2019-01-18 |
stm32mp1: add BSEC driver
...
The BSEC (Boot and Security and OTP control) is intended to control an OTP
(one time programmable) fuse box, used for on-chip non-volatile storage
for device configuration and security parameters.
Change-Id: I38c44684c7b9c6a1f24ec0ae3fe99cec481d5a51
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Mathieu Belou <mathieu.belou@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Yann Gautier
committed
on 18 Jan 2019
|
stm32mp1: update device tree and gpio functions
...
Change fdt_check_status function to fdt_get_status.
Update GPIO defines.
Move some functions in gpio driver, instead of dt helper file.
Add GPIO bank helper functions.
Use only one status field in dt_node_info structure including both status
and secure status.
Change-Id: I34f93408dd4aac16ae722f564bc3f7d6ae978cf4
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Yann Gautier
committed
on 18 Jan 2019
|
drivers: st: update drivers code
...
Reword some traces.
Use uintptr_t where required.
Reduce scope of variables.
Improve io_stm32image algo.
Complete some IP registers definitions.
Add failure on supported DDR (stm32mp1_ddr_init()).
Fix cache flush on cache disable (stm32mp1_ddr_setup).
Change-Id: Ie02fa71e02b9d69abc807fd5b7df233e5be6668c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Yann Gautier
committed
on 18 Jan 2019
|
drivers: st: pmic: update stpmic1 driver
...
Change-Id: I4a1b281925e0a3a1e2a34b3e363537e4a7f13823
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Yann Gautier
committed
on 18 Jan 2019
|
stm32mp1: update device tree files
...
The drivers are also updated to reflect the changes.
Set RCC as non-secure.
Change-Id: I568fa1f418355830ad1d4d1cdcdb910fb362231b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Yann Gautier
committed
on 18 Jan 2019
|
stm32mp1: rename stpmu1 to stpmic1
...
This is the correct name of the IP.
Rename stm32mp1_pmic files to stm32mp_pmic.
Change-Id: I238a7d1f9a1d099daf7788dc9ebbd3146ba2f15f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Yann Gautier
committed
on 18 Jan 2019
|
drivers: st: move i2c driver in its own folder
...
The driver could be used for other devices than PMIC.
Change-Id: I4569e7c0028e52e1ff2fe9d38f11de11e95d1897
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Yann Gautier
committed
on 18 Jan 2019
|
2019-01-15 |
Correct typographical errors
...
Corrects typos in core code, documentation files, drivers, Arm
platforms and services.
None of the corrections affect code; changes are limited to comments
and other documentation.
Change-Id: I5c1027b06ef149864f315ccc0ea473e2a16bfd1d
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Paul Beesley
committed
on 15 Jan 2019
|
2019-01-10 |
Merge pull request #1724 from jbech-linaro/emmc_enumeration
...
mmc: increase delay when initializing mmc
Antonio Niño Díaz
authored
on 10 Jan 2019
GitHub
committed
on 10 Jan 2019
|
2019-01-08 |
rcar_gen3: drivers: pwrc: Switch to common delay implementation
...
Replace the ad-hoc implementation of delay in PWRC driver
with common R-Car delay code.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Marek Vasut
committed
on 8 Jan 2019
|
rcar_gen3: drivers: delay: Rewrite from assembler to C
...
Rewrite the delay code from assembler to C.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Marek Vasut
committed
on 8 Jan 2019
|
rcar_gen3: drivers: scif: Use TEND flag for transmission end detection
...
Use the SCIF SCFSR:TEND bit to check that all data were transmitted by
the SCIF and that there are no more valid data to transmit in the FIFO.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Marek Vasut
committed
on 8 Jan 2019
|
rcar_gen3: drivers: qos: Synchronize tables
...
Synchronize the QoS tables with Renesas ATF release 2.0.0 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Marek Vasut
committed
on 8 Jan 2019
|
rcar_gen3: drivers: pfc: Synchronize tables
...
Synchronize the pin control tables with Renesas ATF release 2.0.0 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Marek Vasut
committed
on 8 Jan 2019
|
rcar_gen3: drivers: ddr-b: Synchronize tables
...
