stm32mp1: set XN attribute for some areas in BL2 ...

DTB and BL32 area should not be set as executable in MMU during BL2
execution, hence set those areas as MT_RO_DATA.

Change-Id: I87c47a1e7fda761e541ec98a5b294588384d31db
Signed-off-by: Yann Gautier <yann.gautier@st.com>

stm32mp1: dynamically map DDR later and non-cacheable during its test ...

A speculative accesses to DDR could be done whereas it was not reachable
and could lead to bus stall.
To correct this the dynamic mapping in MMU is used.
A first mapping is done for DDR tests with MT_NON_CACHEABLE attribute,
once DDR access is setup. It is then unmapped and a new mapping DDR is done
with cacheable attribute (through MT_MEMORY) to speed-up BL33 (or OP-TEE)
load.

The disabling of cache during DDR tests is also removed, as now useless.
A call to new functions stm32mp_{,un}map_ddr_non_cacheable() is done
instead.

PLAT_XLAT_TABLES_DYNAMIC is activated globally as used in BL2 and BL32.

BL33 max size is also updated to take into account the secure and shared
memory areas. Those are used in OP-TEE case.

Change-Id: I22c48b4a48255ee264991c34ecbb15bfe87e67c3
Signed-off-by: Yann Gautier <yann.gautier@st.com>

stm32mp1: add a function to get non-secure DDR size ...

This function gets the DDR size from DT, and withdraws (if defined) the
sizes of secure DDR and shared memory areas.
This function also checks DT values fits the default DDR range.
This non-secure memory is available for BL33 and non-secure OS.

Change-Id: I162ae5e990a0f9b6b7d07e539de029f1d61a391b
Signed-off-by: Yann Gautier <yann.gautier@st.com>

plat/st: correctly check pwr-regulators node ...

This warning was issued by cppcheck in our downstream code:
[plat/st/common/stm32mp_dt.c:629] -> [plat/st/common/stm32mp_dt.c:634]:
 (warning) Identical condition 'node<0', second condition is always false

The second test has to check variable pwr_regulators_node.

Change-Id: I4a20c4a3ac0ef0639c2df36309d90a61c02b511f
Signed-off-by: Yann Gautier <yann.gautier@st.com>

plat/st: correct static analysis tool warning ...

Correct the following sparse warnings:
plat/st/common/stm32mp_dt.c:103:5: warning:
 symbol 'fdt_get_node_parent_address_cells' was not declared.
 Should it be static?
plat/st/common/stm32mp_dt.c:123:5: warning:
 symbol 'fdt_get_node_parent_size_cells' was not declared.
 Should it be static?

As those 2 functions are only used by assert(), put them under
ENABLE_ASSERTIONS flag.

Change-Id: Iad721f12128df83a3de3f53e7920a9c1dce64c56
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Merge changes from topic "stm32mp1-multi-image" into integration ...

* changes:
  stm32mp1: platform.mk: support generating multiple images in one build
  stm32mp1: platform.mk: migrate to implicit rules
  stm32mp1: platform.mk: derive map file name from target name
  stm32mp1: platform.mk: generate linker script with fixed name
  stm32mp1: platform.mk: use PHONY for the appropriate targets

stm32mp1: platform.mk: support generating multiple images in one build ...

Board Support for the stm32mp1 platform is contained in the device tree,
so if we remove hardcoding of board name from the Makefile, we can build
the intermediary objects once and generate one new tf-a-*.stm32 binary
for every device tree specified. All in one go.

With implicit rules implemented, we only need to change the top level
target to support multi-image builds on the stm32mp1.

Change-Id: I4cae7d32a4c03a3c29c559dc5332e002223902c1
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

stm32mp1: platform.mk: migrate to implicit rules ...

Board Support for the stm32mp1 platform is contained in the device tree,
so if we remove hardcoding of board name from the Makefile, we can build
the intermediary objects once and generate one new tf-a-*.stm32 binary
for every device tree specified. All in one go.

Prepare for this by employing implicit rules.

Change-Id: I5a022a89eb12696cd8cee7bf28ac6be54849901f
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

stm32mp1: platform.mk: derive map file name from target name ...

