MHU doorbell driver requires arm platform specific
macro "PLAT_CSS_MHU_BASE".
Rename it to "PLAT_MHUV2_BASE", so that platforms other than arm
can use generic MHU doorbell driver.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>

Enable the SCMI protocol support in SynQuacer platform.
Aside from power domain, system power and apcore management protocol,
this commit adds the vendor specific protocol(0x80).
This vendor specific protocol is used to get the dram mapping information
from SCP.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>

Enable the deprecated SPM framework for the SynQuacer platform.
It involves creating a memory layout in secure DRAM, and wiring
up the SPM infrastructure so that the secure partition payload
that is loaded into this region by the SCP firmware is dispatched
appropriately.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

The logic that initializes the BL32 entry point data structure
should only be executed if we are in fact loading OP-TEE, and
not if BL32_BASE is set for other reasons (i.e., when enabling
SPM)

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Also change header guards to fix defects of MISRA C-2012 Rule 21.1.

Change-Id: Ied0d4b0e557ef6119ab669d106d2ac5d99620c57
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

PSCI framework uses SCPI driver to communicate to SCP firmware for
various power management operations. Following PSCI operations are
supported:
- CPU ON
- CPU OFF
- CPU STANDBY
- SYSTEM RESET
- SYSTEM OFF

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

Retrieve DRAM info from SCP firmware using SCPI driver. Board supports
multiple DRAM slots so its required to fetch DRAM info from SCP firmware
and pass this info to UEFI via non-secure SRAM.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

Add System Control and Power Interface (SCPI) driver which provides APIs
for PSCI framework to work. SCPI driver uses MHU driver APIs to communicate
with SCP firmware for various system control and power operations.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

Add Message Handling Unit (MHU) driver used to communicate among
Application Processors (AP) and System Control Processor (SCP).

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

BL31 runs from SRAM which is a non-coherent memory on synquacer. So
enable MMU with SRAM memory marked as Non-Cacheable and mark page tables
kept on SRAM as Non-Cacheable via XLAT_TABLE_NC flag. Also add page tables
for Device address space.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

synquacer uses GICv3 compliant GIC500. So enable proper GICv3 driver
initialization.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

synquacer has CCN-512 interconnect. So enable proper CCN driver
initialization.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

These functions describe the layout of the cores and clusters in order
to support the PSCI framework.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

synquacer supports direct entry to BL31 without BL1 and BL2 as
SCP firmware does similar work. So this patch adds BL31 stub APIs.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>