Synchronize the R-Car DDR-B driver, used on R-Car H3/M3W/M3N,
with Renesas ATF release 2.0.0 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Marek Vasut
committed
on 8 Jan 2019
|
rcar_gen3: drivers: ddr-a: Checkpatch cleanup
...
Run Linux kernel checkpatch on the DDR-A init code to clean it up:
$ checkpatch.pl --fix --fix-inplace -f drivers/staging/renesas/rcar/ddr/ddr_a/*
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Marek Vasut
committed
on 8 Jan 2019
|
rcar_gen3: drivers: ddr-a: Synchronize tables
...
Synchronize the R-Car DDR-A driver, used on R-Car E3,
with Renesas ATF release 2.0.0 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Marek Vasut
committed
on 8 Jan 2019
|
rcar_gen3: drivers: cpld: Move rcar_cpld_reset_cpu() into header
...
Move the rcar_cpld_reset_cpu() function into header file and zap the externs.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Marek Vasut
committed
on 8 Jan 2019
|
rcar_gen3: drivers: swdt: Access SCR in EL3
...
The code runs in EL3, use EL3 accessors to manipulate the interrupt bit.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Marek Vasut
committed
on 8 Jan 2019
|
rcar_gen3: drivers: auth-mod: Access SCTLR in EL3
...
The code runs in EL3, use EL3 accessors to manipulate the cache bits.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Marek Vasut
committed
on 8 Jan 2019
|
rcar_gen3: plat: Clean up rcar_pwrc_code_copy_to_system_ram()
...
Call the function only from architecture setup and at the end of
suspend cycle instead of calling it all over the place.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Marek Vasut
committed
on 8 Jan 2019
|
rcar_gen3: plat: Drop ddr_regdef_len()
...
This function is unused and triggers clang error, drop it.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Marek Vasut
committed
on 8 Jan 2019
|
2019-01-07 |
stm32mp1: do not include platform header files directly in drivers
...
Instead, only platform_def.h is included.
The required files to be included are added in stm32mp1_def.h.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Yann Gautier
committed
on 7 Jan 2019
|
2019-01-04 |
Sanitise includes across codebase
...
Enforce full include path for includes. Deprecate old paths.
The following folders inside include/lib have been left unchanged:
- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}
The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).
For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").
This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.
Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.
Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 4 Jan 2019
|
2018-12-18 |
mmc: increase delay when initializing mmc
...
Running TF-A 2.0 and later seems to cause a regression on HiKey 620.
NOTICE: BL2: v2.0(release):v2.0
NOTICE: BL2: Built : 17:41:23, Dec 17 2018
NOTICE: acpu_dvfs_set_freq: set acpu freq success!ERROR: CMD1 failed after 100 retries
ERROR: BL2: Failed to load image (-5)
The reason seems to be that during emmc enumeration when BL2 sends the command
OCR_SECTOR_MODE | OCR_VDD_MIN_2V7 | OCR_VDD_MIN_1V7
it for some reason takes some more time to get a reply. So a delay with
mdelay(1), seems to not be enough any longer and therefore we increase it to
mdelay(10) instead which makes the device boot as expected again.
Signed-off-by: Joakim Bech <joakim.bech@linaro.org>
Joakim Bech
committed
on 18 Dec 2018
|
2018-12-12 |
Merge pull request #1708 from Yann-lms/warnings
...
Add possibility to add compilation warnings
Soby Mathew
authored
on 12 Dec 2018
GitHub
committed
on 12 Dec 2018
|
Merge pull request #1715 from pangupta/master
...
ccn: for RN-I, used node id instead of node postion
Soby Mathew
authored
on 12 Dec 2018
GitHub
committed
on 12 Dec 2018
|
2018-12-11 |
ccn: for RN-I, used node id instead of node postion
...
For RN-I, node id is used instead of node postion in the bitmap
to calculate the region id.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Pankaj Gupta
committed
on 11 Dec 2018
|
2018-12-10 |
io_block: define MAX_IO_BLOCK_DEVICES as unsigned
...
This is used as a table index, and already compared with an unsigned int:
block_dev_count.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Yann Gautier
committed
on 10 Dec 2018
|
Merge pull request #1700 from jwerner-chromium/JW_crashfix
...
MULTI_CONSOLE_API fixes and cleanups
Soby Mathew
authored
on 10 Dec 2018
GitHub
committed
on 10 Dec 2018
|