Since smc dispatch is handled by the bl32 payload on AArch32, we
provide this service only if AARCH32_SP=sp_min is set.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Change-Id: Id33b7e9762ae86a4f4b40d7f1b37a90e5130c8ac
Bence Szépkúti
committed
on 17 Dec 2019
|
SiP: Don't validate entrypoint if state switch is impossible
...
Switching execution states is only possible if EL3 is AArch64.
As such there is no need to validate the entrypoint on AArch32 builds.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Change-Id: I3c1eb25b5df296a492870641d274bf65213c6608
Bence Szépkúti
committed
on 17 Dec 2019
|
2019-11-07 |
plat/arm: Re-enable PIE when RESET_TO_BL31=1
...
Earlier PIE support was enabled for all arm platforms when
RESET_TO_BL31=1, but later on it was restricted only to FVP with patch
SHA d4580d17 because of n1sdp platform.
Now it has been verified that PIE does work for n1sdp platform also, so
enabling it again for all arm platforms.
Change-Id: I05ad4f1775ef72e7cb578ec9245cde3fbce971a5
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Manish Pandey
committed
on 7 Nov 2019
|
2019-09-13 |
Refactor ARMv8.3 Pointer Authentication support code
...
This patch provides the following features and makes modifications
listed below:
- Individual APIAKey key generation for each CPU.
- New key generation on every BL31 warm boot and TSP CPU On event.
- Per-CPU storage of APIAKey added in percpu_data[]
of cpu_data structure.
- `plat_init_apiakey()` function replaced with `plat_init_apkey()`
which returns 128-bit value and uses Generic timer physical counter
value to increase the randomness of the generated key.
The new function can be used for generation of all ARMv8.3-PAuth keys
- ARMv8.3-PAuth specific code placed in `lib\extensions\pauth`.
- New `pauth_init_enable_el1()` and `pauth_init_enable_el3()` functions
generate, program and enable APIAKey_EL1 for EL1 and EL3 respectively;
pauth_disable_el1()` and `pauth_disable_el3()` functions disable
PAuth for EL1 and EL3 respectively;
`pauth_load_bl31_apiakey()` loads saved per-CPU APIAKey_EL1 from
cpu-data structure.
- Combined `save_gp_pauth_registers()` function replaces calls to
`save_gp_registers()` and `pauth_context_save()`;
`restore_gp_pauth_registers()` replaces `pauth_context_restore()`
and `restore_gp_registers()` calls.
- `restore_gp_registers_eret()` function removed with corresponding
code placed in `el3_exit()`.
- Fixed the issue when `pauth_t pauth_ctx` structure allocated space
for 12 uint64_t PAuth registers instead of 10 by removal of macro
CTX_PACGAKEY_END from `include/lib/el3_runtime/aarch64/context.h`
and assigning its value to CTX_PAUTH_REGS_END.
- Use of MODE_SP_ELX and MODE_SP_EL0 macro definitions
in `msr spsel` instruction instead of hard-coded values.
- Changes in documentation related to ARMv8.3-PAuth and ARMv8.5-BTI.
Change-Id: Id18b81cc46f52a783a7e6a09b9f149b6ce803211
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Alexei Fedorov
committed
on 13 Sep 2019
|
2019-06-28 |
Remove MULTI_CONSOLE_API flag and references to it
...
The new API becomes the default one.
Change-Id: Ic1d602da3dff4f4ebbcc158b885295c902a24fec
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Ambroise Vincent
committed
on 28 Jun 2019
|
2019-04-17 |
plat/arm: introduce wrapper functions to setup secure watchdog
...
The BL1 stage setup code for ARM platforms sets up the SP805 watchdog
controller as the secure watchdog. But not all ARM platforms use SP805
as the secure watchdog controller.
So introduce two new ARM platform code specific wrapper functions to
start and stop the secure watchdog. These functions then replace the
calls to SP805 driver in common BL1 setup code. All the ARM platforms
implement these wrapper functions by either calling into SP805 driver
or the SBSA watchdog driver.
Change-Id: I1a9a11b124cf3fac2a84f22ca40acd440a441257
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Aditya Angadi
committed
on 17 Apr 2019
|
2019-02-27 |
plat/arm: Implement ARMv8.3-PAuth interfaces
...
This feature is only supported on FVP.
Change-Id: I4e265610211d92a84bd2773c34acfbe02a1a1826
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 27 Feb 2019
|
2019-01-25 |
plat/arm: Sanitise includes
...
Use full include paths like it is done for common includes.
This cleanup was started in commit d40e0e08283a ("Sanitise includes
across codebase"), but it only cleaned common files and drivers. This
patch does the same to Arm platforms.
Change-Id: If982e6450bbe84dceb56d464e282bcf5d6d9ab9b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 25 Jan 2019
|
2019-01-22 |
SPM: Rename SPM_DEPRECATED flag to SPM_MM
...
The SPM implementation based on MM is going to be kept for the
foreseeable future.
Change-Id: I11e96778a4f52a1aa803e7e048d9a7cb24a53954
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Antonio Nino Diaz
committed
on 22 Jan 2019
|
2019-01-07 |
plat/arm: Restrict PIE support to FVP
...
The patch SHA 55cf015c enabled PIE support when RESET_TO_BL31=1 for
all ARM platforms. But it seems n1sdp platform doesn't work with PIE
support yet. Hence restrict the ENABLE_PIE=1 to fvp platform.
Change-Id: If44e42528e4b0b57c69084503f346576fe0748bd
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Soby Mathew
committed
on 7 Jan 2019
|
2018-12-19 |
plat/arm: Remove comment that mentions LOAD_IMAGE_V2
...
This option was removed in v2.0.
Change-Id: I0c929fddb57d60c5eff9e45dd5ee8c636b28e6c3
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 19 Dec 2018
|
2018-12-11 |
SPM: Load image and RD from SP package
...
Load SP and RD from package instead of relying on RD being already
loaded in memory and the SP being loaded as a BL32 image.
Change-Id: I18d4fbf4597656c6a7e878e1d7c01a8a324f3f8a
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 11 Dec 2018
|