2019-01-15 |
Move BL1 and BL2 private defines to bl_common.h
...
The definitions in bl1/bl1_private.h and bl2/bl2_private.h are useful for
platforms that may need to access them.
Change-Id: Ifd1880f855ddafcb3bfcaf1ed4a4e0f121eda174
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 15 Jan 2019
|
2019-01-10 |
hikey960:Corrected erroneous DDR_SIZE
...
Change-Id: I7194a9a5f0e41308eb3242d20c0d3434f72da591
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
Joel Hutton
committed
on 10 Jan 2019
|
hikey960: Increase max xlat tables
...
It is cleaner to use the same number of tables regardless of whether
OP-TEE is used or not. This doesn't result in a significant memory
usage increase.
Change-Id: I38bcaa3f2f197c0a352153117592749f189a265c
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
Joel Hutton
committed
on 10 Jan 2019
|
2019-01-04 |
Sanitise includes across codebase
...
Enforce full include path for includes. Deprecate old paths.
The following folders inside include/lib have been left unchanged:
- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}
The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).
For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").
This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.
Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.
Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 4 Jan 2019
|
2018-12-10 |
io_block: define MAX_IO_BLOCK_DEVICES as unsigned
...
This is used as a table index, and already compared with an unsigned int:
block_dev_count.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Yann Gautier
committed
on 10 Dec 2018
|
2018-11-29 |
hikey960: initialize EDMAC and channels
...
This is needed to utilize the DMA controller on the hikey960
Signed-off-by: Ryan Grachek <ryan@edited.us>
Ryan Grachek
committed
on 29 Nov 2018
|
2018-11-12 |
Merge pull request #1674 from jforissier/hisi-multi-console
...
hikey, hikey960, poplar: use new console APIs
Antonio Niño Díaz
authored
on 12 Nov 2018
GitHub
committed
on 12 Nov 2018
|
2018-11-08 |
hikey960: Use new console APIs
...
Switch to the new console APIs enabled by setting MULTI_CONSOLE_API=1.
Enables building with ERROR_DEPRECATED=1.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Jerome Forissier
committed
on 8 Nov 2018
|
Standardise header guards across codebase
...
All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.
The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.
The exceptions are files that are imported from other projects:
- CryptoCell driver
- dt-bindings folders
- zlib headers
Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 8 Nov 2018
|
2018-11-01 |
context_mgmt: Fix MISRA defects
...
The macro EL_IMPLEMENTED() has been deprecated in favour of the new
function el_implemented().
Change-Id: Ic9b1b81480b5e019b50a050e8c1a199991bf0ca9
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 1 Nov 2018
|
2018-10-25 |
Add plat_crash_console_flush to platforms without it
...
Even though at this point plat_crash_console_flush is optional, it will
stop being optional in a following patch.
The console driver of warp7 doesn't support flush, so the implementation
is a placeholder.
TI had ``plat_crash_console_init`` and ``plat_crash_console_putc``, but
they weren't global so they weren't actually used. Also, they were
calling the wrong functions.
imx8_helpers.S only has placeholders for all of the functions.
Change-Id: I8d17bbf37c7dad74e134c61ceb92acb9af497718
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 25 Oct 2018
|
2018-10-02 |
Merge pull request #1587 from antonio-nino-diaz-arm/an/deprecated
...
Remove deprecated interfaces for all platforms
Soby Mathew
authored
on 2 Oct 2018
GitHub
committed
on 2 Oct 2018
|
2018-09-28 |
hikey960: Migrate to new interfaces
...
- Migrate to new GIC interfaces.
- Remove unused bl1_init_bl2_mem_layout().
- Migrate to bl31_early_platform_setup2().
- Use PLAT_VIRT_ADDR_SPACE_SIZE and PLAT_PHY_ADDR_SPACE_SIZE.
- Remove references to removed build options.
- Update Makefile paths.
Change-Id: I583fd893555e6535f32d87ed67bbae430b8e6afe
Tested-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 28 Sep 2018
|
2018-09-26 |
hikey960: fix build issue for clang
...
plat/hisilicon/hikey960/include/plat_macros.S:19:55: error: unexpected token in
'.asciz' directive
.asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n" " Offset:\t\t\tvalue\n"
^
Makefile:720: recipe for target 'build/hikey960/debug/bl1/cortex_a53.o' failed
make: *** [build/hikey960/debug/bl1/cortex_a53.o] Error 1
Merge the two lines into one.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Haojian Zhuang
committed
on 26 Sep 2018
|
2018-09-09 |
hikey960: Add development TBB support
...
This patch adds experimental support for TBB to the HiKey960 board. To
build and test with TBB modify the uefi-tools project platforms.config
+ATF_BUILDFLAGS=TRUSTED_BOARD_BOOT=1 GENERATE_COT=1 SAVE_KEYS=1 \
MBEDTLS_DIR=./mbedtls
Signed-off-by: Teddy Reed <teddy@casualhacking.io>
Teddy Reed
committed
on 9 Sep 2018
|
2018-07-27 |
Merge pull request #1494 from hzhuang1/pcie_pin
...
