Merge pull request #1702 from MISL-EBU-System-SW/patches-18.12 ...

Update code with latest changes from Marvell LSP 18.12

ble: ap807: Switch to PLL mode and update CPU frequency ...

- Update CPU frequency on AP807 to 2GHz for SAR 0x0.
- Increase AVS to 0.88V for 2GHz clock

Change-Id: Ic945b682ab2f8543e34294bfc56c3eae2c5e0c8e
Signed-off-by: Christine Gharzuzi <chrisg@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

mvebu: cp110: avoid pcie power on/off sequence when called from Linux ...

In Armada 8K DB boards, PCIe initialization can be executed only once
because PCIe reset performed during chip power on and it cannot be
executed via GPIO later.
This means that power on can be executed only once, when it's called
from the bootloader.
Power on:
	Read bit 21 of the mode, it marks if the caller is
	the bootloader or the Linux Kernel.
Power off:
	Check if the comphy was already configured to PCIe, if yes,
	check if the caller is bootloader, if both conditions are true
	(PCIe mode and called by Linux) - skip the power-off.

In addition, fix incorrect documentation describing mode fields -
PCIe width is 3 bits, not 2.

NOTE: with this patch, please use LK4.14.76 (LK4.4.120 may not work
with it).

Change-Id: I4b929011f97a0a1869a51ba378687e78b3eca4ff
Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

mvebu: cp110: fix phy selector configuration for XFI1 ...

Extended phy selector configuration about XFI1 mode.

Change-Id: I1309770bbb5fdbfb0127b6f12ee78974d1d6b19f
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>

Merge pull request #1698 from hzhuang1/rm_emmc_delay ...

Rm emmc delay

Merge pull request #1679 from pangupta/master ...

ccn: Introduce API to set and read value of node register

mmc: poll eMMC status after EXT_CSD command ...

EXT_CSD command needs to access data from eMMC device. Add the
operation of polling eMMC device status. Make sure the command is
finished.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

ccn: Introduce API to set and read value of node register ...

Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>

drivers/tzc-dmc620: add driver to setup DMC-620 TZC controller ...

ARM CoreLink DMC-620 Dynamic Memory Controller includes a TZC controller
to setup secure or non-secure regions of DRAM memory. The TZC controller
allows to setup upto eight such regions of memory in DRAM. This driver
provides helper functions to setup the TZC controller within DMC-620.

Change-Id: Iee7692417c2080052bdb7b1c2873a024bc5d1d10
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

Merge pull request #1682 from MISL-EBU-System-SW/migrate-multi-console ...

Marvell: Migrate to multi console API

plat/marvell: Migrate to multi-console API ...

Migrate Marvell platforms from legacy console API to
multi-console API.

Change-Id: I647f5f49148b463a257a747af05b5f0c967f267c
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

drivers: st: uart: remove old API ...

Now that MULTI_CONSOLE_API is enabled for the STM32MP1 platform,
we can remove the non MULTI_CONSOLE_API parts in the driver.

Signed-off-by: Yann Gautier <yann.gautier@st.com>

drivers: st: update console driver to support MULTI_CONSOLE_API ...

Signed-off-by: Yann Gautier <yann.gautier@st.com>

stm32mp1: add a new file for UART registers definition ...

Signed-off-by: Yann Gautier <yann.gautier@st.com>

Merge pull request #1676 from Yann-lms/static_analysis ...

Correct some issues found with static analysis tools

cadence: uart: comply to console_register prototype ...

Signed-off-by: Alexei Colin <acolin@isi.edu>

stm32mp1: correct some static analysis tools issues ...

These issues wer found by sparse:

drivers/st/clk/stm32mp1_clk.c:1524:19:
 warning: incorrect type in assignment (different base types)
    expected restricted fdt32_t const [usertype] *pkcs_cell
    got unsigned int const [usertype] *

plat/st/stm32mp1/plat_image_load.c:13:6:
 warning: symbol 'plat_flush_next_bl_params' was not declared.
 Should it be static?
plat/st/stm32mp1/plat_image_load.c:21:16:
 warning: symbol 'plat_get_bl_image_load_info' was not declared.
 Should it be static?
plat/st/stm32mp1/plat_image_load.c:29:13:
 warning: symbol 'plat_get_next_bl_params' was not declared.
 Should it be static?

plat/st/stm32mp1/bl2_io_storage.c:40:10:
 warning: symbol 'block_buffer' was not declared. Should it be static?

Signed-off-by: Yann Gautier <yann.gautier@st.com>

drivers: partition: correct some static analysis tools issues ...

cppcheck:
[drivers/partition/gpt.c:19] -> [drivers/partition/gpt.c:19]:
 (warning) Either the condition 'str_in!=((void*)0)' is redundant
 or there is possible null pointer dereference: name.

sparse:
drivers/partition/gpt.c:39:9:
 warning: Using plain integer as NULL pointer

Signed-off-by: Yann Gautier <yann.gautier@st.com>

Standardise header guards across codebase ...

All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.

The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.

The exceptions are files that are imported from other projects:

- CryptoCell driver
- dt-bindings folders
- zlib headers

Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Merge pull request #1668 from ldts/rcar_gen3/e3_build ...

rcar_gen3: E3 target: fix compilation issues

Remove _tzc_get_max_top_addr() function ...

This function was needed at the time where we didn't have the
compiler_rt lib. An AArch32-specific variant was provided to handle
the 64-bit shift operation in 32-bit. This is no longer needed.

Change-Id: Ibab709a95e3a723ae2eeaddf873dba70ff2012b3
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

rcar_gen3: E3 target: fix compilation issues ...

Target builds but has not been tested.

Signed-off-by: ldts <jorge.ramirez.ortiz@gmail.com>

Merge pull request #1623 from MISL-EBU-System-SW/a3700-support ...

Add support for Armada 3700 and COMPHY porting layer

Merge pull request #1646 from Andre-ARM/allwinner/pmic-v2 ...

Allwinner/pmic v2

meson: console: Add missing define to fix build ...

It isn't possible to build this driver without adding this define.

Change-Id: Iba2ced411cd8ce438787871fa01b414d32b9aa42
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

meson: console: Introduce console driver ...

It has only been tested with a system clock of 24 MHz.

It has only been implemented for the multi console API.

Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Merge pull request #1640 from soby-mathew/sm/fin_con_reg ...

Multi-console: Deprecate the `finish_console_register` macro

tzc: Fix MISRA defects ...

The definitions FAIL_CONTROL_*_SHIFT were incorrect, they have been
fixed.

The types tzc_region_attributes_t and tzc_action_t have been removed and
replaced by unsigned int because it is not allowed to do logical
operations on enums.

Also, fix some address definitions in arm_def.h.

Change-Id: Id37941d76883f9fe5045a5f0a4224c133c504d8b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

drivers: marvell Add support for Armada-37xx UART ...

Introduce driver for Marvell Armada-37xx UART console

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

drivers: marvell Add Armada-37xx COMPHY driver ...

Add support for Marvell Armada-3700 COMPHY driver

Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>