2019-02-04 |
Merge pull request #1803 from sandrine-bailleux-arm/sb/arm-bl33-fixes
...
Fixes related to BL33 image on Arm platforms
Antonio Niño Díaz
authored
on 4 Feb 2019
GitHub
committed
on 4 Feb 2019
|
Merge pull request #1796 from grandpaul/rpi3-sdhost-driver
...
RPi3 SDHost driver
Antonio Niño Díaz
authored
on 4 Feb 2019
GitHub
committed
on 4 Feb 2019
|
2019-02-01 |
Arm platforms: Rename PLAT_ARM_NS_IMAGE_OFFSET
...
PLAT_ARM_NS_IMAGE_OFFSET is in fact not an offset relative to some base
address, it is an absolute address. Rename it to avoid any confusion.
Change-Id: I1f7f5e8553cb267786afe7e5f3cd4d665b610d3f
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Sandrine Bailleux
committed
on 1 Feb 2019
|
2019-01-31 |
rpi3: Add SDHost driver
...
This commit adds SDHost driver for RaspberryPi3. SDHost driver uses the
GPIO driver to connect the SDCard and SDHost. By using this driver it is
able to read/write raw blocks on SDCard.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Ying-Chun Liu (PaulLiu)
committed
on 31 Jan 2019
|
Remove dead code related to LOAD_IMAGE_V2=0
...
Commit ed51b51f7a9163a ("Remove build option LOAD_IMAGE_V2") intended
to remove all code related to LOAD_IMAGE_V2=0 but missed a few things.
Change-Id: I16aaf52779dd4af1e134e682731328c5f1e5d622
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Sandrine Bailleux
committed
on 31 Jan 2019
|
Merge pull request #1797 from antonio-nino-diaz-arm/an/remove-smccc-v2
...
Remove support for the SMC Calling Convention 2.0
Antonio Niño Díaz
authored
on 31 Jan 2019
GitHub
committed
on 31 Jan 2019
|
Merge pull request #1792 from satheesbalya-arm/sb1/sb1_2159_v84_xlat
...
lib/xlat_tables: Add support for ARMv8.4-TTST
Antonio Niño Díaz
authored
on 31 Jan 2019
GitHub
committed
on 31 Jan 2019
|
2019-01-30 |
Remove support for the SMC Calling Convention 2.0
...
This reverts commit 2f370465241c ("Add support for the SMC Calling
Convention 2.0").
SMCCC v2.0 is no longer required for SPM, and won't be needed in the
future. Removing it makes the SMC handling code less complicated.
The SPM implementation based on SPCI and SPRT was using it, but it has
been adapted to SMCCC v1.0.
Change-Id: I36795b91857b2b9c00437cfbfed04b3c1627f578
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 30 Jan 2019
|
lib/xlat_tables: Add support for ARMv8.4-TTST
...
ARMv8.4-TTST (Small Translation tables) relaxes the lower limit on the
size of translation tables by increasing the maximum permitted value
of the T1SZ and T0SZ fields in TCR_EL1, TCR_EL2, TCR_EL3, VTCR_EL2 and
VSTCR_EL2.
This feature is supported in AArch64 state only.
This patch adds support for this feature to both versions of the
translation tables library. It also removes the static build time
checks for virtual address space size checks to runtime assertions.
Change-Id: I4e8cebc197ec1c2092dc7d307486616786e6c093
Signed-off-by: Sathees Balya <sathees.balya@arm.com>
Sathees Balya
committed
on 30 Jan 2019
|
2019-01-28 |
Merge pull request #1773 from grandpaul/rpi3-gpio-driver
...
Rpi3 gpio driver
Antonio Niño Díaz
authored
on 28 Jan 2019
GitHub
committed
on 28 Jan 2019
|
2019-01-25 |
rpi3: Add GPIO driver
...
This commit adds GPIO driver for RaspberryPi3. The GPIO driver for RPi3
also provides the way to do pinmux selections.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Ying-Chun Liu (PaulLiu)
committed
on 25 Jan 2019
|
fvp: pwrc: Move to drivers/ folder
...
Change-Id: I670ea80e0331c2d4b2ccfa563a45469a43f6902d
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 25 Jan 2019
|
plat/arm: sds: Move to drivers/ folder
...
Change-Id: Ia601d5ad65ab199e747fb60af4979b7db477d249
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 25 Jan 2019
|
plat/arm: scp: Move to drivers/ folder
...
Change-Id: Ida5dae39478654405d0ee31a6cbddb4579e76a7f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 25 Jan 2019
|
plat/arm: scpi: Move to drivers/ folder
...
Change-Id: Icc59cdaf2b56f6936e9847f1894594c671db2e94
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 25 Jan 2019
|
plat/arm: mhu: Move to drivers/ folder
...
Change-Id: I656753a1825ea7340a3708b950fa6b57455e9056
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 25 Jan 2019
|
plat/arm: scmi: Move to drivers/ folder
...
Change-Id: I8989d2aa0258bf3b50a856c5b81532d578600124
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 25 Jan 2019
|
plat/arm: Sanitise includes
...
Use full include paths like it is done for common includes.