Hikey960: configure pins for PCIe controller
Soby Mathew
authored
on 27 Jul 2018
GitHub
committed
on 27 Jul 2018
|
Hikey960: configure pins for PCIe controller
...
GPIO_089 connects to PCIE_PERST_N. It needs to be configured as
output low.
Signed-off-by: Kaihua Zhong <zhongkaihua@huawei.com>
Signed-off-by: Xiaowei Song <songxiaowei@hisilicon.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Kaihua Zhong
authored
on 16 Jul 2018
Haojian Zhuang
committed
on 27 Jul 2018
|
2018-07-20 |
PSCI: Fix types of definitions
...
Also change header guards to fix defects of MISRA C-2012 Rule 21.1.
Change-Id: Ied0d4b0e557ef6119ab669d106d2ac5d99620c57
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 20 Jul 2018
|
2018-03-29 |
Merge pull request #1313 from jonathanwright-ARM/jw/MISRA-switch-statements
...
Fix switch statements to comply with MISRA rules
Dimitris Papastamos
authored
on 29 Mar 2018
GitHub
committed
on 29 Mar 2018
|
Merge pull request #1331 from hzhuang1/reboot_delay
...
hikey960: add delay before reset
Dimitris Papastamos
authored
on 29 Mar 2018
GitHub
committed
on 29 Mar 2018
|
2018-03-27 |
hikey960: add delay before reset
...
If system is still accessing storage device, reboot operation
may cause data broken. So add the flush and delay operation
before system reset.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Haojian Zhuang
committed
on 27 Mar 2018
|
Clean usage of void pointers to access symbols
...
Void pointers have been used to access linker symbols, by declaring an
extern pointer, then taking the address of it. This limits symbols
values to aligned pointer values. To remove this restriction an
IMPORT_SYM macro has been introduced, which declares it as a char
pointer and casts it to the required type.
Change-Id: I89877fc3b13ed311817bb8ba79d4872b89bfd3b0
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
Joel Hutton
committed
on 27 Mar 2018
|
2018-03-26 |
plat: fix switch statements to comply with MISRA rules
...
Ensure (where possible) that switch statements in plat comply with MISRA
rules 16.1 - 16.7.
Change-Id: Ie4a7d2fd10f6141c0cfb89317ea28a755391622f
Signed-off-by: Jonathan Wright <jonathan.wright@arm.com>
Jonathan Wright
committed
on 26 Mar 2018
|
2018-03-08 |
Merge pull request #1277 from hzhuang1/testing/bl2_el3_v0.6
...
hikey: migrate to BL2_EL3
davidcunado-arm
authored
on 8 Mar 2018
GitHub
committed
on 8 Mar 2018
|
2018-03-06 |
hikey960: fix build issue with CLANG
...
plat/hisilicon/hikey960/drivers/pwrc/hisi_pwrc.c:290:20:
error: unused function 'hisi_pdc_set_intmask' [-Werror,-Wunused-function]
static inline void hisi_pdc_set_intmask(void *pdc_base_addr,
^
1 error generated.
Makefile:605: recipe for target 'build/hikey960/release/bl31/hisi_pwrc.o' failed
make: *** [build/hikey960/release/bl31/hisi_pwrc.o] Error 1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Haojian Zhuang
committed
on 6 Mar 2018
|
2018-03-05 |
hikey960: move out duplicated code
...
Create hikey960_bl_common.c to store duplication initialization
code in both BL1 and BL2.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Haojian Zhuang
committed
on 5 Mar 2018
|
hikey960: fix invoking driver init in image load driver
...
It's unnecessary to call platform driver initialization in image
load driver. We could make bl2_platform_setup() to executing
just before SCP_BL2 by setting flag IMAGE_ATTRIB_PLAT_SETUP.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Haojian Zhuang
committed
on 5 Mar 2018
|
hikey960: migrate to bl2_el3
...
Since non-TF ROM is used in HiKey960 platform (Hisilicon Hi3660 SoC),
replace BL1 by BL2_EL3 in normal boot mode.
When flush images in recovery mode, keep to use BL1.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Haojian Zhuang
committed
on 5 Mar 2018
|
hikey960: drop LOAD_IMAGE v1
...
Since LOAD_IMAGE_V2 is always enabled in HiKey960 platform. Drop
LOAD_IMAGE v1 to simplify code.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Haojian Zhuang
committed
on 5 Mar 2018
|
hikey960: fix memory overlapped in memory map
...
MAP_TSP_MEM could be either in SRAM or DRAM. When MAP_TSP_MEM is in
DRAM, it's overlapped with MAP_DDR.
Since TSP_MEM is always configured in DRAM case, it means
MAP_OPTEE_PAGEABLE is always disabled. Just remove it.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Haojian Zhuang
committed
on 5 Mar 2018
|