Doing this allows us in the next commit to use implicit rules (%-patterns)
to cover all the images we generate during a stm32mp1 build.

Change-Id: Ibde59d10ccce42566f82820117d7fd0d77345e6c
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

stm32mp1: platform.mk: generate linker script with fixed name ...

The linker script has no board-specific information that necessitates it
having a name derived from the board name. Give it a fixed name, so we
can later reuse the same linker script for multiple boards.

Change-Id: Ie6650f00389f4ab8577ae82a36c620af9c64101e
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

stm32mp1: platform.mk: use PHONY for the appropriate targets ...

Currently, building TF-A for STM32MP1 triggers a full rebuild,
avoid this by removing the .PHONY: specification for the final image and
replace it by specifying PHONYness for the targets that don't actually
produce file output.

This will come in handy in follow-up commits, when implicit rules are
introduced, as implicit rule search is skipped for .PHONY targets.

Change-Id: Ib9966479032b081a54123b99f889760e85639f19
Fixes: f74cbc93a ("stm32mp1: Link BL2, BL32 and DTB in one binary")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

stm32: Use generic console_t data structure ...

Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.

Change-Id: Iea6ca26ff4903c33f0fad27fec96fdbabd4e0a91
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Enable -Wredundant-decls warning check ...

This flag warns if anything is declared more than once in the same
scope, even in cases where multiple declaration is valid and changes
nothing.

Consequently, this patch also fixes the issues reported by this
flag. Consider the following two lines of code from two different source
files(bl_common.h and bl31_plat_setup.c):

IMPORT_SYM(uintptr_t, __RO_START__, BL_CODE_BASE);
IMPORT_SYM(unsigned long, __RO_START__, BL2_RO_BASE);

The IMPORT_SYM macro which actually imports a linker symbol as a C expression.
The macro defines the __RO_START__ as an extern variable twice, one for each
instance. __RO_START__ symbol is defined by the linker script to mark the start
of the Read-Only area of the memory map.

Essentially, the platform code redefines the linker symbol with a different
(relevant) name rather than using the standard symbol. A simple solution to
fix this issue in the platform code for redundant declarations warning is
to remove the second IMPORT_SYM and replace it with following assignment

static const unsigned long BL2_RO_BASE = BL_CODE_BASE;

Change-Id: If4835d1ee462d52b75e5afd2a59b64828707c5aa
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

st: Unify Platform specific defines for PSCI module ...

PLATFORM_CORE_COUNT - Unsigned int
PLATFORM_CLUSTER_COUNT - Unsigned int
PLATFORM_MAX_CPUS_PER_CLUSTER - Unsigned int
PLATFORM_CORE_COUNT_PER_CLUSTER - Unsigned int

Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: I3421336230981d4cda301fa2cef24b94b08353b1

stm32mp1: Add support for SPI-NOR boot device ...

STM32MP1 platform is able to boot from SPI-NOR devices.
These modifications add this support using the new
SPI-NOR framework.

Change-Id: I75ff9eba4661f9fb87ce24ced2bacbf8558ebe44
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

stm32mp1: Add support for SPI-NAND boot device ...

STM32MP1 platform is able to boot from SPI-NAND devices.
These modifications add this support using the new
SPI-NAND framework.

Change-Id: I0d5448bdc4bde153c1209e8043846c0f935ae5ba
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

stm32mp1: Add support for raw NAND boot device ...

STM32MP1 platform is able to boot from raw NAND devices.
These modifications add this support using the new
raw NAND framework.

Change-Id: I9e9c2b03930f98a5ac23f2b6b41945bef43e5043
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

stm32mp1: Reduce MAX_XLAT_TABLES to 4 ...

For STM32MP1, the address space is 4GB, which can be first divided
in 4 parts of 1GB. This LVL1 table is already mapped regardless
of MAX_XLAT_TABLES.
Fixing typo: Replace Ko to KB.