This cleanup was started in commit d40e0e08283a ("Sanitise includes
across codebase"), but it only cleaned common files and drivers. This
patch does the same to Arm platforms.
Change-Id: If982e6450bbe84dceb56d464e282bcf5d6d9ab9b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Antonio Nino Diaz
committed
on 25 Jan 2019
|
Merge pull request #1761 from satheesbalya-arm/sb1/sb1_2661_bl31_overlay
...
plat/arm: Save BL2 descriptors to reserved memory.
Antonio Niño Díaz
authored
on 25 Jan 2019
GitHub
committed
on 25 Jan 2019
|
Merge pull request #1777 from glneo/runtime-gicr
...
ti: k3: common: Add support for runtime detection of GICR base address
Antonio Niño Díaz
authored
on 25 Jan 2019
GitHub
committed
on 25 Jan 2019
|
2019-01-23 |
Helper function to read ID_AFR0_EL1 system register
...
This patch provides helper function to read the ID_AFR0_EL1
system register for platforms.
Change-Id: Id5491b18e3bf9f619d98d6cc8efd9d2cf5918c9d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Varun Wadekar
committed
on 23 Jan 2019
|
plat/arm: Save BL2 descriptors to reserved memory.
...
On ARM platforms, the BL2 memory can be overlaid by BL31/BL32. The memory
descriptors describing the list of executable images are created in BL2
R/W memory, which could be possibly corrupted later on by BL31/BL32 due
to overlay. This patch creates a reserved location in SRAM for these
descriptors and are copied over by BL2 before handing over to next BL
image.
Also this patch increases the PLAT_ARM_MAX_BL2_SIZE for juno when TBBR
is enabled.
Fixes ARM-Software/tf-issues#626
Change-Id: I755735706fa702024b4032f51ed4895b3687377f
Signed-off-by: Sathees Balya <sathees.balya@arm.com>
Sathees Balya
committed
on 23 Jan 2019
|
2019-01-22 |
ti: k3: common: Add support for runtime detection of GICR base address
...
Valid addresses for GICR base are always a set calculable distance from
the GICD and is based on the number of cores a given instance of GICv3 IP
can support. The formula for the number of address bits is given by the
ARM GIC-500 TRM section 3.2 as 2^(18+log2(cores)) with the MSB set to
one for GICR instances. Holes in the GIC address space are also
guaranteed to safely return 0 on reads. This allows us to support runtime
detection of the GICR base address by starting from GIC base address plus
BIT(18) and walking until the GICR ID register (IIDR) is detected. We
stop searching after BIT(20) to prevent searching out into space if
something goes wrong. This can be extended out if we ever have a device
with 16 or more cores.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Andrew F. Davis
committed
on 22 Jan 2019
|
SPM: Rename SPM_DEPRECATED flag to SPM_MM
...
The SPM implementation based on MM is going to be kept for the
foreseeable future.
Change-Id: I11e96778a4f52a1aa803e7e048d9a7cb24a53954
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Antonio Nino Diaz
committed
on 22 Jan 2019
|
2019-01-18 |
stm32mp1: add BSEC driver
...
The BSEC (Boot and Security and OTP control) is intended to control an OTP
(one time programmable) fuse box, used for on-chip non-volatile storage
for device configuration and security parameters.
Change-Id: I38c44684c7b9c6a1f24ec0ae3fe99cec481d5a51
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Mathieu Belou <mathieu.belou@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Yann Gautier
committed
on 18 Jan 2019
|
stm32mp1: update device tree and gpio functions
...
Change fdt_check_status function to fdt_get_status.
Update GPIO defines.
Move some functions in gpio driver, instead of dt helper file.
Add GPIO bank helper functions.
Use only one status field in dt_node_info structure including both status
and secure status.
Change-Id: I34f93408dd4aac16ae722f564bc3f7d6ae978cf4
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Yann Gautier
committed
on 18 Jan 2019
|
drivers: st: update drivers code
...
Reword some traces.
Use uintptr_t where required.
Reduce scope of variables.
Improve io_stm32image algo.
Complete some IP registers definitions.
Add failure on supported DDR (stm32mp1_ddr_init()).
Fix cache flush on cache disable (stm32mp1_ddr_setup).
Change-Id: Ie02fa71e02b9d69abc807fd5b7df233e5be6668c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Yann Gautier
committed
on 18 Jan 2019
|
drivers: st: pmic: update stpmic1 driver
...
Change-Id: I4a1b281925e0a3a1e2a34b3e363537e4a7f13823
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Yann Gautier
committed
on 18 Jan 2019
|
stm32mp1: update device tree files
...
The drivers are also updated to reflect the changes.
Set RCC as non-secure.
Change-Id: I568fa1f418355830ad1d4d1cdcdb910fb362231b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Yann Gautier
committed
on 18 Jan 2019
|
stm32mp1: rename stpmu1 to stpmic1
...
This is the correct name of the IP.
Rename stm32mp1_pmic files to stm32mp_pmic.
Change-Id: I238a7d1f9a1d099daf7788dc9ebbd3146ba2f15f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Yann Gautier
committed
on 18 Jan 2019
|