BL2/sp_min for platform STM32MP1 requires 4 MMU translation tables:
  - a level2 table and a level3 table for identity mapped SYSRAM
  - a level2 table mapping 2MB of BootROM runtime resources
  - a level2 table mapping 2MB of secure DDR (case BL32 is OP-TEE)

Change-Id: If80cbd4fccc7689b39dd540d6649b1313557f326
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

stm32mp: add DT helper for reg by name ...

Add a new entry to find register properties by name and
include new assert functions to limit address cells to 1
and size cells to 1.

Change-Id: Ide59a795a05fb2af36bd07fec15e5a3adf196226
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

stm32mp1: add compilation flags for boot devices ...

Adds compilation flags to specify which drivers will be
embedded in the generated firmware.

Change-Id: Ie9decc89c3f26cf17e7148a3a4cf337fd35940f7
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

plat/st: Fix incorrect return value ...

Change the return code in boot_api.h which impacts the
authentication result.

Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I2c3aadb98dd261ae5ad73978fc74a8a8cfa59b82
Reviewed-by: Yann GAUTIER <yann.gautier@st.com>

delay: timeout detection support ...

Introduce timeout_init_us/timeout_elapsed() delay tracking with CNTPCT.

timeout_init_us(some_timeout_us); returns a reference to detect
timeout for the provided microsecond delay value from current time.

timeout_elapsed(reference) return true/false whether the reference
timeout is elapsed.

Cherry picked from OP-TEE implementation [1].
  [1] commit 33d30a74502b ("core: timeout detection support")

Minor:
- Remove stm32mp platform duplicated implementation.
- Add new include in marvell ble.mk

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iaef6d43c11a2e6992fb48efdc674a0552755ad9c

stm32mp1: add authentication support for stm32image ...

This commit adds authentication binary support for STM32MP1.
It prints the bootrom authentication result if signed
image is used and authenticates the next loaded STM32 images.
It also enables the dynamic translation table support
(PLAT_XLAT_TABLES_DYNAMIC) to use bootrom services.

Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iba706519e0dc6b6fae1f3dd498383351f0f75f51

bsec: move bsec_mode_is_closed_device() service to platform ...

This BSEC service is a platform specific service. Implementation
moved to the platform part.

Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I1f70ed48a446860498ed111acce01187568538c9

stm32mp1: manage CONSOLE_FLAG_TRANSLATE_CRLF and cleanup driver ...

The STM32 console driver was pre-pending '\r' before '\n'.
It is now managed by the framework with the flag:
CONSOLE_FLAG_TRANSLATE_CRLF.
Remove the code in driver, and add the flag for STM32MP1.

Change-Id: I5d0d5d5c4abee0b7dc11c2f8707b1b5cf10149ab
Signed-off-by: Yann Gautier <yann.gautier@st.com>

stm32mp1: move check_header() to common code ...

This function can be used on several stm32mp devices, it is then moved in
plat/st/common/stm32mp_common.c.

Change-Id: I862debe39604410f71a9ddc28713026362e9ecda
Signed-off-by: Yann Gautier <yann.gautier@st.com>

stm32mp1: keep console during runtime ...

The runtime console is only kept in DEBUG configuration.

Change-Id: I0447dfcacb9a63a12bcdab7c55584d70c3220e5b
Signed-off-by: Yann Gautier <yann.gautier@st.com>

stm32mp1: sp_min: initialize MMU and cache earlier ...

This change enhances performance and security in BL32 stage.

Change-Id: I64df5995fc6b04f6cf42d6a00a6d3d0f602b5407
Signed-off-by: Yann Gautier <yann.gautier@st.com>

stm32mp1: add support for LpDDR3 ...

This change enables LpDDR3 initialization with PMIC.

Change-Id: I2409a808335dfacd69a8517cb8510cee98bb8161
Signed-off-by: Yann Gautier <yann.gautier@st.com>

stm32mp1: use a common function to check spinlock is available ...

To use spinlocks, MMU should be enabled, as well as data cache.
A common function is created (moved from clock file).
It is then used whenever a spinlock has to be taken, in BSEC and clock
drivers.

Change-Id: I94baed0114a2061ad71bd5287a91bf7f1c6821f6
Signed-off-by: Yann Gautier <yann.gautier@st.com>